#
menu "Graphics support"
+ depends on HAS_IOMEM
-source "drivers/video/backlight/Kconfig"
-source "drivers/video/display/Kconfig"
+source "drivers/char/agp/Kconfig"
+
+source "drivers/char/drm/Kconfig"
+
+config VGASTATE
+ tristate
+ default n
-config FB
+config VIDEO_OUTPUT_CONTROL
+ tristate "Lowlevel video output switch controls"
+ help
+ This framework adds support for low-level control of the video
+ output switch.
+
+menuconfig FB
tristate "Support for frame buffer devices"
---help---
The frame buffer device provides an abstraction for the graphics
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_CFB_REV_PIXELS_IN_BYTE
+ bool
+ depends on FB
+ default n
+ ---help---
+ Allow generic frame-buffer functions to work on displays with 1, 2
+ and 4 bits per pixel depths which has opposite order of pixels in
+ byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_fillrect function for generic software rectangle
+ filling. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_copyarea function for generic software area copying.
+ This is used by drivers that don't provide their own (accelerated)
+ version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Include the sys_imageblit function for generic software image
+ blitting. This is used by drivers that don't provide their own
+ (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+ bool "Framebuffer foreign endianness support"
+ depends on FB
+ ---help---
+ This menu will let you enable support for the framebuffers with
+ non-native endianness (e.g. Little-Endian framebuffer on a
+ Big-Endian machine). Most probably you don't have such hardware,
+ so it's safe to say "n" here.
+
+choice
+ prompt "Choice endianness support"
+ depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+ bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+ bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+ bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+ tristate
+ depends on FB
+ default n
+
config FB_DEFERRED_IO
bool
depends on FB
default y
+config FB_METRONOME
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
+
+config FB_HECUBA
+ tristate
+ depends on FB
+ depends on FB_DEFERRED_IO
+
config FB_SVGALIB
tristate
depends on FB
config FB_ARC
tristate "Arc Monochrome LCD board support"
depends on FB && X86
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
help
This enables support for the Arc Monochrome LCD board. The board
is based on the KS-108 lcd controller and is typically a matrix
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC32
+ depends on (FB = y) && PPC32 && PCI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
help
This is the frame buffer device driver for VGA 16 color graphic
cards. Say Y if you have such a card.
To compile this driver as a module, choose M here: the
module will be called vga16fb.
+config FB_BF54X_LQ043
+ tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+ depends on FB && (BF54x)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+ tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+ depends on FB && BLACKFIN
+ select BFIN_GPTIMERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+ This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+ It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+
config FB_STI
tristate "HP STI frame buffer device support"
depends on FB && PARISC
Say Y if you have one of those.
+config FB_UVESA
+ tristate "Userspace VESA VGA graphics support"
+ depends on FB && CONNECTOR
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS
+ help
+ This is the frame buffer driver for generic VBE 2.0 compliant
+ graphic cards. It can also take advantage of VBE 3.0 features,
+ such as refresh rate adjustment.
+
+ This driver generally provides more features than vesafb but
+ requires a userspace helper application called 'v86d'. See
+ <file:Documentation/fb/uvesafb.txt> for more information.
+
+ If unsure, say N.
+
config FB_VESA
bool "VESA VGA graphics support"
depends on (FB = y) && X86
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+config FB_EFI
+ bool "EFI-based Framebuffer Support"
+ depends on (FB = y) && X86
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the EFI frame buffer device driver. If the firmware on
+ your platform is UEFI2.0, select Y to add support for
+ Graphics Output Protocol for early console messages to appear.
+
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
depends on (FB = y) && X86 && EFI
help
This is the frame buffer device driver for the Intel-based Macintosh
-config FB_HECUBA
- tristate "Hecuba board support"
+config FB_N411
+ tristate "N411 Apollo/Hecuba devkit support"
depends on FB && X86 && MMU
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
select FB_DEFERRED_IO
+ select FB_HECUBA
help
- This enables support for the Hecuba board. This driver was tested
- with an E-Ink 800x600 display and x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 4 bit control). If you anticpate using
- this driver, say Y or M; otherwise say N. You must specify the
- GPIO IO address to be used for setting control and data.
+ This enables support for the Apollo display controller in its
+ Hecuba form using the n411 devkit.
config FB_HGA
tristate "Hercules mono graphics support"
This is the frame buffer device driver for the CGsix (GX, TurboGX)
frame buffer.
+config FB_FFB
+ bool "Creator/Creator3D/Elite3D support"
+ depends on FB_SBUS && SPARC64
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Creator, Creator3D,
+ and Elite3D graphics boards.
+
+config FB_TCX
+ bool "TCX (SS4/SS5 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the TCX 24/8bit frame
+ buffer.
