* The Hardware parameters for each card
*/
-struct aty_cmap_regs {
- u8 windex;
- u8 lut;
- u8 mask;
- u8 rindex;
- u8 cntl;
-};
-
struct pci_mmap_map {
unsigned long voff;
unsigned long poff;
* Internal routines
*/
-static int aty_init(struct fb_info *info, const char *name);
+static int aty_init(struct fb_info *info);
+static void aty_resume_chip(struct fb_info *info);
#ifdef CONFIG_ATARI
static int store_video_par(char *videopar, unsigned char m64_num);
#endif
else
info->var.accel_flags = 0;
-#if 0 /* fbmon is not done. uncomment for 2.5.x -brad */
- if (!fbmon_valid_timings(pixclock, htotal, vtotal, info))
- return -EINVAL;
-#endif
aty_crtc_to_var(&crtc, var);
var->pixclock = par->pll_ops->pll_to_var(info, &pll);
return 0;
aty_st_8(DAC_CNTL, tmp, par);
aty_st_8(DAC_MASK, 0xff, par);
- writeb(i, &par->aty_cmap_regs->rindex);
- atyfb_save.r[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.g[enter][i] = readb(&par->aty_cmap_regs->lut);
- atyfb_save.b[enter][i] = readb(&par->aty_cmap_regs->lut);
- writeb(i, &par->aty_cmap_regs->windex);
- writeb(atyfb_save.r[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.g[1 - enter][i],
- &par->aty_cmap_regs->lut);
- writeb(atyfb_save.b[1 - enter][i],
- &par->aty_cmap_regs->lut);
+ aty_st_8(DAC_R_INDEX, i, par);
+ atyfb_save.r[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.g[enter][i] = aty_ld_8(DAC_DATA, par);
+ atyfb_save.b[enter][i] = aty_ld_8(DAC_DATA, par);
+ aty_st_8(DAC_W_INDEX, i, par);
+ aty_st_8(DAC_DATA, atyfb_save.r[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.g[1 - enter][i], par);
+ aty_st_8(DAC_DATA, atyfb_save.b[1 - enter][i], par);
}
}
#if defined(CONFIG_PM) && defined(CONFIG_PCI)
+#ifdef CONFIG_PPC_PMAC
/* Power management routines. Those are used for PowerBook sleep.
*/
static int aty_power_mgmt(int sleep, struct atyfb_par *par)
return timeout ? 0 : -EIO;
}
+#endif
static int atyfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct atyfb_par *par = (struct atyfb_par *) info->par;
-#ifndef CONFIG_PPC_PMAC
- /* HACK ALERT ! Once I find a proper way to say to each driver
- * individually what will happen with it's PCI slot, I'll change
- * that. On laptops, the AGP slot is just unclocked, so D2 is
- * expected, while on desktops, the card is powered off
- */
- return 0;
-#endif /* CONFIG_PPC_PMAC */
-
if (state.event == pdev->dev.power.power_state.event)
return 0;
par->asleep = 1;
par->lock_blank = 1;
+#ifdef CONFIG_PPC_PMAC
/* Set chip to "suspend" mode */
if (aty_power_mgmt(1, par)) {
par->asleep = 0;
release_console_sem();
return -EIO;
}
+#else
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+#endif
release_console_sem();
acquire_console_sem();
+#ifdef CONFIG_PPC_PMAC
if (pdev->dev.power.power_state.event == 2)
aty_power_mgmt(0, par);
+#else
+ pci_set_power_state(pdev, PCI_D0);
+#endif
+
+ aty_resume_chip(info);
+
par->asleep = 0;
/* Restore display */
snprintf(name, sizeof(name), "atybl%d", info->node);
- bd = backlight_device_register(name, par, &aty_bl_data);
+ bd = backlight_device_register(name, info->dev, par, &aty_bl_data);
if (IS_ERR(bd)) {
info->bl_dev = NULL;
printk(KERN_WARNING "aty: Backlight registration failed\n");
}
#endif /* defined(__i386__) && defined(CONFIG_FB_ATY_GENERIC_LCD) */
-static int __devinit aty_init(struct fb_info *info, const char *name)
+static int __devinit aty_init(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
const char *ramname = NULL, *xtal;
int gtb_memsize, has_var = 0;
struct fb_var_screeninfo var;
- u32 i;
init_waitqueue_head(&par->vblank.wait);
spin_lock_init(&par->int_lock);
- par->aty_cmap_regs =
- (struct aty_cmap_regs __iomem *) (par->ati_regbase + 0xc0);
-
#ifdef CONFIG_PPC_PMAC
/* The Apple iBook1 uses non-standard memory frequencies. We detect it
* and set the frequency manually. */
if(par->pll_ops->get_pll)
par->pll_ops->get_pll(info, &saved_pll);
- i = aty_ld_le32(MEM_CNTL, par);
+ par->mem_cntl = aty_ld_le32(MEM_CNTL, par);
gtb_memsize = M64_HAS(GTB_DSP);
if (gtb_memsize)
- switch (i & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
+ switch (par->mem_cntl & 0xF) { /* 0xF used instead of MEM_SIZE_ALIAS */
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
default:
info->fix.smem_len = 0x80000;
} else
- switch (i & MEM_SIZE_ALIAS) {
+ switch (par->mem_cntl & MEM_SIZE_ALIAS) {
case MEM_SIZE_512K:
info->fix.smem_len = 0x80000;
break;
if (vram) {
info->fix.smem_len = vram * 1024;
- i = i & ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
+ par->mem_cntl &= ~(gtb_memsize ? 0xF : MEM_SIZE_ALIAS);
if (info->fix.smem_len <= 0x80000)
- i |= MEM_SIZE_512K;
+ par->mem_cntl |= MEM_SIZE_512K;
else if (info->fix.smem_len <= 0x100000)
- i |= MEM_SIZE_1M;
+ par->mem_cntl |= MEM_SIZE_1M;
else if (info->fix.smem_len <= 0x200000)
- i |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_2M_GTB : MEM_SIZE_2M;
else if (info->fix.smem_len <= 0x400000)
- i |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_4M_GTB : MEM_SIZE_4M;
else if (info->fix.smem_len <= 0x600000)
- i |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_6M_GTB : MEM_SIZE_6M;
else
- i |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
- aty_st_le32(MEM_CNTL, i, par);
+ par->mem_cntl |= gtb_memsize ? MEM_SIZE_8M_GTB : MEM_SIZE_8M;
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
}
/*
#endif
if(par->pll_ops->init_pll)
par->pll_ops->init_pll(info, &par->pll);
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
/*
* Last page of 8 MB (4 MB on ISA) aperture is MMIO,
fb_list = info;
PRINTKI("fb%d: %s frame buffer device on %s\n",
- info->node, info->fix.id, name);
+ info->node, info->fix.id, par->bus_type == ISA ? "ISA" : "PCI");
return 0;
aty_init_exit:
return -1;
}
+static void aty_resume_chip(struct fb_info *info)
+{
+ struct atyfb_par *par = info->par;
+
+ aty_st_le32(MEM_CNTL, par->mem_cntl, par);
+
+ if (par->pll_ops->resume_pll)
+ par->pll_ops->resume_pll(info, &par->pll);
+
+ if (par->aux_start)
+ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) | BUS_APER_REG_DIS, par);
+}
+
#ifdef CONFIG_ATARI
static int __devinit store_video_par(char *video_str, unsigned char m64_num)
{
#endif
gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
+ gen_cntl &= ~0x400004c;
switch (blank) {
- case FB_BLANK_UNBLANK:
- gen_cntl &= ~0x400004c;
+ case FB_BLANK_UNBLANK:
break;
case FB_BLANK_NORMAL:
gen_cntl |= 0x4000040;
static void aty_st_pal(u_int regno, u_int red, u_int green, u_int blue,
const struct atyfb_par *par)
{
-#ifdef CONFIG_ATARI
- out_8(&par->aty_cmap_regs->windex, regno);
- out_8(&par->aty_cmap_regs->lut, red);
- out_8(&par->aty_cmap_regs->lut, green);
- out_8(&par->aty_cmap_regs->lut, blue);
-#else
- writeb(regno, &par->aty_cmap_regs->windex);
- writeb(red, &par->aty_cmap_regs->lut);
- writeb(green, &par->aty_cmap_regs->lut);
- writeb(blue, &par->aty_cmap_regs->lut);
-#endif
+ aty_st_8(DAC_W_INDEX, regno, par);
+ aty_st_8(DAC_DATA, red, par);
+ aty_st_8(DAC_DATA, green, par);
+ aty_st_8(DAC_DATA, blue, par);
}
/*
static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
struct fb_info *info, unsigned long addr)
{
- extern int con_is_present(void);
-
struct atyfb_par *par = info->par;
struct pcidev_cookie *pcp;
char prop[128];
#ifdef __i386__
#ifdef CONFIG_FB_ATY_GENERIC_LCD
-static void aty_init_lcd(struct atyfb_par *par, u32 bios_base)
+static void __devinit aty_init_lcd(struct atyfb_par *par, u32 bios_base)
{
u32 driv_inf_tab, sig;
u16 lcd_ofs;
pci_set_drvdata(pdev, info);
/* Init chip & register framebuffer */
- if (aty_init(info, "PCI"))
+ if (aty_init(info))
goto err_release_io;
#ifdef __sparc__
#ifdef CONFIG_ATARI
-static int __devinit atyfb_atari_probe(void)
+static int __init atyfb_atari_probe(void)
{
struct atyfb_par *par;
struct fb_info *info;
int m64_num;
u32 clock_r;
+ int num_found = 0;
for (m64_num = 0; m64_num < mach64_count; m64_num++) {
if (!phys_vmembase[m64_num] || !phys_size[m64_num] ||
break;
}
- if (aty_init(info, "ISA bus")) {
- if (info->screen_base)
- iounmap(info->screen_base);
- if (par->ati_regbase)
- iounmap(par->ati_regbase);
+ /* Fake pci_id for correct_chipset() */
+ switch (aty_ld_le32(CONFIG_CHIP_ID, par) & CFG_CHIP_TYPE) {
+ case 0x00d7:
+ par->pci_id = PCI_CHIP_MACH64GX;
+ break;
+ case 0x0057:
+ par->pci_id = PCI_CHIP_MACH64CX;
+ break;
+ default:
+ break;
+ }
+
+ if (correct_chipset(par) || aty_init(info)) {
+ iounmap(info->screen_base);
+ iounmap(par->ati_regbase);
framebuffer_release(info);
- /* This is insufficient! kernel_map has added two large chunks!! */
- return -ENXIO;
+ } else {
+ num_found++;
}
}
+
+ return num_found ? 0 : -ENXIO;
}
#endif /* CONFIG_ATARI */
#endif /* CONFIG_PCI */
#ifndef MODULE
-static int __devinit atyfb_setup(char *options)
+static int __init atyfb_setup(char *options)
{
char *this_opt;
}
#endif /* MODULE */
-static int __devinit atyfb_init(void)
+static int __init atyfb_init(void)
{
int err1 = 1, err2 = 1;
#ifndef MODULE