menu "Graphics support"
source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
+config VGASTATE
+ tristate
+ default n
config FB
tristate "Support for frame buffer devices"
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_SYS_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_FOPS
+ tristate
+ depends on FB
+ default n
+
+config FB_DEFERRED_IO
+ bool
+ depends on FB
+ default y
+
config FB_SVGALIB
tristate
depends on FB
config FB_ARC
tristate "Arc Monochrome LCD board support"
depends on FB && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
default y
config FB_TGA
- tristate "TGA framebuffer support"
- depends on FB && ALPHA
+ tristate "TGA/SFB+ framebuffer support"
+ depends on FB && (ALPHA || TC)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
- help
- This is the frame buffer device driver for generic TGA graphic
- cards. Say Y if you have one of those.
+ ---help---
+ This is the frame buffer device driver for generic TGA and SFB+
+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+ also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+ TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+ Due to hardware limitations ZLX-E2 and E3 cards are not supported
+ for DECstation 5000/200 systems. Additionally due to firmware
+ limitations these cards may cause troubles with booting DECstation
+ 5000/240 and /260 systems, but are fully supported under Linux if
+ you manage to get it going. ;-)
+
+ Say Y if you have one of those.
config FB_VESA
bool "VESA VGA graphics support"
help
This is the frame buffer device driver for the Intel-based Macintosh
+config FB_HECUBA
+ tristate "Hecuba board support"
+ depends on FB && X86 && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_DEFERRED_IO
+ help
+ This enables support for the Hecuba board. This driver was tested
+ with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
+ interface (8 bit data, 4 bit control). If you anticpate using
+ this driver, say Y or M; otherwise say N. You must specify the
+ GPIO IO address to be used for setting control and data.
+
config FB_HGA
tristate "Hercules mono graphics support"
depends on FB && X86
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
select FB_CFB_IMAGEBLIT
select FB_TILEBLITTING
select FB_SVGALIB
+ select VGASTATE
---help---
Driver for graphics boards with S3 Trio / S3 Virge chip.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
mostly initialized the card already. It is treated as a
completely dumb framebuffer device.
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on FB && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firwmare has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PCI
bool "PCI framebuffers"
depends on (FB = y) && PCI && SPARC
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics