fbdev: intelfb: add support for the Intel Integrated Graphics Controller 965G/965GM

[safe/jmp/linux-2.6] / drivers / video / Kconfig

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e3dc8f8..55b629a 100644 (file)
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -139,6 +139,30 @@ config FB_SYS_IMAGEBLIT
          blitting. This is used by drivers that don't provide their own
          (accelerated) version and the framebuffer is in system RAM.
 
+menuconfig FB_FOREIGN_ENDIAN
+       bool "Framebuffer foreign endianness support"
+       depends on FB
+       ---help---
+         This menu will let you enable support for the framebuffers with
+         non-native endianness (e.g. Little-Endian framebuffer on a
+         Big-Endian machine). Most probably you don't have such hardware,
+         so it's safe to say "n" here.
+
+choice
+       prompt "Choice endianness support"
+       depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+       bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+       bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+       bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
 config FB_SYS_FOPS
        tristate
        depends on FB
@@ -149,6 +173,16 @@ config FB_DEFERRED_IO
        depends on FB
        default y
 
+config FB_METRONOME
+       tristate
+       depends on FB
+       depends on FB_DEFERRED_IO
+
+config FB_HECUBA
+       tristate
+       depends on FB
+       depends on FB_DEFERRED_IO
+
 config FB_SVGALIB
        tristate
        depends on FB
@@ -674,20 +708,18 @@ config FB_IMAC
        help
          This is the frame buffer device driver for the Intel-based Macintosh
 
-config FB_HECUBA
-       tristate "Hecuba board support"
+config FB_N411
+       tristate "N411 Apollo/Hecuba devkit support"
        depends on FB && X86 && MMU
        select FB_SYS_FILLRECT
        select FB_SYS_COPYAREA
        select FB_SYS_IMAGEBLIT
        select FB_SYS_FOPS
        select FB_DEFERRED_IO
+       select FB_HECUBA
        help
-         This enables support for the Hecuba board. This driver was tested
-         with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
-         interface (8 bit data, 4 bit control). If you anticipate using
-         this driver, say Y or M; otherwise say N. You must specify the
-         GPIO IO address to be used for setting control and data.
+         This enables support for the Apollo display controller in its
+         Hecuba form using the n411 devkit.
 
 config FB_HGA
        tristate "Hercules mono graphics support"
@@ -1087,7 +1119,7 @@ config FB_CARILLO_RANCH
          This driver supports the LE80578 (Carillo Ranch) board
 
 config FB_INTEL
-       tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
+       tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
        depends on FB && EXPERIMENTAL && PCI && X86
        select AGP
        select AGP_INTEL
@@ -1097,7 +1129,7 @@ config FB_INTEL
        select FB_CFB_IMAGEBLIT
        help
          This driver supports the on-board graphics built in to the Intel
-          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
           Say Y if you have and plan to use such a board.
 
          If you say Y here and want DDC/I2C support you must first say Y to
@@ -1779,6 +1811,16 @@ config FB_MBX_DEBUG
 
          If unsure, say N.
 
+config FB_FSL_DIU
+       tristate "Freescale DIU framebuffer support"
+       depends on FB && FSL_SOC
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select PPC_LIB_RHEAP
+       ---help---
+         Framebuffer driver for the Freescale SoC DIU
+
 config FB_W100
        tristate "W100 frame buffer support"
        depends on FB && PXA_SHARPSL
@@ -1893,19 +1935,18 @@ config FB_XILINX
          framebuffer. ML300 carries a 640*480 LCD display on the board,
          ML403 uses a standard DB15 VGA connector.
 
-config FB_METRONOME
-       tristate "Metronome display controller support"
+config FB_AM200EPD
+       tristate "AM-200 E-Ink EPD devkit support"
        depends on FB && ARCH_PXA && MMU
        select FB_SYS_FILLRECT
        select FB_SYS_COPYAREA
        select FB_SYS_IMAGEBLIT
        select FB_SYS_FOPS
        select FB_DEFERRED_IO
+       select FB_METRONOME
        help
-         This enables support for the Metronome display controller. Tested
-         with an E-Ink 800x600 display and Gumstix Connex through an AMLCD
-         interface. Please read <file:Documentation/fb/metronomefb.txt>
-         for more information.
+         This enables support for the Metronome display controller used on
+         the E-Ink AM-200 EPD devkit.
 
 config FB_VIRTUAL
        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"