/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
+#include <linux/usb/serial.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
-#include "usb-serial.h"
#include "cypress_m8.h"
int cmd_ctrl; /* always set this to 1 before issuing a command */
struct cypress_buf *buf; /* write buffer */
int write_urb_in_use; /* write urb in use indicator */
+ int write_urb_interval; /* interval to use for write urb */
+ int read_urb_interval; /* interval to use for read urb */
+ int comm_is_ok; /* true if communication is (still) ok */
int termios_initialized;
__u8 line_control; /* holds dtr / rts value */
__u8 current_status; /* received from last read - info on dsr,cts,cd,ri,etc */
wait_queue_head_t delta_msr_wait; /* used for TIOCMIWAIT */
char prev_status, diff_status; /* used for TIOCMIWAIT */
/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
- struct termios tmp_termios; /* stores the old termios settings */
+ struct ktermios tmp_termios; /* stores the old termios settings */
};
/* write buffer structure */
static void cypress_send (struct usb_serial_port *port);
static int cypress_write_room (struct usb_serial_port *port);
static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios (struct usb_serial_port *port, struct termios * old);
+static void cypress_set_termios (struct usb_serial_port *port, struct ktermios * old);
static int cypress_tiocmget (struct usb_serial_port *port, struct file *file);
static int cypress_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static int cypress_chars_in_buffer (struct usb_serial_port *port);
static void cypress_throttle (struct usb_serial_port *port);
static void cypress_unthrottle (struct usb_serial_port *port);
-static void cypress_read_int_callback (struct urb *urb, struct pt_regs *regs);
-static void cypress_write_int_callback (struct urb *urb, struct pt_regs *regs);
+static void cypress_set_dead (struct usb_serial_port *port);
+static void cypress_read_int_callback (struct urb *urb);
+static void cypress_write_int_callback (struct urb *urb);
/* baud helper functions */
static int mask_to_rate (unsigned mask);
static unsigned rate_to_mask (int rate);
priv = usb_get_serial_port_data(port);
+ if (!priv->comm_is_ok)
+ return -ENODEV;
+
switch(cypress_request_type) {
case CYPRESS_SET_CONFIG:
if (tries++ >= 3)
break;
- if (retval == EPIPE)
- usb_clear_halt(port->serial->dev, 0x00);
- } while (retval != 8 && retval != ENODEV);
+ } while (retval != 8 && retval != -ENODEV);
- if (retval != 8)
+ if (retval != 8) {
err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
- else {
+ cypress_set_dead(port);
+ } else {
spin_lock_irqsave(&priv->lock, flags);
priv->baud_rate = new_baudrate;
priv->cbr_mask = baud_mask;
if (tries++ >= 3)
break;
- if (retval == EPIPE)
- usb_clear_halt(port->serial->dev, 0x00);
- } while (retval != 5 && retval != ENODEV);
+ } while (retval != 5 && retval != -ENODEV);
if (retval != 5) {
err("%s - failed to retrieve serial line settings - %d", __FUNCTION__, retval);
+ cypress_set_dead(port);
return retval;
} else {
spin_lock_irqsave(&priv->lock, flags);
} /* cypress_serial_control */
+static void cypress_set_dead(struct usb_serial_port *port)
+{
+ struct cypress_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (!priv->comm_is_ok) {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return;
+ }
+ priv->comm_is_ok = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ err("cypress_m8 suspending failing port %d - interval might be too short",
+ port->number);
+}
+
+
/* given a baud mask, it will return integer baud on success */
static int mask_to_rate (unsigned mask)
{
static int generic_startup (struct usb_serial *serial)
{
struct cypress_private *priv;
+ struct usb_serial_port *port = serial->port[0];
- dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
+ dbg("%s - port %d", __FUNCTION__, port->number);
priv = kzalloc(sizeof (struct cypress_private), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->comm_is_ok = !0;
spin_lock_init(&priv->lock);
priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
if (priv->buf == NULL) {
usb_reset_configuration (serial->dev);
- interval = 1;
priv->cmd_ctrl = 0;
priv->line_control = 0;
priv->termios_initialized = 0;
priv->rx_flags = 0;
priv->cbr_mask = B300;
- usb_set_serial_port_data(serial->port[0], priv);
+ if (interval > 0) {
+ priv->write_urb_interval = interval;
+ priv->read_urb_interval = interval;
+ dbg("%s - port %d read & write intervals forced to %d",
+ __FUNCTION__,port->number,interval);
+ } else {
+ priv->write_urb_interval = port->interrupt_out_urb->interval;
+ priv->read_urb_interval = port->interrupt_in_urb->interval;
+ dbg("%s - port %d intervals: read=%d write=%d",
+ __FUNCTION__,port->number,
+ priv->read_urb_interval,priv->write_urb_interval);
+ }
+ usb_set_serial_port_data(port, priv);
return 0;
}
dbg("%s - port %d", __FUNCTION__, port->number);
+ if (!priv->comm_is_ok)
+ return -EIO;
+
/* clear halts before open */
usb_clear_halt(serial->dev, 0x81);
usb_clear_halt(serial->dev, 0x02);
usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, interval);
+ cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result){
dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ cypress_set_dead(port);
}
return result;
struct cypress_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
+ if (!priv->comm_is_ok)
+ return;
+
dbg("%s - port %d", __FUNCTION__, port->number);
dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
port->interrupt_out_urb->transfer_buffer);
- port->interrupt_out_urb->transfer_buffer_length = actual_size;
- port->interrupt_out_urb->dev = port->serial->dev;
- port->interrupt_out_urb->interval = interval;
+ usb_fill_int_urb(port->interrupt_out_urb, port->serial->dev,
+ usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+ port->interrupt_out_buffer, port->interrupt_out_size,
+ cypress_write_int_callback, port, priv->write_urb_interval);
result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
if (result) {
dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
result);
priv->write_urb_in_use = 0;
+ cypress_set_dead(port);
}
spin_lock_irqsave(&priv->lock, flags);
switch (cmd) {
case TIOCGSERIAL:
- if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
+ if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct ktermios))) {
return -EFAULT;
}
return (0);
break;
case TIOCSSERIAL:
- if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
+ if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct ktermios))) {
return -EFAULT;
}
/* here we need to call cypress_set_termios to invoke the new settings */
static void cypress_set_termios (struct usb_serial_port *port,
- struct termios *old_termios)
+ struct ktermios *old_termios)
{
struct cypress_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
+ if (!priv->comm_is_ok)
+ return;
+
if (actually_throttled) {
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
+ if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
"error %d\n", __FUNCTION__, result);
+ cypress_set_dead(port);
+ }
}
}
-static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
+static void cypress_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct cypress_private *priv = usb_get_serial_port_data(port);
dbg("%s - port %d", __FUNCTION__, port->number);
- if (urb->status) {
- dbg("%s - nonzero read status received: %d", __FUNCTION__,
- urb->status);
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* precursor to disconnect so just go away */
+ return;
+ case -EPIPE:
+ usb_clear_halt(port->serial->dev,0x81);
+ break;
+ default:
+ /* something ugly is going on... */
+ dev_err(&urb->dev->dev,"%s - unexpected nonzero read status received: %d\n",
+ __FUNCTION__,urb->status);
+ cypress_set_dead(port);
return;
}
/* Continue trying to always read... unless the port has closed. */
- if (port->open_count > 0) {
+ if (port->open_count > 0 && priv->comm_is_ok) {
usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe(port->serial->dev,
port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
- cypress_read_int_callback, port, interval);
+ cypress_read_int_callback, port, priv->read_urb_interval);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
- if (result)
+ if (result) {
dev_err(&urb->dev->dev, "%s - failed resubmitting "
"read urb, error %d\n", __FUNCTION__,
result);
+ cypress_set_dead(port);
+ }
}
return;
} /* cypress_read_int_callback */
-static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs)
+static void cypress_write_int_callback(struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct cypress_private *priv = usb_get_serial_port_data(port);
dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
priv->write_urb_in_use = 0;
return;
- case -EPIPE: /* no break needed */
+ case -EPIPE: /* no break needed; clear halt and resubmit */
+ if (!priv->comm_is_ok)
+ break;
usb_clear_halt(port->serial->dev, 0x02);
- default:
/* error in the urb, so we have to resubmit it */
- dbg("%s - Overflow in write", __FUNCTION__);
dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
port->interrupt_out_urb->transfer_buffer_length = 1;
port->interrupt_out_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
- if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
- __FUNCTION__, result);
- else
+ if (!result)
return;
+ dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
+ __FUNCTION__, result);
+ cypress_set_dead(port);
+ break;
+ default:
+ dev_err(&urb->dev->dev,"%s - unexpected nonzero write status received: %d\n",
+ __FUNCTION__,urb->status);
+ cypress_set_dead(port);
+ break;
}
priv->write_urb_in_use = 0;
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
+
failed_usb_register:
- usb_deregister(&cypress_driver);
-failed_ca42v2_register:
usb_serial_deregister(&cypress_ca42v2_device);
-failed_hidcom_register:
+failed_ca42v2_register:
usb_serial_deregister(&cypress_hidcom_device);
-failed_em_register:
+failed_hidcom_register:
usb_serial_deregister(&cypress_earthmate_device);
-
+failed_em_register:
return retval;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff