-#ifndef _SPARC64_TSB_H
-#define _SPARC64_TSB_H
-
-/* The sparc64 TSB is similar to the powerpc hashtables. It's a
- * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes
- * pointers into this table for 8K and 64K page sizes, and also a
- * comparison TAG based upon the virtual address and context which
- * faults.
- *
- * TLB miss trap handler software does the actual lookup via something
- * of the form:
- *
- * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
- * ldxa [%g0] ASI_{D,I}MMU, %g6
- * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4
- * cmp %g4, %g6
- * bne,pn %xcc, tsb_miss_{d,i}tlb
- * mov FAULT_CODE_{D,I}TLB, %g3
- * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN
- * retry
- *
- *
- * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
- * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu
- * register which is:
- *
- * -------------------------------------------------
- * | - | CONTEXT | - | VADDR bits 63:22 |
- * -------------------------------------------------
- * 63 61 60 48 47 42 41 0
- *
- * Like the powerpc hashtables we need to use locking in order to
- * synchronize while we update the entries. PTE updates need locking
- * as well.
- *
- * We need to carefully choose a lock bits for the TSB entry. We
- * choose to use bit 47 in the tag. Also, since we never map anything
- * at page zero in context zero, we use zero as an invalid tag entry.
- * When the lock bit is set, this forces a tag comparison failure.
- */
-
-#define TSB_TAG_LOCK_BIT 47
-#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32))
-
-#define TSB_MEMBAR membar #StoreStore
-
-#define TSB_LOCK_TAG(TSB, REG1, REG2) \
-99: lduwa [TSB] ASI_N, REG1; \
- sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\
- andcc REG1, REG2, %g0; \
- bne,pn %icc, 99b; \
- nop; \
- casa [TSB] ASI_N, REG1, REG2;\
- cmp REG1, REG2; \
- bne,pn %icc, 99b; \
- nop; \
- TSB_MEMBAR
-
-#define TSB_WRITE(TSB, TTE, TAG) \
- stx TTE, [TSB + 0x08]; \
- TSB_MEMBAR; \
- stx TAG, [TSB + 0x00];
-
- /* Do a kernel page table walk. Leaves physical PTE pointer in
- * REG1. Jumps to FAIL_LABEL on early page table walk termination.
- * VADDR will not be clobbered, but REG2 will.
- */
-#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \
- sethi %hi(swapper_pg_dir), REG1; \
- or REG1, %lo(swapper_pg_dir), REG1; \
- sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- andn REG2, 0x3, REG2; \
- lduw [REG1 + REG2], REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x3, REG2; \
- lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - PMD_SHIFT, REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x7, REG2; \
- add REG1, REG2, REG1;
-
- /* Do a user page table walk in MMU globals. Leaves physical PTE
- * pointer in REG1. Jumps to FAIL_LABEL on early page table walk
- * termination. Physical base of page tables is in PHYS_PGD which
- * will not be modified.
- *
- * VADDR will not be clobbered, but REG1 and REG2 will.
- */
-#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \
- sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- andn REG2, 0x3, REG2; \
- lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x3, REG2; \
- lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
- brz,pn REG1, FAIL_LABEL; \
- sllx VADDR, 64 - PMD_SHIFT, REG2; \
- srlx REG2, 64 - PAGE_SHIFT, REG2; \
- sllx REG1, 11, REG1; \
- andn REG2, 0x7, REG2; \
- add REG1, REG2, REG1;
-
-/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
- * If no entry is found, FAIL_LABEL will be branched to. On success
- * the resulting PTE value will be left in REG1. VADDR is preserved
- * by this routine.
- */
-#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
- sethi %hi(prom_trans), REG1; \
- or REG1, %lo(prom_trans), REG1; \
-97: ldx [REG1 + 0x00], REG2; \
- brz,pn REG2, FAIL_LABEL; \
- nop; \
- ldx [REG1 + 0x08], REG3; \
- add REG2, REG3, REG3; \
- cmp REG2, VADDR; \
- bgu,pt %xcc, 98f; \
- cmp VADDR, REG3; \
- bgeu,pt %xcc, 98f; \
- ldx [REG1 + 0x10], REG3; \
- sub VADDR, REG2, REG2; \
- ba,pt %xcc, 99f; \
- add REG3, REG2, REG1; \
-98: ba,pt %xcc, 97b; \
- add REG1, (3 * 8), REG1; \
-99:
-
- /* We use a 32K TSB for the whole kernel, this allows to
- * handle about 16MB of modules and vmalloc mappings without
- * incurring many hash conflicts.
- */
-#define KERNEL_TSB_SIZE_BYTES (32 * 1024)
-#define KERNEL_TSB_NENTRIES \
- (KERNEL_TSB_SIZE_BYTES / 16)
-
- /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
- * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries
- * and the found TTE will be left in REG1. REG3 and REG4 must
- * be an even/odd pair of registers.
- *
- * VADDR and TAG will be preserved and not clobbered by this macro.
- */
-#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
- sethi %hi(swapper_tsb), REG1; \
- or REG1, %lo(swapper_tsb), REG1; \
- srlx VADDR, PAGE_SHIFT, REG2; \
- and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
- sllx REG2, 4, REG2; \
- add REG1, REG2, REG2; \
- ldda [REG2] ASI_NUCLEUS_QUAD_LDD, REG3; \
- cmp REG3, TAG; \
- be,a,pt %xcc, OK_LABEL; \
- mov REG4, REG1;
-
-#endif /* !(_SPARC64_TSB_H) */
+#include <asm-sparc/tsb.h>
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff