bool bResult = true;
//u8 eRFPath;
u8 i = 0, QueueID = 0;
- ptx_ring head=NULL,tail=NULL;
+ //ptx_ring head=NULL,tail=NULL;
+ struct rtl8192_tx_ring *ring = NULL;
if(priv->SetRFPowerStateInProgress == true)
return false;
- RT_TRACE(COMP_POWER, "===========> SetRFPowerState8190()!\n");
+ //RT_TRACE(COMP_PS, "===========> SetRFPowerState8190()!\n");
priv->SetRFPowerStateInProgress = true;
switch(priv->rf_chip)
switch( eRFPowerState )
{
case eRfOn:
- RT_TRACE(COMP_POWER, "SetRFPowerState8190() eRfOn !\n");
+ //RT_TRACE(COMP_PS, "SetRFPowerState8190() eRfOn !\n");
//RXTX enable control: On
//for(eRFPath = 0; eRFPath <pHalData->NumTotalRFPath; eRFPath++)
- // PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
- #ifdef RTL8190P
+ // PHY_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x2);
+#ifdef RTL8190P
if(priv->rf_type == RF_2T4R)
{
//enable RF-Chip A/B
//analog to digital part2 on
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1800, 0x3); // 0x880[12:11]
}
- #else
- write_nic_byte(dev, ANAPAR, 0x37);//160MHz
- write_nic_byte(dev, MacBlkCtrl, 0x17); // 0x403
- mdelay(1);
- //enable clock 80/88 MHz
-
- priv->bHwRfOffAction = 0;
- //}
-
- // Baseband reset 2008.09.30 add
- write_nic_byte(dev, BB_RESET, (read_nic_byte(dev, BB_RESET)|BIT0));
-
- //2 AFE
- // 2008.09.30 add
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x20000000, 0x1); // 0x884
- //analog to digital part2 on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
- //digital to analog on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x98, 0x13); // 0x880[4:3]
- //analog to digital on
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf03, 0xf03);// 0x88c[9:8]
- //rx antenna on
- //PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
- //rx antenna on 2008.09.30 mark
- //PHY_SetBBReg(Adapter, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
-
- //2 RF
- //enable RF-Chip A/B
+ else if(priv->rf_type == RF_1T1R) //RF-C
+ {
+ //enable RF-Chip C/D
+ rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x1); // 0x868[4]
+ //analog to digital on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x400, 0x1);// 0x88c[10]
+ //digital to analog on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x80, 0x1); // 0x880[7]
+ //rx antenna on
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x4, 0x1);// 0xc04[2]
+ //rx antenna on
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x4, 0x1);// 0xd04[2]
+ //analog to digital part2 on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x800, 0x1); // 0x880[11]
+ }
+
+#elif defined RTL8192E
+ // turn on RF
+ if((priv->ieee80211->eRFPowerState == eRfOff) && RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
+ { // The current RF state is OFF and the RF OFF level is halting the NIC, re-initialize the NIC.
+ bool rtstatus = true;
+ u32 InitilizeCount = 3;
+ do
+ {
+ InitilizeCount--;
+ priv->RegRfOff = false;
+ rtstatus = NicIFEnableNIC(dev);
+ }while( (rtstatus != true) &&(InitilizeCount >0) );
+
+ if(rtstatus != true)
+ {
+ RT_TRACE(COMP_ERR,"%s():Initialize Adapter fail,return\n",__FUNCTION__);
+ priv->SetRFPowerStateInProgress = false;
+ return false;
+ }
+
+ RT_CLEAR_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ write_nic_byte(dev, ANAPAR, 0x37);//160MHz
+ //write_nic_byte(dev, MacBlkCtrl, 0x17); // 0x403
+ mdelay(1);
+ //enable clock 80/88 MHz
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x4, 0x1); // 0x880[2]
+ priv->bHwRfOffAction = 0;
+ //}
+
+ //RF-A, RF-B
+ //enable RF-Chip A/B
rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
- rtl8192_setBBreg(dev, rFPGA0_XB_RFInterfaceOE, BIT4, 0x1); // 0x864[4]
+ //analog to digital on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300, 0x3);// 0x88c[9:8]
+ //digital to analog on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x18, 0x3); // 0x880[4:3]
+ //rx antenna on
+ rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
+ //rx antenna on
+ rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
+ //analog to digital part2 on
+ rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
+
+ // Baseband reset 2008.09.30 add
+ //write_nic_byte(dev, BB_RESET, (read_nic_byte(dev, BB_RESET)|BIT0));
+
+ //2 AFE
+ // 2008.09.30 add
+ //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x20000000, 0x1); // 0x884
+ //analog to digital part2 on
+ //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x3); // 0x880[6:5]
+
+
+ //digital to analog on
+ //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x98, 0x13); // 0x880[4:3]
+ //analog to digital on
+ //rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf03, 0xf03);// 0x88c[9:8]
+ //rx antenna on
+ //PHY_SetBBReg(dev, rOFDM0_TRxPathEnable, 0x3, 0x3);// 0xc04[1:0]
+ //rx antenna on 2008.09.30 mark
+ //PHY_SetBBReg(dev, rOFDM1_TRxPathEnable, 0x3, 0x3);// 0xd04[1:0]
+
+ //2 RF
+ //enable RF-Chip A/B
+ //rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x1); // 0x860[4]
+ //rtl8192_setBBreg(dev, rFPGA0_XB_RFInterfaceOE, BIT4, 0x1); // 0x864[4]
+
+ }
+
#endif
break;
// By Bruce, 2008-01-16.
//
case eRfSleep:
- case eRfOff:
- RT_TRACE(COMP_POWER, "SetRFPowerState8190() eRfOff/Sleep !\n");
- if (pPSC->bLeisurePs)
+ {
+ // HW setting had been configured with deeper mode.
+ if(priv->ieee80211->eRFPowerState == eRfOff)
+ break;
+
+ // Update current RF state variable.
+ //priv->ieee80211->eRFPowerState = eRFPowerState;
+
+ //if (pPSC->bLeisurePs)
{
for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; )
{
- switch(QueueID) {
- case MGNT_QUEUE:
- tail=priv->txmapringtail;
- head=priv->txmapringhead;
+ ring = &priv->tx_ring[QueueID];
+
+ if(skb_queue_len(&ring->queue) == 0)
+ {
+ QueueID++;
+ continue;
+ }
+ else
+ {
+ RT_TRACE((COMP_POWER|COMP_RF), "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID);
+ udelay(10);
+ i++;
+ }
+
+ if(i >= MAX_DOZE_WAITING_TIMES_9x)
+ {
+ RT_TRACE(COMP_POWER, "\n\n\n TimeOut!! SetRFPowerState8190(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID);
break;
+ }
+ }
+ }
- case BK_QUEUE:
- tail=priv->txbkpringtail;
- head=priv->txbkpringhead;
+ //if(Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
+#ifdef RTL8190P
+ {
+ PHY_SetRtl8190pRfOff(dev);
+ }
+ //else if(Adapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+#elif defined RTL8192E
+ {
+ PHY_SetRtl8192eRfOff(dev);
+ }
+#endif
+ }
break;
- case BE_QUEUE:
- tail=priv->txbepringtail;
- head=priv->txbepringhead;
- break;
+ case eRfOff:
+ //RT_TRACE(COMP_PS, "SetRFPowerState8190() eRfOff/Sleep !\n");
- case VI_QUEUE:
- tail=priv->txvipringtail;
- head=priv->txvipringhead;
- break;
+ // Update current RF state variable.
+ //priv->ieee80211->eRFPowerState = eRFPowerState;
- case VO_QUEUE:
- tail=priv->txvopringtail;
- head=priv->txvopringhead;
- break;
+ //
+ // Disconnect with Any AP or STA.
+ //
+ for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; )
+ {
+ ring = &priv->tx_ring[QueueID];
- default:
- tail=head=NULL;
- break;
- }
- if(tail == head)
+ if(skb_queue_len(&ring->queue) == 0)
{
- //DbgPrint("QueueID = %d", QueueID);
QueueID++;
continue;
}
else
{
- RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times BusyQueue[%d] !=0 before doze!\n", (i+1), QueueID);
+ RT_TRACE(COMP_POWER,
+ "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID);
udelay(10);
i++;
}
if(i >= MAX_DOZE_WAITING_TIMES_9x)
{
- RT_TRACE(COMP_POWER, "\n\n\n TimeOut!! SetRFPowerState8190(): eRfOff: %d times BusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID);
+ RT_TRACE(COMP_POWER, "\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID);
break;
}
}
+
+ //if(Adapter->HardwareType == HARDWARE_TYPE_RTL8190P)
+#if defined RTL8190P
+ {
+ PHY_SetRtl8190pRfOff(dev);
}
- #ifdef RTL8190P
- if(priv->rf_type == RF_2T4R)
+ //else if(Adapter->HardwareType == HARDWARE_TYPE_RTL8192E)
+#elif defined RTL8192E
{
- //disable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
+ //if(pPSC->RegRfPsLevel & RT_RF_OFF_LEVL_HALT_NIC && !RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC) && priv->ieee80211->RfOffReason > RF_CHANGE_BY_PS)
+ if (pPSC->RegRfPsLevel & RT_RF_OFF_LEVL_HALT_NIC && !RT_IN_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC))
+ { // Disable all components.
+ //
+ // Note:
+ // NicIFSetLinkStatus is a big problem when we indicate the status to OS,
+ // the OS(XP) will reset. But now, we cnnot find why the NIC is hard to receive
+ // packets after RF ON. Just keep this function here and still work to find out the root couse.
+ // By Bruce, 2009-05-01.
+ //
+ //NicIFSetLinkStatus( Adapter, RT_MEDIA_DISCONNECT );
+ //if HW radio of , need to indicate scan complete first for not be reset.
+ //if(MgntScanInProgress(pMgntInfo))
+ // MgntResetScanProcess( Adapter );
+
+ // <1> Disable Interrupt
+ //rtl8192_irq_disable(dev);
+ // <2> Stop all timer
+ //MgntCancelAllTimer(Adapter);
+ // <3> Disable Adapter
+ //NicIFHaltAdapter(Adapter, false);
+ NicIFDisableNIC(dev);
+ RT_SET_PS_LEVEL(pPSC, RT_RF_OFF_LEVL_HALT_NIC);
+ }
+ else if (!(pPSC->RegRfPsLevel & RT_RF_OFF_LEVL_HALT_NIC))
+ { // Normal case.
+ // IPS should go to this.
+ PHY_SetRtl8192eRfOff(dev);
+ }
+ }
+#else
+ else
+ {
+ RT_TRACE(COMP_DBG,DBG_TRACE,("It is not 8190Pci and 8192PciE \n"));
}
- //disable RF-Chip C/D
- rtl8192_setBBreg(dev, rFPGA0_XC_RFInterfaceOE, BIT4, 0x0); // 0x868[4]
- //analog to digital off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
- //digital to analog off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e0, 0x0); // 0x880[8:5]
- //rx antenna off
- rtl8192_setBBreg(dev, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0]
- //rx antenna off
- rtl8192_setBBreg(dev, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0]
- //analog to digital part2 off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x1e00, 0x0); // 0x880[12:9]
-#else //8192E
- //2 RF
- //disable RF-Chip A/B
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4, 0x0); // 0x860[4]
- rtl8192_setBBreg(dev, rFPGA0_XB_RFInterfaceOE, BIT4, 0x0); // 0x864[4]
- //2 AFE
- //analog to digital off, for power save
- //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter4, 0xf00, 0x0);// 0x88c[11:8]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf03, 0x0); // 2008.09.30 Modify
- //digital to analog off, for power save
- //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, 0x18, 0x0); // 0x880[4:3]
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x98, 0x0); // 0x880 2008.09.30 Modify
- //rx antenna off 2008.09.30 mark
- //PHY_SetBBReg(Adapter, rOFDM0_TRxPathEnable, 0xf, 0x0);// 0xc04[3:0]
- //rx antenna off 2008.09.30 mark
- //PHY_SetBBReg(Adapter, rOFDM1_TRxPathEnable, 0xf, 0x0);// 0xd04[3:0]
- //analog to digital part2 off, for power save
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter1, 0x60, 0x0); // 0x880[6:5]
- // 2008.09.30 add
- rtl8192_setBBreg(dev, rFPGA0_AnalogParameter2, 0x20000000, 0x0); // 0x884
-
-
- //disable clock 80/88 MHz 2008.09.30 mark
- //PHY_SetBBReg(Adapter, rFPGA0_AnalogParameter1, 0x4, 0x0); // 0x880[2]
- //2 BB
- // Baseband reset 2008.09.30 add
- write_nic_byte(dev, BB_RESET, (read_nic_byte(dev, BB_RESET)|BIT0)); // 0x101
- //MAC: off
- write_nic_byte(dev, MacBlkCtrl, 0x0); // 0x403
- //slow down cpu/lbus clock from 160MHz to Lower
- write_nic_byte(dev, ANAPAR, 0x07); // 0x 17 40MHz
- priv->bHwRfOffAction = 0;
- //}
#endif
+
break;
default:
bResult = false;
- RT_TRACE(COMP_ERR, "SetRFPowerState8190(): unknown state to set: 0x%X!!!\n", eRFPowerState);
+ RT_TRACE(COMP_ERR, "SetRFPowerState8190(): unknow state to set: 0x%X!!!\n", eRFPowerState);
break;
}
{
// Update current RF state variable.
priv->ieee80211->eRFPowerState = eRFPowerState;
-
- switch(priv->rf_chip )
- {
- case RF_8256:
- switch(priv->ieee80211->eRFPowerState)
- {
- case eRfOff:
- //
- //If Rf off reason is from IPS, Led should blink with no link, by Maddest 071015
- //
- if(priv->ieee80211->RfOffReason==RF_CHANGE_BY_IPS )
- {
- #ifdef TO_DO
- Adapter->HalFunc.LedControlHandler(Adapter,LED_CTL_NO_LINK);
- #endif
- }
- else
- {
- // Turn off LED if RF is not ON.
- #ifdef TO_DO
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_POWER_OFF);
- #endif
- }
- break;
-
- case eRfOn:
- // Turn on RF we are still linked, which might happen when
- // we quickly turn off and on HW RF. 2006.05.12, by rcnjko.
- if( priv->ieee80211->state == IEEE80211_LINKED)
- {
- #ifdef TO_DO
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_LINK);
- #endif
- }
- else
- {
- // Turn off LED if RF is not ON.
- #ifdef TO_DO
- Adapter->HalFunc.LedControlHandler(Adapter, LED_CTL_NO_LINK);
- #endif
- }
- break;
-
- default:
- // do nothing.
- break;
- }// Switch RF state
-
- break;
-
- default:
- RT_TRACE(COMP_ERR, "SetRFPowerState8190(): Unknown RF type\n");
- break;
- }// Switch RFChipID
}
+ //printk("%s()priv->ieee80211->eRFPowerState:%s\n" ,__func__,priv->ieee80211->eRFPowerState == eRfOn ? "On" : "Off");
priv->SetRFPowerStateInProgress = false;
- RT_TRACE(COMP_POWER, "<=========== SetRFPowerState8190() bResult = %d!\n", bResult);
+ //RT_TRACE(COMP_PS, "<=========== SetRFPowerState8190() bResult = %d!\n", bResult);
return bResult;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff