#include <linux/types.h>
#include <asm/byteorder.h>
+/*
+ * DS bit usage
+ *
+ * TA = transmitter address
+ * RA = receiver address
+ * DA = destination address
+ * SA = source address
+ *
+ * ToDS FromDS A1(RA) A2(TA) A3 A4 Use
+ * -----------------------------------------------------------------
+ * 0 0 DA SA BSSID - IBSS/DLS
+ * 0 1 DA BSSID SA - AP -> STA
+ * 1 0 BSSID SA DA - AP <- STA
+ * 1 1 RA TA DA SA unspecified (WDS)
+ */
+
#define FCS_LEN 4
#define IEEE80211_FCTL_VERS 0x0003
#define IEEE80211_MAX_FRAME_LEN 2352
#define IEEE80211_MAX_SSID_LEN 32
+
#define IEEE80211_MAX_MESH_ID_LEN 32
+
#define IEEE80211_QOS_CTL_LEN 2
#define IEEE80211_QOS_CTL_TID_MASK 0x000F
#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
}
/**
- * ieee80211_is_nullfunc - check if FTYPE=IEEE80211_FTYPE_DATA and STYPE=IEEE80211_STYPE_NULLFUNC
+ * ieee80211_is_nullfunc - check if frame is a regular (non-QoS) nullfunc frame
* @fc: frame control bytes in little-endian byteorder
*/
static inline int ieee80211_is_nullfunc(__le16 fc)
cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC);
}
+/**
+ * ieee80211_is_qos_nullfunc - check if frame is a QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline int ieee80211_is_qos_nullfunc(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_QOS_NULLFUNC);
+}
+
struct ieee80211s_hdr {
u8 flags;
u8 ttl;
/* Mesh flags */
#define MESH_FLAGS_AE_A4 0x1
#define MESH_FLAGS_AE_A5_A6 0x2
+#define MESH_FLAGS_AE 0x3
#define MESH_FLAGS_PS_DEEP 0x4
/**
u8 dtim_period;
u8 bitmap_ctrl;
/* variable size: 1 - 251 bytes */
- u8 virtual_map[0];
+ u8 virtual_map[1];
} __attribute__ ((packed));
+/**
+ * struct ieee80211_meshconf_ie
+ *
+ * This structure refers to "Mesh Configuration information element"
+ */
+struct ieee80211_meshconf_ie {
+ u8 meshconf_psel;
+ u8 meshconf_pmetric;
+ u8 meshconf_congest;
+ u8 meshconf_synch;
+ u8 meshconf_auth;
+ u8 meshconf_form;
+ u8 meshconf_cap;
+} __attribute__ ((packed));
+
+/**
+ * struct ieee80211_rann_ie
+ *
+ * This structure refers to "Root Announcement information element"
+ */
+struct ieee80211_rann_ie {
+ u8 rann_flags;
+ u8 rann_hopcount;
+ u8 rann_ttl;
+ u8 rann_addr[6];
+ u32 rann_seq;
+ u32 rann_metric;
+} __attribute__ ((packed));
+
+#define WLAN_SA_QUERY_TR_ID_LEN 2
+
struct ieee80211_mgmt {
__le16 frame_control;
__le16 duration;
u8 action_code;
u8 variable[0];
} __attribute__((packed)) mesh_action;
+ struct {
+ u8 action;
+ u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN];
+ } __attribute__ ((packed)) sa_query;
} u;
} __attribute__ ((packed)) action;
} u;
#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
+/* Management MIC information element (IEEE 802.11w) */
+struct ieee80211_mmie {
+ u8 element_id;
+ u8 length;
+ __le16 key_id;
+ u8 sequence_number[6];
+ u8 mic[8];
+} __attribute__ ((packed));
+
/* Control frames */
struct ieee80211_rts {
__le16 frame_control;
u8 ra[6];
} __attribute__ ((packed));
+struct ieee80211_pspoll {
+ __le16 frame_control;
+ __le16 aid;
+ u8 bssid[6];
+ u8 ta[6];
+} __attribute__ ((packed));
+
/**
* struct ieee80211_bar - HT Block Ack Request
*
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
+/*
+ * Maximum length of AMPDU that the STA can receive.
+ * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+ */
+enum ieee80211_max_ampdu_length_exp {
+ IEEE80211_HT_MAX_AMPDU_8K = 0,
+ IEEE80211_HT_MAX_AMPDU_16K = 1,
+ IEEE80211_HT_MAX_AMPDU_32K = 2,
+ IEEE80211_HT_MAX_AMPDU_64K = 3
+};
+
+#define IEEE80211_HT_MAX_AMPDU_FACTOR 13
+
+/* Minimum MPDU start spacing */
+enum ieee80211_min_mpdu_spacing {
+ IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */
+ IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */
+ IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */
+ IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */
+ IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */
+ IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */
+ IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */
+ IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */
+};
+
/**
* struct ieee80211_ht_info - HT information
*
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define WLAN_AUTH_SHARED_KEY 1
-#define WLAN_AUTH_FAST_BSS_TRANSITION 2
+#define WLAN_AUTH_FT 2
#define WLAN_AUTH_LEAP 128
#define WLAN_AUTH_CHALLENGE_LEN 128
/* 802.11g */
WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME = 25,
WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM = 26,
+ /* 802.11w */
+ WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY = 30,
+ WLAN_STATUS_ROBUST_MGMT_FRAME_POLICY_VIOLATION = 31,
/* 802.11i */
WLAN_STATUS_INVALID_IE = 40,
WLAN_STATUS_INVALID_GROUP_CIPHER = 41,
WLAN_EID_PREQ = 68,
WLAN_EID_PREP = 69,
WLAN_EID_PERR = 70,
+ WLAN_EID_RANN = 49, /* compatible with FreeBSD */
/* 802.11h */
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
WLAN_EID_HT_INFORMATION = 61,
/* 802.11i */
WLAN_EID_RSN = 48,
+ WLAN_EID_TIMEOUT_INTERVAL = 56,
+ WLAN_EID_MMIE = 76 /* 802.11w */,
WLAN_EID_WPA = 221,
WLAN_EID_GENERIC = 221,
WLAN_EID_VENDOR_SPECIFIC = 221,
WLAN_CATEGORY_QOS = 1,
WLAN_CATEGORY_DLS = 2,
WLAN_CATEGORY_BACK = 3,
+ WLAN_CATEGORY_PUBLIC = 4,
+ WLAN_CATEGORY_HT = 7,
+ WLAN_CATEGORY_SA_QUERY = 8,
+ WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
WLAN_CATEGORY_WMM = 17,
+ WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
+ WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
/* SPECTRUM_MGMT action code */
WLAN_ACTION_SPCT_CHL_SWITCH = 4,
};
+/* Security key length */
+enum ieee80211_key_len {
+ WLAN_KEY_LEN_WEP40 = 5,
+ WLAN_KEY_LEN_WEP104 = 13,
+ WLAN_KEY_LEN_CCMP = 16,
+ WLAN_KEY_LEN_TKIP = 32,
+ WLAN_KEY_LEN_AES_CMAC = 16,
+};
+
+/*
+ * IEEE 802.11-2007 7.3.2.9 Country information element
+ *
+ * Minimum length is 8 octets, ie len must be evenly
+ * divisible by 2
+ */
+
+/* Although the spec says 8 I'm seeing 6 in practice */
+#define IEEE80211_COUNTRY_IE_MIN_LEN 6
+
+/*
+ * For regulatory extension stuff see IEEE 802.11-2007
+ * Annex I (page 1141) and Annex J (page 1147). Also
+ * review 7.3.2.9.
+ *
+ * When dot11RegulatoryClassesRequired is true and the
+ * first_channel/reg_extension_id is >= 201 then the IE
+ * compromises of the 'ext' struct represented below:
+ *
+ * - Regulatory extension ID - when generating IE this just needs
+ * to be monotonically increasing for each triplet passed in
+ * the IE
+ * - Regulatory class - index into set of rules
+ * - Coverage class - index into air propagation time (Table 7-27),
+ * in microseconds, you can compute the air propagation time from
+ * the index by multiplying by 3, so index 10 yields a propagation
+ * of 10 us. Valid values are 0-31, values 32-255 are not defined
+ * yet. A value of 0 inicates air propagation of <= 1 us.
+ *
+ * See also Table I.2 for Emission limit sets and table
+ * I.3 for Behavior limit sets. Table J.1 indicates how to map
+ * a reg_class to an emission limit set and behavior limit set.
+ */
+#define IEEE80211_COUNTRY_EXTENSION_ID 201
+
+/*
+ * Channels numbers in the IE must be monotonically increasing
+ * if dot11RegulatoryClassesRequired is not true.
+ *
+ * If dot11RegulatoryClassesRequired is true consecutive
+ * subband triplets following a regulatory triplet shall
+ * have monotonically increasing first_channel number fields.
+ *
+ * Channel numbers shall not overlap.
+ *
+ * Note that max_power is signed.
+ */
+struct ieee80211_country_ie_triplet {
+ union {
+ struct {
+ u8 first_channel;
+ u8 num_channels;
+ s8 max_power;
+ } __attribute__ ((packed)) chans;
+ struct {
+ u8 reg_extension_id;
+ u8 reg_class;
+ u8 coverage_class;
+ } __attribute__ ((packed)) ext;
+ };
+} __attribute__ ((packed));
+
+enum ieee80211_timeout_interval_type {
+ WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */,
+ WLAN_TIMEOUT_KEY_LIFETIME = 2 /* 802.11r */,
+ WLAN_TIMEOUT_ASSOC_COMEBACK = 3 /* 802.11w */,
+};
+
/* BACK action code */
enum ieee80211_back_actioncode {
WLAN_ACTION_ADDBA_REQ = 0,
WLAN_BACK_TIMER = 2,
};
+/* SA Query action */
+enum ieee80211_sa_query_action {
+ WLAN_ACTION_SA_QUERY_REQUEST = 0,
+ WLAN_ACTION_SA_QUERY_RESPONSE = 1,
+};
+
+
/* A-MSDU 802.11n */
#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
/* reserved: 0x000FAC03 */
#define WLAN_CIPHER_SUITE_CCMP 0x000FAC04
#define WLAN_CIPHER_SUITE_WEP104 0x000FAC05
+#define WLAN_CIPHER_SUITE_AES_CMAC 0x000FAC06
+
+/* AKM suite selectors */
+#define WLAN_AKM_SUITE_8021X 0x000FAC01
+#define WLAN_AKM_SUITE_PSK 0x000FAC02
#define WLAN_MAX_KEY_LEN 32
+#define WLAN_PMKID_LEN 16
+
/**
* ieee80211_get_qos_ctl - get pointer to qos control bytes
* @hdr: the frame
return hdr->addr1;
}
+/**
+ * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
+ * @hdr: the frame (buffer must include at least the first octet of payload)
+ */
+static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
+{
+ if (ieee80211_is_disassoc(hdr->frame_control) ||
+ ieee80211_is_deauth(hdr->frame_control))
+ return true;
+
+ if (ieee80211_is_action(hdr->frame_control)) {
+ u8 *category;
+
+ /*
+ * Action frames, excluding Public Action frames, are Robust
+ * Management Frames. However, if we are looking at a Protected
+ * frame, skip the check since the data may be encrypted and
+ * the frame has already been found to be a Robust Management
+ * Frame (by the other end).
+ */
+ if (ieee80211_has_protected(hdr->frame_control))
+ return true;
+ category = ((u8 *) hdr) + 24;
+ return *category != WLAN_CATEGORY_PUBLIC &&
+ *category != WLAN_CATEGORY_HT &&
+ *category != WLAN_CATEGORY_VENDOR_SPECIFIC;
+ }
+
+ return false;
+}
+
+/**
+ * ieee80211_fhss_chan_to_freq - get channel frequency
+ * @channel: the FHSS channel
+ *
+ * Convert IEEE802.11 FHSS channel to frequency (MHz)
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_fhss_chan_to_freq(int channel)
+{
+ if ((channel > 1) && (channel < 96))
+ return channel + 2400;
+ else
+ return -1;
+}
+
+/**
+ * ieee80211_freq_to_fhss_chan - get channel
+ * @freq: the channels frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 FHSS channel
+ * Ref IEEE 802.11-2007 section 14.6
+ */
+static inline int ieee80211_freq_to_fhss_chan(int freq)
+{
+ if ((freq > 2401) && (freq < 2496))
+ return freq - 2400;
+ else
+ return -1;
+}
+
+/**
+ * ieee80211_dsss_chan_to_freq - get channel center frequency
+ * @channel: the DSSS channel
+ *
+ * Convert IEEE802.11 DSSS channel to the center frequency (MHz).
+ * Ref IEEE 802.11-2007 section 15.6
+ */
+static inline int ieee80211_dsss_chan_to_freq(int channel)
+{
+ if ((channel > 0) && (channel < 14))
+ return 2407 + (channel * 5);
+ else if (channel == 14)
+ return 2484;
+ else
+ return -1;
+}
+
+/**
+ * ieee80211_freq_to_dsss_chan - get channel
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 DSSS channel
+ * Ref IEEE 802.11-2007 section 15.6
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_dsss_chan(int freq)
+{
+ if ((freq >= 2410) && (freq < 2475))
+ return (freq - 2405) / 5;
+ else if ((freq >= 2482) && (freq < 2487))
+ return 14;
+ else
+ return -1;
+}
+
+/* Convert IEEE802.11 HR DSSS channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 18.4.6.2
+ *
+ * The channels and frequencies are the same as those defined for DSSS
+ */
+#define ieee80211_hr_chan_to_freq(chan) ieee80211_dsss_chan_to_freq(chan)
+#define ieee80211_freq_to_hr_chan(freq) ieee80211_freq_to_dsss_chan(freq)
+
+/* Convert IEEE802.11 ERP channel to frequency (MHz) and back
+ * Ref IEEE 802.11-2007 section 19.4.2
+ */
+#define ieee80211_erp_chan_to_freq(chan) ieee80211_hr_chan_to_freq(chan)
+#define ieee80211_freq_to_erp_chan(freq) ieee80211_freq_to_hr_chan(freq)
+
+/**
+ * ieee80211_ofdm_chan_to_freq - get channel center frequency
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @channel: the OFDM channel
+ *
+ * Convert IEEE802.11 OFDM channel to center frequency (MHz)
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ */
+static inline int ieee80211_ofdm_chan_to_freq(int s_freq, int channel)
+{
+ if ((channel > 0) && (channel <= 200) &&
+ (s_freq >= 4000))
+ return s_freq + (channel * 5);
+ else
+ return -1;
+}
+
+/**
+ * ieee80211_freq_to_ofdm_channel - get channel
+ * @s_freq: starting frequency == (dotChannelStartingFactor/2) MHz
+ * @freq: the frequency
+ *
+ * Convert frequency (MHz) to IEEE802.11 OFDM channel
+ * Ref IEEE 802.11-2007 section 17.3.8.3.2
+ *
+ * This routine selects the channel with the closest center frequency.
+ */
+static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq)
+{
+ if ((freq > (s_freq + 2)) && (freq <= (s_freq + 1202)) &&
+ (s_freq >= 4000))
+ return (freq + 2 - s_freq) / 5;
+ else
+ return -1;
+}
+
+/**
+ * ieee80211_tu_to_usec - convert time units (TU) to microseconds
+ * @tu: the TUs
+ */
+static inline unsigned long ieee80211_tu_to_usec(unsigned long tu)
+{
+ return 1024 * tu;
+}
+
+/**
+ * ieee80211_check_tim - check if AID bit is set in TIM
+ * @tim: the TIM IE
+ * @tim_len: length of the TIM IE
+ * @aid: the AID to look for
+ */
+static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim,
+ u8 tim_len, u16 aid)
+{
+ u8 mask;
+ u8 index, indexn1, indexn2;
+
+ if (unlikely(!tim || tim_len < sizeof(*tim)))
+ return false;
+
+ aid &= 0x3fff;
+ index = aid / 8;
+ mask = 1 << (aid & 7);
+
+ indexn1 = tim->bitmap_ctrl & 0xfe;
+ indexn2 = tim_len + indexn1 - 4;
+
+ if (index < indexn1 || index > indexn2)
+ return false;
+
+ index -= indexn1;
+
+ return !!(tim->virtual_map[index] & mask);
+}
+
#endif /* LINUX_IEEE80211_H */