+
+config FB_CG14
+ bool "CGfourteen (SX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the CGfourteen frame
+ buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+ bool "P9100 (Sparcbook 3 only) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the P9100 card
+ supported on Sparcbook 3 machines.
+
+config FB_LEO
+ bool "Leo (ZX) support"
+ depends on FB_SBUS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the SBUS-based Sun ZX
+ (leo) frame buffer cards.
+
+config FB_IGA
+ bool "IGA 168x display support"
+ depends on (FB = y) && SPARC32
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the INTERGRAPHICS 1680 and
+ successor frame buffer cards.
+
+config FB_XVR500
+ bool "Sun XVR-500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
+config FB_XVR2500
+ bool "Sun XVR-2500 3DLABS Wildcat support"
+ depends on (FB = y) && PCI && SPARC64
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer device for the Sun XVR-2500 and similar
+ graphics cards based upon the 3DLABS Wildcat chipset. The driver
+ only works on sparc64 systems where the system firmware has
+ mostly initialized the card already. It is treated as a
+ completely dumb framebuffer device.
+
config FB_PVR2
tristate "NEC PowerVR 2 display support"
depends on FB && SH_DREAMCAST
config FB_EPSON1355
bool "Epson 1355 framebuffer support"
- depends on (FB = y) && (SUPERH || ARCH_CEIVA)
+ depends on (FB = y) && ARCH_CEIVA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
working with S1D13806). Product specs at
<http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
+config FB_ATMEL
+ tristate "AT91/AT32 LCD Controller support"
+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || AVR32)
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+ bool "Frame Buffer in internal SRAM"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
+ help
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && MACH_AT91SAM9261EK
+ default n
+ help
+ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+ Controller. Say N if you want to connect a TFT.
+
+ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_DEBUG
+ bool "Lots of debug output"
+ depends on FB_NVIDIA
+ default n
+ help
+ Say Y here if you want the nVidia driver to output all sorts
+ of debugging information to provide to the maintainer when
+ something goes wrong.
+
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
depends on FB_NVIDIA
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select BITREVERSE
+ select VGASTATE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
here.
config FB_RIVA_DEBUG
- bool "Lots of debug output from Riva(nVidia) driver"
+ bool "Lots of debug output"
depends on FB_RIVA
default n
help
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports the on-board graphics built in to the Intel 810
and 815 chipsets. Say Y if you have and plan to use such a board.
select FB_DDC
help
+config FB_LE80578
+ tristate "Intel LE80578 (Vermilion) support"
+ depends on FB && PCI && X86
+ select FB_MODE_HELPERS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+ tristate "Intel Carillo Ranch support"
+ depends on FB_LE80578 && FB && PCI && X86
+ help
+ This driver supports the LE80578 (Carillo Ranch) board
+
config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
If you say Y here and want DDC/I2C support you must first say Y to
config FB_ATY_CT
bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
depends on PCI && FB_ATY
- default y if SPARC64 && FB_PCI
+ default y if SPARC64 && PCI
help
Say Y here to support use of ATI's 64-bit Rage boards (or other
boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
select FB_CFB_IMAGEBLIT
select FB_TILEBLITTING
select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
---help---
Driver for graphics boards with S3 Trio / S3 Virge chip.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks and computers with S3 Savage PCI/AGP
chips.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VGASTATE
help
This driver supports notebooks with NeoMagic PCI chips.
Say Y if you have such a graphics card.
WARNING: Do not use any application that uses the 3D engine
(namely glide) while using this driver.
- Please read the <file:Documentation/fb/README-sstfb.txt> for supported
+ Please read the <file:Documentation/fb/sstfb.txt> for supported
options and other important info support.
+config FB_VT8623
+ tristate "VIA VT8623 support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for CastleRock integrated graphics core in the
+ VIA VT8623 [Apollo CLE266] chipset.
+
config FB_CYBLA
tristate "Cyberblade/i1 support"
depends on FB && PCI && X86_32 && !64BIT
This will compile the Trident frame buffer device with
acceleration functions.
+config FB_ARK
+ tristate "ARK 2000PV support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ select VGASTATE
+ select FONT_8x16 if FRAMEBUFFER_CONSOLE
+ ---help---
+ Driver for PCI graphics boards with ARK 2000PV chip
+ and ICS 5342 RAMDAC.
+
config FB_PM3
- tristate "Permedia3 support"
- depends on FB && PCI && BROKEN
+ tristate "Permedia3 support (EXPERIMENTAL)"
+ depends on FB && PCI && EXPERIMENTAL
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the 3DLabs Permedia3
chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
config FB_AU1100
bool "Au1100 LCD Driver"
- depends on (FB = y) && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
+ depends on (FB = y) && MIPS && SOC_AU1100
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the framebuffer driver for the AMD Au1100 SOC. It can drive
+ various panels and CRTs by passing in kernel cmd line option
+ au1100fb:panel=<name>.
config FB_AU1200
bool "Au1200 LCD Driver"
source "drivers/video/geode/Kconfig"
-config FB_FFB
- bool "Creator/Creator3D/Elite3D support"
- depends on FB_SBUS && SPARC64
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the Creator, Creator3D,
- and Elite3D graphics boards.
-
-config FB_TCX
- bool "TCX (SS4/SS5 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the TCX 24/8bit frame
- buffer.
-
-config FB_CG14
- bool "CGfourteen (SX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the CGfourteen frame
- buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
- bool "P9100 (Sparcbook 3 only) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the P9100 card
- supported on Sparcbook 3 machines.
-
-config FB_LEO
- bool "Leo (ZX) support"
- depends on FB_SBUS
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the frame buffer device driver for the SBUS-based Sun ZX
- (leo) frame buffer cards.
-
-config FB_XVR500
- bool "Sun XVR-500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_XVR2500
- bool "Sun XVR-2500 3DLABS Wildcat support"
- depends on FB && PCI && SPARC64
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the Sun XVR-2500 and similar
- graphics cards based upon the 3DLABS Wildcat chipset. The driver
- only works on sparc64 systems where the system firwmare has
- mostly initialized the card already. It is treated as a
- completely dumb framebuffer device.
-
-config FB_PCI
- bool "PCI framebuffers"
- depends on (FB = y) && PCI && SPARC
-
-config FB_IGA
- bool "IGA 168x display support"
- depends on SPARC32 && FB_PCI
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This is the framebuffer device for the INTERGRAPHICS 1680 and
- successor frame buffer cards.
-
config FB_HIT
tristate "HD64461 Frame Buffer support"
depends on FB && HD64461
config FB_PMAGB_B
tristate "PMAGB-B TURBOchannel framebuffer support"
- depends on TC
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
DECstation series (Personal DECstation 5000/20, /25, /33, /50,
Codename "Maxine").
-config FB_TX3912
- bool "TMPTX3912/PR31700 frame buffer support"
- depends on (FB = y) && NINO
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core
- see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>.
-
- Say Y here to enable kernel support for the on-board framebuffer.
-
config FB_G364
bool "G364 frame buffer support"
depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
If unsure, say N.
+config FB_FSL_DIU
+ tristate "Freescale DIU framebuffer support"
+ depends on FB && FSL_SOC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select PPC_LIB_RHEAP
+ ---help---
+ Framebuffer driver for the Freescale SoC DIU
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called sm501fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_IBM_GXT4500
tristate "Framebuffer support for IBM GXT4500P adaptor"
- depends on PPC
+ depends on FB && PPC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
adaptor, found on some IBM System P (pSeries) machines.
config FB_PS3
- bool "PS3 GPU framebuffer driver"
- depends on (FB = y) && PS3_PS3AV
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
+ tristate "PS3 GPU framebuffer driver"
+ depends on FB && PS3_PS3AV
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
---help---
Include support for the virtual frame buffer in the PS3 platform.
config FB_PS3_DEFAULT_SIZE_M
int "PS3 default frame buffer size (in MiB)"
depends on FB_PS3
- default 18
+ default 9
---help---
This is the default size (in MiB) of the virtual frame buffer in
the PS3.
The default value can be overridden on the kernel command line
using the "ps3fb" option (e.g. "ps3fb=9M");
-config FB_VIRTUAL
- tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
- depends on FB
+config FB_XILINX
+ tristate "Xilinx frame buffer support"
+ depends on FB && XILINX_VIRTEX
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
+ Include support for the Xilinx ML300/ML403 reference design
+ framebuffer. ML300 carries a 640*480 LCD display on the board,
+ ML403 uses a standard DB15 VGA connector.
+
+config FB_AM200EPD
+ tristate "AM-200 E-Ink EPD devkit support"
+ depends on FB && ARCH_PXA && MMU
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ select FB_METRONOME
+ help
+ This enables support for the Metronome display controller used on
+ the E-Ink AM-200 EPD devkit.
+
+config FB_VIRTUAL
+ tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+ depends on FB
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ ---help---
This is a `virtual' frame buffer device. It operates on a chunk of
unswappable kernel memory instead of on the memory of a graphics
board. This means you cannot see any output sent to this frame
If unsure, say N.
+config XEN_FBDEV_FRONTEND
+ tristate "Xen virtual frame buffer support"
+ depends on FB && XEN
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_DEFERRED_IO
+ default y
+ help
+ This driver implements the front-end of the Xen virtual
+ frame buffer driver. It communicates with a back-end
+ in another domain.
+
+source "drivers/video/omap/Kconfig"
+
+source "drivers/video/backlight/Kconfig"
+source "drivers/video/display/Kconfig"
+
if VT
source "drivers/video/console/Kconfig"
endif
endif
endmenu
-
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff