*
*/
-#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/list.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/ioctl.h>
#include <linux/usb.h>
#include <linux/usbdevice_fs.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
+#include <linux/freezer.h>
#include <asm/semaphore.h>
#include <asm/uaccess.h>
#include "hcd.h"
#include "hub.h"
+#ifdef CONFIG_USB_PERSIST
+#define USB_PERSIST 1
+#else
+#define USB_PERSIST 0
+#endif
+
+struct usb_hub {
+ struct device *intfdev; /* the "interface" device */
+ struct usb_device *hdev;
+ struct kref kref;
+ struct urb *urb; /* for interrupt polling pipe */
+
+ /* buffer for urb ... with extra space in case of babble */
+ char (*buffer)[8];
+ dma_addr_t buffer_dma; /* DMA address for buffer */
+ union {
+ struct usb_hub_status hub;
+ struct usb_port_status port;
+ } *status; /* buffer for status reports */
+ struct mutex status_mutex; /* for the status buffer */
+
+ int error; /* last reported error */
+ int nerrors; /* track consecutive errors */
+
+ struct list_head event_list; /* hubs w/data or errs ready */
+ unsigned long event_bits[1]; /* status change bitmask */
+ unsigned long change_bits[1]; /* ports with logical connect
+ status change */
+ unsigned long busy_bits[1]; /* ports being reset or
+ resumed */
+#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
+#error event_bits[] is too short!
+#endif
+
+ struct usb_hub_descriptor *descriptor; /* class descriptor */
+ struct usb_tt tt; /* Transaction Translator */
+
+ unsigned mA_per_port; /* current for each child */
+
+ unsigned limited_power:1;
+ unsigned quiescing:1;
+ unsigned activating:1;
+ unsigned disconnected:1;
+
+ unsigned has_indicators:1;
+ u8 indicator[USB_MAXCHILDREN];
+ struct delayed_work leds;
+};
+
+
/* Protect struct usb_device->state and ->children members
* Note: Both are also protected by ->dev.sem, except that ->state can
* change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
"first one fails");
-#ifdef DEBUG
-static inline char *portspeed (int portstatus)
+static inline char *portspeed(int portstatus)
{
if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
return "480 Mb/s";
else
return "12 Mb/s";
}
-#endif
/* Note that hdev or one of its children must be locked! */
static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
#define LED_CYCLE_PERIOD ((2*HZ)/3)
-static void led_work (void *__hub)
+static void led_work (struct work_struct *work)
{
- struct usb_hub *hub = __hub;
+ struct usb_hub *hub =
+ container_of(work, struct usb_hub, leds.work);
struct usb_device *hdev = hub->hdev;
unsigned i;
unsigned changed = 0;
{
unsigned long flags;
+ /* Suppress autosuspend until khubd runs */
+ to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+
spin_lock_irqsave(&hub_event_lock, flags);
- if (list_empty(&hub->event_list)) {
+ if (!hub->disconnected & list_empty(&hub->event_list)) {
list_add_tail(&hub->event_list, &hub_event_list);
wake_up(&khubd_wait);
}
void usb_kick_khubd(struct usb_device *hdev)
{
+ /* FIXME: What if hdev isn't bound to the hub driver? */
kick_khubd(hdev_to_hub(hdev));
}
/* completion function, fires on port status changes and various faults */
-static void hub_irq(struct urb *urb, struct pt_regs *regs)
+static void hub_irq(struct urb *urb)
{
- struct usb_hub *hub = (struct usb_hub *)urb->context;
+ struct usb_hub *hub = urb->context;
int status;
int i;
unsigned long bits;
goto resubmit;
hub->error = urb->status;
/* FALL THROUGH */
-
+
/* let khubd handle things */
case 0: /* we got data: port status changed */
bits = 0;
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (void *arg)
+static void hub_tt_kevent (struct work_struct *work)
{
- struct usb_hub *hub = arg;
+ struct usb_hub *hub =
+ container_of(work, struct usb_hub, tt.kevent);
unsigned long flags;
+ int limit = 100;
spin_lock_irqsave (&hub->tt.lock, flags);
- while (!list_empty (&hub->tt.clear_list)) {
+ while (--limit && !list_empty (&hub->tt.clear_list)) {
struct list_head *temp;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
* since each TT has "at least two" buffers that can need it (and
* there can be many TTs per hub). even if they're uncommon.
*/
- if ((clear = kmalloc (sizeof *clear, SLAB_ATOMIC)) == NULL) {
+ if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
return;
{
int port1;
unsigned pgood_delay = hub->descriptor->bPwrOn2PwrGood * 2;
- u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
-
- /* if hub supports power switching, enable power on each port */
- if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2) {
+ u16 wHubCharacteristics =
+ le16_to_cpu(hub->descriptor->wHubCharacteristics);
+
+ /* Enable power on each port. Some hubs have reserved values
+ * of LPSM (> 2) in their descriptors, even though they are
+ * USB 2.0 hubs. Some hubs do not implement port-power switching
+ * but only emulate it. In all cases, the ports won't work
+ * unless we send these messages to the hub.
+ */
+ if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2)
dev_dbg(hub->intfdev, "enabling power on all ports\n");
- for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
- set_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_POWER);
- }
+ else
+ dev_dbg(hub->intfdev, "trying to enable port power on "
+ "non-switchable hub\n");
+ for (port1 = 1; port1 <= hub->descriptor->bNbrPorts; port1++)
+ set_port_feature(hub->hdev, port1, USB_PORT_FEAT_POWER);
/* Wait at least 100 msec for power to become stable */
msleep(max(pgood_delay, (unsigned) 100));
}
-static inline void __hub_quiesce(struct usb_hub *hub)
+static void hub_quiesce(struct usb_hub *hub)
{
/* (nonblocking) khubd and related activity won't re-trigger */
hub->quiescing = 1;
hub->activating = 0;
- hub->resume_root_hub = 0;
-}
-static void hub_quiesce(struct usb_hub *hub)
-{
/* (blocking) stop khubd and related activity */
- __hub_quiesce(hub);
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
hub->quiescing = 0;
hub->activating = 1;
- hub->resume_root_hub = 0;
+
status = usb_submit_urb(hub->urb, GFP_NOIO);
if (status < 0)
dev_err(hub->intfdev, "activate --> %d\n", status);
{
int ret;
+ mutex_lock(&hub->status_mutex);
ret = get_hub_status(hub->hdev, &hub->status->hub);
if (ret < 0)
dev_err (hub->intfdev,
*change = le16_to_cpu(hub->status->hub.wHubChange);
ret = 0;
}
+ mutex_unlock(&hub->status_mutex);
return ret;
}
static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
{
struct usb_device *hdev = hub->hdev;
- int ret;
+ int ret = 0;
- if (hdev->children[port1-1] && set_state) {
+ if (hdev->children[port1-1] && set_state)
usb_set_device_state(hdev->children[port1-1],
USB_STATE_NOTATTACHED);
- }
- ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
+ if (!hub->error)
+ ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE);
if (ret)
dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n",
- port1, ret);
-
+ port1, ret);
return ret;
}
+/*
+ * Disable a port and mark a logical connnect-change event, so that some
+ * time later khubd will disconnect() any existing usb_device on the port
+ * and will re-enumerate if there actually is a device attached.
+ */
+static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
+{
+ dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
+ hub_port_disable(hub, port1, 1);
+
+ /* FIXME let caller ask to power down the port:
+ * - some devices won't enumerate without a VBUS power cycle
+ * - SRP saves power that way
+ * - ... new call, TBD ...
+ * That's easy if this hub can switch power per-port, and
+ * khubd reactivates the port later (timer, SRP, etc).
+ * Powerdown must be optional, because of reset/DFU.
+ */
+
+ set_bit(port1, hub->change_bits);
+ kick_khubd(hub);
+}
/* caller has locked the hub device */
-static void hub_pre_reset(struct usb_hub *hub, int disable_ports)
+static int hub_pre_reset(struct usb_interface *intf)
{
+ struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = hub->hdev;
- int port1;
+ int i;
- for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
- if (hdev->children[port1 - 1]) {
- usb_disconnect(&hdev->children[port1 - 1]);
- if (disable_ports)
- hub_port_disable(hub, port1, 0);
- }
+ /* Disconnect all the children */
+ for (i = 0; i < hdev->maxchild; ++i) {
+ if (hdev->children[i])
+ usb_disconnect(&hdev->children[i]);
}
hub_quiesce(hub);
+ return 0;
}
/* caller has locked the hub device */
-static void hub_post_reset(struct usb_hub *hub)
+static int hub_post_reset(struct usb_interface *intf)
{
- hub_activate(hub);
+ struct usb_hub *hub = usb_get_intfdata(intf);
+
hub_power_on(hub);
+ hub_activate(hub);
+ return 0;
}
-
static int hub_configure(struct usb_hub *hub,
struct usb_endpoint_descriptor *endpoint)
{
ret = -ENOMEM;
goto fail;
}
+ mutex_init(&hub->status_mutex);
hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent, hub);
+ INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
dev_dbg(hub_dev, "%sover-current condition exists\n",
(hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
- /* set up the interrupt endpoint */
+ /* set up the interrupt endpoint
+ * We use the EP's maxpacket size instead of (PORTS+1+7)/8
+ * bytes as USB2.0[11.12.3] says because some hubs are known
+ * to send more data (and thus cause overflow). For root hubs,
+ * maxpktsize is defined in hcd.c's fake endpoint descriptors
+ * to be big enough for at least USB_MAXCHILDREN ports. */
pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
return ret;
}
+static void hub_release(struct kref *kref)
+{
+ struct usb_hub *hub = container_of(kref, struct usb_hub, kref);
+
+ usb_put_intf(to_usb_interface(hub->intfdev));
+ kfree(hub);
+}
+
static unsigned highspeed_hubs;
static void hub_disconnect(struct usb_interface *intf)
{
struct usb_hub *hub = usb_get_intfdata (intf);
- struct usb_device *hdev;
-
- usb_set_intfdata (intf, NULL);
- hdev = hub->hdev;
- if (hdev->speed == USB_SPEED_HIGH)
- highspeed_hubs--;
+ /* Take the hub off the event list and don't let it be added again */
+ spin_lock_irq(&hub_event_lock);
+ list_del_init(&hub->event_list);
+ hub->disconnected = 1;
+ spin_unlock_irq(&hub_event_lock);
/* Disconnect all children and quiesce the hub */
- hub_pre_reset(hub, 1);
+ hub->error = 0;
+ hub_pre_reset(intf);
- usb_free_urb(hub->urb);
- hub->urb = NULL;
+ usb_set_intfdata (intf, NULL);
- spin_lock_irq(&hub_event_lock);
- list_del_init(&hub->event_list);
- spin_unlock_irq(&hub_event_lock);
+ if (hub->hdev->speed == USB_SPEED_HIGH)
+ highspeed_hubs--;
+ usb_free_urb(hub->urb);
kfree(hub->descriptor);
- hub->descriptor = NULL;
-
kfree(hub->status);
- hub->status = NULL;
-
- if (hub->buffer) {
- usb_buffer_free(hdev, sizeof(*hub->buffer), hub->buffer,
- hub->buffer_dma);
- hub->buffer = NULL;
- }
+ usb_buffer_free(hub->hdev, sizeof(*hub->buffer), hub->buffer,
+ hub->buffer_dma);
- kfree(hub);
+ kref_put(&hub->kref, hub_release);
}
static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
desc = intf->cur_altsetting;
hdev = interface_to_usbdev(intf);
+#ifdef CONFIG_USB_OTG_BLACKLIST_HUB
+ if (hdev->parent) {
+ dev_warn(&intf->dev, "ignoring external hub\n");
+ return -ENODEV;
+ }
+#endif
+
/* Some hubs have a subclass of 1, which AFAICT according to the */
/* specs is not defined, but it works */
if ((desc->desc.bInterfaceSubClass != 0) &&
endpoint = &desc->endpoint[0].desc;
- /* Output endpoint? Curiouser and curiouser.. */
- if (!(endpoint->bEndpointAddress & USB_DIR_IN))
- goto descriptor_error;
-
- /* If it's not an interrupt endpoint, we'd better punt! */
- if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- != USB_ENDPOINT_XFER_INT)
+ /* If it's not an interrupt in endpoint, we'd better punt! */
+ if (!usb_endpoint_is_int_in(endpoint))
goto descriptor_error;
/* We found a hub */
return -ENOMEM;
}
+ kref_init(&hub->kref);
INIT_LIST_HEAD(&hub->event_list);
hub->intfdev = &intf->dev;
hub->hdev = hdev;
- INIT_WORK(&hub->leds, led_work, hub);
+ INIT_DELAYED_WORK(&hub->leds, led_work);
+ usb_get_intf(intf);
usb_set_intfdata (intf, hub);
+ intf->needs_remote_wakeup = 1;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs++;
}
-/* grab device/port lock, returning index of that port (zero based).
- * protects the upstream link used by this device from concurrent
- * tree operations like suspend, resume, reset, and disconnect, which
- * apply to everything downstream of a given port.
- */
-static int locktree(struct usb_device *udev)
-{
- int t;
- struct usb_device *hdev;
-
- if (!udev)
- return -ENODEV;
-
- /* root hub is always the first lock in the series */
- hdev = udev->parent;
- if (!hdev) {
- usb_lock_device(udev);
- return 0;
- }
-
- /* on the path from root to us, lock everything from
- * top down, dropping parent locks when not needed
- */
- t = locktree(hdev);
- if (t < 0)
- return t;
-
- /* everything is fail-fast once disconnect
- * processing starts
- */
- if (udev->state == USB_STATE_NOTATTACHED) {
- usb_unlock_device(hdev);
- return -ENODEV;
- }
-
- /* when everyone grabs locks top->bottom,
- * non-overlapping work may be concurrent
- */
- usb_lock_device(udev);
- usb_unlock_device(hdev);
- return udev->portnum;
-}
-
static void recursively_mark_NOTATTACHED(struct usb_device *udev)
{
int i;
if (udev->children[i])
recursively_mark_NOTATTACHED(udev->children[i]);
}
+ if (udev->state == USB_STATE_SUSPENDED)
+ udev->discon_suspended = 1;
udev->state = USB_STATE_NOTATTACHED;
}
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
else if (new_state != USB_STATE_NOTATTACHED) {
- udev->state = new_state;
/* root hub wakeup capabilities are managed out-of-band
* and may involve silicon errata ... ignore them here.
*/
if (udev->parent) {
- if (new_state == USB_STATE_CONFIGURED)
+ if (udev->state == USB_STATE_SUSPENDED
+ || new_state == USB_STATE_SUSPENDED)
+ ; /* No change to wakeup settings */
+ else if (new_state == USB_STATE_CONFIGURED)
device_init_wakeup(&udev->dev,
(udev->actconfig->desc.bmAttributes
& USB_CONFIG_ATT_WAKEUP));
- else if (new_state != USB_STATE_SUSPENDED)
+ else
device_init_wakeup(&udev->dev, 0);
}
+ udev->state = new_state;
} else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
-EXPORT_SYMBOL(usb_set_device_state);
-
-
-#ifdef CONFIG_PM
-
-/**
- * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
- * @rhdev: struct usb_device for the root hub
- *
- * The USB host controller driver calls this function when its root hub
- * is resumed and Vbus power has been interrupted or the controller
- * has been reset. The routine marks all the children of the root hub
- * as NOTATTACHED and marks logical connect-change events on their ports.
- */
-void usb_root_hub_lost_power(struct usb_device *rhdev)
-{
- struct usb_hub *hub;
- int port1;
- unsigned long flags;
-
- dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
- spin_lock_irqsave(&device_state_lock, flags);
- hub = hdev_to_hub(rhdev);
- for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
- if (rhdev->children[port1 - 1]) {
- recursively_mark_NOTATTACHED(
- rhdev->children[port1 - 1]);
- set_bit(port1, hub->change_bits);
- }
- }
- spin_unlock_irqrestore(&device_state_lock, flags);
-}
-EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
-
-#endif
static void choose_address(struct usb_device *udev)
{
}
}
+#ifdef CONFIG_USB_SUSPEND
+
+static void usb_stop_pm(struct usb_device *udev)
+{
+ /* Synchronize with the ksuspend thread to prevent any more
+ * autosuspend requests from being submitted, and decrement
+ * the parent's count of unsuspended children.
+ */
+ usb_pm_lock(udev);
+ if (udev->parent && !udev->discon_suspended)
+ usb_autosuspend_device(udev->parent);
+ usb_pm_unlock(udev);
+
+ /* Stop any autosuspend requests already submitted */
+ cancel_rearming_delayed_work(&udev->autosuspend);
+}
+
+#else
+
+static inline void usb_stop_pm(struct usb_device *udev)
+{ }
+
+#endif
+
/**
* usb_disconnect - disconnect a device (usbcore-internal)
* @pdev: pointer to device being disconnected
* cleaning up all state associated with the current configuration
* so that the hardware is now fully quiesced.
*/
+ dev_dbg (&udev->dev, "unregistering device\n");
usb_disable_device(udev, 0);
- usb_notify_remove_device(udev);
+ usb_unlock_device(udev);
+
+ /* Unregister the device. The device driver is responsible
+ * for removing the device files from usbfs and sysfs and for
+ * de-configuring the device.
+ */
+ device_del(&udev->dev);
- /* Free the device number, remove the /proc/bus/usb entry and
- * the sysfs attributes, and delete the parent's children[]
+ /* Free the device number and delete the parent's children[]
* (or root_hub) pointer.
*/
- dev_dbg (&udev->dev, "unregistering device\n");
release_address(udev);
- usb_remove_sysfs_dev_files(udev);
/* Avoid races with recursively_mark_NOTATTACHED() */
spin_lock_irq(&device_state_lock);
*pdev = NULL;
spin_unlock_irq(&device_state_lock);
- usb_unlock_device(udev);
-
- device_unregister(&udev->dev);
-}
-
-static inline const char *plural(int n)
-{
- return (n == 1 ? "" : "s");
-}
-
-static int choose_configuration(struct usb_device *udev)
-{
- int i;
- u16 devstatus;
- int bus_powered;
- int num_configs;
- struct usb_host_config *c, *best;
-
- /* If this fails, assume the device is bus-powered */
- devstatus = 0;
- usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
- le16_to_cpus(&devstatus);
- bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
- dev_dbg(&udev->dev, "device is %s-powered\n",
- bus_powered ? "bus" : "self");
-
- best = NULL;
- c = udev->config;
- num_configs = udev->descriptor.bNumConfigurations;
- for (i = 0; i < num_configs; (i++, c++)) {
- struct usb_interface_descriptor *desc =
- &c->intf_cache[0]->altsetting->desc;
-
- /*
- * HP's USB bus-powered keyboard has only one configuration
- * and it claims to be self-powered; other devices may have
- * similar errors in their descriptors. If the next test
- * were allowed to execute, such configurations would always
- * be rejected and the devices would not work as expected.
- */
-#if 0
- /* Rule out self-powered configs for a bus-powered device */
- if (bus_powered && (c->desc.bmAttributes &
- USB_CONFIG_ATT_SELFPOWER))
- continue;
-#endif
-
- /*
- * The next test may not be as effective as it should be.
- * Some hubs have errors in their descriptor, claiming
- * to be self-powered when they are really bus-powered.
- * We will overestimate the amount of current such hubs
- * make available for each port.
- *
- * This is a fairly benign sort of failure. It won't
- * cause us to reject configurations that we should have
- * accepted.
- */
-
- /* Rule out configs that draw too much bus current */
- if (c->desc.bMaxPower * 2 > udev->bus_mA)
- continue;
-
- /* If the first config's first interface is COMM/2/0xff
- * (MSFT RNDIS), rule it out unless Linux has host-side
- * RNDIS support. */
- if (i == 0 && desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff) {
-#ifndef CONFIG_USB_NET_RNDIS
- continue;
-#else
- best = c;
-#endif
- }
-
- /* From the remaining configs, choose the first one whose
- * first interface is for a non-vendor-specific class.
- * Reason: Linux is more likely to have a class driver
- * than a vendor-specific driver. */
- else if (udev->descriptor.bDeviceClass !=
- USB_CLASS_VENDOR_SPEC &&
- desc->bInterfaceClass !=
- USB_CLASS_VENDOR_SPEC) {
- best = c;
- break;
- }
+ usb_stop_pm(udev);
- /* If all the remaining configs are vendor-specific,
- * choose the first one. */
- else if (!best)
- best = c;
- }
-
- if (best) {
- i = best->desc.bConfigurationValue;
- dev_info(&udev->dev,
- "configuration #%d chosen from %d choice%s\n",
- i, num_configs, plural(num_configs));
- } else {
- i = -1;
- dev_warn(&udev->dev,
- "no configuration chosen from %d choice%s\n",
- num_configs, plural(num_configs));
- }
- return i;
+ put_device(&udev->dev);
}
#ifdef DEBUG
* udev has already been installed, but udev is not yet visible through
* sysfs or other filesystem code.
*
- * Returns 0 for success (device is configured and listed, with its
- * interfaces, in sysfs); else a negative errno value.
+ * It will return if the device is configured properly or not. Zero if
+ * the interface was registered with the driver core; else a negative
+ * errno value.
*
* This call is synchronous, and may not be used in an interrupt context.
*
int usb_new_device(struct usb_device *udev)
{
int err;
- int c;
+
+ /* Determine quirks */
+ usb_detect_quirks(udev);
err = usb_get_configuration(udev);
if (err < 0) {
USB_DT_OTG, (void **) &desc) == 0) {
if (desc->bmAttributes & USB_OTG_HNP) {
unsigned port1 = udev->portnum;
- struct usb_device *root = udev->parent;
-
+
dev_info(&udev->dev,
"Dual-Role OTG device on %sHNP port\n",
(port1 == bus->otg_port)
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_suspend_device(struct usb_device *,
- int port1);
- err = __usb_suspend_device(udev, udev->bus->otg_port);
+ err = usb_port_suspend(udev);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
- err = -ENODEV;
+ err = -ENOTSUPP;
goto fail;
}
#endif
- /* put device-specific files into sysfs */
- err = device_add (&udev->dev);
+ /* export the usbdev device-node for libusb */
+ udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+
+ /* Register the device. The device driver is responsible
+ * for adding the device files to sysfs and for configuring
+ * the device.
+ */
+ err = device_add(&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
}
- usb_create_sysfs_dev_files (udev);
-
- usb_lock_device(udev);
-
- /* choose and set the configuration. that registers the interfaces
- * with the driver core, and lets usb device drivers bind to them.
- */
- c = choose_configuration(udev);
- if (c >= 0) {
- err = usb_set_configuration(udev, c);
- if (err) {
- dev_err(&udev->dev, "can't set config #%d, error %d\n",
- c, err);
- /* This need not be fatal. The user can try to
- * set other configurations. */
- }
- }
- /* USB device state == configured ... usable */
- usb_notify_add_device(udev);
-
- usb_unlock_device(udev);
+ /* Increment the parent's count of unsuspended children */
+ if (udev->parent)
+ usb_autoresume_device(udev->parent);
- return 0;
+exit:
+ return err;
fail:
usb_set_device_state(udev, USB_STATE_NOTATTACHED);
- return err;
+ goto exit;
}
-
static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
int ret;
+ mutex_lock(&hub->status_mutex);
ret = get_port_status(hub->hdev, port1, &hub->status->port);
- if (ret < 0)
+ if (ret < 4) {
dev_err (hub->intfdev,
"%s failed (err = %d)\n", __FUNCTION__, ret);
- else {
+ if (ret >= 0)
+ ret = -EIO;
+ } else {
*status = le16_to_cpu(hub->status->port.wPortStatus);
*change = le16_to_cpu(hub->status->port.wPortChange);
ret = 0;
}
+ mutex_unlock(&hub->status_mutex);
return ret;
}
+
+/* Returns 1 if @hub is a WUSB root hub, 0 otherwise */
+static unsigned hub_is_wusb(struct usb_hub *hub)
+{
+ struct usb_hcd *hcd;
+ if (hub->hdev->parent != NULL) /* not a root hub? */
+ return 0;
+ hcd = container_of(hub->hdev->bus, struct usb_hcd, self);
+ return hcd->wireless;
+}
+
+
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
if (!(portstatus & USB_PORT_STAT_CONNECTION))
return -ENOTCONN;
- /* bomb out completely if something weird happened */
+ /* bomb out completely if the connection bounced */
if ((portchange & USB_PORT_STAT_C_CONNECTION))
- return -EINVAL;
+ return -ENOTCONN;
/* if we`ve finished resetting, then break out of the loop */
if (!(portstatus & USB_PORT_STAT_RESET) &&
(portstatus & USB_PORT_STAT_ENABLE)) {
- if (portstatus & USB_PORT_STAT_HIGH_SPEED)
+ if (hub_is_wusb(hub))
+ udev->speed = USB_SPEED_VARIABLE;
+ else if (portstatus & USB_PORT_STAT_HIGH_SPEED)
udev->speed = USB_SPEED_HIGH;
else if (portstatus & USB_PORT_STAT_LOW_SPEED)
udev->speed = USB_SPEED_LOW;
return status;
}
-/*
- * Disable a port and mark a logical connnect-change event, so that some
- * time later khubd will disconnect() any existing usb_device on the port
- * and will re-enumerate if there actually is a device attached.
- */
-static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
-{
- dev_dbg(hub->intfdev, "logical disconnect on port %d\n", port1);
- hub_port_disable(hub, port1, 1);
-
- /* FIXME let caller ask to power down the port:
- * - some devices won't enumerate without a VBUS power cycle
- * - SRP saves power that way
- * - ... new call, TBD ...
- * That's easy if this hub can switch power per-port, and
- * khubd reactivates the port later (timer, SRP, etc).
- * Powerdown must be optional, because of reset/DFU.
- */
-
- set_bit(port1, hub->change_bits);
- kick_khubd(hub);
-}
-
+#ifdef CONFIG_PM
#ifdef CONFIG_USB_SUSPEND
/*
+ * usb_port_suspend - suspend a usb device's upstream port
+ * @udev: device that's no longer in active use, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * Suspends a USB device that isn't in active use, conserving power.
+ * Devices may wake out of a suspend, if anything important happens,
+ * using the remote wakeup mechanism. They may also be taken out of
+ * suspend by the host, using usb_port_resume(). It's also routine
+ * to disconnect devices while they are suspended.
+ *
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
* Selective port suspend reduces power; most suspended devices draw
* less than 500 uA. It's also used in OTG, along with remote wakeup.
* All devices below the suspended port are also suspended.
* also support "remote wakeup", where the device can activate the USB
* tree above them to deliver data, such as a keypress or packet. In
* some cases, this wakes the USB host.
- */
-static int hub_port_suspend(struct usb_hub *hub, int port1,
- struct usb_device *udev)
-{
- int status;
-
- // dev_dbg(hub->intfdev, "suspend port %d\n", port1);
-
- /* enable remote wakeup when appropriate; this lets the device
- * wake up the upstream hub (including maybe the root hub).
- *
- * NOTE: OTG devices may issue remote wakeup (or SRP) even when
- * we don't explicitly enable it here.
- */
- if (device_may_wakeup(&udev->dev)) {
- status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- if (status)
- dev_dbg(&udev->dev,
- "won't remote wakeup, status %d\n",
- status);
- }
-
- /* see 7.1.7.6 */
- status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
- if (status) {
- dev_dbg(hub->intfdev,
- "can't suspend port %d, status %d\n",
- port1, status);
- /* paranoia: "should not happen" */
- (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
- USB_DEVICE_REMOTE_WAKEUP, 0,
- NULL, 0,
- USB_CTRL_SET_TIMEOUT);
- } else {
- /* device has up to 10 msec to fully suspend */
- dev_dbg(&udev->dev, "usb suspend\n");
- usb_set_device_state(udev, USB_STATE_SUSPENDED);
- msleep(10);
- }
- return status;
-}
-
-/*
+ *
+ * Suspending OTG devices may trigger HNP, if that's been enabled
+ * between a pair of dual-role devices. That will change roles, such
+ * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
+ *
* Devices on USB hub ports have only one "suspend" state, corresponding
* to ACPI D2, "may cause the device to lose some context".
* State transitions include:
* If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
* the root hub for their bus goes into global suspend ... so we don't
* (falsely) update the device power state to say it suspended.
+ *
+ * Returns 0 on success, else negative errno.
*/
-static int __usb_suspend_device (struct usb_device *udev, int port1)
+int usb_port_suspend(struct usb_device *udev)
{
- int status = 0;
+ struct usb_hub *hub = hdev_to_hub(udev->parent);
+ int port1 = udev->portnum;
+ int status;
- /* caller owns the udev device lock */
- if (port1 < 0)
- return port1;
+ // dev_dbg(hub->intfdev, "suspend port %d\n", port1);
- if (udev->state == USB_STATE_SUSPENDED
- || udev->state == USB_STATE_NOTATTACHED) {
- return 0;
+ /* enable remote wakeup when appropriate; this lets the device
+ * wake up the upstream hub (including maybe the root hub).
+ *
+ * NOTE: OTG devices may issue remote wakeup (or SRP) even when
+ * we don't explicitly enable it here.
+ */
+ if (udev->do_remote_wakeup) {
+ status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (status)
+ dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
+ status);
}
- /* all interfaces must already be suspended */
- if (udev->actconfig) {
- int i;
-
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
-
- intf = udev->actconfig->interface[i];
- if (is_active(intf)) {
- dev_dbg(&intf->dev, "nyet suspended\n");
- return -EBUSY;
- }
- }
+ /* see 7.1.7.6 */
+ status = set_port_feature(hub->hdev, port1, USB_PORT_FEAT_SUSPEND);
+ if (status) {
+ dev_dbg(hub->intfdev, "can't suspend port %d, status %d\n",
+ port1, status);
+ /* paranoia: "should not happen" */
+ (void) usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ USB_REQ_CLEAR_FEATURE, USB_RECIP_DEVICE,
+ USB_DEVICE_REMOTE_WAKEUP, 0,
+ NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ } else {
+ /* device has up to 10 msec to fully suspend */
+ dev_dbg(&udev->dev, "usb %ssuspend\n",
+ udev->auto_pm ? "auto-" : "");
+ usb_set_device_state(udev, USB_STATE_SUSPENDED);
+ msleep(10);
}
-
- /* we only change a device's upstream USB link.
- * root hubs have no upstream USB link.
- */
- if (udev->parent)
- status = hub_port_suspend(hdev_to_hub(udev->parent), port1,
- udev);
-
- if (status == 0)
- udev->dev.power.power_state = PMSG_SUSPEND;
return status;
}
-#endif
-
-/*
- * usb_suspend_device - suspend a usb device
- * @udev: device that's no longer in active use
- * Context: must be able to sleep; device not locked; pm locks held
- *
- * Suspends a USB device that isn't in active use, conserving power.
- * Devices may wake out of a suspend, if anything important happens,
- * using the remote wakeup mechanism. They may also be taken out of
- * suspend by the host, using usb_resume_device(). It's also routine
- * to disconnect devices while they are suspended.
- *
- * This only affects the USB hardware for a device; its interfaces
- * (and, for hubs, child devices) must already have been suspended.
- *
- * Suspending OTG devices may trigger HNP, if that's been enabled
- * between a pair of dual-role devices. That will change roles, such
- * as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
- *
- * Returns 0 on success, else negative errno.
- */
-int usb_suspend_device(struct usb_device *udev)
-{
-#ifdef CONFIG_USB_SUSPEND
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
- return __usb_suspend_device(udev, udev->portnum);
-#else
- /* NOTE: udev->state unchanged, it's not lying ... */
- udev->dev.power.power_state = PMSG_SUSPEND;
- return 0;
-#endif
-}
-
/*
* If the USB "suspend" state is in use (rather than "global suspend"),
* many devices will be individually taken out of suspend state using
- * special" resume" signaling. These routines kick in shortly after
+ * special "resume" signaling. This routine kicks in shortly after
* hardware resume signaling is finished, either because of selective
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
+ *
+ * If @udev->reset_resume is set then the device is reset before the
+ * status check is done.
*/
-static int finish_device_resume(struct usb_device *udev)
+static int finish_port_resume(struct usb_device *udev)
{
- int status;
+ int status = 0;
u16 devstatus;
/* caller owns the udev device lock */
- dev_dbg(&udev->dev, "finish resume\n");
+ dev_dbg(&udev->dev, "finish %sresume\n",
+ udev->reset_resume ? "reset-" : "");
/* usb ch9 identifies four variants of SUSPENDED, based on what
* state the device resumes to. Linux currently won't see the
usb_set_device_state(udev, udev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
- udev->dev.power.power_state = PMSG_ON;
+
+ /* 10.5.4.5 says not to reset a suspended port if the attached
+ * device is enabled for remote wakeup. Hence the reset
+ * operation is carried out here, after the port has been
+ * resumed.
+ */
+ if (udev->reset_resume)
+ status = usb_reset_device(udev);
/* 10.5.4.5 says be sure devices in the tree are still there.
* For now let's assume the device didn't go crazy on resume,
* and device drivers will know about any resume quirks.
*/
- status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
- if (status < 2)
- dev_dbg(&udev->dev,
- "gone after usb resume? status %d\n",
- status);
- else if (udev->actconfig) {
- unsigned i;
- int (*resume)(struct device *);
+ if (status == 0) {
+ status = usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
+ if (status >= 0)
+ status = (status == 2 ? 0 : -ENODEV);
+ }
+ if (status) {
+ dev_dbg(&udev->dev, "gone after usb resume? status %d\n",
+ status);
+ } else if (udev->actconfig) {
le16_to_cpus(&devstatus);
- if ((devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP))
- && udev->parent) {
+ if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
status = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
USB_REQ_CLEAR_FEATURE,
USB_DEVICE_REMOTE_WAKEUP, 0,
NULL, 0,
USB_CTRL_SET_TIMEOUT);
- if (status) {
+ if (status)
dev_dbg(&udev->dev, "disable remote "
"wakeup, status %d\n", status);
- status = 0;
- }
- }
-
- /* resume interface drivers; if this is a hub, it
- * may have a child resume event to deal with soon
- */
- resume = udev->dev.bus->resume;
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct device *dev =
- &udev->actconfig->interface[i]->dev;
-
- down(&dev->sem);
- (void) resume(dev);
- up(&dev->sem);
}
status = 0;
-
- } else if (udev->devnum <= 0) {
- dev_dbg(&udev->dev, "bogus resume!\n");
- status = -EINVAL;
}
return status;
}
-#ifdef CONFIG_USB_SUSPEND
-
-static int
-hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
+/*
+ * usb_port_resume - re-activate a suspended usb device's upstream port
+ * @udev: device to re-activate, not a root hub
+ * Context: must be able to sleep; device not locked; pm locks held
+ *
+ * This will re-activate the suspended device, increasing power usage
+ * while letting drivers communicate again with its endpoints.
+ * USB resume explicitly guarantees that the power session between
+ * the host and the device is the same as it was when the device
+ * suspended.
+ *
+ * If CONFIG_USB_PERSIST and @udev->reset_resume are both set then this
+ * routine won't check that the port is still enabled. Furthermore,
+ * if @udev->reset_resume is set then finish_port_resume() above will
+ * reset @udev. The end result is that a broken power session can be
+ * recovered and @udev will appear to persist across a loss of VBUS power.
+ *
+ * For example, if a host controller doesn't maintain VBUS suspend current
+ * during a system sleep or is reset when the system wakes up, all the USB
+ * power sessions below it will be broken. This is especially troublesome
+ * for mass-storage devices containing mounted filesystems, since the
+ * device will appear to have disconnected and all the memory mappings
+ * to it will be lost. Using the USB_PERSIST facility, the device can be
+ * made to appear as if it had not disconnected.
+ *
+ * This facility is inherently dangerous. Although usb_reset_device()
+ * makes every effort to insure that the same device is present after the
+ * reset as before, it cannot provide a 100% guarantee. Furthermore it's
+ * quite possible for a device to remain unaltered but its media to be
+ * changed. If the user replaces a flash memory card while the system is
+ * asleep, he will have only himself to blame when the filesystem on the
+ * new card is corrupted and the system crashes.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int usb_port_resume(struct usb_device *udev)
{
- int status;
+ struct usb_hub *hub = hdev_to_hub(udev->parent);
+ int port1 = udev->portnum;
+ int status;
+ u16 portchange, portstatus;
+ unsigned mask_flags, want_flags;
+
+ /* Skip the initial Clear-Suspend step for a remote wakeup */
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+ if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+ goto SuspendCleared;
// dev_dbg(hub->intfdev, "resume port %d\n", port1);
+ set_bit(port1, hub->busy_bits);
+
/* see 7.1.7.7; affects power usage, but not budgeting */
status = clear_port_feature(hub->hdev,
port1, USB_PORT_FEAT_SUSPEND);
if (status) {
- dev_dbg(hub->intfdev,
- "can't resume port %d, status %d\n",
- port1, status);
+ dev_dbg(hub->intfdev, "can't resume port %d, status %d\n",
+ port1, status);
} else {
- u16 devstatus;
- u16 portchange;
-
/* drive resume for at least 20 msec */
- if (udev)
- dev_dbg(&udev->dev, "RESUME\n");
+ dev_dbg(&udev->dev, "usb %sresume\n",
+ udev->auto_pm ? "auto-" : "");
msleep(25);
-#define LIVE_FLAGS ( USB_PORT_STAT_POWER \
- | USB_PORT_STAT_ENABLE \
- | USB_PORT_STAT_CONNECTION)
-
/* Virtual root hubs can trigger on GET_PORT_STATUS to
* stop resume signaling. Then finish the resume
* sequence.
*/
- devstatus = portchange = 0;
- status = hub_port_status(hub, port1,
- &devstatus, &portchange);
- if (status < 0
- || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
- || (devstatus & USB_PORT_STAT_SUSPEND) != 0
- ) {
+ status = hub_port_status(hub, port1, &portstatus, &portchange);
+
+ SuspendCleared:
+ if (USB_PERSIST && udev->reset_resume)
+ want_flags = USB_PORT_STAT_POWER
+ | USB_PORT_STAT_CONNECTION;
+ else
+ want_flags = USB_PORT_STAT_POWER
+ | USB_PORT_STAT_CONNECTION
+ | USB_PORT_STAT_ENABLE;
+ mask_flags = want_flags | USB_PORT_STAT_SUSPEND;
+
+ if (status < 0 || (portstatus & mask_flags) != want_flags) {
dev_dbg(hub->intfdev,
"port %d status %04x.%04x after resume, %d\n",
- port1, portchange, devstatus, status);
+ port1, portchange, portstatus, status);
+ if (status >= 0)
+ status = -ENODEV;
} else {
+ if (portchange & USB_PORT_STAT_C_SUSPEND)
+ clear_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_C_SUSPEND);
/* TRSMRCY = 10 msec */
msleep(10);
- if (udev)
- status = finish_device_resume(udev);
}
}
- if (status < 0)
- hub_port_logical_disconnect(hub, port1);
-
- return status;
-}
-
-#endif
-
-/*
- * usb_resume_device - re-activate a suspended usb device
- * @udev: device to re-activate
- * Context: must be able to sleep; device not locked; pm locks held
- *
- * This will re-activate the suspended device, increasing power usage
- * while letting drivers communicate again with its endpoints.
- * USB resume explicitly guarantees that the power session between
- * the host and the device is the same as it was when the device
- * suspended.
- *
- * Returns 0 on success, else negative errno.
- */
-int usb_resume_device(struct usb_device *udev)
-{
- int status;
-
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
- /* selective resume of one downstream hub-to-device port */
- if (udev->parent) {
-#ifdef CONFIG_USB_SUSPEND
- if (udev->state == USB_STATE_SUSPENDED) {
- // NOTE swsusp may bork us, device state being wrong...
- // NOTE this fails if parent is also suspended...
- status = hub_port_resume(hdev_to_hub(udev->parent),
- udev->portnum, udev);
- } else
-#endif
- status = 0;
- } else
- status = finish_device_resume(udev);
- if (status < 0)
- dev_dbg(&udev->dev, "can't resume, status %d\n",
- status);
+ clear_bit(port1, hub->busy_bits);
+ if (!hub->hdev->parent && !hub->busy_bits[0])
+ usb_enable_root_hub_irq(hub->hdev->bus);
- /* rebind drivers that had no suspend() */
- if (status == 0) {
- usb_unlock_device(udev);
- bus_rescan_devices(&usb_bus_type);
- usb_lock_device(udev);
+ if (status == 0)
+ status = finish_port_resume(udev);
+ if (status < 0) {
+ dev_dbg(&udev->dev, "can't resume, status %d\n", status);
+ hub_port_logical_disconnect(hub, port1);
}
return status;
}
{
int status = 0;
-#ifdef CONFIG_USB_SUSPEND
-
- /* don't repeat RESUME sequence if this device
- * was already woken up by some other task
- */
usb_lock_device(udev);
if (udev->state == USB_STATE_SUSPENDED) {
- dev_dbg(&udev->dev, "RESUME (wakeup)\n");
- /* TRSMRCY = 10 msec */
- msleep(10);
- status = finish_device_resume(udev);
+ dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
+ usb_mark_last_busy(udev);
+ status = usb_external_resume_device(udev);
}
usb_unlock_device(udev);
-#endif
return status;
}
+#else /* CONFIG_USB_SUSPEND */
+
+/* When CONFIG_USB_SUSPEND isn't set, we never suspend or resume any ports. */
+
+int usb_port_suspend(struct usb_device *udev)
+{
+ return 0;
+}
+
+int usb_port_resume(struct usb_device *udev)
+{
+ int status = 0;
+
+ /* However we may need to do a reset-resume */
+ if (udev->reset_resume) {
+ dev_dbg(&udev->dev, "reset-resume\n");
+ status = usb_reset_device(udev);
+ }
+ return status;
+}
+
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
+}
+
+#endif
+
static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (udev && (udev->dev.power.power_state.event
- == PM_EVENT_ON
+ if (udev && msg.event == PM_EVENT_SUSPEND &&
#ifdef CONFIG_USB_SUSPEND
- || udev->state != USB_STATE_SUSPENDED
+ udev->state != USB_STATE_SUSPENDED
+#else
+ udev->dev.power.power_state.event
+ == PM_EVENT_ON
#endif
- )) {
- dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ ) {
+ if (!hdev->auto_pm)
+ dev_dbg(&intf->dev, "port %d nyet suspended\n",
+ port1);
return -EBUSY;
}
}
- /* "global suspend" of the downstream HC-to-USB interface */
- if (!hdev->parent) {
- struct usb_bus *bus = hdev->bus;
- if (bus) {
- int status = hcd_bus_suspend (bus);
-
- if (status != 0) {
- dev_dbg(&hdev->dev, "'global' suspend %d\n",
- status);
- return status;
- }
- } else
- return -EOPNOTSUPP;
- }
+ dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
/* stop khubd and related activity */
hub_quiesce(hub);
static int hub_resume(struct usb_interface *intf)
{
- struct usb_device *hdev = interface_to_usbdev(intf);
struct usb_hub *hub = usb_get_intfdata (intf);
- int status;
- /* "global resume" of the downstream HC-to-USB interface */
- if (!hdev->parent) {
- struct usb_bus *bus = hdev->bus;
- if (bus) {
- status = hcd_bus_resume (bus);
- if (status) {
- dev_dbg(&intf->dev, "'global' resume %d\n",
- status);
- return status;
- }
- } else
- return -EOPNOTSUPP;
- if (status == 0) {
- /* TRSMRCY = 10 msec */
- msleep(10);
- }
- }
+ dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+ /* tell khubd to look for changes on this hub */
hub_activate(hub);
+ return 0;
+}
- /* REVISIT: this recursion probably shouldn't exist. Remove
- * this code sometime, after retesting with different root and
- * external hubs.
- */
-#ifdef CONFIG_USB_SUSPEND
- {
- unsigned port1;
+static int hub_reset_resume(struct usb_interface *intf)
+{
+ struct usb_hub *hub = usb_get_intfdata(intf);
+ struct usb_device *hdev = hub->hdev;
+ int port1;
- for (port1 = 1; port1 <= hdev->maxchild; port1++) {
- struct usb_device *udev;
- u16 portstat, portchange;
+ hub_power_on(hub);
- udev = hdev->children [port1-1];
- status = hub_port_status(hub, port1, &portstat, &portchange);
- if (status == 0) {
- if (portchange & USB_PORT_STAT_C_SUSPEND) {
- clear_port_feature(hdev, port1,
- USB_PORT_FEAT_C_SUSPEND);
- portchange &= ~USB_PORT_STAT_C_SUSPEND;
- }
+ for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
+ struct usb_device *child = hdev->children[port1-1];
- /* let khubd handle disconnects etc */
- if (portchange)
- continue;
- }
+ if (child) {
- if (!udev || status < 0)
- continue;
- usb_lock_device(udev);
- if (portstat & USB_PORT_STAT_SUSPEND)
- status = hub_port_resume(hub, port1, udev);
- else {
- status = finish_device_resume(udev);
- if (status < 0) {
- dev_dbg(&intf->dev, "resume port %d --> %d\n",
- port1, status);
+ /* For "USB_PERSIST"-enabled children we must
+ * mark the child device for reset-resume and
+ * turn off the connect-change status to prevent
+ * khubd from disconnecting it later.
+ */
+ if (USB_PERSIST && child->persist_enabled) {
+ child->reset_resume = 1;
+ clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_CONNECTION);
+
+ /* Otherwise we must disconnect the child,
+ * but as we may not lock the child device here
+ * we have to do a "logical" disconnect.
+ */
+ } else {
hub_port_logical_disconnect(hub, port1);
}
}
- usb_unlock_device(udev);
- }
}
-#endif
+
+ hub_activate(hub);
return 0;
}
-void usb_suspend_root_hub(struct usb_device *hdev)
+/**
+ * usb_root_hub_lost_power - called by HCD if the root hub lost Vbus power
+ * @rhdev: struct usb_device for the root hub
+ *
+ * The USB host controller driver calls this function when its root hub
+ * is resumed and Vbus power has been interrupted or the controller
+ * has been reset. The routine marks @rhdev as having lost power. When
+ * the hub driver is resumed it will take notice; if CONFIG_USB_PERSIST
+ * is enabled then it will carry out power-session recovery, otherwise
+ * it will disconnect all the child devices.
+ */
+void usb_root_hub_lost_power(struct usb_device *rhdev)
{
- struct usb_hub *hub = hdev_to_hub(hdev);
-
- /* This also makes any led blinker stop retriggering. We're called
- * from irq, so the blinker might still be scheduled. Caller promises
- * that the root hub status URB will be canceled.
- */
- __hub_quiesce(hub);
- mark_quiesced(to_usb_interface(hub->intfdev));
+ dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
+ rhdev->reset_resume = 1;
}
+EXPORT_SYMBOL_GPL(usb_root_hub_lost_power);
-void usb_resume_root_hub(struct usb_device *hdev)
-{
- struct usb_hub *hub = hdev_to_hub(hdev);
+#else /* CONFIG_PM */
- hub->resume_root_hub = 1;
- kick_khubd(hub);
+static inline int remote_wakeup(struct usb_device *udev)
+{
+ return 0;
}
+#define hub_suspend NULL
+#define hub_resume NULL
+#define hub_reset_resume NULL
+#endif
+
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
int i, j, retval;
unsigned delay = HUB_SHORT_RESET_TIME;
enum usb_device_speed oldspeed = udev->speed;
+ char *speed, *type;
/* root hub ports have a slightly longer reset period
* (from USB 2.0 spec, section 7.1.7.5)
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
+ * For Wireless USB devices, ep0 max packet is always 512 (tho
+ * reported as 0xff in the device descriptor). WUSB1.0[4.8.1].
*/
switch (udev->speed) {
+ case USB_SPEED_VARIABLE: /* fixed at 512 */
+ udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512);
+ break;
case USB_SPEED_HIGH: /* fixed at 64 */
udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64);
break;
goto fail;
}
+ type = "";
+ switch (udev->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ case USB_SPEED_VARIABLE:
+ speed = "variable";
+ type = "Wireless ";
+ break;
+ default: speed = "?"; break;
+ }
dev_info (&udev->dev,
- "%s %s speed USB device using %s and address %d\n",
- (udev->config) ? "reset" : "new",
- ({ char *speed; switch (udev->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- }; speed;}),
- udev->bus->controller->driver->name,
- udev->devnum);
+ "%s %s speed %sUSB device using %s and address %d\n",
+ (udev->config) ? "reset" : "new", speed, type,
+ udev->bus->controller->driver->name, udev->devnum);
/* Set up TT records, if needed */
if (hdev->tt) {
continue;
}
- /* Use a short timeout the first time through,
- * so that recalcitrant full-speed devices with
- * 8- or 16-byte ep0-maxpackets won't slow things
- * down tremendously by NAKing the unexpectedly
- * early status stage. Also, retry on all errors;
- * some devices are flakey.
+ /* Retry on all errors; some devices are flakey.
+ * 255 is for WUSB devices, we actually need to use
+ * 512 (WUSB1.0[4.8.1]).
*/
for (j = 0; j < 3; ++j) {
buf->bMaxPacketSize0 = 0;
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
- (i ? USB_CTRL_GET_TIMEOUT : 1000));
+ USB_CTRL_GET_TIMEOUT);
switch (buf->bMaxPacketSize0) {
- case 8: case 16: case 32: case 64:
+ case 8: case 16: case 32: case 64: case 255:
if (buf->bDescriptorType ==
USB_DT_DEVICE) {
r = 0;
if (retval)
goto fail;
- i = udev->descriptor.bMaxPacketSize0;
+ i = udev->descriptor.bMaxPacketSize0 == 0xff?
+ 512 : udev->descriptor.bMaxPacketSize0;
if (le16_to_cpu(udev->ep0.desc.wMaxPacketSize) != i) {
if (udev->speed != USB_SPEED_FULL ||
!(i == 8 || i == 16 || i == 32 || i == 64)) {
struct usb_qualifier_descriptor *qual;
int status;
- qual = kmalloc (sizeof *qual, SLAB_KERNEL);
+ qual = kmalloc (sizeof *qual, GFP_KERNEL);
if (qual == NULL)
return;
/* hub LEDs are probably harder to miss than syslog */
if (hub->has_indicators) {
hub->indicator[port1-1] = INDICATOR_GREEN_BLINK;
- schedule_work (&hub->leds);
+ schedule_delayed_work (&hub->leds, 0);
}
}
kfree(qual);
if (portchange & USB_PORT_STAT_C_CONNECTION) {
status = hub_port_debounce(hub, port1);
if (status < 0) {
- dev_err (hub_dev,
- "connect-debounce failed, port %d disabled\n",
- port1);
+ if (printk_ratelimit())
+ dev_err (hub_dev, "connect-debounce failed, "
+ "port %d disabled\n", port1);
goto done;
}
portstatus = status;
return;
}
-#ifdef CONFIG_USB_SUSPEND
- /* If something is connected, but the port is suspended, wake it up. */
- if (portstatus & USB_PORT_STAT_SUSPEND) {
- status = hub_port_resume(hub, port1, NULL);
- if (status < 0) {
- dev_dbg(hub_dev,
- "can't clear suspend on port %d; %d\n",
- port1, status);
- goto done;
- }
- }
-#endif
-
for (i = 0; i < SET_CONFIG_TRIES; i++) {
struct usb_device *udev;
usb_set_device_state(udev, USB_STATE_POWERED);
udev->speed = USB_SPEED_UNKNOWN;
udev->bus_mA = hub->mA_per_port;
+ udev->level = hdev->level + 1;
/* set the address */
choose_address(udev);
if (hub->has_indicators) {
hub->indicator[port1-1] =
INDICATOR_AMBER_BLINK;
- schedule_work (&hub->leds);
+ schedule_delayed_work (&hub->leds, 0);
}
status = -ENOTCONN; /* Don't retry */
goto loop_disable;
ep0_reinit(udev);
release_address(udev);
usb_put_dev(udev);
- if (status == -ENOTCONN)
+ if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
}
list_del_init(tmp);
hub = list_entry(tmp, struct usb_hub, event_list);
- hdev = hub->hdev;
- intf = to_usb_interface(hub->intfdev);
- hub_dev = &intf->dev;
-
- i = hub->resume_root_hub;
+ kref_get(&hub->kref);
+ spin_unlock_irq(&hub_event_lock);
- dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
+ hdev = hub->hdev;
+ hub_dev = hub->intfdev;
+ intf = to_usb_interface(hub_dev);
+ dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
hdev->state, hub->descriptor
? hub->descriptor->bNbrPorts
: 0,
/* NOTE: expects max 15 ports... */
(u16) hub->change_bits[0],
- (u16) hub->event_bits[0],
- i ? ", resume root" : "");
-
- usb_get_intf(intf);
- spin_unlock_irq(&hub_event_lock);
-
- /* Is this is a root hub wanting to reactivate the downstream
- * ports? If so, be sure the interface resumes even if its
- * stub "device" node was never suspended.
- */
- if (i) {
- dpm_runtime_resume(&hdev->dev);
- dpm_runtime_resume(&intf->dev);
- usb_put_intf(intf);
- continue;
- }
+ (u16) hub->event_bits[0]);
/* Lock the device, then check to see if we were
* disconnected while waiting for the lock to succeed. */
- if (locktree(hdev) < 0) {
- usb_put_intf(intf);
- continue;
- }
- if (hub != usb_get_intfdata(intf))
+ usb_lock_device(hdev);
+ if (unlikely(hub->disconnected))
goto loop;
/* If the hub has died, clean up after it */
if (hdev->state == USB_STATE_NOTATTACHED) {
- hub_pre_reset(hub, 0);
+ hub->error = -ENODEV;
+ hub_pre_reset(intf);
goto loop;
}
- /* If this is an inactive or suspended hub, do nothing */
- if (hub->quiescing)
+ /* Autoresume */
+ ret = usb_autopm_get_interface(intf);
+ if (ret) {
+ dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
goto loop;
+ }
+
+ /* If this is an inactive hub, do nothing */
+ if (hub->quiescing)
+ goto loop_autopm;
if (hub->error) {
dev_dbg (hub_dev, "resetting for error %d\n",
hub->error);
- ret = usb_reset_device(hdev);
+ ret = usb_reset_composite_device(hdev, intf);
if (ret) {
dev_dbg (hub_dev,
"error resetting hub: %d\n", ret);
- goto loop;
+ goto loop_autopm;
}
hub->nerrors = 0;
/* If this is a root hub, tell the HCD it's okay to
* re-enable port-change interrupts now. */
- if (!hdev->parent)
+ if (!hdev->parent && !hub->busy_bits[0])
usb_enable_root_hub_irq(hdev->bus);
+loop_autopm:
+ /* Allow autosuspend if we're not going to run again */
+ if (list_empty(&hub->event_list))
+ usb_autopm_enable(intf);
loop:
usb_unlock_device(hdev);
- usb_put_intf(intf);
+ kref_put(&hub->kref, hub_release);
} /* end while (1) */
}
static int hub_thread(void *__unused)
{
+ set_freezable();
do {
hub_events();
wait_event_interruptible(khubd_wait,
.disconnect = hub_disconnect,
.suspend = hub_suspend,
.resume = hub_resume,
+ .reset_resume = hub_reset_resume,
+ .pre_reset = hub_pre_reset,
+ .post_reset = hub_post_reset,
.ioctl = hub_ioctl,
.id_table = hub_id_table,
+ .supports_autosuspend = 1,
};
int usb_hub_init(void)
if (len < le16_to_cpu(udev->config[index].desc.wTotalLength))
len = le16_to_cpu(udev->config[index].desc.wTotalLength);
}
- buf = kmalloc (len, SLAB_KERNEL);
+ buf = kmalloc (len, GFP_KERNEL);
if (buf == NULL) {
dev_err(&udev->dev, "no mem to re-read configs after reset\n");
/* assume the worst */
* usb_reset_device - perform a USB port reset to reinitialize a device
* @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
*
- * WARNING - don't reset any device unless drivers for all of its
- * interfaces are expecting that reset! Maybe some driver->reset()
- * method should eventually help ensure sufficient cooperation.
+ * WARNING - don't use this routine to reset a composite device
+ * (one with multiple interfaces owned by separate drivers)!
+ * Use usb_reset_composite_device() instead.
*
* Do a port reset, reassign the device's address, and establish its
* former operating configuration. If the reset fails, or the device's
* this from a driver probe() routine after downloading new firmware.
* For calls that might not occur during probe(), drivers should lock
* the device using usb_lock_device_for_reset().
+ *
+ * Locking exception: This routine may also be called from within an
+ * autoresume handler. Such usage won't conflict with other tasks
+ * holding the device lock because these tasks should always call
+ * usb_autopm_resume_device(), thereby preventing any unwanted autoresume.
*/
int usb_reset_device(struct usb_device *udev)
{
struct usb_device *parent_hdev = udev->parent;
struct usb_hub *parent_hub;
struct usb_device_descriptor descriptor = udev->descriptor;
- struct usb_hub *hub = NULL;
int i, ret = 0;
int port1 = udev->portnum;
}
parent_hub = hdev_to_hub(parent_hdev);
- /* If we're resetting an active hub, take some special actions */
- if (udev->actconfig &&
- udev->actconfig->interface[0]->dev.driver ==
- &hub_driver.driver &&
- (hub = hdev_to_hub(udev)) != NULL) {
- hub_pre_reset(hub, 0);
- }
-
set_bit(port1, parent_hub->busy_bits);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
* Other endpoints will be handled by re-enumeration. */
ep0_reinit(udev);
ret = hub_port_init(parent_hub, udev, port1, i);
- if (ret >= 0)
+ if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
}
clear_bit(port1, parent_hub->busy_bits);
+ if (!parent_hdev->parent && !parent_hub->busy_bits[0])
+ usb_enable_root_hub_irq(parent_hdev->bus);
+
if (ret < 0)
goto re_enumerate;
}
done:
- if (hub)
- hub_post_reset(hub);
return 0;
re_enumerate:
hub_port_logical_disconnect(parent_hub, port1);
return -ENODEV;
}
+EXPORT_SYMBOL(usb_reset_device);
+
+/**
+ * usb_reset_composite_device - warn interface drivers and perform a USB port reset
+ * @udev: device to reset (not in SUSPENDED or NOTATTACHED state)
+ * @iface: interface bound to the driver making the request (optional)
+ *
+ * Warns all drivers bound to registered interfaces (using their pre_reset
+ * method), performs the port reset, and then lets the drivers know that
+ * the reset is over (using their post_reset method).
+ *
+ * Return value is the same as for usb_reset_device().
+ *
+ * The caller must own the device lock. For example, it's safe to use
+ * this from a driver probe() routine after downloading new firmware.
+ * For calls that might not occur during probe(), drivers should lock
+ * the device using usb_lock_device_for_reset().
+ *
+ * The interface locks are acquired during the pre_reset stage and released
+ * during the post_reset stage. However if iface is not NULL and is
+ * currently being probed, we assume that the caller already owns its
+ * lock.
+ */
+int usb_reset_composite_device(struct usb_device *udev,
+ struct usb_interface *iface)
+{
+ int ret;
+ struct usb_host_config *config = udev->actconfig;
+
+ if (udev->state == USB_STATE_NOTATTACHED ||
+ udev->state == USB_STATE_SUSPENDED) {
+ dev_dbg(&udev->dev, "device reset not allowed in state %d\n",
+ udev->state);
+ return -EINVAL;
+ }
+
+ /* Prevent autosuspend during the reset */
+ usb_autoresume_device(udev);
+
+ if (iface && iface->condition != USB_INTERFACE_BINDING)
+ iface = NULL;
+
+ if (config) {
+ int i;
+ struct usb_interface *cintf;
+ struct usb_driver *drv;
+
+ for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+ cintf = config->interface[i];
+ if (cintf != iface)
+ down(&cintf->dev.sem);
+ if (device_is_registered(&cintf->dev) &&
+ cintf->dev.driver) {
+ drv = to_usb_driver(cintf->dev.driver);
+ if (drv->pre_reset)
+ (drv->pre_reset)(cintf);
+ /* FIXME: Unbind if pre_reset returns an error or isn't defined */
+ }
+ }
+ }
+
+ ret = usb_reset_device(udev);
+
+ if (config) {
+ int i;
+ struct usb_interface *cintf;
+ struct usb_driver *drv;
+
+ for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
+ cintf = config->interface[i];
+ if (device_is_registered(&cintf->dev) &&
+ cintf->dev.driver) {
+ drv = to_usb_driver(cintf->dev.driver);
+ if (drv->post_reset)
+ (drv->post_reset)(cintf);
+ /* FIXME: Unbind if post_reset returns an error or isn't defined */
+ }
+ if (cintf != iface)
+ up(&cintf->dev.sem);
+ }
+ }
+
+ usb_autosuspend_device(udev);
+ return ret;
+}
+EXPORT_SYMBOL(usb_reset_composite_device);