#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
-#include <linux/ratelimit.h>
-#include <linux/dynamic_printk.h>
+#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>
#define _RET_IP_ (unsigned long)__builtin_return_address(0)
#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; })
-#ifdef CONFIG_LBD
+#ifdef CONFIG_LBDAF
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
#else
#define KERN_INFO "<6>" /* informational */
#define KERN_DEBUG "<7>" /* debug-level messages */
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT "<d>"
/*
* Annotation for a "continued" line of log printout (only done after a
* line that had no enclosing \n). Only to be used by core/arch code
* during early bootup (a continued line is not SMP-safe otherwise).
*/
-#define KERN_CONT ""
+#define KERN_CONT "<c>"
extern int console_printk[];
#endif
#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
- void __might_sleep(char *file, int line);
+ void __might_sleep(char *file, int line, int preempt_offset);
/**
* might_sleep - annotation for functions that can sleep
*
* supposed to.
*/
# define might_sleep() \
- do { __might_sleep(__FILE__, __LINE__); might_resched(); } while (0)
+ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
#else
+ static inline void __might_sleep(char *file, int line, int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
#endif
#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
#define abs(x) ({ \
- int __x = (x); \
+ long __x = (x); \
(__x < 0) ? -__x : __x; \
})
asmlinkage int printk(const char * fmt, ...)
__attribute__ ((format (printf, 1, 2))) __cold;
-extern struct ratelimit_state printk_ratelimit_state;
-extern int printk_ratelimit(void);
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
unsigned int interval_msec);
+extern int printk_delay_msec;
+
/*
* Print a one-time message (analogous to WARN_ONCE() et al):
*/
#define printk_once(x...) ({ \
- static int __print_once = 1; \
+ static bool __print_once; \
\
- if (__print_once) { \
- __print_once = 0; \
+ if (!__print_once) { \
+ __print_once = true; \
printk(x); \
} \
})
+void log_buf_kexec_setup(void);
#else
static inline int vprintk(const char *s, va_list args)
__attribute__ ((format (printf, 1, 0)));
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_once(x...) printk(x)
+static inline void log_buf_kexec_setup(void)
+{
+}
#endif
extern int printk_needs_cpu(int cpu);
extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
+extern int panic_on_io_nmi;
extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info(fmt, ...) \
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+ printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_PRINTK_DEBUG)
-#define pr_debug(fmt, ...) do { \
- dynamic_pr_debug(pr_fmt(fmt), ##__VA_ARGS__); \
- } while (0)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+ dynamic_pr_debug(fmt, ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif
/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...) ({ \
+ static struct ratelimit_state _rs = { \
+ .interval = DEFAULT_RATELIMIT_INTERVAL, \
+ .burst = DEFAULT_RATELIMIT_BURST, \
+ }; \
+ \
+ if (!__ratelimit(&_rs)) \
+ printk(fmt, ##__VA_ARGS__); \
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_notice_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+ ##__VA_ARGS__); 0; })
+#endif
+
+/*
* General tracing related utility functions - trace_printk(),
* tracing_on/tracing_off and tracing_start()/tracing_stop
*
* Use tracing_on/tracing_off when you want to quickly turn on or off
* tracing. It simply enables or disables the recording of the trace events.
- * This also corresponds to the user space debugfs/tracing/tracing_on
+ * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
* file, which gives a means for the kernel and userspace to interact.
* Place a tracing_off() in the kernel where you want tracing to end.
* From user space, examine the trace, and then echo 1 > tracing_on
extern void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);
+static inline void __attribute__ ((format (printf, 1, 2)))
+____trace_printk_check_format(const char *fmt, ...)
+{
+}
+#define __trace_printk_check_format(fmt, args...) \
+do { \
+ if (0) \
+ ____trace_printk_check_format(fmt, ##args); \
+} while (0)
+
/**
* trace_printk - printf formatting in the ftrace buffer
* @fmt: the printf format for printing
* Please refrain from leaving trace_printks scattered around in
* your code.
*/
-# define trace_printk(fmt...) __trace_printk(_THIS_IP_, fmt)
+
+#define trace_printk(fmt, args...) \
+do { \
+ __trace_printk_check_format(fmt, ##args); \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
+ } else \
+ __trace_printk(_THIS_IP_, fmt, ##args); \
+} while (0)
+
+extern int
+__trace_bprintk(unsigned long ip, const char *fmt, ...)
+ __attribute__ ((format (printf, 2, 3)));
+
extern int
__trace_printk(unsigned long ip, const char *fmt, ...)
__attribute__ ((format (printf, 2, 3)));
-# define ftrace_vprintk(fmt, ap) __trace_printk(_THIS_IP_, fmt, ap)
+
+/*
+ * The double __builtin_constant_p is because gcc will give us an error
+ * if we try to allocate the static variable to fmt if it is not a
+ * constant. Even with the outer if statement.
+ */
+#define ftrace_vprintk(fmt, vargs) \
+do { \
+ if (__builtin_constant_p(fmt)) { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
+ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \
+ } else \
+ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \
+} while (0)
+
+extern int
+__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);
+
extern int
__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);
+
extern void ftrace_dump(void);
#else
static inline void
return 0;
}
static inline void ftrace_dump(void) { }
-#endif
+#endif /* CONFIG_TRACING */
/*
* Display an IP address in readable format.
((unsigned char *)&addr)[3]
#define NIPQUAD_FMT "%u.%u.%u.%u"
-#if defined(__LITTLE_ENDIAN)
-#define HIPQUAD(addr) \
- ((unsigned char *)&addr)[3], \
- ((unsigned char *)&addr)[2], \
- ((unsigned char *)&addr)[1], \
- ((unsigned char *)&addr)[0]
-#elif defined(__BIG_ENDIAN)
-#define HIPQUAD NIPQUAD
-#else
-#error "Please fix asm/byteorder.h"
-#endif /* __LITTLE_ENDIAN */
-
/*
* min()/max()/clamp() macros that also do
* strict type-checking.. See the
#endif /* __KERNEL__ */
+#ifndef __EXPORTED_HEADERS__
+#ifndef __KERNEL__
+#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
+#endif /* __KERNEL__ */
+#endif /* __EXPORTED_HEADERS__ */
+
#define SI_LOAD_SHIFT 16
struct sysinfo {
long uptime; /* Seconds since boot */
};
/* Force a compilation error if condition is true */
-#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition))
+
+/* Force a compilation error if condition is constant and true */
+#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))
/* Force a compilation error if condition is true, but also produce a
result (of value 0 and type size_t), so the expression can be used
e.g. in a structure initializer (or where-ever else comma expressions
aren't permitted). */
-#define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1)
+#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
+#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))
/* Trap pasters of __FUNCTION__ at compile-time */
#define __FUNCTION__ (__func__)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff