menu "Graphics support"
+source "drivers/video/backlight/Kconfig"
+
config FB
tristate "Support for frame buffer devices"
---help---
(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FIRMWARE_EDID
+ bool "Enable firmware EDID"
+ depends on FB
+ default n
+ ---help---
+ This enables access to the EDID transferred from the firmware.
+ On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+ transfers do not work for your driver and if you are using
+ nvidiafb, i810fb or savagefb.
+
+ In general, choosing Y for this option is safe. If you
+ experience extremely long delays while booting before you get
+ something on your display, try setting this to N. Matrox cards in
+ combination with certain motherboards and monitors are known to
+ suffer from this problem.
+
+config FB_DDC
+ tristate
+ depends on FB
+ select I2C_ALGOBIT
+ select I2C
+ default n
+
config FB_CFB_FILLRECT
tristate
depends on FB
blitting. This is used by drivers that don't provide their own
(accelerated) version.
+config FB_SVGALIB
+ tristate
+ depends on FB
+ default n
+ ---help---
+ Common utility functions useful to fbdev drivers of VGA-based
+ cards.
+
config FB_MACMODES
tristate
depends on FB
default n
-config FB_FIRMWARE_EDID
- bool "Enable firmware EDID"
- depends on FB
- default y
- ---help---
- This enables access to the EDID transferred from the firmware.
- On the i386, this is from the Video BIOS. Enable this if DDC/I2C
- transfers do not work for your driver and if you are using
- nvidiafb, i810fb or savagefb.
-
- In general, choosing Y for this option is safe. If you
- experience extremely long delays while booting before you get
- something on your display, try setting this to N. Matrox cards in
- combination with certain motherboards and monitors are known to
- suffer from this problem.
+config FB_BACKLIGHT
+ bool
+ depends on FB
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
This is particularly important to one driver, matroxfb. If
unsure, say N.
+comment "Frame buffer hardware drivers"
+ depends on FB
+
config FB_CIRRUS
tristate "Cirrus Logic support"
depends on FB && (ZORRO || PCI)
If you want to compile this as a module (=code which can be
inserted into and removed from the running kernel), say M
- here and read <file:Documentation/modules.txt>. The module
+ here and read <file:Documentation/kbuild/modules.txt>. The module
will be called amba-clcd.
+choice
+
+ depends on FB_ARMCLCD && (ARCH_LH7A40X || ARCH_LH7952X)
+ prompt "LCD Panel"
+ default FB_ARMCLCD_SHARP_LQ035Q7DB02
+
+config FB_ARMCLCD_SHARP_LQ035Q7DB02_HRTFT
+ bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
+ help
+ This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
+ color QVGA, HRTFT panel. The LogicPD device includes
+ an integrated HRTFT controller IC.
+ The native resolution is 240x320.
+
+config FB_ARMCLCD_SHARP_LQ057Q3DC02
+ bool "LogicPD LCD 5.7\" QVGA"
+ help
+ This is an implementation of the Sharp LQ057Q3DC02, a 5.7"
+ color QVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 320x240.
+
+config FB_ARMCLCD_SHARP_LQ64D343
+ bool "LogicPD LCD 6.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ64D343, a 6.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+config FB_ARMCLCD_SHARP_LQ10D368
+ bool "LogicPD LCD 10.4\" VGA"
+ help
+ This is an implementation of the Sharp LQ10D368, a 10.4"
+ color VGA, TFT panel. The LogicPD device includes an
+ The native resolution is 640x480.
+
+
+config FB_ARMCLCD_SHARP_LQ121S1DG41
+ bool "LogicPD LCD 12.1\" SVGA"
+ help
+ This is an implementation of the Sharp LQ121S1DG41, a 12.1"
+ color SVGA, TFT panel. The LogicPD device includes an
+ The native resolution is 800x600.
+
+ This panel requires a clock rate may be an integer fraction
+ of the base LCDCLK frequency. The driver will select the
+ highest frequency available that is lower than the maximum
+ allowed. The panel may flicker if the clock rate is
+ slower than the recommended minimum.
+
+config FB_ARMCLCD_AUO_A070VW01_WIDE
+ bool "AU Optronics A070VW01 LCD 7.0\" WIDE"
+ help
+ This is an implementation of the AU Optronics, a 7.0"
+ WIDE Color. The native resolution is 234x480.
+
+config FB_ARMCLCD_HITACHI
+ bool "Hitachi Wide Screen 800x480"
+ help
+ This is an implementation of the Hitachi 800x480.
+
+endchoice
+
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && (ARCH_ACORN || ARCH_CLPS7500)
and CD32. If you intend to run Linux on any of these systems, say Y;
otherwise say N.
-config FB_CYBER
- tristate "Amiga CyberVision 64 support"
- depends on FB && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64 graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64 or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the
- Cybervision 64/3D card, as they use incompatible video chips.
-
-config FB_VIRGE
- bool "Amiga CyberVision 64/3D support "
- depends on (FB = y) && ZORRO && BROKEN
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- This enables support for the Cybervision 64/3D graphics card from
- Phase5. Please note that its use is not all that intuitive (i.e. if
- you have any questions, be sure to ask!). Say N unless you have a
- Cybervision 64/3D or plan to get one before you next recompile the
- kernel. Please note that this driver DOES NOT support the older
- Cybervision 64 card, as they use incompatible video chips.
-
-config FB_RETINAZ3
- tristate "Amiga Retina Z3 support"
- depends on (FB = y) && ZORRO && BROKEN
- help
- This enables support for the Retina Z3 graphics card. Say N unless
- you have a Retina Z3 or plan to get one before you next recompile
- the kernel.
-
config FB_FM2
bool "Amiga FrameMaster II/Rainbow II support"
depends on (FB = y) && ZORRO
is based on the KS-108 lcd controller and is typically a matrix
of 2*n chips. This driver was tested with a 128x64 panel. This
driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticpate using
+ interface (8 bit data, 8 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
config FB_ATARI
bool "Atari native chipset support"
- depends on (FB = y) && ATARI && BROKEN
+ depends on (FB = y) && ATARI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the builtin graphics
chipset found in Ataris.
config FB_OF
bool "Open Firmware frame buffer device support"
- depends on (FB = y) && (PPC64 || PPC_OF)
+ depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CONTROL
bool "Apple \"control\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_PLATINUM
bool "Apple \"platinum\" display support"
- depends on (FB = y) && PPC_PMAC
+ depends on (FB = y) && PPC_PMAC && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_VALKYRIE
bool "Apple \"valkyrie\" display support"
- depends on (FB = y) && (MAC || PPC_PMAC)
+ depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CT65550
bool "Chips 65550 display support"
- depends on (FB = y) && PPC
+ depends on (FB = y) && PPC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Asiliant 69030 chipset
config FB_IMSTT
bool "IMS Twin Turbo display support"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This is the frame buffer device driver for generic TGA graphic
cards. Say Y if you have one of those.
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select VIDEO_SELECT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
You will get a boot time penguin logo at no additional cost. Please
read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-config VIDEO_SELECT
- bool
- depends on FB_VESA
- default y
+config FB_IMAC
+ bool "Intel-based Macintosh Framebuffer Support"
+ depends on (FB = y) && X86 && EFI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ This is the frame buffer device driver for the Intel-based Macintosh
config FB_HGA
tristate "Hercules mono graphics support"
This will compile the Hercules mono graphics with
acceleration functions.
-
-config VIDEO_SELECT
- bool
- depends on (FB = y) && X86
- default y
-
config FB_SGIVW
tristate "SGI Visual Workstation framebuffer support"
depends on FB && X86_VISWS
This is the amount of memory reserved for the framebuffer,
which can be any value between 1MB and 8MB.
-config FB_SUN3
- bool "Sun3 framebuffer support"
- depends on (FB = y) && (SUN3 || SUN3X) && BROKEN
-
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on (FB = y) && SPARC
config FB_BW2
bool "BWtwo support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG3
bool "CGthree support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_CG6
bool "CGsix (GX,TurboGX) support"
- depends on (FB = y) && (SPARC && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3)
+ depends on (FB = y) && (SPARC && FB_SBUS)
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_NVIDIA_I2C
- select I2C if FB_NVIDIA_I2C
+ select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia chips, TNT
and newer. For very old chipsets, such as the RIVA128, then use
config FB_NVIDIA_I2C
bool "Enable DDC Support"
depends on FB_NVIDIA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
independently validate video mode parameters, you should say Y
here.
+config FB_NVIDIA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_NVIDIA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RIVA
tristate "nVidia Riva support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RIVA_I2C
- select I2C if FB_RIVA_I2C
+ select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select BITREVERSE
help
This driver supports graphics boards with the nVidia Riva/Geforce
chips.
config FB_RIVA_I2C
bool "Enable DDC Support"
depends on FB_RIVA
+ select FB_DDC
help
This enables I2C support for nVidia Chipsets. This is used
only for getting EDID information from the attached display
default n
help
Say Y here if you want the Riva driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
+config FB_RIVA_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RIVA
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_I810
tristate "Intel 810/815 support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86_32
config FB_I810_I2C
bool "Enable DDC Support"
depends on FB_I810 && FB_I810_GTF
- select I2C
- select I2C_ALGOBIT
+ select FB_DDC
help
config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G chipsets.
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
Say Y if you have and plan to use such a board.
- To compile this driver as a module, choose M here: the
+ If you say Y here and want DDC/I2C support you must first say Y to
+ "I2C support" and "I2C bit-banging support" in the character devices
+ section.
+
+ If you say M here then "I2C support" and "I2C bit-banging support"
+ can be build either as modules or built-in.
+
+ To compile this driver as a module, choose M here: the
module will be called intelfb.
+ For more information, please read <file:Documentation/fb/intelfb.txt>
+
config FB_INTEL_DEBUG
- bool "Intel driver Debug Messages"
+ bool "Intel driver Debug Messages"
depends on FB_INTEL
---help---
Say Y here if you want the Intel driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
+config FB_INTEL_I2C
+ bool "DDC/I2C for Intel framebuffer support"
+ depends on FB_INTEL
+ select FB_DDC
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
config FB_MATROX_I2C
tristate "Matrox I2C support"
- depends on FB_MATROX && I2C
- select I2C_ALGOBIT
+ depends on FB_MATROX
+ select FB_DDC
---help---
This drivers creates I2C buses which are needed for accessing the
DDC (I2C) bus present on all Matroxes, an I2C bus which
config FB_RADEON
tristate "ATI Radeon display support"
depends on FB && PCI
- select I2C_ALGOBIT if FB_RADEON_I2C
- select I2C if FB_RADEON_I2C
+ select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
There is a product page at
http://apps.ati.com/ATIcompare/
+
config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
depends on FB_RADEON
+ select FB_DDC
default y
help
Say Y here if you want DDC/I2C support for your Radeon board.
+config FB_RADEON_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_RADEON
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_RADEON_DEBUG
bool "Lots of debug output from Radeon driver"
depends on FB_RADEON
default n
help
Say Y here if you want the Radeon driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_ATY128
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
select FB_MACMODES if PPC_PMAC
help
This driver supports graphics boards with the ATI Rage128 chips.
To compile this driver as a module, choose M here: the
module will be called aty128fb.
+config FB_ATY128_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY128
+ default y
+ help
+ Say Y here if you want to control the backlight of your display.
+
config FB_ATY
tristate "ATI Mach64 display support" if PCI || ATARI
- depends on FB
+ depends on FB && !SPARC32
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select FB_BACKLIGHT if FB_ATY_BACKLIGHT
select FB_MACMODES if PPC
help
This driver supports graphics boards with the ATI Mach64 chips.
is at
<http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-config FB_S3TRIO
- bool "S3 Trio display support"
- depends on (FB = y) && PPC && BROKEN
+config FB_ATY_BACKLIGHT
+ bool "Support for backlight control"
+ depends on FB_ATY
+ default y
help
- If you have a S3 Trio say Y. Say N for S3 Virge.
+ Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+ tristate "S3 Trio/Virge support"
+ depends on FB && PCI
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_TILEBLITTING
+ select FB_SVGALIB
+ ---help---
+ Driver for graphics boards with S3 Trio / S3 Virge chip.
config FB_SAVAGE
tristate "S3 Savage support"
depends on FB && PCI && EXPERIMENTAL
- select I2C_ALGOBIT if FB_SAVAGE_I2C
- select I2C if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_SAVAGE_I2C
bool "Enable DDC2 Support"
depends on FB_SAVAGE
+ select FB_DDC
help
This enables I2C support for S3 Savage Chipsets. This is used
only for getting EDID information from the attached display
config FB_AU1200
bool "Au1200 LCD Driver"
- depends on FB && MIPS && SOC_AU1200
+ depends on (FB = y) && MIPS && SOC_AU1200
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
used mainly in the MIPS-based DECstation series.
config FB_PMAG_BA
- bool "PMAG-BA TURBOchannel framebuffer support"
- depends on (FB = y) && TC
+ tristate "PMAG-BA TURBOchannel framebuffer support"
+ depends on FB && TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
used mainly in the MIPS-based DECstation series.
config FB_PMAGB_B
- bool "PMAGB-B TURBOchannel framebuffer support"
- depends on (FB = y) && TC
+ tristate "PMAGB-B TURBOchannel framebuffer support"
+ depends on TC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_68328
bool "Motorola 68328 native frame buffer support"
- depends on FB && (M68328 || M68EZ328 || M68VZ328)
+ depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called pxafb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
<file:Documentation/fb/pxafb.txt> describes the available parameters.
+config FB_MBX
+ tristate "2700G LCD framebuffer support"
+ depends on FB && ARCH_PXA
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Framebuffer driver for the Intel 2700G (Marathon) Graphics
+ Accelerator
+
+config FB_MBX_DEBUG
+ bool "Enable debugging info via debugfs"
+ depends on FB_MBX && DEBUG_FS
+ default n
+ ---help---
+ Enable this if you want debugging information using the debug
+ filesystem (debugfs)
+
+ If unsure, say N.
+
config FB_W100
tristate "W100 frame buffer support"
depends on FB && PXA_SHARPSL
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called w100fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
This driver is also available as a module ( = code which can be
inserted and removed from the running kernel whenever you want). The
module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/modules.txt>.
+ say M here and read <file:Documentation/kbuild/modules.txt>.
If unsure, say N.
config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config FB_SM501
+ tristate "Silicon Motion SM501 framebuffer support"
+ depends on FB && MFD_SM501
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Frame buffer driver for the CRT and LCD controllers in the Silicon
+ Motion SM501.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called sm501fb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+
+config FB_PNX4008_DUM
+ tristate "Display Update Module support on Philips PNX4008 board"
+ depends on FB && ARCH_PNX4008
+ ---help---
+ Say Y here to enable support for PNX4008 Display Update Module (DUM)
+
+config FB_PNX4008_DUM_RGB
+ tristate "RGB Framebuffer support on Philips PNX4008 board"
+ depends on FB_PNX4008_DUM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for PNX4008 RGB Framebuffer
+
+config FB_IBM_GXT4500
+ tristate "Framebuffer support for IBM GXT4500P adaptor"
+ depends on PPC
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Say Y here to enable support for the IBM GXT4500P display
+ adaptor, found on some IBM System P (pSeries) machines.
+
+config FB_PS3
+ bool "PS3 GPU framebuffer driver"
+ depends on (FB = y) && PS3_PS3AV
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ ---help---
+ Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+ int "PS3 default frame buffer size (in MiB)"
+ depends on FB_PS3
+ default 18
+ ---help---
+ This is the default size (in MiB) of the virtual frame buffer in
+ the PS3.
+ The default value can be overridden on the kernel command line
+ using the "ps3fb" option (e.g. "ps3fb=9M");
+
config FB_VIRTUAL
tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
depends on FB
kernel option `video=vfb:'.
To compile this driver as a module, choose M here: the
- module will be called vfb.
+ module will be called vfb. In order to load it, you must use
+ the vfb_enable=1 option.
If unsure, say N.
+
if VT
source "drivers/video/console/Kconfig"
endif
source "drivers/video/logo/Kconfig"
endif
-if FB && SYSFS
- source "drivers/video/backlight/Kconfig"
-endif
-
endmenu
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff