*
* Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
*
- * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
+ * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
* 2004 Sylvain Meyer
*
* This driver consists of two parts. The first part (intelfbdrv.c) provides
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/ioport.h>
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I8xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
case PCI_DEVICE_ID_INTEL_85XGM:
tmp = 0;
dinfo->mobile = 1;
dinfo->mobile = 1;
dinfo->pll_index = PLLS_I9xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_945GME:
+ dinfo->name = "Intel(R) 945GME";
+ dinfo->chipset = INTEL_945GME;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_965G:
+ dinfo->name = "Intel(R) 965G";
+ dinfo->chipset = INTEL_965G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_965GM:
+ dinfo->name = "Intel(R) 965GM";
+ dinfo->chipset = INTEL_965GM;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
default:
return 1;
}
case PCI_DEVICE_ID_INTEL_915GM:
case PCI_DEVICE_ID_INTEL_945G:
case PCI_DEVICE_ID_INTEL_945GM:
- /* 915 and 945 chipsets support a 256MB aperture.
+ case PCI_DEVICE_ID_INTEL_945GME:
+ case PCI_DEVICE_ID_INTEL_965G:
+ case PCI_DEVICE_ID_INTEL_965GM:
+ /* 915, 945 and 965 chipsets support a 256MB aperture.
Aperture size is determined by inspected the
base address of the aperture. */
if (pci_resource_start(pdev, 2) & 0x08000000)
var->yres, VACTIVE_MASK + 1);
return 1;
}
+ if (var->xres < 4) {
+ WRN_MSG("X resolution too small (%d vs 4).\n", var->xres);
+ return 1;
+ }
+ if (var->yres < 4) {
+ WRN_MSG("Y resolution too small (%d vs 4).\n", var->yres);
+ return 1;
+ }
/* Check for doublescan modes. */
if (var->vmode & FB_VMODE_DOUBLE) {
return 1;
}
+ if ((var->vmode & FB_VMODE_INTERLACED) && (var->yres & 1)) {
+ WRN_MSG("Odd number of lines in interlaced mode\n");
+ return 1;
+ }
+
/* Check if clock is OK. */
tmp = 1000000000 / var->pixclock;
if (tmp < MIN_CLOCK) {
dinfo->vsync.pan_offset = offset;
if ((var->activate & FB_ACTIVATE_VBL) &&
- !intelfbhw_enable_irq(dinfo, 0))
+ !intelfbhw_enable_irq(dinfo))
dinfo->vsync.pan_display = 1;
else {
dinfo->vsync.pan_display = 0;
}
+/* Check which pipe is connected to an active display plane. */
+int intelfbhw_active_pipe(const struct intelfb_hwstate *hw)
+{
+ int pipe = -1;
+
+ /* keep old default behaviour - prefer PIPE_A */
+ if (hw->disp_b_ctrl & DISPPLANE_PLANE_ENABLE) {
+ pipe = (hw->disp_b_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
+ pipe &= PIPE_MASK;
+ if (unlikely(pipe == PIPE_A))
+ return PIPE_A;
+ }
+ if (hw->disp_a_ctrl & DISPPLANE_PLANE_ENABLE) {
+ pipe = (hw->disp_a_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
+ pipe &= PIPE_MASK;
+ if (likely(pipe == PIPE_A))
+ return PIPE_A;
+ }
+ /* Impossible that no pipe is selected - return PIPE_A */
+ WARN_ON(pipe == -1);
+ if (unlikely(pipe == -1))
+ pipe = PIPE_A;
+
+ return pipe;
+}
+
void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
unsigned red, unsigned green, unsigned blue,
unsigned transp)
struct intelfb_hwstate *hw,
struct fb_var_screeninfo *var)
{
- int pipe = PIPE_A;
+ int pipe = intelfbhw_active_pipe(hw);
u32 *dpll, *fp0, *fp1;
u32 m1, m2, n, p1, p2, clock_target, clock;
u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
/* Disable VGA */
hw->vgacntrl |= VGA_DISABLE;
- /* Check whether pipe A or pipe B is enabled. */
- if (hw->pipe_a_conf & PIPECONF_ENABLE)
- pipe = PIPE_A;
- else if (hw->pipe_b_conf & PIPECONF_ENABLE)
- pipe = PIPE_B;
-
/* Set which pipe's registers will be set. */
if (pipe == PIPE_B) {
dpll = &hw->dpll_b;
hblank_end);
vactive = var->yres;
+ if (var->vmode & FB_VMODE_INTERLACED)
+ vactive--; /* the chip adds 2 halflines automatically */
vsync_start = vactive + var->lower_margin;
vsync_end = vsync_start + var->vsync_len;
vtotal = vsync_end + var->upper_margin;
int intelfbhw_program_mode(struct intelfb_info *dinfo,
const struct intelfb_hwstate *hw, int blank)
{
- int pipe = PIPE_A;
u32 tmp;
const u32 *dpll, *fp0, *fp1, *pipe_conf;
const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
- u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg;
+ u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg, pipe_stat_reg;
u32 hsync_reg, htotal_reg, hblank_reg;
u32 vsync_reg, vtotal_reg, vblank_reg;
u32 src_size_reg;
u32 count, tmp_val[3];
- /* Assume single pipe, display plane A, analog CRT. */
+ /* Assume single pipe */
#if VERBOSE > 0
DBG_MSG("intelfbhw_program_mode\n");
tmp |= VGA_DISABLE;
OUTREG(VGACNTRL, tmp);
- /* Check whether pipe A or pipe B is enabled. */
- if (hw->pipe_a_conf & PIPECONF_ENABLE)
- pipe = PIPE_A;
- else if (hw->pipe_b_conf & PIPECONF_ENABLE)
- pipe = PIPE_B;
-
- dinfo->pipe = pipe;
+ dinfo->pipe = intelfbhw_active_pipe(hw);
- if (pipe == PIPE_B) {
+ if (dinfo->pipe == PIPE_B) {
dpll = &hw->dpll_b;
fp0 = &hw->fpb0;
fp1 = &hw->fpb1;
fp0_reg = FPB0;
fp1_reg = FPB1;
pipe_conf_reg = PIPEBCONF;
+ pipe_stat_reg = PIPEBSTAT;
hsync_reg = HSYNC_B;
htotal_reg = HTOTAL_B;
hblank_reg = HBLANK_B;
fp0_reg = FPA0;
fp1_reg = FPA1;
pipe_conf_reg = PIPEACONF;
+ pipe_stat_reg = PIPEASTAT;
hsync_reg = HSYNC_A;
htotal_reg = HTOTAL_A;
hblank_reg = HBLANK_A;
OUTREG(vtotal_reg, *vt);
OUTREG(src_size_reg, *ss);
+ switch (dinfo->info->var.vmode & (FB_VMODE_INTERLACED |
+ FB_VMODE_ODD_FLD_FIRST)) {
+ case FB_VMODE_INTERLACED | FB_VMODE_ODD_FLD_FIRST:
+ OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_ODD_EN);
+ break;
+ case FB_VMODE_INTERLACED: /* even lines first */
+ OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_EVEN_EN);
+ break;
+ default: /* non-interlaced */
+ OUTREG(pipe_stat_reg, 0xFFFF); /* clear all status bits only */
+ }
/* Enable pipe */
OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
}
}
-static irqreturn_t
-intelfbhw_irq(int irq, void *dev_id) {
- int handled = 0;
+static irqreturn_t intelfbhw_irq(int irq, void *dev_id)
+{
u16 tmp;
- struct intelfb_info *dinfo = (struct intelfb_info *)dev_id;
+ struct intelfb_info *dinfo = dev_id;
spin_lock(&dinfo->int_lock);
tmp = INREG16(IIR);
- tmp &= VSYNC_PIPE_A_INTERRUPT;
+ if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
+ tmp &= PIPE_A_EVENT_INTERRUPT;
+ else
+ tmp &= VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
if (tmp == 0) {
spin_unlock(&dinfo->int_lock);
- return IRQ_RETVAL(handled);
+ return IRQ_RETVAL(0); /* not us */
}
- OUTREG16(IIR, tmp);
+ /* clear status bits 0-15 ASAP and don't touch bits 16-31 */
+ OUTREG(PIPEASTAT, INREG(PIPEASTAT));
- if (tmp & VSYNC_PIPE_A_INTERRUPT) {
- dinfo->vsync.count++;
- if (dinfo->vsync.pan_display) {
- dinfo->vsync.pan_display = 0;
- OUTREG(DSPABASE, dinfo->vsync.pan_offset);
- }
- wake_up_interruptible(&dinfo->vsync.wait);
- handled = 1;
+ OUTREG16(IIR, tmp);
+ if (dinfo->vsync.pan_display) {
+ dinfo->vsync.pan_display = 0;
+ OUTREG(DSPABASE, dinfo->vsync.pan_offset);
}
+ dinfo->vsync.count++;
+ wake_up_interruptible(&dinfo->vsync.wait);
+
spin_unlock(&dinfo->int_lock);
- return IRQ_RETVAL(handled);
+ return IRQ_RETVAL(1);
}
-int
-intelfbhw_enable_irq(struct intelfb_info *dinfo, int reenable) {
-
+int intelfbhw_enable_irq(struct intelfb_info *dinfo)
+{
+ u16 tmp;
if (!test_and_set_bit(0, &dinfo->irq_flags)) {
if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
- "intelfb", dinfo)) {
+ "intelfb", dinfo)) {
clear_bit(0, &dinfo->irq_flags);
return -EINVAL;
}
spin_lock_irq(&dinfo->int_lock);
- OUTREG16(HWSTAM, 0xfffe);
- OUTREG16(IMR, 0x0);
- OUTREG16(IER, VSYNC_PIPE_A_INTERRUPT);
- spin_unlock_irq(&dinfo->int_lock);
- } else if (reenable) {
- u16 ier;
-
+ OUTREG16(HWSTAM, 0xfffe); /* i830 DRM uses ffff */
+ OUTREG16(IMR, 0);
+ } else
spin_lock_irq(&dinfo->int_lock);
- ier = INREG16(IER);
- if ((ier & VSYNC_PIPE_A_INTERRUPT)) {
- DBG_MSG("someone disabled the IRQ [%08X]\n", ier);
- OUTREG(IER, VSYNC_PIPE_A_INTERRUPT);
- }
- spin_unlock_irq(&dinfo->int_lock);
+
+ if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
+ tmp = PIPE_A_EVENT_INTERRUPT;
+ else
+ tmp = VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
+ if (tmp != INREG16(IER)) {
+ DBG_MSG("changing IER to 0x%X\n", tmp);
+ OUTREG16(IER, tmp);
}
+
+ spin_unlock_irq(&dinfo->int_lock);
return 0;
}
-void
-intelfbhw_disable_irq(struct intelfb_info *dinfo) {
-
+void intelfbhw_disable_irq(struct intelfb_info *dinfo)
+{
if (test_and_clear_bit(0, &dinfo->irq_flags)) {
if (dinfo->vsync.pan_display) {
dinfo->vsync.pan_display = 0;
return -ENODEV;
}
- ret = intelfbhw_enable_irq(dinfo, 0);
+ ret = intelfbhw_enable_irq(dinfo);
if (ret)
return ret;
if (ret < 0)
return ret;
if (ret == 0) {
- intelfbhw_enable_irq(dinfo, 1);
DBG_MSG("wait_for_vsync timed out!\n");
return -ETIMEDOUT;
}