* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define KMSG_COMPONENT "cio"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/bootmem.h>
#include <linux/device.h>
#include <linux/init.h>
#include "ioasm.h"
#include "chsc.h"
-/* parameter to enable cmf during boot, possible uses are:
+/*
+ * parameter to enable cmf during boot, possible uses are:
* "s390cmf" -- enable cmf and allocate 2 MB of ram so measuring can be
* used on any subchannel
* "s390cmf=<num>" -- enable cmf and allocate enough memory to measure
* enum cmb_format - types of supported measurement block formats
*
* @CMF_BASIC: traditional channel measurement blocks supported
- * by all machines that we run on
+ * by all machines that we run on
* @CMF_EXTENDED: improved format that was introduced with the z990
- * machine
- * @CMF_AUTODETECT: default: use extended format when running on a z990
- * or later machine, otherwise fall back to basic format
- **/
+ * machine
+ * @CMF_AUTODETECT: default: use extended format when running on a machine
+ * supporting extended format, otherwise fall back to
+ * basic format
+ */
enum cmb_format {
CMF_BASIC,
CMF_EXTENDED,
CMF_AUTODETECT = -1,
};
-/**
+
+/*
* format - actual format for all measurement blocks
*
* The format module parameter can be set to a value of 0 (zero)
* either with the help of a special pool or with kmalloc
* @free: free memory allocated with @alloc
* @set: enable or disable measurement
+ * @read: read a measurement entry at an index
* @readall: read a measurement block in a common format
* @reset: clear the data in the associated measurement block and
* reset its time stamp
* @align: align an allocated block so that the hardware can use it
*/
struct cmb_operations {
- int (*alloc) (struct ccw_device*);
- void(*free) (struct ccw_device*);
- int (*set) (struct ccw_device*, u32);
- u64 (*read) (struct ccw_device*, int);
- int (*readall)(struct ccw_device*, struct cmbdata *);
- void (*reset) (struct ccw_device*);
- void * (*align) (void *);
-
+ int (*alloc) (struct ccw_device *);
+ void (*free) (struct ccw_device *);
+ int (*set) (struct ccw_device *, u32);
+ u64 (*read) (struct ccw_device *, int);
+ int (*readall)(struct ccw_device *, struct cmbdata *);
+ void (*reset) (struct ccw_device *);
+ void *(*align) (void *);
+/* private: */
struct attribute_group *attr_group;
};
static struct cmb_operations *cmbops;
unsigned long long last_update; /* when last_block was updated */
};
-/* our user interface is designed in terms of nanoseconds,
+/*
+ * Our user interface is designed in terms of nanoseconds,
* while the hardware measures total times in its own
- * unit.*/
+ * unit.
+ */
static inline u64 time_to_nsec(u32 value)
{
return ((u64)value) * 128000ull;
if (count == 0)
return 0;
- /* value comes in units of 128 µsec */
+ /* value comes in units of 128 µsec */
ret = time_to_nsec(value);
do_div(ret, count);
return ret;
}
-/* activate or deactivate the channel monitor. When area is NULL,
+/*
+ * Activate or deactivate the channel monitor. When area is NULL,
* the monitor is deactivated. The channel monitor needs to
* be active in order to measure subchannels, which also need
- * to be enabled. */
-static inline void
-cmf_activate(void *area, unsigned int onoff)
+ * to be enabled.
+ */
+static inline void cmf_activate(void *area, unsigned int onoff)
{
register void * __gpr2 asm("2");
register long __gpr1 asm("1");
asm("schm" : : "d" (__gpr2), "d" (__gpr1) );
}
-static int
-set_schib(struct ccw_device *cdev, u32 mme, int mbfc, unsigned long address)
+static int set_schib(struct ccw_device *cdev, u32 mme, int mbfc,
+ unsigned long address)
{
- int ret;
- int retry;
struct subchannel *sch;
- struct schib *schib;
sch = to_subchannel(cdev->dev.parent);
- schib = &sch->schib;
- /* msch can silently fail, so do it again if necessary */
- for (retry = 0; retry < 3; retry++) {
- /* prepare schib */
- stsch(sch->schid, schib);
- schib->pmcw.mme = mme;
- schib->pmcw.mbfc = mbfc;
- /* address can be either a block address or a block index */
- if (mbfc)
- schib->mba = address;
- else
- schib->pmcw.mbi = address;
-
- /* try to submit it */
- switch(ret = msch_err(sch->schid, schib)) {
- case 0:
- break;
- case 1:
- case 2: /* in I/O or status pending */
- ret = -EBUSY;
- break;
- case 3: /* subchannel is no longer valid */
- ret = -ENODEV;
- break;
- default: /* msch caught an exception */
- ret = -EINVAL;
- break;
- }
- stsch(sch->schid, schib); /* restore the schib */
- if (ret)
- break;
-
- /* check if it worked */
- if (schib->pmcw.mme == mme &&
- schib->pmcw.mbfc == mbfc &&
- (mbfc ? (schib->mba == address)
- : (schib->pmcw.mbi == address)))
- return 0;
-
- ret = -EINVAL;
- }
+ sch->config.mme = mme;
+ sch->config.mbfc = mbfc;
+ /* address can be either a block address or a block index */
+ if (mbfc)
+ sch->config.mba = address;
+ else
+ sch->config.mbi = address;
- return ret;
+ return cio_commit_config(sch);
}
struct set_schib_struct {
sch = to_subchannel(cdev->dev.parent);
- if (stsch(sch->schid, &sch->schib))
+ if (cio_update_schib(sch))
return -ENODEV;
- if (sch->schib.scsw.fctl & SCSW_FCTL_START_FUNC) {
+ if (scsw_fctl(&sch->schib.scsw) & SCSW_FCTL_START_FUNC) {
/* Don't copy if a start function is in progress. */
- if ((!sch->schib.scsw.actl & SCSW_ACTL_SUSPENDED) &&
- (sch->schib.scsw.actl &
+ if ((!(scsw_actl(&sch->schib.scsw) & SCSW_ACTL_SUSPENDED)) &&
+ (scsw_actl(&sch->schib.scsw) &
(SCSW_ACTL_DEVACT | SCSW_ACTL_SCHACT)) &&
- (!sch->schib.scsw.stctl & SCSW_STCTL_SEC_STATUS))
+ (!(scsw_stctl(&sch->schib.scsw) & SCSW_STCTL_SEC_STATUS)))
return -EBUSY;
}
cmb_data = cdev->private->cmb;
*
* @mem: pointer to CMBs (only in basic measurement mode)
* @list: contains a linked list of all subchannels
+ * @num_channels: number of channels to be measured
* @lock: protect concurrent access to @mem and @list
*/
struct cmb_area {
};
static struct cmb_area cmb_area = {
- .lock = SPIN_LOCK_UNLOCKED,
+ .lock = __SPIN_LOCK_UNLOCKED(cmb_area.lock),
.list = LIST_HEAD_INIT(cmb_area.list),
.num_channels = 1024,
};
-\f
/* ****** old style CMB handling ********/
-/** int maxchannels
- *
+/*
* Basic channel measurement blocks are allocated in one contiguous
* block of memory, which can not be moved as long as any channel
* is active. Therefore, a maximum number of subchannels needs to
* be defined somewhere. This is a module parameter, defaulting to
- * a resonable value of 1024, or 32 kb of memory.
+ * a reasonable value of 1024, or 32 kb of memory.
* Current kernels don't allow kmalloc with more than 128kb, so the
- * maximum is 4096
+ * maximum is 4096.
*/
module_param_named(maxchannels, cmb_area.num_channels, uint, 0444);
/**
* struct cmb - basic channel measurement block
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @reserved: unused in basic measurement mode
+ *
+ * The measurement block as used by the hardware. The fields are described
+ * further in z/Architecture Principles of Operation, chapter 17.
*
- * cmb as used by the hardware the fields are described in z/Architecture
- * Principles of Operation, chapter 17.
- * The area to be a contiguous array and may not be reallocated or freed.
+ * The cmb area made up from these blocks must be a contiguous array and may
+ * not be reallocated or freed.
* Only one cmb area can be present in the system.
*/
struct cmb {
u32 reserved[2];
};
-/* insert a single device into the cmb_area list
- * called with cmb_area.lock held from alloc_cmb
+/*
+ * Insert a single device into the cmb_area list.
+ * Called with cmb_area.lock held from alloc_cmb.
*/
-static inline int alloc_cmb_single (struct ccw_device *cdev,
- struct cmb_data *cmb_data)
+static int alloc_cmb_single(struct ccw_device *cdev,
+ struct cmb_data *cmb_data)
{
struct cmb *cmb;
struct ccw_device_private *node;
goto out;
}
- /* find first unused cmb in cmb_area.mem.
- * this is a little tricky: cmb_area.list
- * remains sorted by ->cmb->hw_data pointers */
+ /*
+ * Find first unused cmb in cmb_area.mem.
+ * This is a little tricky: cmb_area.list
+ * remains sorted by ->cmb->hw_data pointers.
+ */
cmb = cmb_area.mem;
list_for_each_entry(node, &cmb_area.list, cmb_list) {
struct cmb_data *data;
return ret;
}
-static int
-alloc_cmb (struct ccw_device *cdev)
+static int alloc_cmb(struct ccw_device *cdev)
{
int ret;
struct cmb *mem;
return set_schib_wait(cdev, mme, 0, offset);
}
-static u64 read_cmb (struct ccw_device *cdev, int index)
+static u64 read_cmb(struct ccw_device *cdev, int index)
{
struct cmb *cmb;
u32 val;
return ret;
}
-static int readall_cmb (struct ccw_device *cdev, struct cmbdata *data)
+static int readall_cmb(struct ccw_device *cdev, struct cmbdata *data)
{
struct cmb *cmb;
struct cmb_data *cmb_data;
.align = align_cmb,
.attr_group = &cmf_attr_group,
};
-\f
+
/* ******** extended cmb handling ********/
/**
* struct cmbe - extended channel measurement block
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @device_busy_time: time of device busy
+ * @initial_command_response_time: initial command response time
+ * @reserved: unused
*
- * cmb as used by the hardware, may be in any 64 bit physical location,
- * the fields are described in z/Architecture Principles of Operation,
+ * The measurement block as used by the hardware. May be in any 64 bit physical
+ * location.
+ * The fields are described further in z/Architecture Principles of Operation,
* third edition, chapter 17.
*/
struct cmbe {
u32 reserved[7];
};
-/* kmalloc only guarantees 8 byte alignment, but we need cmbe
+/*
+ * kmalloc only guarantees 8 byte alignment, but we need cmbe
* pointers to be naturally aligned. Make sure to allocate
- * enough space for two cmbes */
-static inline struct cmbe* cmbe_align(struct cmbe *c)
+ * enough space for two cmbes.
+ */
+static inline struct cmbe *cmbe_align(struct cmbe *c)
{
unsigned long addr;
addr = ((unsigned long)c + sizeof (struct cmbe) - sizeof(long)) &
return (struct cmbe*)addr;
}
-static int alloc_cmbe (struct ccw_device *cdev)
+static int alloc_cmbe(struct ccw_device *cdev)
{
struct cmbe *cmbe;
struct cmb_data *cmb_data;
return ret;
}
-static void free_cmbe (struct ccw_device *cdev)
+static void free_cmbe(struct ccw_device *cdev)
{
struct cmb_data *cmb_data;
}
-static u64 read_cmbe (struct ccw_device *cdev, int index)
+static u64 read_cmbe(struct ccw_device *cdev, int index)
{
struct cmbe *cmb;
struct cmb_data *cmb_data;
return ret;
}
-static int readall_cmbe (struct ccw_device *cdev, struct cmbdata *data)
+static int readall_cmbe(struct ccw_device *cdev, struct cmbdata *data)
{
struct cmbe *cmb;
struct cmb_data *cmb_data;
.align = align_cmbe,
.attr_group = &cmf_attr_group_ext,
};
-\f
-static ssize_t
-cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx)
+static ssize_t cmb_show_attr(struct device *dev, char *buf, enum cmb_index idx)
{
return sprintf(buf, "%lld\n",
(unsigned long long) cmf_read(to_ccwdev(dev), idx));
}
-static ssize_t
-cmb_show_avg_sample_interval(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_show_avg_sample_interval(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
struct ccw_device *cdev;
long interval;
return sprintf(buf, "%ld\n", interval);
}
-static ssize_t
-cmb_show_avg_utilization(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_show_avg_utilization(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
struct cmbdata data;
u64 utilization;
}
#define cmf_attr(name) \
-static ssize_t show_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
-{ return cmb_show_attr((dev), buf, cmb_ ## name); } \
-static DEVICE_ATTR(name, 0444, show_ ## name, NULL);
+static ssize_t show_##name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ return cmb_show_attr((dev), buf, cmb_##name); } \
+static DEVICE_ATTR(name, 0444, show_##name, NULL);
#define cmf_attr_avg(name) \
-static ssize_t show_avg_ ## name (struct device * dev, struct device_attribute *attr, char * buf) \
-{ return cmb_show_attr((dev), buf, cmb_ ## name); } \
-static DEVICE_ATTR(avg_ ## name, 0444, show_avg_ ## name, NULL);
+static ssize_t show_avg_##name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ return cmb_show_attr((dev), buf, cmb_##name); } \
+static DEVICE_ATTR(avg_##name, 0444, show_avg_##name, NULL);
cmf_attr(ssch_rsch_count);
cmf_attr(sample_count);
cmf_attr_avg(device_busy_time);
cmf_attr_avg(initial_command_response_time);
-static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval, NULL);
+static DEVICE_ATTR(avg_sample_interval, 0444, cmb_show_avg_sample_interval,
+ NULL);
static DEVICE_ATTR(avg_utilization, 0444, cmb_show_avg_utilization, NULL);
static struct attribute *cmf_attributes[] = {
.attrs = cmf_attributes_ext,
};
-static ssize_t cmb_enable_show(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t cmb_enable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%d\n", to_ccwdev(dev)->private->cmb ? 1 : 0);
}
-static ssize_t cmb_enable_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t c)
+static ssize_t cmb_enable_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t c)
{
struct ccw_device *cdev;
int ret;
+ unsigned long val;
+
+ ret = strict_strtoul(buf, 16, &val);
+ if (ret)
+ return ret;
cdev = to_ccwdev(dev);
- switch (buf[0]) {
- case '0':
+ switch (val) {
+ case 0:
ret = disable_cmf(cdev);
- if (ret)
- printk(KERN_INFO "disable_cmf failed (%d)\n", ret);
break;
- case '1':
+ case 1:
ret = enable_cmf(cdev);
- if (ret && ret != -EBUSY)
- printk(KERN_INFO "enable_cmf failed (%d)\n", ret);
break;
}
DEVICE_ATTR(cmb_enable, 0644, cmb_enable_show, cmb_enable_store);
-/* enable_cmf/disable_cmf: module interface for cmf (de)activation */
-int
-enable_cmf(struct ccw_device *cdev)
+int ccw_set_cmf(struct ccw_device *cdev, int enable)
+{
+ return cmbops->set(cdev, enable ? 2 : 0);
+}
+
+/**
+ * enable_cmf() - switch on the channel measurement for a specific device
+ * @cdev: The ccw device to be enabled
+ *
+ * Returns %0 for success or a negative error value.
+ *
+ * Context:
+ * non-atomic
+ */
+int enable_cmf(struct ccw_device *cdev)
{
int ret;
return ret;
}
-int
-disable_cmf(struct ccw_device *cdev)
+/**
+ * disable_cmf() - switch off the channel measurement for a specific device
+ * @cdev: The ccw device to be disabled
+ *
+ * Returns %0 for success or a negative error value.
+ *
+ * Context:
+ * non-atomic
+ */
+int disable_cmf(struct ccw_device *cdev)
{
int ret;
return ret;
}
-u64
-cmf_read(struct ccw_device *cdev, int index)
+/**
+ * cmf_read() - read one value from the current channel measurement block
+ * @cdev: the channel to be read
+ * @index: the index of the value to be read
+ *
+ * Returns the value read or %0 if the value cannot be read.
+ *
+ * Context:
+ * any
+ */
+u64 cmf_read(struct ccw_device *cdev, int index)
{
return cmbops->read(cdev, index);
}
-int
-cmf_readall(struct ccw_device *cdev, struct cmbdata *data)
+/**
+ * cmf_readall() - read the current channel measurement block
+ * @cdev: the channel to be read
+ * @data: a pointer to a data block that will be filled
+ *
+ * Returns %0 on success, a negative error value otherwise.
+ *
+ * Context:
+ * any
+ */
+int cmf_readall(struct ccw_device *cdev, struct cmbdata *data)
{
return cmbops->readall(cdev, data);
}
return cmbops->set(cdev, 2);
}
-static int __init
-init_cmf(void)
+static int __init init_cmf(void)
{
char *format_string;
char *detect_string = "parameter";
- /* We cannot really autoprobe this. If the user did not give a parameter,
- see if we are running on z990 or up, otherwise fall back to basic mode. */
-
+ /*
+ * If the user did not give a parameter, see if we are running on a
+ * machine supporting extended measurement blocks, otherwise fall back
+ * to basic mode.
+ */
if (format == CMF_AUTODETECT) {
- if (!css_characteristics_avail ||
- !css_general_characteristics.ext_mb) {
+ if (!css_general_characteristics.ext_mb) {
format = CMF_BASIC;
} else {
format = CMF_EXTENDED;
case CMF_BASIC:
format_string = "basic";
cmbops = &cmbops_basic;
- if (cmb_area.num_channels > 4096 || cmb_area.num_channels < 1) {
- printk(KERN_ERR "Basic channel measurement facility"
- " can only use 1 to 4096 devices\n"
- KERN_ERR "when the cmf driver is built"
- " as a loadable module\n");
- return 1;
- }
break;
case CMF_EXTENDED:
- format_string = "extended";
+ format_string = "extended";
cmbops = &cmbops_extended;
break;
default:
- printk(KERN_ERR "Invalid format %d for channel "
- "measurement facility\n", format);
return 1;
}
-
- printk(KERN_INFO "Channel measurement facility using %s format (%s)\n",
- format_string, detect_string);
+ pr_info("Channel measurement facility initialized using format "
+ "%s (mode %s)\n", format_string, detect_string);
return 0;
}