#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/bio.h>
#include <linux/string.h>
#include "sr.h"
+MODULE_DESCRIPTION("SCSI cdrom (sr) driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_ROM);
+MODULE_ALIAS_SCSI_DEVICE(TYPE_WORM);
+
#define SR_DISKS 256
-#define MAX_RETRIES 3
-#define SR_TIMEOUT (30 * HZ)
#define SR_CAPABILITIES \
(CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
- CDC_PLAY_AUDIO|CDC_RESET|CDC_IOCTLS|CDC_DRIVE_STATUS| \
+ CDC_PLAY_AUDIO|CDC_RESET|CDC_DRIVE_STATUS| \
CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
CDC_MRW|CDC_MRW_W|CDC_RAM)
static int sr_probe(struct device *);
static int sr_remove(struct device *);
-static int sr_init_command(struct scsi_cmnd *);
+static int sr_done(struct scsi_cmnd *);
static struct scsi_driver sr_template = {
.owner = THIS_MODULE,
.probe = sr_probe,
.remove = sr_remove,
},
- .init_command = sr_init_command,
+ .done = sr_done,
};
static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
.get_mcn = sr_get_mcn,
.reset = sr_reset,
.audio_ioctl = sr_audio_ioctl,
- .dev_ioctl = sr_dev_ioctl,
.capability = SR_CAPABILITIES,
.generic_packet = sr_packet,
};
mutex_unlock(&sr_ref_mutex);
}
+/* identical to scsi_test_unit_ready except that it doesn't
+ * eat the NOT_READY returns for removable media */
+int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr)
+{
+ int retries = MAX_RETRIES;
+ int the_result;
+ u8 cmd[] = {TEST_UNIT_READY, 0, 0, 0, 0, 0 };
+
+ /* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION
+ * conditions are gone, or a timeout happens
+ */
+ do {
+ the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL,
+ 0, sshdr, SR_TIMEOUT,
+ retries--);
+ if (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)
+ sdev->changed = 1;
+
+ } while (retries > 0 &&
+ (!scsi_status_is_good(the_result) ||
+ (scsi_sense_valid(sshdr) &&
+ sshdr->sense_key == UNIT_ATTENTION)));
+ return the_result;
+}
+
/*
* This function checks to see if the media has been changed in the
* CDROM drive. It is possible that we have already sensed a change,
* an inode for that to work, and we do not always have one.
*/
-int sr_media_change(struct cdrom_device_info *cdi, int slot)
+static int sr_media_change(struct cdrom_device_info *cdi, int slot)
{
struct scsi_cd *cd = cdi->handle;
int retval;
+ struct scsi_sense_hdr *sshdr;
if (CDSL_CURRENT != slot) {
/* no changer support */
return -EINVAL;
}
- retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES);
- if (retval) {
- /* Unable to test, unit probably not ready. This usually
- * means there is no disc in the drive. Mark as changed,
- * and we will figure it out later once the drive is
- * available again. */
+ sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
+ retval = sr_test_unit_ready(cd->device, sshdr);
+ if (retval || (scsi_sense_valid(sshdr) &&
+ /* 0x3a is medium not present */
+ sshdr->asc == 0x3a)) {
+ /* Media not present or unable to test, unit probably not
+ * ready. This usually means there is no disc in the drive.
+ * Mark as changed, and we will figure it out later once
+ * the drive is available again.
+ */
cd->device->changed = 1;
- return 1; /* This will force a flush, if called from
- * check_disk_change */
+ /* This will force a flush, if called from check_disk_change */
+ retval = 1;
+ goto out;
};
retval = cd->device->changed;
if (retval) {
/* check multisession offset etc */
sr_cd_check(cdi);
-
get_sectorsize(cd);
}
+
+out:
+ /* Notify userspace, that media has changed. */
+ if (retval != cd->previous_state)
+ sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE,
+ GFP_KERNEL);
+ cd->previous_state = retval;
+ kfree(sshdr);
+
return retval;
}
/*
- * rw_intr is the interrupt routine for the device driver.
+ * sr_done is the interrupt routine for the device driver.
*
- * It will be notified on the end of a SCSI read / write, and will take on
+ * It will be notified on the end of a SCSI read / write, and will take one
* of several actions based on success or failure.
*/
-static void rw_intr(struct scsi_cmnd * SCpnt)
+static int sr_done(struct scsi_cmnd *SCpnt)
{
int result = SCpnt->result;
- int this_count = SCpnt->bufflen;
+ int this_count = scsi_bufflen(SCpnt);
int good_bytes = (result == 0 ? this_count : 0);
int block_sectors = 0;
long error_sector;
}
}
- /*
- * This calls the generic completion function, now that we know
- * how many actual sectors finished, and how many sectors we need
- * to say have failed.
- */
- scsi_io_completion(SCpnt, good_bytes, block_sectors << 9);
+ return good_bytes;
}
-static int sr_init_command(struct scsi_cmnd * SCpnt)
+static int sr_prep_fn(struct request_queue *q, struct request *rq)
{
- int block=0, this_count, s_size, timeout = SR_TIMEOUT;
- struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
+ int block = 0, this_count, s_size;
+ struct scsi_cd *cd;
+ struct scsi_cmnd *SCpnt;
+ struct scsi_device *sdp = q->queuedata;
+ int ret;
+
+ if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
+ ret = scsi_setup_blk_pc_cmnd(sdp, rq);
+ goto out;
+ } else if (rq->cmd_type != REQ_TYPE_FS) {
+ ret = BLKPREP_KILL;
+ goto out;
+ }
+ ret = scsi_setup_fs_cmnd(sdp, rq);
+ if (ret != BLKPREP_OK)
+ goto out;
+ SCpnt = rq->special;
+ cd = scsi_cd(rq->rq_disk);
+
+ /* from here on until we're complete, any goto out
+ * is used for a killable error condition */
+ ret = BLKPREP_KILL;
SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
- SCpnt->request->nr_sectors));
+ rq->nr_sectors));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
- return 0;
+ goto out;
}
if (cd->device->changed) {
* quietly refuse to do anything to a changed disc until the
* changed bit has been reset
*/
- return 0;
+ goto out;
}
/*
if (s_size != 512 && s_size != 1024 && s_size != 2048) {
scmd_printk(KERN_ERR, SCpnt, "bad sector size %d\n", s_size);
- return 0;
+ goto out;
}
- if (rq_data_dir(SCpnt->request) == WRITE) {
+ if (rq_data_dir(rq) == WRITE) {
if (!cd->device->writeable)
- return 0;
+ goto out;
SCpnt->cmnd[0] = WRITE_10;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
cd->cdi.media_written = 1;
- } else if (rq_data_dir(SCpnt->request) == READ) {
+ } else if (rq_data_dir(rq) == READ) {
SCpnt->cmnd[0] = READ_10;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
- blk_dump_rq_flags(SCpnt->request, "Unknown sr command");
- return 0;
+ blk_dump_rq_flags(rq, "Unknown sr command");
+ goto out;
}
{
- struct scatterlist *sg = SCpnt->request_buffer;
- int i, size = 0;
- for (i = 0; i < SCpnt->use_sg; i++)
- size += sg[i].length;
+ struct scatterlist *sg;
+ int i, size = 0, sg_count = scsi_sg_count(SCpnt);
+
+ scsi_for_each_sg(SCpnt, sg, sg_count, i)
+ size += sg->length;
- if (size != SCpnt->request_bufflen && SCpnt->use_sg) {
+ if (size != scsi_bufflen(SCpnt)) {
scmd_printk(KERN_ERR, SCpnt,
"mismatch count %d, bytes %d\n",
- size, SCpnt->request_bufflen);
- if (SCpnt->request_bufflen > size)
- SCpnt->request_bufflen = SCpnt->bufflen = size;
+ size, scsi_bufflen(SCpnt));
+ if (scsi_bufflen(SCpnt) > size)
+ SCpnt->sdb.length = size;
}
}
/*
* request doesn't start on hw block boundary, add scatter pads
*/
- if (((unsigned int)SCpnt->request->sector % (s_size >> 9)) ||
- (SCpnt->request_bufflen % s_size)) {
+ if (((unsigned int)rq->sector % (s_size >> 9)) ||
+ (scsi_bufflen(SCpnt) % s_size)) {
scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n");
- return 0;
+ goto out;
}
- this_count = (SCpnt->request_bufflen >> 9) / (s_size >> 9);
+ this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9);
SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
cd->cdi.name,
- (rq_data_dir(SCpnt->request) == WRITE) ?
+ (rq_data_dir(rq) == WRITE) ?
"writing" : "reading",
- this_count, SCpnt->request->nr_sectors));
+ this_count, rq->nr_sectors));
SCpnt->cmnd[1] = 0;
- block = (unsigned int)SCpnt->request->sector / (s_size >> 9);
+ block = (unsigned int)rq->sector / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
- SCpnt->request_bufflen = SCpnt->bufflen =
- this_count * s_size;
+ SCpnt->sdb.length = this_count * s_size;
}
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->transfersize = cd->device->sector_size;
SCpnt->underflow = this_count << 9;
SCpnt->allowed = MAX_RETRIES;
- SCpnt->timeout_per_command = timeout;
-
- /*
- * This is the completion routine we use. This is matched in terms
- * of capability to this function.
- */
- SCpnt->done = rw_intr;
/*
* This indicates that the command is ready from our end to be
* queued.
*/
- return 1;
+ ret = BLKPREP_OK;
+ out:
+ return scsi_prep_return(q, rq, ret);
}
static int sr_block_open(struct inode *inode, struct file *file)
{
struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
struct scsi_device *sdev = cd->device;
+ void __user *argp = (void __user *)arg;
+ int ret;
- /*
- * Send SCSI addressing ioctls directly to mid level, send other
- * ioctls to cdrom/block level.
- */
- switch (cmd) {
- case SCSI_IOCTL_GET_IDLUN:
- case SCSI_IOCTL_GET_BUS_NUMBER:
- return scsi_ioctl(sdev, cmd, (void __user *)arg);
+ /*
+ * Send SCSI addressing ioctls directly to mid level, send other
+ * ioctls to cdrom/block level.
+ */
+ switch (cmd) {
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
+ return scsi_ioctl(sdev, cmd, argp);
}
- return cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
+
+ ret = cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
+ if (ret != -ENOSYS)
+ return ret;
+
+ /*
+ * ENODEV means that we didn't recognise the ioctl, or that we
+ * cannot execute it in the current device state. In either
+ * case fall through to scsi_ioctl, which will return ENDOEV again
+ * if it doesn't recognise the ioctl
+ */
+ ret = scsi_nonblockable_ioctl(sdev, cmd, argp, NULL);
+ if (ret != -ENODEV)
+ return ret;
+ return scsi_ioctl(sdev, cmd, argp);
}
static int sr_block_media_changed(struct gendisk *disk)
disk->fops = &sr_bdops;
disk->flags = GENHD_FL_CD;
+ blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT);
+
cd->device = sdev;
cd->disk = disk;
cd->driver = &sr_template;
cd->disk = disk;
cd->capacity = 0x1fffff;
cd->device->changed = 1; /* force recheck CD type */
+ cd->previous_state = 1;
cd->use = 1;
cd->readcd_known = 0;
cd->readcd_cdda = 0;
/* FIXME: need to handle a get_capabilities failure properly ?? */
get_capabilities(cd);
+ blk_queue_prep_rq(sdev->request_queue, sr_prep_fn);
sr_vendor_init(cd);
disk->driverfs_dev = &sdev->sdev_gendev;
static void get_sectorsize(struct scsi_cd *cd)
{
unsigned char cmd[10];
- unsigned char *buffer;
+ unsigned char buffer[8];
int the_result, retries = 3;
int sector_size;
- request_queue_t *queue;
-
- buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
- if (!buffer)
- goto Enomem;
+ struct request_queue *queue;
do {
cmd[0] = READ_CAPACITY;
memset((void *) &cmd[1], 0, 9);
- memset(buffer, 0, 8);
+ memset(buffer, 0, sizeof(buffer));
/* Do the command and wait.. */
the_result = scsi_execute_req(cd->device, cmd, DMA_FROM_DEVICE,
- buffer, 8, NULL, SR_TIMEOUT,
- MAX_RETRIES);
+ buffer, sizeof(buffer), NULL,
+ SR_TIMEOUT, MAX_RETRIES);
retries--;
queue = cd->device->request_queue;
blk_queue_hardsect_size(queue, sector_size);
-out:
- kfree(buffer);
- return;
-Enomem:
- cd->capacity = 0x1fffff;
- cd->device->sector_size = 2048; /* A guess, just in case */
- goto out;
+ return;
}
static void get_capabilities(struct scsi_cd *cd)
{
unsigned char *buffer;
struct scsi_mode_data data;
- unsigned char cmd[MAX_COMMAND_SIZE];
struct scsi_sense_hdr sshdr;
- unsigned int the_result;
- int retries, rc, n;
+ int rc, n;
static const char *loadmech[] =
{
return;
}
- /* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION
- * conditions are gone, or a timeout happens
- */
- retries = 0;
- do {
- memset((void *)cmd, 0, MAX_COMMAND_SIZE);
- cmd[0] = TEST_UNIT_READY;
-
- the_result = scsi_execute_req (cd->device, cmd, DMA_NONE, NULL,
- 0, &sshdr, SR_TIMEOUT,
- MAX_RETRIES);
-
- retries++;
- } while (retries < 5 &&
- (!scsi_status_is_good(the_result) ||
- (scsi_sense_valid(&sshdr) &&
- sshdr.sense_key == UNIT_ATTENTION)));
+ /* eat unit attentions */
+ sr_test_unit_ready(cd->device, &sshdr);
/* ask for mode page 0x2a */
rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
struct gendisk *disk = cd->disk;
spin_lock(&sr_index_lock);
- clear_bit(disk->first_minor, sr_index_bits);
+ clear_bit(MINOR(disk_devt(disk)), sr_index_bits);
spin_unlock(&sr_index_lock);
unregister_cdrom(&cd->cdi);
rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
if (rc)
return rc;
- return scsi_register_driver(&sr_template.gendrv);
+ rc = scsi_register_driver(&sr_template.gendrv);
+ if (rc)
+ unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
+
+ return rc;
}
static void __exit exit_sr(void)
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff