-#if (!defined(dprintk))
+#ifndef dprintk
# define dprintk(x)
#endif
/* eg: if (nblank(dprintk(x))) */
#define _nblank(x) #x
#define nblank(x) _nblank(x)[0]
+#include <linux/interrupt.h>
/*------------------------------------------------------------------------------
* D E F I N E S
*----------------------------------------------------------------------------*/
+#ifndef AAC_DRIVER_BUILD
+# define AAC_DRIVER_BUILD 2461
+# define AAC_DRIVER_BRANCH "-ms"
+#endif
#define MAXIMUM_NUM_CONTAINERS 32
#define AAC_NUM_MGT_FIB 8
#define CONTAINER_TO_ID(cont) (cont)
#define CONTAINER_TO_LUN(cont) (0)
-#define aac_phys_to_logical(x) (x+1)
-#define aac_logical_to_phys(x) (x?x-1:0)
+#define aac_phys_to_logical(x) ((x)+1)
+#define aac_logical_to_phys(x) ((x)?(x)-1:0)
/* #define AAC_DETAILED_STATUS_INFO */
/*
- * DON'T CHANGE THE ORDER, this is set by the firmware
+ * Firmware constants
*/
-
-#define CT_NONE 0
-#define CT_VOLUME 1
-#define CT_MIRROR 2
-#define CT_STRIPE 3
-#define CT_RAID5 4
-#define CT_SSRW 5
-#define CT_SSRO 6
-#define CT_MORPH 7
-#define CT_PASSTHRU 8
-#define CT_RAID4 9
-#define CT_RAID10 10 /* stripe of mirror */
-#define CT_RAID00 11 /* stripe of stripe */
-#define CT_VOLUME_OF_MIRRORS 12 /* volume of mirror */
-#define CT_PSEUDO_RAID 13 /* really raid4 */
-#define CT_LAST_VOLUME_TYPE 14
-#define CT_OK 218
-/*
- * Types of objects addressable in some fashion by the client.
- * This is a superset of those objects handled just by the filesystem
- * and includes "raw" objects that an administrator would use to
- * configure containers and filesystems.
- */
-
-#define FT_REG 1 /* regular file */
-#define FT_DIR 2 /* directory */
-#define FT_BLK 3 /* "block" device - reserved */
-#define FT_CHR 4 /* "character special" device - reserved */
-#define FT_LNK 5 /* symbolic link */
-#define FT_SOCK 6 /* socket */
-#define FT_FIFO 7 /* fifo */
+#define CT_NONE 0
+#define CT_OK 218
#define FT_FILESYS 8 /* ADAPTEC's "FSA"(tm) filesystem */
#define FT_DRIVE 9 /* physical disk - addressable in scsi by bus/id/lun */
-#define FT_SLICE 10 /* virtual disk - raw volume - slice */
-#define FT_PARTITION 11 /* FSA partition - carved out of a slice - building block for containers */
-#define FT_VOLUME 12 /* Container - Volume Set */
-#define FT_STRIPE 13 /* Container - Stripe Set */
-#define FT_MIRROR 14 /* Container - Mirror Set */
-#define FT_RAID5 15 /* Container - Raid 5 Set */
-#define FT_DATABASE 16 /* Storage object with "foreign" content manager */
/*
* Host side memory scatter gather list
struct sgmap {
__le32 count;
- struct sgentry sg[1];
+ struct sgentry sg[1];
};
struct user_sgmap {
u32 count;
- struct user_sgentry sg[1];
+ struct user_sgentry sg[1];
};
struct sgmap64 {
struct creation_info
{
- u8 buildnum; /* e.g., 588 */
- u8 usec; /* e.g., 588 */
- u8 via; /* e.g., 1 = FSU,
- * 2 = API
+ u8 buildnum; /* e.g., 588 */
+ u8 usec; /* e.g., 588 */
+ u8 via; /* e.g., 1 = FSU,
+ * 2 = API
*/
- u8 year; /* e.g., 1997 = 97 */
+ u8 year; /* e.g., 1997 = 97 */
__le32 date; /*
- * unsigned Month :4; // 1 - 12
- * unsigned Day :6; // 1 - 32
- * unsigned Hour :6; // 0 - 23
- * unsigned Minute :6; // 0 - 60
- * unsigned Second :6; // 0 - 60
+ * unsigned Month :4; // 1 - 12
+ * unsigned Day :6; // 1 - 32
+ * unsigned Hour :6; // 0 - 23
+ * unsigned Minute :6; // 0 - 60
+ * unsigned Second :6; // 0 - 60
*/
__le32 serial[2]; /* e.g., 0x1DEADB0BFAFAF001 */
};
/*
* Set the queues on a 16 byte alignment
*/
-
+
#define QUEUE_ALIGNMENT 16
/*
* The adapter assumes the ProducerIndex and ConsumerIndex are grouped
* adjacently and in that order.
*/
-
+
struct aac_qhdr {
- __le64 header_addr;/* Address to hand the adapter to access
+ __le64 header_addr;/* Address to hand the adapter to access
to this queue head */
__le32 *producer; /* The producer index for this queue (host address) */
__le32 *consumer; /* The consumer index for this queue (host address) */
* Define all the events which the adapter would like to notify
* the host of.
*/
-
+
#define HostNormCmdQue 1 /* Change in host normal priority command queue */
#define HostHighCmdQue 2 /* Change in host high priority command queue */
#define HostNormRespQue 3 /* Change in host normal priority response queue */
u8 StructType; /* Type FIB */
u8 Flags; /* Flags for FIB */
__le16 Size; /* Size of this FIB in bytes */
- __le16 SenderSize; /* Size of the FIB in the sender
+ __le16 SenderSize; /* Size of the FIB in the sender
(for response sizing) */
__le32 SenderFibAddress; /* Host defined data in the FIB */
- __le32 ReceiverFibAddress;/* Logical address of this FIB for
+ __le32 ReceiverFibAddress;/* Logical address of this FIB for
the adapter */
u32 SenderData; /* Place holder for the sender to store data */
union {
struct {
- __le32 _ReceiverTimeStart; /* Timestamp for
+ __le32 _ReceiverTimeStart; /* Timestamp for
receipt of fib */
- __le32 _ReceiverTimeDone; /* Timestamp for
+ __le32 _ReceiverTimeDone; /* Timestamp for
completion of fib */
} _s;
} _u;
* FIB commands
*/
-#define TestCommandResponse 1
+#define TestCommandResponse 1
#define TestAdapterCommand 2
/*
* Lowlevel and comm commands
#define ContainerCommand64 501
#define ContainerRawIo 502
/*
- * Cluster Commands
- */
-#define ClusterCommand 550
-/*
* Scsi Port commands (scsi passthrough)
*/
#define ScsiPortCommand 600
*/
enum fib_xfer_state {
- HostOwned = (1<<0),
- AdapterOwned = (1<<1),
- FibInitialized = (1<<2),
- FibEmpty = (1<<3),
- AllocatedFromPool = (1<<4),
- SentFromHost = (1<<5),
- SentFromAdapter = (1<<6),
- ResponseExpected = (1<<7),
- NoResponseExpected = (1<<8),
- AdapterProcessed = (1<<9),
- HostProcessed = (1<<10),
- HighPriority = (1<<11),
- NormalPriority = (1<<12),
+ HostOwned = (1<<0),
+ AdapterOwned = (1<<1),
+ FibInitialized = (1<<2),
+ FibEmpty = (1<<3),
+ AllocatedFromPool = (1<<4),
+ SentFromHost = (1<<5),
+ SentFromAdapter = (1<<6),
+ ResponseExpected = (1<<7),
+ NoResponseExpected = (1<<8),
+ AdapterProcessed = (1<<9),
+ HostProcessed = (1<<10),
+ HighPriority = (1<<11),
+ NormalPriority = (1<<12),
Async = (1<<13),
AsyncIo = (1<<13), // rpbfix: remove with new regime
PageFileIo = (1<<14), // rpbfix: remove with new regime
__le32 AdapterFibAlign;
__le32 printfbuf;
__le32 printfbufsiz;
- __le32 HostPhysMemPages; /* number of 4k pages of host
+ __le32 HostPhysMemPages; /* number of 4k pages of host
physical memory */
__le32 HostElapsedSeconds; /* number of seconds since 1970. */
/*
*/
__le32 InitFlags; /* flags for supported features */
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
+#define INITFLAGS_DRIVER_USES_UTC_TIME 0x00000010
+#define INITFLAGS_DRIVER_SUPPORTS_PM 0x00000020
__le32 MaxIoCommands; /* max outstanding commands */
__le32 MaxIoSize; /* largest I/O command */
__le32 MaxFibSize; /* largest FIB to adapter */
struct aac_dev;
struct fib;
+struct scsi_cmnd;
struct adapter_ops
{
+ /* Low level operations */
void (*adapter_interrupt)(struct aac_dev *dev);
void (*adapter_notify)(struct aac_dev *dev, u32 event);
void (*adapter_disable_int)(struct aac_dev *dev);
+ void (*adapter_enable_int)(struct aac_dev *dev);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
- int (*adapter_send)(struct fib * fib);
+ int (*adapter_restart)(struct aac_dev *dev, int bled);
+ /* Transport operations */
+ int (*adapter_ioremap)(struct aac_dev * dev, u32 size);
+ irq_handler_t adapter_intr;
+ /* Packet operations */
+ int (*adapter_deliver)(struct fib * fib);
+ int (*adapter_bounds)(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba);
+ int (*adapter_read)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count);
+ int (*adapter_write)(struct fib * fib, struct scsi_cmnd * cmd, u64 lba, u32 count, int fua);
+ int (*adapter_scsi)(struct fib * fib, struct scsi_cmnd * cmd);
+ /* Administrative operations */
+ int (*adapter_comm)(struct aac_dev * dev, int comm);
};
/*
struct aac_driver_ident
{
- int (*init)(struct aac_dev *dev);
+ int (*init)(struct aac_dev *dev);
char * name;
char * vname;
char * model;
int quirks;
};
/*
- * Some adapter firmware needs communication memory
+ * Some adapter firmware needs communication memory
* below 2gig. This tells the init function to set the
* dma mask such that fib memory will be allocated where the
* adapter firmware can get to it.
#define AAC_QUIRK_17SG 0x0010
/*
+ * Some adapter firmware does not support 64 bit scsi passthrough
+ * commands.
+ */
+#define AAC_QUIRK_SCSI_32 0x0020
+
+/*
* The adapter interface specs all queues to be located in the same
- * physically contigous block. The host structure that defines the
+ * physically contiguous block. The host structure that defines the
* commuication queues will assume they are each a separate physically
- * contigous memory region that will support them all being one big
- * contigous block.
+ * contiguous memory region that will support them all being one big
+ * contiguous block.
* There is a command and response queue for each level and direction of
* commuication. These regions are accessed by both the host and adapter.
*/
-
+
struct aac_queue {
- u64 logical; /*address we give the adapter */
+ u64 logical; /*address we give the adapter */
struct aac_entry *base; /*system virtual address */
- struct aac_qhdr headers; /*producer,consumer q headers*/
- u32 entries; /*Number of queue entries */
+ struct aac_qhdr headers; /*producer,consumer q headers*/
+ u32 entries; /*Number of queue entries */
wait_queue_head_t qfull; /*Event to wait on if q full */
wait_queue_head_t cmdready; /*Cmd ready from the adapter */
- /* This is only valid for adapter to host command queues. */
- spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
+ /* This is only valid for adapter to host command queues. */
+ spinlock_t *lock; /* Spinlock for this queue must take this lock before accessing the lock */
spinlock_t lockdata; /* Actual lock (used only on one side of the lock) */
- struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
- /* only valid for command queues which receive entries from the adapter. */
- struct list_head pendingq; /* A queue of outstanding fib's to the adapter. */
+ struct list_head cmdq; /* A queue of FIBs which need to be prcessed by the FS thread. This is */
+ /* only valid for command queues which receive entries from the adapter. */
u32 numpending; /* Number of entries on outstanding queue. */
struct aac_dev * dev; /* Back pointer to adapter structure */
};
/*
- * Message queues. The order here is important, see also the
+ * Message queues. The order here is important, see also the
* queue type ordering
*/
/*
* SaP1 Message Unit Registers
*/
-
+
struct sa_drawbridge_CSR {
- /* Offset | Name */
+ /* Offset | Name */
__le32 reserved[10]; /* 00h-27h | Reserved */
u8 LUT_Offset; /* 28h | Lookup Table Offset */
- u8 reserved1[3]; /* 29h-2bh | Reserved */
+ u8 reserved1[3]; /* 29h-2bh | Reserved */
__le32 LUT_Data; /* 2ch | Looup Table Data */
__le32 reserved2[26]; /* 30h-97h | Reserved */
__le16 PRICLEARIRQ; /* 98h | Primary Clear Irq */
__le32 MAILBOX5; /* bch | Scratchpad 5 */
__le32 MAILBOX6; /* c0h | Scratchpad 6 */
__le32 MAILBOX7; /* c4h | Scratchpad 7 */
- __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
- __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
+ __le32 ROM_Setup_Data; /* c8h | Rom Setup and Data */
+ __le32 ROM_Control_Addr;/* cch | Rom Control and Address */
__le32 reserved3[12]; /* d0h-ffh | reserved */
__le32 LUT[64]; /* 100h-1ffh | Lookup Table Entries */
};
#define Mailbox5 SaDbCSR.MAILBOX5
#define Mailbox6 SaDbCSR.MAILBOX6
#define Mailbox7 SaDbCSR.MAILBOX7
-
+
#define DoorbellReg_p SaDbCSR.PRISETIRQ
#define DoorbellReg_s SaDbCSR.SECSETIRQ
#define DoorbellClrReg_p SaDbCSR.PRICLEARIRQ
#define DOORBELL_5 0x0020
#define DOORBELL_6 0x0040
-
+
#define PrintfReady DOORBELL_5
#define PrintfDone DOORBELL_5
-
+
struct sa_registers {
struct sa_drawbridge_CSR SaDbCSR; /* 98h - c4h */
};
-
+
#define Sa_MINIPORT_REVISION 1
#define sa_readw(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
-#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
+#define sa_readl(AEP, CSR) readl(&((AEP)->regs.sa->CSR))
#define sa_writew(AEP, CSR, value) writew(value, &((AEP)->regs.sa->CSR))
#define sa_writel(AEP, CSR, value) writel(value, &((AEP)->regs.sa->CSR))
__le32 IMRx[2]; /* 1310h | 10h | Inbound Message Registers */
__le32 OMRx[2]; /* 1318h | 18h | Outbound Message Registers */
__le32 IDR; /* 1320h | 20h | Inbound Doorbell Register */
- __le32 IISR; /* 1324h | 24h | Inbound Interrupt
+ __le32 IISR; /* 1324h | 24h | Inbound Interrupt
Status Register */
- __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
- Mask Register */
+ __le32 IIMR; /* 1328h | 28h | Inbound Interrupt
+ Mask Register */
__le32 ODR; /* 132Ch | 2Ch | Outbound Doorbell Register */
- __le32 OISR; /* 1330h | 30h | Outbound Interrupt
+ __le32 OISR; /* 1330h | 30h | Outbound Interrupt
Status Register */
- __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
+ __le32 OIMR; /* 1334h | 34h | Outbound Interrupt
Mask Register */
__le32 reserved2; /* 1338h | 38h | Reserved */
__le32 reserved3; /* 133Ch | 3Ch | Reserved */
__le32 InboundQueue;/* 1340h | 40h | Inbound Queue Port relative to firmware */
__le32 OutboundQueue;/*1344h | 44h | Outbound Queue Port relative to firmware */
- /* * Must access through ATU Inbound
- Translation Window */
+ /* * Must access through ATU Inbound
+ Translation Window */
};
struct rx_inbound {
__le32 Mailbox[8];
};
-#define InboundMailbox0 IndexRegs.Mailbox[0]
-#define InboundMailbox1 IndexRegs.Mailbox[1]
-#define InboundMailbox2 IndexRegs.Mailbox[2]
-#define InboundMailbox3 IndexRegs.Mailbox[3]
-#define InboundMailbox4 IndexRegs.Mailbox[4]
-#define InboundMailbox5 IndexRegs.Mailbox[5]
-#define InboundMailbox6 IndexRegs.Mailbox[6]
-
#define INBOUNDDOORBELL_0 0x00000001
#define INBOUNDDOORBELL_1 0x00000002
#define INBOUNDDOORBELL_2 0x00000004
typedef void (*fib_callback)(void *ctxt, struct fib *fibctx);
struct aac_fib_context {
- s16 type; // used for verification of structure
- s16 size;
+ s16 type; // used for verification of structure
+ s16 size;
u32 unique; // unique value representing this context
ulong jiffies; // used for cleanup - dmb changed to ulong
struct list_head next; // used to link context's into a linked list
- struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
+ struct semaphore wait_sem; // this is used to wait for the next fib to arrive.
int wait; // Set to true when thread is in WaitForSingleObject
unsigned long count; // total number of FIBs on FibList
struct list_head fib_list; // this holds fibs and their attachd hw_fibs
u8 EOM:1; /* End Of Medium - reserved for random access devices */
u8 filemark:1; /* Filemark - reserved for random access devices */
- u8 information[4]; /* for direct-access devices, contains the unsigned
- * logical block address or residue associated with
- * the sense key
+ u8 information[4]; /* for direct-access devices, contains the unsigned
+ * logical block address or residue associated with
+ * the sense key
*/
u8 add_sense_len; /* number of additional sense bytes to follow this field */
u8 cmnd_info[4]; /* not used */
u8 bit_ptr:3; /* indicates which byte of the CDB or parameter data
* was in error
*/
- u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
+ u8 BPV:1; /* bit pointer valid (BPV): 1- indicates that
* the bit_ptr field has valid value
*/
u8 reserved2:2;
/*
* The Adapter that this I/O is destined for.
*/
- struct aac_dev *dev;
+ struct aac_dev *dev;
/*
* This is the event the sendfib routine will wait on if the
* caller did not pass one and this is synch io.
*/
- struct semaphore event_wait;
+ struct semaphore event_wait;
spinlock_t event_lock;
u32 done; /* gets set to 1 when fib is complete */
- fib_callback callback;
- void *callback_data;
+ fib_callback callback;
+ void *callback_data;
u32 flags; // u32 dmb was ulong
/*
- * The following is used to put this fib context onto the
- * Outstanding I/O queue.
- */
- struct list_head queue;
- /*
* And for the internal issue/reply queues (we may be able
* to merge these two)
*/
struct list_head fiblink;
- void *data;
- struct hw_fib *hw_fib; /* Actual shared object */
+ void *data;
+ struct hw_fib *hw_fib_va; /* Actual shared object */
dma_addr_t hw_fib_pa; /* physical address of hw_fib*/
};
*
* This is returned by the RequestAdapterInfo block
*/
-
+
struct aac_adapter_info
{
__le32 platform;
__le32 biosrev;
__le32 biosbuild;
__le32 cluster;
- __le32 clusterchannelmask;
+ __le32 clusterchannelmask;
__le32 serial[2];
__le32 battery;
__le32 options;
__le32 Version;
__le32 FeatureBits;
u8 SlotNumber;
- u8 ReservedPad0[0];
+ u8 ReservedPad0[3];
u8 BuildDate[12];
__le32 CurrentNumberPorts;
- __le32 ReservedGrowth[24];
-};
-#define AAC_FEATURE_FALCON 0x00000010
+ struct {
+ u8 AssemblyPn[8];
+ u8 FruPn[8];
+ u8 BatteryFruPn[8];
+ u8 EcVersionString[8];
+ u8 Tsid[12];
+ } VpdInfo;
+ __le32 FlashFirmwareRevision;
+ __le32 FlashFirmwareBuild;
+ __le32 RaidTypeMorphOptions;
+ __le32 FlashFirmwareBootRevision;
+ __le32 FlashFirmwareBootBuild;
+ u8 MfgPcbaSerialNo[12];
+ u8 MfgWWNName[8];
+ __le32 SupportedOptions2;
+ __le32 StructExpansion;
+ /* StructExpansion == 1 */
+ __le32 FeatureBits3;
+ __le32 SupportedPerformanceModes;
+ __le32 ReservedForFutureGrowth[80];
+};
+#define AAC_FEATURE_FALCON cpu_to_le32(0x00000010)
+#define AAC_FEATURE_JBOD cpu_to_le32(0x08000000)
+/* SupportedOptions2 */
+#define AAC_OPTION_MU_RESET cpu_to_le32(0x00000001)
+#define AAC_OPTION_IGNORE_RESET cpu_to_le32(0x00000002)
+#define AAC_OPTION_POWER_MANAGEMENT cpu_to_le32(0x00000004)
#define AAC_SIS_VERSION_V3 3
#define AAC_SIS_SLOT_UNKNOWN 0xFF
#define AAC_OPT_HOST_TIME_FIB cpu_to_le32(1<<4)
#define AAC_OPT_RAID50 cpu_to_le32(1<<5)
#define AAC_OPT_4GB_WINDOW cpu_to_le32(1<<6)
-#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
+#define AAC_OPT_SCSI_UPGRADEABLE cpu_to_le32(1<<7)
#define AAC_OPT_SOFT_ERR_REPORT cpu_to_le32(1<<8)
-#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
+#define AAC_OPT_SUPPORTED_RECONDITION cpu_to_le32(1<<9)
#define AAC_OPT_SGMAP_HOST64 cpu_to_le32(1<<10)
#define AAC_OPT_ALARM cpu_to_le32(1<<11)
#define AAC_OPT_NONDASD cpu_to_le32(1<<12)
-#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
+#define AAC_OPT_SCSI_MANAGED cpu_to_le32(1<<13)
#define AAC_OPT_RAID_SCSI_MODE cpu_to_le32(1<<14)
#define AAC_OPT_SUPPLEMENT_ADAPTER_INFO cpu_to_le32(1<<16)
#define AAC_OPT_NEW_COMM cpu_to_le32(1<<17)
/*
* Map for 128 fib objects (64k)
- */
+ */
dma_addr_t hw_fib_pa;
struct hw_fib *hw_fib_va;
struct hw_fib *aif_base_va;
struct fib *fibs;
struct fib *free_fib;
- struct fib *timeout_fib;
spinlock_t fib_lock;
-
+
struct aac_queue_block *queues;
/*
* The user API will use an IOCTL to register itself to receive
* FIBs from the adapter. The following list is used to keep
* track of all the threads that have requested these FIBs. The
- * mutex is used to synchronize access to all data associated
+ * mutex is used to synchronize access to all data associated
* with the adapter fibs.
*/
struct list_head fib_list;
struct adapter_ops a_ops;
unsigned long fsrev; /* Main driver's revision number */
-
+
unsigned base_size; /* Size of mapped in region */
struct aac_init *init; /* Holds initialization info to communicate with adapter */
- dma_addr_t init_pa; /* Holds physical address of the init struct */
-
+ dma_addr_t init_pa; /* Holds physical address of the init struct */
+
struct pci_dev *pdev; /* Our PCI interface */
void * printfbuf; /* pointer to buffer used for printf's from the adapter */
void * comm_addr; /* Base address of Comm area */
struct fsa_dev_info *fsa_dev;
struct task_struct *thread;
int cardtype;
-
+
/*
* The following is the device specific extension.
*/
-#if (!defined(AAC_MIN_FOOTPRINT_SIZE))
+#ifndef AAC_MIN_FOOTPRINT_SIZE
# define AAC_MIN_FOOTPRINT_SIZE 8192
#endif
union
struct rx_registers __iomem *rx;
struct rkt_registers __iomem *rkt;
} regs;
+ volatile void __iomem *base;
+ volatile struct rx_inbound __iomem *IndexRegs;
u32 OIMR; /* Mask Register Cache */
/*
* AIF thread states
/* These are in adapter info but they are in the io flow so
* lets break them out so we don't have to do an AND to check them
*/
- u8 nondasd_support;
+ u8 nondasd_support;
+ u8 jbod;
+ u8 cache_protected;
u8 dac_support;
+ u8 needs_dac;
u8 raid_scsi_mode;
- u8 new_comm_interface;
+ u8 comm_interface;
+# define AAC_COMM_PRODUCER 0
+# define AAC_COMM_MESSAGE 1
/* macro side-effects BEWARE */
# define raw_io_interface \
init->InitStructRevision==cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4)
u8 raw_io_64;
u8 printf_enabled;
+ u8 in_reset;
+ u8 msi;
};
#define aac_adapter_interrupt(dev) \
#define aac_adapter_disable_int(dev) \
(dev)->a_ops.adapter_disable_int(dev)
+#define aac_adapter_enable_int(dev) \
+ (dev)->a_ops.adapter_enable_int(dev)
+
#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
-#define aac_adapter_send(fib) \
- ((fib)->dev)->a_ops.adapter_send(fib)
+#define aac_adapter_restart(dev,bled) \
+ (dev)->a_ops.adapter_restart(dev,bled)
+
+#define aac_adapter_ioremap(dev, size) \
+ (dev)->a_ops.adapter_ioremap(dev, size)
+
+#define aac_adapter_deliver(fib) \
+ ((fib)->dev)->a_ops.adapter_deliver(fib)
+
+#define aac_adapter_bounds(dev,cmd,lba) \
+ dev->a_ops.adapter_bounds(dev,cmd,lba)
+
+#define aac_adapter_read(fib,cmd,lba,count) \
+ ((fib)->dev)->a_ops.adapter_read(fib,cmd,lba,count)
+
+#define aac_adapter_write(fib,cmd,lba,count,fua) \
+ ((fib)->dev)->a_ops.adapter_write(fib,cmd,lba,count,fua)
+
+#define aac_adapter_scsi(fib,cmd) \
+ ((fib)->dev)->a_ops.adapter_scsi(fib,cmd)
+
+#define aac_adapter_comm(dev,comm) \
+ (dev)->a_ops.adapter_comm(dev, comm)
#define FIB_CONTEXT_FLAG_TIMED_OUT (0x00000001)
+#define FIB_CONTEXT_FLAG (0x00000002)
/*
* Define the command values
*/
-
+
#define Null 0
-#define GetAttributes 1
-#define SetAttributes 2
-#define Lookup 3
-#define ReadLink 4
-#define Read 5
-#define Write 6
+#define GetAttributes 1
+#define SetAttributes 2
+#define Lookup 3
+#define ReadLink 4
+#define Read 5
+#define Write 6
#define Create 7
#define MakeDirectory 8
#define SymbolicLink 9
#define ST_DQUOT 69
#define ST_STALE 70
#define ST_REMOTE 71
+#define ST_NOT_READY 72
#define ST_BADHANDLE 10001
#define ST_NOT_SYNC 10002
#define ST_BAD_COOKIE 10003
struct aac_read
{
- __le32 command;
- __le32 cid;
- __le32 block;
- __le32 count;
+ __le32 command;
+ __le32 cid;
+ __le32 block;
+ __le32 count;
struct sgmap sg; // Must be last in struct because it is variable
};
struct aac_read64
{
- __le32 command;
- __le16 cid;
- __le16 sector_count;
- __le32 block;
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
__le16 pad;
__le16 flags;
struct sgmap64 sg; // Must be last in struct because it is variable
struct aac_read_reply
{
- __le32 status;
- __le32 count;
+ __le32 status;
+ __le32 count;
};
struct aac_write
{
__le32 command;
- __le32 cid;
- __le32 block;
- __le32 count;
- __le32 stable; // Not used
+ __le32 cid;
+ __le32 block;
+ __le32 count;
+ __le32 stable; // Not used
struct sgmap sg; // Must be last in struct because it is variable
};
struct aac_write64
{
- __le32 command;
- __le16 cid;
- __le16 sector_count;
- __le32 block;
+ __le32 command;
+ __le16 cid;
+ __le16 sector_count;
+ __le32 block;
__le16 pad;
__le16 flags;
+#define IO_TYPE_WRITE 0x00000000
+#define IO_TYPE_READ 0x00000001
+#define IO_SUREWRITE 0x00000008
struct sgmap64 sg; // Must be last in struct because it is variable
};
struct aac_write_reply
{
__le32 status;
- __le32 count;
+ __le32 count;
__le32 committed;
};
u8 data[16];
};
+#define CT_POWER_MANAGEMENT 245
+#define CT_PM_START_UNIT 2
+#define CT_PM_STOP_UNIT 3
+#define CT_PM_UNIT_IMMEDIATE 1
+struct aac_power_management {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_POWER_MANAGEMENT */
+ __le32 sub; /* CT_PM_* */
+ __le32 cid;
+ __le32 parm; /* CT_PM_sub_* */
+};
+
+#define CT_PAUSE_IO 65
+#define CT_RELEASE_IO 66
+struct aac_pause {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_PAUSE_IO */
+ __le32 timeout; /* 10ms ticks */
+ __le32 min;
+ __le32 noRescan;
+ __le32 parm3;
+ __le32 parm4;
+ __le32 count; /* sizeof(((struct aac_pause_reply *)NULL)->data) */
+};
+
struct aac_srb
{
__le32 function;
#define SRB_NoDataXfer 0x0000
#define SRB_DisableDisconnect 0x0004
#define SRB_DisableSynchTransfer 0x0008
-#define SRB_BypassFrozenQueue 0x0010
+#define SRB_BypassFrozenQueue 0x0010
#define SRB_DisableAutosense 0x0020
#define SRB_DataIn 0x0040
-#define SRB_DataOut 0x0080
+#define SRB_DataOut 0x0080
/*
* SRB Functions - set in aac_srb->function
#define SRBF_RemoveDevice 0x0016
#define SRBF_DomainValidation 0x0017
-/*
+/*
* SRB SCSI Status - set in aac_srb->scsi_status
*/
#define SRB_STATUS_PENDING 0x00
*/
struct aac_mntent {
- __le32 oid;
+ __le32 oid;
u8 name[16]; /* if applicable */
struct creation_info create_info; /* if applicable */
__le32 capacity;
- __le32 vol; /* substrate structure */
- __le32 obj; /* FT_FILESYS,
- FT_DATABASE, etc. */
- __le32 state; /* unready for mounting,
+ __le32 vol; /* substrate structure */
+ __le32 obj; /* FT_FILESYS, etc. */
+ __le32 state; /* unready for mounting,
readonly, etc. */
- union aac_contentinfo fileinfo; /* Info specific to content
+ union aac_contentinfo fileinfo; /* Info specific to content
manager (eg, filesystem) */
- __le32 altoid; /* != oid <==> snapshot or
+ __le32 altoid; /* != oid <==> snapshot or
broken mirror exists */
__le32 capacityhigh;
};
-#define FSCS_NOTCLEAN 0x0001 /* fsck is neccessary before mounting */
+#define FSCS_NOTCLEAN 0x0001 /* fsck is necessary before mounting */
#define FSCS_READONLY 0x0002 /* possible result of broken mirror */
#define FSCS_HIDDEN 0x0004 /* should be ignored - set during a clear */
+#define FSCS_NOT_READY 0x0008 /* Array spinning up to fulfil request */
struct aac_query_mount {
__le32 command;
struct aac_mount {
__le32 status;
- __le32 type; /* should be same as that requested */
+ __le32 type; /* should be same as that requested */
__le32 count;
struct aac_mntent mnt[1];
};
__le32 count; /* sizeof(((struct aac_get_name_resp *)NULL)->data) */
};
-#define CT_OK 218
struct aac_get_name_resp {
__le32 dummy0;
__le32 dummy1;
u8 data[16];
};
+#define CT_CID_TO_32BITS_UID 165
+struct aac_get_serial {
+ __le32 command; /* VM_ContainerConfig */
+ __le32 type; /* CT_CID_TO_32BITS_UID */
+ __le32 cid;
+};
+
+struct aac_get_serial_resp {
+ __le32 dummy0;
+ __le32 dummy1;
+ __le32 status; /* CT_OK */
+ __le32 uid;
+};
+
/*
* The following command is sent to shut down each container.
*/
u32 disknum;
u32 cnum;
};
-
+
struct fib_ioctl
{
u32 fibctx;
__le32 version;
__le32 build;
};
-
+
/*
- * Ugly - non Linux like ioctl coding for back compat.
+ * Ugly - non Linux like ioctl coding for back compat.
*/
#define CTL_CODE(function, method) ( \
)
/*
- * Define the method codes for how buffers are passed for I/O and FS
+ * Define the method codes for how buffers are passed for I/O and FS
* controls
*/
* Filesystem ioctls
*/
-#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
-#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
+#define FSACTL_SENDFIB CTL_CODE(2050, METHOD_BUFFERED)
+#define FSACTL_SEND_RAW_SRB CTL_CODE(2067, METHOD_BUFFERED)
#define FSACTL_DELETE_DISK 0x163
#define FSACTL_QUERY_DISK 0x173
#define FSACTL_OPEN_GET_ADAPTER_FIB CTL_CODE(2100, METHOD_BUFFERED)
#define FSACTL_GET_NEXT_ADAPTER_FIB CTL_CODE(2101, METHOD_BUFFERED)
#define FSACTL_CLOSE_GET_ADAPTER_FIB CTL_CODE(2102, METHOD_BUFFERED)
#define FSACTL_MINIPORT_REV_CHECK CTL_CODE(2107, METHOD_BUFFERED)
-#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
+#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
#define FSACTL_GET_CONTAINERS 2131
#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED)
struct aac_common
{
/*
- * If this value is set to 1 then interrupt moderation will occur
+ * If this value is set to 1 then interrupt moderation will occur
* in the base commuication support.
*/
u32 irq_mod;
* The following macro is used when sending and receiving FIBs. It is
* only used for debugging.
*/
-
+
#ifdef DBG
#define FIB_COUNTER_INCREMENT(counter) (counter)++
#else
-#define FIB_COUNTER_INCREMENT(counter)
+#define FIB_COUNTER_INCREMENT(counter)
#endif
/*
#define RCV_TEMP_READINGS 0x00000025
#define GET_COMM_PREFERRED_SETTINGS 0x00000026
#define IOP_RESET 0x00001000
+#define IOP_RESET_ALWAYS 0x00001001
#define RE_INIT_ADAPTER 0x000000ee
/*
*
* The adapter reports is present state through the phase. Only
* a single phase should be ever be set. Each phase can have multiple
- * phase status bits to provide more detailed information about the
- * state of the board. Care should be taken to ensure that any phase
+ * phase status bits to provide more detailed information about the
+ * state of the board. Care should be taken to ensure that any phase
* status bits that are set when changing the phase are also valid
* for the new phase or be cleared out. Adapter software (monitor,
- * iflash, kernel) is responsible for properly maintining the phase
+ * iflash, kernel) is responsible for properly maintining the phase
* status mailbox when it is running.
- *
- * MONKER_API Phases
*
- * Phases are bit oriented. It is NOT valid to have multiple bits set
- */
+ * MONKER_API Phases
+ *
+ * Phases are bit oriented. It is NOT valid to have multiple bits set
+ */
#define SELF_TEST_FAILED 0x00000004
#define MONITOR_PANIC 0x00000020
* For FIB communication, we need all of the following things
* to send back to the user.
*/
-
-#define AifCmdEventNotify 1 /* Notify of event */
+
+#define AifCmdEventNotify 1 /* Notify of event */
#define AifEnConfigChange 3 /* Adapter configuration change */
#define AifEnContainerChange 4 /* Container configuration change */
#define AifEnDeviceFailure 5 /* SCSI device failed */
+#define AifEnEnclosureManagement 13 /* EM_DRIVE_* */
+#define EM_DRIVE_INSERTION 31
+#define EM_DRIVE_REMOVAL 32
+#define AifEnBatteryEvent 14 /* Change in Battery State */
#define AifEnAddContainer 15 /* A new array was created */
#define AifEnDeleteContainer 16 /* A container was deleted */
#define AifEnExpEvent 23 /* Firmware Event Log */
#define AifExeFirmwarePanic 3 /* Firmware Event Panic */
#define AifHighPriority 3 /* Highest Priority Event */
+#define AifEnAddJBOD 30 /* JBOD created */
+#define AifEnDeleteJBOD 31 /* JBOD deleted */
#define AifCmdJobProgress 2 /* Progress report */
#define AifJobCtrZero 101 /* Array Zero progress */
#define AifDenVolumeExtendComplete 201 /* A volume extend completed */
#define AifReqJobList 100 /* Gets back complete job list */
#define AifReqJobsForCtr 101 /* Gets back jobs for specific container */
-#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
-#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
+#define AifReqJobsForScsi 102 /* Gets back jobs for specific SCSI device */
+#define AifReqJobReport 103 /* Gets back a specific job report or list of them */
#define AifReqTerminateJob 104 /* Terminates job */
#define AifReqSuspendJob 105 /* Suspends a job */
-#define AifReqResumeJob 106 /* Resumes a job */
+#define AifReqResumeJob 106 /* Resumes a job */
#define AifReqSendAPIReport 107 /* API generic report requests */
#define AifReqAPIJobStart 108 /* Start a job from the API */
#define AifReqAPIJobUpdate 109 /* Update a job report from the API */
};
/**
- * Convert capacity to cylinders
- * accounting for the fact capacity could be a 64 bit value
+ * Convert capacity to cylinders
+ * accounting for the fact capacity could be a 64 bit value
*
*/
-static inline u32 cap_to_cyls(sector_t capacity, u32 divisor)
+static inline unsigned int cap_to_cyls(sector_t capacity, unsigned divisor)
{
sector_div(capacity, divisor);
- return (u32)capacity;
+ return capacity;
}
-struct scsi_cmnd;
/* SCp.phase values */
#define AAC_OWNER_MIDLEVEL 0x101
#define AAC_OWNER_LOWLEVEL 0x102
int aac_consumer_get(struct aac_dev * dev, struct aac_queue * q, struct aac_entry **entry);
void aac_consumer_free(struct aac_dev * dev, struct aac_queue * q, u32 qnum);
int aac_fib_complete(struct fib * context);
-#define fib_data(fibctx) ((void *)(fibctx)->hw_fib->data)
+#define fib_data(fibctx) ((void *)(fibctx)->hw_fib_va->data)
struct aac_dev *aac_init_adapter(struct aac_dev *dev);
-int aac_get_config_status(struct aac_dev *dev);
+int aac_get_config_status(struct aac_dev *dev, int commit_flag);
int aac_get_containers(struct aac_dev *dev);
int aac_scsi_cmd(struct scsi_cmnd *cmd);
int aac_dev_ioctl(struct aac_dev *dev, int cmd, void __user *arg);
+#ifndef shost_to_class
+#define shost_to_class(shost) &shost->shost_dev
+#endif
+ssize_t aac_get_serial_number(struct device *dev, char *buf);
int aac_do_ioctl(struct aac_dev * dev, int cmd, void __user *arg);
int aac_rx_init(struct aac_dev *dev);
int aac_rkt_init(struct aac_dev *dev);
+int aac_nark_init(struct aac_dev *dev);
int aac_sa_init(struct aac_dev *dev);
+int aac_queue_get(struct aac_dev * dev, u32 * index, u32 qid, struct hw_fib * hw_fib, int wait, struct fib * fibptr, unsigned long *nonotify);
unsigned int aac_response_normal(struct aac_queue * q);
unsigned int aac_command_normal(struct aac_queue * q);
unsigned int aac_intr_normal(struct aac_dev * dev, u32 Index);
+int aac_reset_adapter(struct aac_dev * dev, int forced);
+int aac_check_health(struct aac_dev * dev);
int aac_command_thread(void *data);
int aac_close_fib_context(struct aac_dev * dev, struct aac_fib_context *fibctx);
int aac_fib_adapter_complete(struct fib * fibptr, unsigned short size);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
int aac_probe_container(struct aac_dev *dev, int cid);
+int _aac_rx_init(struct aac_dev *dev);
+int aac_rx_select_comm(struct aac_dev *dev, int comm);
+int aac_rx_deliver_producer(struct fib * fib);
+char * get_container_type(unsigned type);
extern int numacb;
extern int acbsize;
extern char aac_driver_version[];
+extern int startup_timeout;
+extern int aif_timeout;
+extern int expose_physicals;
+extern int aac_reset_devices;
+extern int aac_msi;
+extern int aac_commit;
+extern int update_interval;
+extern int check_interval;
+extern int aac_check_reset;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff