#define WRITE_SYNC_PLUG (WRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define WRITE_SYNC (WRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
#define WRITE_ODIRECT_PLUG (WRITE | (1 << BIO_RW_SYNCIO))
+#define WRITE_META (WRITE | (1 << BIO_RW_META))
#define SWRITE_SYNC_PLUG \
(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
extern void send_sigio(struct fown_struct *fown, int fd, int band);
-/* fs/sync.c */
-extern int do_sync_mapping_range(struct address_space *mapping, loff_t offset,
- loff_t endbyte, unsigned int flags);
-
#ifdef CONFIG_FILE_LOCKING
extern int fcntl_getlk(struct file *, struct flock __user *);
extern int fcntl_setlk(unsigned int, struct file *, unsigned int,
* until that flag is cleared. I_WILL_FREE, I_FREEING and I_CLEAR are set at
* various stages of removing an inode.
*
- * Two bits are used for locking and completion notification, I_LOCK and I_SYNC.
+ * Two bits are used for locking and completion notification, I_NEW and I_SYNC.
*
* I_DIRTY_SYNC Inode is dirty, but doesn't have to be written on
* fdatasync(). i_atime is the usual cause.
* don't have to write inode on fdatasync() when only
* mtime has changed in it.
* I_DIRTY_PAGES Inode has dirty pages. Inode itself may be clean.
- * I_NEW get_new_inode() sets i_state to I_LOCK|I_NEW. Both
- * are cleared by unlock_new_inode(), called from iget().
+ * I_NEW Serves as both a mutex and completion notification.
+ * New inodes set I_NEW. If two processes both create
+ * the same inode, one of them will release its inode and
+ * wait for I_NEW to be released before returning.
+ * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
+ * also cause waiting on I_NEW, without I_NEW actually
+ * being set. find_inode() uses this to prevent returning
+ * nearly-dead inodes.
* I_WILL_FREE Must be set when calling write_inode_now() if i_count
* is zero. I_FREEING must be set when I_WILL_FREE is
* cleared.
* prohibited for many purposes. iget() must wait for
* the inode to be completely released, then create it
* anew. Other functions will just ignore such inodes,
- * if appropriate. I_LOCK is used for waiting.
+ * if appropriate. I_NEW is used for waiting.
*
- * I_LOCK Serves as both a mutex and completion notification.
- * New inodes set I_LOCK. If two processes both create
- * the same inode, one of them will release its inode and
- * wait for I_LOCK to be released before returning.
- * Inodes in I_WILL_FREE, I_FREEING or I_CLEAR state can
- * also cause waiting on I_LOCK, without I_LOCK actually
- * being set. find_inode() uses this to prevent returning
- * nearly-dead inodes.
- * I_SYNC Similar to I_LOCK, but limited in scope to writeback
- * of inode dirty data. Having a separate lock for this
- * purpose reduces latency and prevents some filesystem-
- * specific deadlocks.
+ * I_SYNC Synchonized write of dirty inode data. The bits is
+ * set during data writeback, and cleared with a wakeup
+ * on the bit address once it is done.
*
* Q: What is the difference between I_WILL_FREE and I_FREEING?
- * Q: igrab() only checks on (I_FREEING|I_WILL_FREE). Should it also check on
- * I_CLEAR? If not, why?
*/
#define I_DIRTY_SYNC 1
#define I_DIRTY_DATASYNC 2
#define I_DIRTY_PAGES 4
-#define I_NEW 8
+#define __I_NEW 3
+#define I_NEW (1 << __I_NEW)
#define I_WILL_FREE 16
#define I_FREEING 32
#define I_CLEAR 64
-#define __I_LOCK 7
-#define I_LOCK (1 << __I_LOCK)
-#define __I_SYNC 8
+#define __I_SYNC 7
#define I_SYNC (1 << __I_SYNC)
#define I_DIRTY (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_PAGES)
__insert_inode_hash(inode, inode->i_ino);
}
-extern struct file * get_empty_filp(void);
extern void file_move(struct file *f, struct list_head *list);
extern void file_kill(struct file *f);
#ifdef CONFIG_BLOCK
int lock_type);
enum {
- DIO_LOCKING = 1, /* need locking between buffered and direct access */
- DIO_NO_LOCKING, /* bdev; no locking at all between buffered/direct */
- DIO_OWN_LOCKING, /* filesystem locks buffered and direct internally */
+ /* need locking between buffered and direct access */
+ DIO_LOCKING = 0x01,
+
+ /* filesystem does not support filling holes */
+ DIO_SKIP_HOLES = 0x02,
};
static inline ssize_t blockdev_direct_IO(int rw, struct kiocb *iocb,
dio_iodone_t end_io)
{
return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, DIO_LOCKING);
+ nr_segs, get_block, end_io,
+ DIO_LOCKING | DIO_SKIP_HOLES);
}
static inline ssize_t blockdev_direct_IO_no_locking(int rw, struct kiocb *iocb,
dio_iodone_t end_io)
{
return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, DIO_NO_LOCKING);
-}
-
-static inline ssize_t blockdev_direct_IO_own_locking(int rw, struct kiocb *iocb,
- struct inode *inode, struct block_device *bdev, const struct iovec *iov,
- loff_t offset, unsigned long nr_segs, get_block_t get_block,
- dio_iodone_t end_io)
-{
- return __blockdev_direct_IO(rw, iocb, inode, bdev, iov, offset,
- nr_segs, get_block, end_io, DIO_OWN_LOCKING);
+ nr_segs, get_block, end_io, 0);
}
#endif
extern int generic_readlink(struct dentry *, char __user *, int);
extern void generic_fillattr(struct inode *, struct kstat *);
extern int vfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
+void __inode_add_bytes(struct inode *inode, loff_t bytes);
void inode_add_bytes(struct inode *inode, loff_t bytes);
void inode_sub_bytes(struct inode *inode, loff_t bytes);
loff_t inode_get_bytes(struct inode *inode);
int __init get_filesystem_list(char *buf);
+#define ACC_MODE(x) ("\000\004\002\006"[(x)&O_ACCMODE])
+#define OPEN_FMODE(flag) ((__force fmode_t)((flag + 1) & O_ACCMODE))
+
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff