#
menu "Graphics support"
+ depends on HAS_IOMEM
-config FIRMWARE_EDID
- bool "Enable firmware EDID"
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
+source "drivers/char/agp/Kconfig"
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+source "drivers/char/drm/Kconfig"
+
+config VGASTATE
+ tristate
+ default n
+
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ help
+ This framework adds support for low-level control of the video
+ output switch.
-config FB
+menuconfig FB
tristate "Support for frame buffer devices"
---help---
The frame buffer device provides an abstraction for the graphics
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB_DDC
tristate
- depends on FB && I2C && I2C_ALGOBIT
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
default n
config FB_CFB_FILLRECT
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_FOPS
+ tristate
+ depends on FB
+ default n
+
+config FB_DEFERRED_IO
+ bool
+ depends on FB
+ default y
+
+config FB_SVGALIB
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Common utility functions useful to fbdev drivers of VGA-based
+ cards.
+
config FB_MACMODES
tristate
depends on FB
This is particularly important to one driver, matroxfb. If
unsure, say N.
+comment "Frame buffer hardware drivers"
+ depends on FB
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
choice
and CD32. If you intend to run Linux on any of these systems, say Y;
otherwise say N.
-config FB_CYBER
- tristate "Amiga CyberVision 64 support"
- depends on FB && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64 graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64 or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the
- Cybervision 64/3D card, as they use incompatible video chips.
-
-config FB_VIRGE
- bool "Amiga CyberVision 64/3D support "
- depends on (FB = y) && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64/3D graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64/3D or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the older
- Cybervision 64 card, as they use incompatible video chips.
-
-config FB_RETINAZ3
- tristate "Amiga Retina Z3 support"
- depends on (FB = y) && ZORRO && BROKEN
- help
- This enables support for the Retina Z3 graphics card. Say N unless
- you have a Retina Z3 or plan to get one before you next recompile
- the kernel.
-
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on (FB = y) && ZORRO
config FB_ARC
tristate "Arc Monochrome LCD board support"
depends on FB && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
config FB_ATARI
bool "Atari native chipset support"
- depends on (FB = y) && ATARI && BROKEN
+ depends on (FB = y) && ATARI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the builtin graphics
chipset found in Ataris.
config FB_OF
bool "Open Firmware frame buffer device support"
- depends on (FB = y) && (PPC64 || PPC_OF)
+ depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
To compile this driver as a module, choose M here: the
module will be called vga16fb.
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
default y
config FB_TGA
- tristate "TGA framebuffer support"
- depends on FB && ALPHA
+ tristate "TGA/SFB+ framebuffer support"
+ depends on FB && (ALPHA || TC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ ---help---
+ This is the frame buffer device driver for generic TGA and SFB+
+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+ also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+ TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+ Due to hardware limitations ZLX-E2 and E3 cards are not supported
+ for DECstation 5000/200 systems. Additionally due to firmware
+ limitations these cards may cause troubles with booting DECstation
+ 5000/240 and /260 systems, but are fully supported under Linux if
+ you manage to get it going. ;-)
+
+ Say Y if you have one of those.
+
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
help
- This is the frame buffer device driver for generic TGA graphic
- cards. Say Y if you have one of those.
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
config FB_VESA
bool "VESA VGA graphics support"
help
This is the frame buffer device driver for the Intel-based Macintosh
+config FB_HECUBA
+ tristate "Hecuba board support"
+ depends on FB && X86 && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ help
+ This enables support for the Hecuba board. This driver was tested
+ with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+ interface (8 bit data, 4 bit control). If you anticipate using
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
config FB_HGA
tristate "Hercules mono graphics support"
depends on FB && X86
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config FB_SUN3
- bool "Sun3 framebuffer support"
- depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
-
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on (FB = y) && SPARC
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ depends on (FB = y) && ARCH_CEIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+ bool "Frame Buffer in internal SRAM"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
+ help
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_NVIDIA_I2C
- select I2C if FB_NVIDIA_I2C
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
config FB_NVIDIA_I2C
bool "Enable DDC Support"
depends on FB_NVIDIA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_NVIDIA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_NVIDIA
default y
help
Say Y here if you want to control the backlight of your display.
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RIVA_I2C
- select I2C if FB_RIVA_I2C
- select FB_DDC if FB_RIVA_I2C
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
config FB_RIVA_I2C
bool "Enable DDC Support"
depends on FB_RIVA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
here.
config FB_RIVA_DEBUG
- bool "Lots of debug output from Riva(nVidia) driver"
+ bool "Lots of debug output"
depends on FB_RIVA
default n
help
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RIVA && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RIVA
default y
help
Say Y here if you want to control the backlight of your display.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
- select I2C
- select I2C_ALGOBIT
select FB_DDC
help
+config FB_LE80578
+ tristate "Intel LE80578 (Vermilion) support"
+ depends on FB && PCI && X86
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+ tristate "Intel Carillo Ranch support"
+ depends on FB_LE80578 && FB && PCI && X86
+ help
+ This driver supports the LE80578 (Carillo Ranch) board
+
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
- select I2C_ALGOBIT if FB_INTEL_I2C
- select I2C if FB_INTEL_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_INTEL_I2C
bool "DDC/I2C for Intel framebuffer support"
depends on FB_INTEL
+ select FB_DDC
default y
help
Say Y here if you want DDC/I2C support for your on-board Intel graphics.
config FB_MATROX_I2C
tristate "Matrox I2C support"
- depends on FB_MATROX && I2C
- select I2C_ALGOBIT
+ depends on FB_MATROX
+ select FB_DDC
---help---
This drivers creates I2C buses which are needed for accessing the
DDC (I2C) bus present on all Matroxes, an I2C bus which
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RADEON_I2C
- select I2C if FB_RADEON_I2C
- select FB_DDC if FB_RADEON_I2C
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
+ select FB_DDC
default y
help
Say Y here if you want DDC/I2C support for your Radeon board.
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RADEON && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_RADEON
default y
help
Say Y here if you want to control the backlight of your display.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY128 && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY128
default y
help
Say Y here if you want to control the backlight of your display.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY && PMAC_BACKLIGHT
- select FB_BACKLIGHT
+ depends on FB_ATY
default y
help
Say Y here if you want to control the backlight of your display.
-config FB_S3TRIO
- bool "S3 Trio display support"
- depends on (FB = y) && PPC && BROKEN
- help
- If you have a S3 Trio say Y. Say N for S3 Virge.
+config FB_S3
+ tristate "S3 Trio/Virge support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
- select I2C_ALGOBIT if FB_SAVAGE_I2C
- select I2C if FB_SAVAGE_I2C
- select FB_DDC if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
config FB_SAVAGE_I2C
bool "Enable DDC2 Support"
depends on FB_SAVAGE
+ select FB_DDC
help
This enables I2C support for S3 Savage Chipsets. This is used
only for getting EDID information from the attached display
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
Please read the <file:Documentation/fb/README-sstfb.txt> for supported
options and other important info support.
+config FB_VT8623
+ tristate "VIA VT8623 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for CastleRock integrated graphics core in the
+ VIA VT8623 [Apollo CLE266] chipset.
+
config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
This will compile the Trident frame buffer device with
acceleration functions.
+config FB_ARK
+ tristate "ARK 2000PV support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for PCI graphics boards with ARK 2000PV chip
+ and ICS 5342 RAMDAC.
+
config FB_PM3
- tristate "Permedia3 support"
- depends on FB && PCI && BROKEN
+ tristate "Permedia3 support (EXPERIMENTAL)"
+ depends on FB && PCI && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
config FB_AU1100
bool "Au1100 LCD Driver"
- depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+ depends on (FB = y) && MIPS && SOC_AU1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
config FB_AU1200
bool "Au1200 LCD Driver"
- depends on FB && MIPS && SOC_AU1200
+ depends on (FB = y) && MIPS && SOC_AU1200
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
source "drivers/video/geode/Kconfig"
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
config FB_PMAGB_B
tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on TC
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
-config FB_TX3912
- bool "TMPTX3912/PR31700 frame buffer support"
- depends on (FB = y) && NINO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-
- Say Y here to enable kernel support for the on-board framebuffer.
-
config FB_G364
bool "G364 frame buffer support"
depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
config FB_68328
bool "Motorola 68328 native frame buffer support"
- depends on FB && (M68328 || M68EZ328 || M68VZ328)
+ depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config FB_SM501
+ tristate "Silicon Motion SM501 framebuffer support"
+ depends on FB && MFD_SM501
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the CRT and LCD controllers in the Silicon
+ Motion SM501.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called sm501fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+
config FB_PNX4008_DUM
tristate "Display Update Module support on Philips PNX4008 board"
depends on FB && ARCH_PNX4008
config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4500P adaptor"
- depends on PPC
+ depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
Say Y here to enable support for the IBM GXT4500P display
adaptor, found on some IBM System P (pSeries) machines.
-config FB_VIRTUAL
- tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
- depends on FB
+config FB_PS3
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+ ---help---
+ Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+ int "PS3 default frame buffer size (in MiB)"
+ depends on FB_PS3
+ default 9
+ ---help---
+ This is the default size (in MiB) of the virtual frame buffer in
+ the PS3.
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && XILINX_VIRTEX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
+ Include support for the Xilinx ML300/ML403 reference design
+ framebuffer. ML300 carries a 640*480 LCD display on the board,
+ ML403 uses a standard DB15 VGA connector.
+
+config FB_VIRTUAL
+ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
board. This means you cannot see any output sent to this frame
the vfb_enable=1 option.
If unsure, say N.
+
+if ARCH_OMAP
+ source "drivers/video/omap/Kconfig"
+endif
+
+source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
source "drivers/video/logo/Kconfig"
endif
-if SYSFS
- source "drivers/video/backlight/Kconfig"
-endif
-
endmenu
-