#define DEBUG 1
// #define VERBOSE
-#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ioport.h>
-#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <asm/system.h>
#include <asm/unaligned.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
static unsigned qlen = 32;
static unsigned pattern = 0;
-module_param (buflen, uint, S_IRUGO|S_IWUSR);
-module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (buflen, uint, S_IRUGO);
+module_param (qlen, uint, S_IRUGO);
module_param (pattern, uint, S_IRUGO|S_IWUSR);
/*
switch (status) {
case 0: /* normal completion? */
- if (ep == dev->out_ep)
+ if (ep == dev->out_ep) {
check_read_data (dev, ep, req);
- else
+ memset (req->buf, 0x55, req->length);
+ } else
reinit_write_data (dev, ep, req);
break;
}
static struct usb_request *
-source_sink_start_ep (struct usb_ep *ep, int gfp_flags)
+source_sink_start_ep (struct usb_ep *ep, gfp_t gfp_flags)
{
struct usb_request *req;
int status;
if (strcmp (ep->name, EP_IN_NAME) == 0)
reinit_write_data (ep->driver_data, ep, req);
+ else
+ memset (req->buf, 0x55, req->length);
status = usb_ep_queue (ep, req, gfp_flags);
if (status) {
}
static int
-set_source_sink_config (struct zero_dev *dev, int gfp_flags)
+set_source_sink_config (struct zero_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_ep *ep;
}
static int
-set_loopback_config (struct zero_dev *dev, int gfp_flags)
+set_loopback_config (struct zero_dev *dev, gfp_t gfp_flags)
{
int result = 0;
struct usb_ep *ep;
* by limiting configuration choices (like the pxa2xx).
*/
static int
-zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
+zero_set_config (struct zero_dev *dev, unsigned number, gfp_t gfp_flags)
{
int result = 0;
struct usb_gadget *gadget = dev->gadget;
/*-------------------------------------------------------------------------*/
-static void
+static void /* __init_or_exit */
zero_unbind (struct usb_gadget *gadget)
{
struct zero_dev *dev = get_gadget_data (gadget);
DBG (dev, "unbind\n");
/* we've already been disconnected ... no i/o is active */
- if (dev->req)
+ if (dev->req) {
+ dev->req->length = USB_BUFSIZ;
free_ep_req (gadget->ep0, dev->req);
+ }
del_timer_sync (&dev->resume);
kfree (dev);
set_gadget_data (gadget, NULL);
}
-static int
+static int __init
zero_bind (struct usb_gadget *gadget)
{
struct zero_dev *dev;
struct usb_ep *ep;
+ int gcnum;
+
+ /* FIXME this can't yet work right with SH ... it has only
+ * one configuration, numbered one.
+ */
+ if (gadget_is_sh(gadget))
+ return -ENODEV;
/* Bulk-only drivers like this one SHOULD be able to
* autoconfigure on any sane usb controller driver,
EP_OUT_NAME = ep->name;
ep->driver_data = ep; /* claim */
-
- /*
- * DRIVER POLICY CHOICE: you may want to do this differently.
- * One thing to avoid is reusing a bcdDevice revision code
- * with different host-visible configurations or behavior
- * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
- */
- if (gadget_is_net2280 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
- } else if (gadget_is_pxa (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
-#if 0
- } else if (gadget_is_sh(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
- /* SH has only one configuration; see "loopdefault" */
- device_desc.bNumConfigurations = 1;
- /* FIXME make 1 == default.bConfigurationValue */
-#endif
- } else if (gadget_is_sa1100 (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
- } else if (gadget_is_goku (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
- } else if (gadget_is_mq11xx (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
- } else if (gadget_is_omap (gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
- } else if (gadget_is_lh7a40x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
- } else if (gadget_is_n9604(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
- } else if (gadget_is_pxa27x(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
- } else if (gadget_is_s3c2410(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
- } else if (gadget_is_at91(gadget)) {
- device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
- } else {
+ gcnum = usb_gadget_controller_number (gadget);
+ if (gcnum >= 0)
+ device_desc.bcdDevice = cpu_to_le16 (0x0200 + gcnum);
+ else {
/* gadget zero is so simple (for now, no altsettings) that
* it SHOULD NOT have problems with bulk-capable hardware.
* so warn about unrcognized controllers, don't panic.
/* ok, we made sense of the hardware ... */
- dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- memset (dev, 0, sizeof *dev);
spin_lock_init (&dev->lock);
dev->gadget = gadget;
set_gadget_data (gadget, dev);
loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- if (gadget->is_otg) {
- otg_descriptor.bmAttributes |= USB_OTG_HNP,
- source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- }
-
usb_gadget_set_selfpowered (gadget);
init_timer (&dev->resume);
EP_OUT_NAME, EP_IN_NAME);
snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
- system_utsname.sysname, system_utsname.release,
+ init_utsname()->sysname, init_utsname()->release,
gadget->name);
return 0;
#endif
.function = (char *) longname,
.bind = zero_bind,
- .unbind = zero_unbind,
+ .unbind = __exit_p(zero_unbind),
.setup = zero_setup,
.disconnect = zero_disconnect,
.driver = {
.name = (char *) shortname,
- // .shutdown = ...
- // .suspend = ...
- // .resume = ...
+ .owner = THIS_MODULE,
},
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff