blitting. This is used by drivers that don't provide their own
(accelerated) version.
-config FB_SOFT_CURSOR
- tristate
- depends on FB
- default n
- ---help---
- Include the soft_cursor function for generic software cursor support.
- This is used by drivers that don't provide their own (accelerated)
- version.
-
config FB_MACMODES
tristate
depends on FB
default n
+config FB_FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default y
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This enables support for Cirrus Logic GD542x/543x based boards on
Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This framebuffer device driver is for the ARM PrimeCell PL110
Colour LCD controller. ARM PrimeCells provide the building
here and read <file:Documentation/modules.txt>. The module
will be called amba-clcd.
+choice
+
+ depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
+ prompt "LCD Panel"
+ default FB_ARMCLCD_SHARP_LQ035Q7DB02
+
+config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+ bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
+ help
+ This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
+ color QVGA, HRTFT panel. The LogicPD device includes an
+ an integrated HRTFT controller IC.
+ The native resolution is 240x320.
+
+config FB_ARMCLCD_SHARP_LQ057Q3DC02
+ bool "LogicPD LCD 5.7\" QVGA"
+ help
+ This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
+ color QVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 320x240.
+
+config FB_ARMCLCD_SHARP_LQ64D343
+ bool "LogicPD LCD 6.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ64D343, a 6.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+config FB_ARMCLCD_SHARP_LQ10D368
+ bool "LogicPD LCD 10.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ10D368, a 10.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+
+config FB_ARMCLCD_SHARP_LQ121S1DG41
+ bool "LogicPD LCD 12.1\" SVGA"
+ help
+ This is an implementation of the Sharp LQ121S1DG41, a 12.1"
+ color SVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 800x600.
+
+ This panel requires a clock rate may be an integer fraction
+ of the base LCDCLK frequency. The driver will select the
+ highest frequency available that is lower than the maximum
+ allowed. The panel may flicker if the clock rate is
+ slower than the recommended minimum.
+
+config FB_ARMCLCD_AUO_A070VW01_WIDE
+ bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
+ help
+ This is an implementation of the AU Optronics, a 7.0"
+ WIDE Color. The native resolution is 234x480.
+
+config FB_ARMCLCD_HITACHI
+ bool "Hitachi Wide Screen 800x480"
+ help
+ This is an implementation of the Hitachi 800x480.
+
+endchoice
+
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Acorn VIDC graphics
hardware found in Acorn RISC PCs and other ARM-based machines. If
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y to enable the Framebuffer driver for the CLPS7111 and
EP7212 processors.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is a framebuffer device for the SA-1100 LCD Controller.
See <http://www.linux-fbdev.org/> for information on framebuffer
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_CYBER2000
tristate "CyberPro 2000/2010/5000 support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Integraphics CyberPro 20x0 and 5000
VGA chips used in the Rebel.com Netwinder and other machines.
default y
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_Q40
bool
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
config FB_AMIGA
tristate "Amiga native chipset support"
depends on FB && AMIGA
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the builtin graphics
chipset found in Amigas.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64 graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Cybervision 64/3D graphics card from
Phase5. Please note that its use is not all that intuitive (i.e. if
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Amiga FrameMaster
card from BSC (exhibited 1992 but not shipped as a CBM product).
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
Say Y if you want support with Open Firmware for your graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the graphics adapter in the
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "platinum" graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
help
This driver supports a frame buffer for the "valkyrie" graphics
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Chips & Technologies
65550 graphics chip in PowerBooks.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
+ help
+ This is the frame buffer device driver for the Asiliant 69030 chipset
config FB_IMSTT
bool "IMS Twin Turbo display support"
depends on (FB = y) && PCI
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
The IMS Twin Turbo is a PCI-based frame buffer card bundled with
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES
# bool ' Apple DAFB display support' CONFIG_FB_DAFB
depends on (FB = y) && HP300
select FB_CFB_FILLRECT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
default y
config FB_TGA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a Hercules mono graphics card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
SGI Visual Workstation support for framebuffer graphics.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for SGI Graphics Backend.
This chip is used in SGI O2 and Visual Workstation 320/540.
config FB_GBE_MEM
int "Video memory size in MB"
depends on FB_GBE
- default 8
+ default 4
help
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config BUS_I2C
- bool
- depends on (FB = y) && VISWS
- default y
-
config FB_SUN3
bool "Sun3 framebuffer support"
depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
+config FB_SBUS
+ bool "SBUS and UPA framebuffers"
+ depends on (FB = y) && SPARC
+ help
+ Say Y if you want support for SBUS or UPA based frame buffer device.
+
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the BWtwo frame buffer.
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGthree frame buffer.
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a PowerVR 2 card in your box. If you plan to
run linux on your Dreamcast, you will have to say Y here.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Build in support for the SED1355 Epson Research Embedded RAMDAC
LCD/CRT Controller (since redesignated as the S1D13505) as a
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
-config FB_E1356
- tristate "Epson SED1356 framebuffer support"
- depends on FB && EXPERIMENTAL && PCI && MIPS
-
-config PB1000_CRT
- bool "Use CRT on Pb1000 (J65)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_NTSC
- bool "Use Compsite NTSC on Pb1000 (J63)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1000_TFT
- bool "Use TFT Panel on Pb1000 (J64)"
- depends on MIPS_PB1000=y && FB_E1356
-
-config PB1500_CRT
- bool "Use CRT on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_CRT
- prompt "Use CRT on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
-config PB1500_TFT
- bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
- depends on FB_E1356
-
-config PB1500_TFT
- prompt "Use TFT Panel on Pb1100 "
- depends on FB_E1356 && MIPS_PB1100=y
-
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
config FB_INTEL
tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
- depends on FB && EXPERIMENTAL && PCI && X86_32
+ depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports the on-board graphics built in to the Intel
830M/845G/852GM/855GM/865G chipsets.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_TILEBLITTING
select FB_MACMODES if PPC_PMAC
---help---
There is no need for enabling 'Matrox multihead support' if you have
only one Matrox card in the box.
-config FB_RADEON_OLD
- tristate "ATI Radeon display support (Old driver)"
- depends on FB && PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
- select FB_MACMODES if PPC
- help
- Choose this option if you want to use an ATI Radeon graphics card as
- a framebuffer device. There are both PCI and AGP versions. You
- don't need to choose this to run the Radeon in plain VGA mode.
- There is a product page at
- <http://www.ati.com/na/pages/products/pc/radeon32/index.html>.
-
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_OF
help
Choose this option if you want to use an ATI Radeon graphics card as
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
- depends on FB
+ depends on FB && !SPARC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
Rage XC, or Rage XL chipset.
-config FB_ATY_XL_INIT
- bool "Rage XL No-BIOS Init support"
- depends on FB_ATY_CT
- help
- Say Y here to support booting a Rage XL without BIOS support.
-
config FB_ATY_GX
bool "Mach64 GX support" if PCI
depends on FB_ATY
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
graphics board.
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
- select FB_SOFT_CURSOR
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or
Voodoo2 (cvg) based graphics card.
config FB_CYBLA
tristate "Cyberblade/i1 support"
- depends on FB && PCI
+ depends on FB && PCI && X86_32 && !64BIT
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
select VIDEO_SELECT
---help---
This driver is supposed to support the Trident Cyberblade/i1
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
bool "Au1100 LCD Driver"
depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
-source "drivers/video/geode/Kconfig"
-
-config FB_SBUS
- bool "SBUS and UPA framebuffers"
- depends on (FB = y) && (SPARC32 || SPARC64)
+config FB_AU1200
+ bool "Au1200 LCD Driver"
+ depends on FB && MIPS && SOC_AU1200
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
- Say Y if you want support for SBUS or UPA based frame buffer device.
+ This is the framebuffer driver for the AMD Au1200 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1200fb:panel=<name>.
+
+source "drivers/video/geode/Kconfig"
config FB_FFB
bool "Creator/Creator3D/Elite3D support"
depends on FB_SBUS && SPARC64
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Creator, Creator3D,
and Elite3D graphics boards.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the TCX 24/8bit frame
buffer.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the CGfourteen frame
buffer on Desktop SPARCsystems with the SX graphics option.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the P9100 card
supported on Sparcbook 3 machines.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the SBUS-based Sun ZX
(leo) frame buffer cards.
config FB_PCI
bool "PCI framebuffers"
- depends on (FB = y) && PCI && (SPARC64 || SPARC32)
+ depends on (FB = y) && PCI && SPARC
config FB_IGA
bool "IGA 168x display support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the framebuffer device for the INTERGRAPHICS 1680 and
successor frame buffer cards.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
This is the frame buffer device driver for the Hitachi HD64461 LCD
frame buffer card.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
used mainly in the MIPS-based DECstation series.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
used mainly in the MIPS-based DECstation series.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the PMAGB-B TURBOchannel framebuffer card used mainly
in the MIPS-based DECstation series. The card is currently only
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Support for the onboard framebuffer (1024x768x8) in the Personal
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
The G364 driver is the framebuffer used in MIPS Magnum 4000 and
Olivetti M700-10 systems.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
help
Say Y here if you want to support the built-in frame buffer of
the Motorola 68328 CPU family.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Intel
PXA2x0 processor.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
+ module will be called pxafb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
- module will be called vfb. If you want to compile it as a module,
+ module will be called w100fb. If you want to compile it as a module,
say M here and read <file:Documentation/modules.txt>.
If unsure, say N.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
Frame buffer driver for the built-in LCD controller in the Samsung
S3C2410 processor.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_SOFT_CURSOR
---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff