*/
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/of_platform.h>
+#include <linux/nwpserial.h>
-#include <asm/of_platform.h>
#include <asm/prom.h>
struct of_serial_info {
int type, struct uart_port *port)
{
struct resource resource;
- struct device_node *np = ofdev->node;
+ struct device_node *np = ofdev->dev.of_node;
const unsigned int *clk, *spd;
- int ret;
+ const u32 *prop;
+ int ret, prop_size;
memset(port, 0, sizeof *port);
spd = of_get_property(np, "current-speed", NULL);
spin_lock_init(&port->lock);
port->mapbase = resource.start;
+
+ /* Check for shifted address mapping */
+ prop = of_get_property(np, "reg-offset", &prop_size);
+ if (prop && (prop_size == sizeof(u32)))
+ port->mapbase += *prop;
+
+ /* Check for registers offset within the devices address range */
+ prop = of_get_property(np, "reg-shift", &prop_size);
+ if (prop && (prop_size == sizeof(u32)))
+ port->regshift = *prop;
+
port->irq = irq_of_parse_and_map(np, 0);
port->iotype = UPIO_MEM;
port->type = type;
port->uartclk = *clk;
port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
- | UPF_FIXED_PORT;
+ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
port->dev = &ofdev->dev;
- port->custom_divisor = *clk / (16 * (*spd));
+ /* If current-speed was set, then try not to change it. */
+ if (spd)
+ port->custom_divisor = *clk / (16 * (*spd));
return 0;
}
int port_type;
int ret;
- if (of_find_property(ofdev->node, "used-by-rtas", NULL))
+ if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
return -EBUSY;
info = kmalloc(sizeof(*info), GFP_KERNEL);
goto out;
switch (port_type) {
+#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
ret = serial8250_register_port(&port);
break;
+#endif
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ case PORT_NWPSERIAL:
+ ret = nwpserial_register_port(&port);
+ break;
+#endif
default:
/* need to add code for these */
case PORT_UNKNOWN:
info->type = port_type;
info->line = ret;
- ofdev->dev.driver_data = info;
+ dev_set_drvdata(&ofdev->dev, info);
return 0;
out:
kfree(info);
*/
static int of_platform_serial_remove(struct of_device *ofdev)
{
- struct of_serial_info *info = ofdev->dev.driver_data;
+ struct of_serial_info *info = dev_get_drvdata(&ofdev->dev);
switch (info->type) {
+#ifdef CONFIG_SERIAL_8250
case PORT_8250 ... PORT_MAX_8250:
serial8250_unregister_port(info->line);
break;
+#endif
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ case PORT_NWPSERIAL:
+ nwpserial_unregister_port(info->line);
+ break;
+#endif
default:
/* need to add code for these */
break;
static struct of_device_id __devinitdata of_platform_serial_table[] = {
{ .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, },
{ .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, },
+ { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, },
{ .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, },
{ .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, },
+ { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, },
+#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
+ { .type = "serial", .compatible = "ibm,qpace-nwp-serial",
+ .data = (void *)PORT_NWPSERIAL, },
+#endif
{ .type = "serial", .data = (void *)PORT_UNKNOWN, },
{ /* end of list */ },
};
-static struct of_platform_driver __devinitdata of_platform_serial_driver = {
- .owner = THIS_MODULE,
- .name = "of_serial",
+static struct of_platform_driver of_platform_serial_driver = {
+ .driver = {
+ .name = "of_serial",
+ .owner = THIS_MODULE,
+ .of_match_table = of_platform_serial_table,
+ },
.probe = of_platform_serial_probe,
.remove = of_platform_serial_remove,
- .match_table = of_platform_serial_table,
};
static int __init of_platform_serial_init(void)