string: factorize skip_spaces and export it to be generally available
[safe/jmp/linux-2.6] / include / linux / ethtool.h
index cf2abec..ef4a2d8 100644 (file)
@@ -7,11 +7,13 @@
  * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
  *                                christopher.leech@intel.com,
  *                                scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
  */
 
 #ifndef _LINUX_ETHTOOL_H
 #define _LINUX_ETHTOOL_H
 
+#include <linux/types.h>
 
 /* This should work for both 32 and 64 bit userland. */
 struct ethtool_cmd {
@@ -24,22 +26,42 @@ struct ethtool_cmd {
        __u8    phy_address;
        __u8    transceiver;    /* Which transceiver to use */
        __u8    autoneg;        /* Enable or disable autonegotiation */
+       __u8    mdio_support;
        __u32   maxtxpkt;       /* Tx pkts before generating tx int */
        __u32   maxrxpkt;       /* Rx pkts before generating rx int */
-       __u32   reserved[4];
+       __u16   speed_hi;
+       __u8    eth_tp_mdix;
+       __u8    reserved2;
+       __u32   lp_advertising; /* Features the link partner advertises */
+       __u32   reserved[2];
 };
 
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+                                               __u32 speed)
+{
+
+       ep->speed = (__u16)speed;
+       ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+       return (ep->speed_hi << 16) | ep->speed;
+}
+
+#define ETHTOOL_FWVERS_LEN     32
 #define ETHTOOL_BUSINFO_LEN    32
 /* these strings are set to whatever the driver author decides... */
 struct ethtool_drvinfo {
        __u32   cmd;
        char    driver[32];     /* driver short name, "tulip", "eepro100" */
        char    version[32];    /* driver version string */
-       char    fw_version[32]; /* firmware version string, if applicable */
+       char    fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
        char    bus_info[ETHTOOL_BUSINFO_LEN];  /* Bus info for this IF. */
                                /* For PCI devices, use pci_name(pci_dev). */
        char    reserved1[32];
-       char    reserved2[16];
+       char    reserved2[12];
+       __u32   n_priv_flags;   /* number of flags valid in ETHTOOL_GPFLAGS */
        __u32   n_stats;        /* number of u64's from ETHTOOL_GSTATS */
        __u32   testinfo_len;
        __u32   eedump_len;     /* Size of data from ETHTOOL_GEEPROM (bytes) */
@@ -219,6 +241,7 @@ struct ethtool_pauseparam {
 enum ethtool_stringset {
        ETH_SS_TEST             = 0,
        ETH_SS_STATS,
+       ETH_SS_PRIV_FLAGS,
 };
 
 /* for passing string sets for data tagging */
@@ -256,23 +279,121 @@ struct ethtool_perm_addr {
        __u8    data[0];
 };
 
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present.  When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+       ETH_FLAG_LRO            = (1 << 15),    /* LRO is enabled */
+};
+
+/* The following structures are for supporting RX network flow
+ * classification configuration. Note, all multibyte fields, e.g.,
+ * ip4src, ip4dst, psrc, pdst, spi, etc. are expected to be in network
+ * byte order.
+ */
+struct ethtool_tcpip4_spec {
+       __be32  ip4src;
+       __be32  ip4dst;
+       __be16  psrc;
+       __be16  pdst;
+       __u8    tos;
+};
+
+struct ethtool_ah_espip4_spec {
+       __be32  ip4src;
+       __be32  ip4dst;
+       __be32  spi;
+       __u8    tos;
+};
+
+struct ethtool_rawip4_spec {
+       __be32  ip4src;
+       __be32  ip4dst;
+       __u8    hdata[64];
+};
+
+struct ethtool_ether_spec {
+       __be16  ether_type;
+       __u8    frame_size;
+       __u8    eframe[16];
+};
+
+#define        ETH_RX_NFC_IP4  1
+#define        ETH_RX_NFC_IP6  2
+
+struct ethtool_usrip4_spec {
+       __be32  ip4src;
+       __be32  ip4dst;
+       __be32  l4_4_bytes;
+       __u8    tos;
+       __u8    ip_ver;
+       __u8    proto;
+};
+
+struct ethtool_rx_flow_spec {
+       __u32           flow_type;
+       union {
+               struct ethtool_tcpip4_spec              tcp_ip4_spec;
+               struct ethtool_tcpip4_spec              udp_ip4_spec;
+               struct ethtool_tcpip4_spec              sctp_ip4_spec;
+               struct ethtool_ah_espip4_spec           ah_ip4_spec;
+               struct ethtool_ah_espip4_spec           esp_ip4_spec;
+               struct ethtool_rawip4_spec              raw_ip4_spec;
+               struct ethtool_ether_spec               ether_spec;
+               struct ethtool_usrip4_spec              usr_ip4_spec;
+               __u8                                    hdata[64];
+       } h_u, m_u; /* entry, mask */
+       __u64           ring_cookie;
+       __u32           location;
+};
+
+struct ethtool_rxnfc {
+       __u32                           cmd;
+       __u32                           flow_type;
+       /* The rx flow hash value or the rule DB size */
+       __u64                           data;
+       struct ethtool_rx_flow_spec     fs;
+       __u32                           rule_cnt;
+       __u32                           rule_locs[0];
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME     128
+enum ethtool_flash_op_type {
+       ETHTOOL_FLASH_ALL_REGIONS       = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+       __u32   cmd;
+       __u32   region;
+       char    data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
 #ifdef __KERNEL__
 
 struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
 u32 ethtool_op_get_link(struct net_device *dev);
+u32 ethtool_op_get_rx_csum(struct net_device *dev);
 u32 ethtool_op_get_tx_csum(struct net_device *dev);
 int ethtool_op_set_tx_csum(struct net_device *dev, u32 data);
 int ethtool_op_set_tx_hw_csum(struct net_device *dev, u32 data);
+int ethtool_op_set_tx_ipv6_csum(struct net_device *dev, u32 data);
 u32 ethtool_op_get_sg(struct net_device *dev);
 int ethtool_op_set_sg(struct net_device *dev, u32 data);
 u32 ethtool_op_get_tso(struct net_device *dev);
 int ethtool_op_set_tso(struct net_device *dev, u32 data);
-int ethtool_op_get_perm_addr(struct net_device *dev, 
-                            struct ethtool_perm_addr *addr, u8 *data);
 u32 ethtool_op_get_ufo(struct net_device *dev);
 int ethtool_op_set_ufo(struct net_device *dev, u32 data);
+u32 ethtool_op_get_flags(struct net_device *dev);
+int ethtool_op_set_flags(struct net_device *dev, u32 data);
 
 /**
  * &ethtool_ops - Alter and report network device settings
@@ -293,7 +414,7 @@ int ethtool_op_set_ufo(struct net_device *dev, u32 data);
  * get_ringparam: Report ring sizes
  * set_ringparam: Set ring sizes
  * get_pauseparam: Report pause parameters
- * set_pauseparam: Set pause paramters
+ * set_pauseparam: Set pause parameters
  * get_rx_csum: Report whether receive checksums are turned on or off
  * set_rx_csum: Turn receive checksum on or off
  * get_tx_csum: Report whether transmit checksums are turned on or off
@@ -308,7 +429,8 @@ int ethtool_op_set_ufo(struct net_device *dev, u32 data);
  * get_strings: Return a set of strings that describe the requested objects 
  * phys_id: Identify the device
  * get_stats: Return statistics about the device
- * get_perm_addr: Gets the permanent hardware address
+ * get_flags: get 32-bit flags bitmap
+ * set_flags: set 32-bit flags bitmap
  * 
  * Description:
  *
@@ -361,17 +483,23 @@ struct ethtool_ops {
        int     (*set_sg)(struct net_device *, u32);
        u32     (*get_tso)(struct net_device *);
        int     (*set_tso)(struct net_device *, u32);
-       int     (*self_test_count)(struct net_device *);
        void    (*self_test)(struct net_device *, struct ethtool_test *, u64 *);
        void    (*get_strings)(struct net_device *, u32 stringset, u8 *);
        int     (*phys_id)(struct net_device *, u32);
-       int     (*get_stats_count)(struct net_device *);
        void    (*get_ethtool_stats)(struct net_device *, struct ethtool_stats *, u64 *);
-       int     (*get_perm_addr)(struct net_device *, struct ethtool_perm_addr *, u8 *);
        int     (*begin)(struct net_device *);
        void    (*complete)(struct net_device *);
        u32     (*get_ufo)(struct net_device *);
        int     (*set_ufo)(struct net_device *, u32);
+       u32     (*get_flags)(struct net_device *);
+       int     (*set_flags)(struct net_device *, u32);
+       u32     (*get_priv_flags)(struct net_device *);
+       int     (*set_priv_flags)(struct net_device *, u32);
+       int     (*get_sset_count)(struct net_device *, int);
+       int     (*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
+       int     (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
+       int     (*flash_device)(struct net_device *, struct ethtool_flash *);
+       int     (*reset)(struct net_device *, u32 *);
 };
 #endif /* __KERNEL__ */
 
@@ -411,6 +539,25 @@ struct ethtool_ops {
 #define ETHTOOL_GPERMADDR      0x00000020 /* Get permanent hardware address */
 #define ETHTOOL_GUFO           0x00000021 /* Get UFO enable (ethtool_value) */
 #define ETHTOOL_SUFO           0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO           0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO           0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS         0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS         0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS                0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS                0x00000028 /* Set driver-private flags bitmap */
+
+#define        ETHTOOL_GRXFH           0x00000029 /* Get RX flow hash configuration */
+#define        ETHTOOL_SRXFH           0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO           0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO           0x0000002c /* Set GRO enable (ethtool_value) */
+#define        ETHTOOL_GRXRINGS        0x0000002d /* Get RX rings available for LB */
+#define        ETHTOOL_GRXCLSRLCNT     0x0000002e /* Get RX class rule count */
+#define        ETHTOOL_GRXCLSRULE      0x0000002f /* Get RX classification rule */
+#define        ETHTOOL_GRXCLSRLALL     0x00000030 /* Get all RX classification rule */
+#define        ETHTOOL_SRXCLSRLDEL     0x00000031 /* Delete RX classification rule */
+#define        ETHTOOL_SRXCLSRLINS     0x00000032 /* Insert RX classification rule */
+#define        ETHTOOL_FLASHDEV        0x00000033 /* Flash firmware to device */
+#define        ETHTOOL_RESET           0x00000034 /* Reset hardware */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET         ETHTOOL_GSET
@@ -432,6 +579,12 @@ struct ethtool_ops {
 #define SUPPORTED_10000baseT_Full      (1 << 12)
 #define SUPPORTED_Pause                        (1 << 13)
 #define SUPPORTED_Asym_Pause           (1 << 14)
+#define SUPPORTED_2500baseX_Full       (1 << 15)
+#define SUPPORTED_Backplane            (1 << 16)
+#define SUPPORTED_1000baseKX_Full      (1 << 17)
+#define SUPPORTED_10000baseKX4_Full    (1 << 18)
+#define SUPPORTED_10000baseKR_Full     (1 << 19)
+#define SUPPORTED_10000baseR_FEC       (1 << 20)
 
 /* Indicates what features are advertised by the interface. */
 #define ADVERTISED_10baseT_Half                (1 << 0)
@@ -449,6 +602,12 @@ struct ethtool_ops {
 #define ADVERTISED_10000baseT_Full     (1 << 12)
 #define ADVERTISED_Pause               (1 << 13)
 #define ADVERTISED_Asym_Pause          (1 << 14)
+#define ADVERTISED_2500baseX_Full      (1 << 15)
+#define ADVERTISED_Backplane           (1 << 16)
+#define ADVERTISED_1000baseKX_Full     (1 << 17)
+#define ADVERTISED_10000baseKX4_Full   (1 << 18)
+#define ADVERTISED_10000baseKR_Full    (1 << 19)
+#define ADVERTISED_10000baseR_FEC      (1 << 20)
 
 /* The following are all involved in forcing a particular link
  * mode for the device for setting things.  When getting the
@@ -473,6 +632,9 @@ struct ethtool_ops {
 #define PORT_MII               0x02
 #define PORT_FIBRE             0x03
 #define PORT_BNC               0x04
+#define PORT_DA                        0x05
+#define PORT_NONE              0xef
+#define PORT_OTHER             0xff
 
 /* Which transceiver to use. */
 #define XCVR_INTERNAL          0x00
@@ -487,6 +649,11 @@ struct ethtool_ops {
 #define AUTONEG_DISABLE                0x00
 #define AUTONEG_ENABLE         0x01
 
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID     0x00
+#define ETH_TP_MDI             0x01
+#define ETH_TP_MDI_X           0x02
+
 /* Wake-On-Lan options. */
 #define WAKE_PHY               (1 << 0)
 #define WAKE_UCAST             (1 << 1)
@@ -496,4 +663,63 @@ struct ethtool_ops {
 #define WAKE_MAGIC             (1 << 5)
 #define WAKE_MAGICSECURE       (1 << 6) /* only meaningful if WAKE_MAGIC */
 
+/* L3-L4 network traffic flow types */
+#define        TCP_V4_FLOW     0x01
+#define        UDP_V4_FLOW     0x02
+#define        SCTP_V4_FLOW    0x03
+#define        AH_ESP_V4_FLOW  0x04
+#define        TCP_V6_FLOW     0x05
+#define        UDP_V6_FLOW     0x06
+#define        SCTP_V6_FLOW    0x07
+#define        AH_ESP_V6_FLOW  0x08
+#define        AH_V4_FLOW      0x09
+#define        ESP_V4_FLOW     0x0a
+#define        AH_V6_FLOW      0x0b
+#define        ESP_V6_FLOW     0x0c
+#define        IP_USER_FLOW    0x0d
+#define IPV4_FLOW       0x10
+#define IPV6_FLOW       0x11
+
+/* L3-L4 network traffic flow hash options */
+#define        RXH_L2DA        (1 << 1)
+#define        RXH_VLAN        (1 << 2)
+#define        RXH_L3_PROTO    (1 << 3)
+#define        RXH_IP_SRC      (1 << 4)
+#define        RXH_IP_DST      (1 << 5)
+#define        RXH_L4_B_0_1    (1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define        RXH_L4_B_2_3    (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define        RXH_DISCARD     (1 << 31)
+
+#define        RX_CLS_FLOW_DISC        0xffffffffffffffffULL
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+       /* These flags represent components dedicated to the interface
+        * the command is addressed to.  Shift any flag left by
+        * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+        * same type.
+        */
+       ETH_RESET_MGMT          = 1 << 0,       /* Management processor */
+       ETH_RESET_IRQ           = 1 << 1,       /* Interrupt requester */
+       ETH_RESET_DMA           = 1 << 2,       /* DMA engine */
+       ETH_RESET_FILTER        = 1 << 3,       /* Filtering/flow direction */
+       ETH_RESET_OFFLOAD       = 1 << 4,       /* Protocol offload */
+       ETH_RESET_MAC           = 1 << 5,       /* Media access controller */
+       ETH_RESET_PHY           = 1 << 6,       /* Transceiver/PHY */
+       ETH_RESET_RAM           = 1 << 7,       /* RAM shared between
+                                                * multiple components */
+
+       ETH_RESET_DEDICATED     = 0x0000ffff,   /* All components dedicated to
+                                                * this interface */
+       ETH_RESET_ALL           = 0xffffffff,   /* All components used by this
+                                                * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
 #endif /* _LINUX_ETHTOOL_H */