#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/slab.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/suspend.h>
+#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
+#include "dummy.h"
+
#define REGULATOR_VERSION "0.5"
static DEFINE_MUTEX(regulator_list_mutex);
static void _notifier_call_chain(struct regulator_dev *rdev,
unsigned long event, void *data);
+static const char *rdev_get_name(struct regulator_dev *rdev)
+{
+ if (rdev->constraints && rdev->constraints->name)
+ return rdev->constraints->name;
+ else if (rdev->desc->name)
+ return rdev->desc->name;
+ else
+ return "";
+}
+
/* gets the regulator for a given consumer device */
static struct regulator *get_device_regulator(struct device *dev)
{
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
- rdev->desc->name);
+ rdev_get_name(rdev));
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
printk(KERN_ERR "%s: operation not allowed for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return -EPERM;
}
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
- rdev->desc->name);
+ rdev_get_name(rdev));
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
printk(KERN_ERR "%s: operation not allowed for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return -EPERM;
}
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
- rdev->desc->name);
+ rdev_get_name(rdev));
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
printk(KERN_ERR "%s: operation not allowed for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return -EPERM;
}
if (!(rdev->constraints->valid_modes_mask & mode)) {
printk(KERN_ERR "%s: invalid mode %x for %s\n",
- __func__, mode, rdev->desc->name);
+ __func__, mode, rdev_get_name(rdev));
return -EINVAL;
}
return 0;
{
if (!rdev->constraints) {
printk(KERN_ERR "%s: no constraints for %s\n", __func__,
- rdev->desc->name);
+ rdev_get_name(rdev));
return -ENODEV;
}
if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
printk(KERN_ERR "%s: operation not allowed for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return -EPERM;
}
return 0;
struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- const char *name;
- if (rdev->constraints && rdev->constraints->name)
- name = rdev->constraints->name;
- else if (rdev->desc->name)
- name = rdev->desc->name;
- else
- name = "";
-
- return sprintf(buf, "%s\n", name);
+ return sprintf(buf, "%s\n", rdev_get_name(rdev));
}
static ssize_t regulator_print_opmode(char *buf, int mode)
mutex_lock(&rdev->mutex);
list_for_each_entry(regulator, &rdev->consumer_list, list)
- uA += regulator->uA_load;
+ uA += regulator->uA_load;
mutex_unlock(&rdev->mutex);
return sprintf(buf, "%d\n", uA);
}
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
- current_uA += sibling->uA_load;
+ current_uA += sibling->uA_load;
/* now get the optimum mode for our new total regulator load */
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
struct regulator_state *rstate)
{
int ret = 0;
+ bool can_set_state;
+
+ can_set_state = rdev->desc->ops->set_suspend_enable &&
+ rdev->desc->ops->set_suspend_disable;
+
+ /* If we have no suspend mode configration don't set anything;
+ * only warn if the driver actually makes the suspend mode
+ * configurable.
+ */
+ if (!rstate->enabled && !rstate->disabled) {
+ if (can_set_state)
+ printk(KERN_WARNING "%s: No configuration for %s\n",
+ __func__, rdev_get_name(rdev));
+ return 0;
+ }
- /* enable & disable are mandatory for suspend control */
- if (!rdev->desc->ops->set_suspend_enable ||
- !rdev->desc->ops->set_suspend_disable) {
+ if (rstate->enabled && rstate->disabled) {
+ printk(KERN_ERR "%s: invalid configuration for %s\n",
+ __func__, rdev_get_name(rdev));
+ return -EINVAL;
+ }
+
+ if (!can_set_state) {
printk(KERN_ERR "%s: no way to set suspend state\n",
__func__);
return -EINVAL;
static void print_constraints(struct regulator_dev *rdev)
{
struct regulation_constraints *constraints = rdev->constraints;
- char buf[80];
- int count;
+ char buf[80] = "";
+ int count = 0;
+ int ret;
- if (rdev->desc->type == REGULATOR_VOLTAGE) {
+ if (constraints->min_uV && constraints->max_uV) {
if (constraints->min_uV == constraints->max_uV)
- count = sprintf(buf, "%d mV ",
- constraints->min_uV / 1000);
+ count += sprintf(buf + count, "%d mV ",
+ constraints->min_uV / 1000);
else
- count = sprintf(buf, "%d <--> %d mV ",
- constraints->min_uV / 1000,
- constraints->max_uV / 1000);
- } else {
+ count += sprintf(buf + count, "%d <--> %d mV ",
+ constraints->min_uV / 1000,
+ constraints->max_uV / 1000);
+ }
+
+ if (!constraints->min_uV ||
+ constraints->min_uV != constraints->max_uV) {
+ ret = _regulator_get_voltage(rdev);
+ if (ret > 0)
+ count += sprintf(buf + count, "at %d mV ", ret / 1000);
+ }
+
+ if (constraints->min_uA && constraints->max_uA) {
if (constraints->min_uA == constraints->max_uA)
- count = sprintf(buf, "%d mA ",
- constraints->min_uA / 1000);
+ count += sprintf(buf + count, "%d mA ",
+ constraints->min_uA / 1000);
else
- count = sprintf(buf, "%d <--> %d mA ",
- constraints->min_uA / 1000,
- constraints->max_uA / 1000);
+ count += sprintf(buf + count, "%d <--> %d mA ",
+ constraints->min_uA / 1000,
+ constraints->max_uA / 1000);
+ }
+
+ if (!constraints->min_uA ||
+ constraints->min_uA != constraints->max_uA) {
+ ret = _regulator_get_current_limit(rdev);
+ if (ret > 0)
+ count += sprintf(buf + count, "at %d uA ", ret / 1000);
}
+
if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
count += sprintf(buf + count, "fast ");
if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
count += sprintf(buf + count, "standby");
- printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
+ printk(KERN_INFO "regulator: %s: %s\n", rdev_get_name(rdev), buf);
}
static int machine_constraints_voltage(struct regulator_dev *rdev,
- const char *name, struct regulation_constraints *constraints)
+ struct regulation_constraints *constraints)
{
struct regulator_ops *ops = rdev->desc->ops;
+ const char *name = rdev_get_name(rdev);
int ret;
/* do we need to apply the constraint voltage */
const char *name;
struct regulator_ops *ops = rdev->desc->ops;
- if (constraints->name)
- name = constraints->name;
- else if (rdev->desc->name)
- name = rdev->desc->name;
- else
- name = "regulator";
-
rdev->constraints = constraints;
- ret = machine_constraints_voltage(rdev, name, constraints);
+ name = rdev_get_name(rdev);
+
+ ret = machine_constraints_voltage(rdev, constraints);
if (ret != 0)
goto out;
dev_name(&node->regulator->dev),
node->regulator->desc->name,
supply,
- dev_name(&rdev->dev), rdev->desc->name);
+ dev_name(&rdev->dev), rdev_get_name(rdev));
return -EBUSY;
}
goto overflow_err;
regulator->dev = dev;
+ sysfs_attr_init(®ulator->dev_attr.attr);
regulator->dev_attr.attr.name = kstrdup(buf, GFP_KERNEL);
if (regulator->dev_attr.attr.name == NULL)
goto attr_name_err;
return NULL;
}
+static int _regulator_get_enable_time(struct regulator_dev *rdev)
+{
+ if (!rdev->desc->ops->enable_time)
+ return 0;
+ return rdev->desc->ops->enable_time(rdev);
+}
+
/* Internal regulator request function */
static struct regulator *_regulator_get(struct device *dev, const char *id,
int exclusive)
goto found;
}
}
+
+#ifdef CONFIG_REGULATOR_DUMMY
+ if (!devname)
+ devname = "deviceless";
+
+ /* If the board didn't flag that it was fully constrained then
+ * substitute in a dummy regulator so consumers can continue.
+ */
+ if (!has_full_constraints) {
+ pr_warning("%s supply %s not found, using dummy regulator\n",
+ devname, id);
+ rdev = dummy_regulator_rdev;
+ goto found;
+ }
+#endif
+
mutex_unlock(®ulator_list_mutex);
return regulator;
/* locks held by regulator_enable() */
static int _regulator_enable(struct regulator_dev *rdev)
{
- int ret;
+ int ret, delay;
/* do we need to enable the supply regulator first */
if (rdev->supply) {
ret = _regulator_enable(rdev->supply);
if (ret < 0) {
printk(KERN_ERR "%s: failed to enable %s: %d\n",
- __func__, rdev->desc->name, ret);
+ __func__, rdev_get_name(rdev), ret);
return ret;
}
}
if (!_regulator_can_change_status(rdev))
return -EPERM;
- if (rdev->desc->ops->enable) {
- ret = rdev->desc->ops->enable(rdev);
- if (ret < 0)
- return ret;
- } else {
+ if (!rdev->desc->ops->enable)
return -EINVAL;
+
+ /* Query before enabling in case configuration
+ * dependant. */
+ ret = _regulator_get_enable_time(rdev);
+ if (ret >= 0) {
+ delay = ret;
+ } else {
+ printk(KERN_WARNING
+ "%s: enable_time() failed for %s: %d\n",
+ __func__, rdev_get_name(rdev),
+ ret);
+ delay = 0;
}
+
+ /* Allow the regulator to ramp; it would be useful
+ * to extend this for bulk operations so that the
+ * regulators can ramp together. */
+ ret = rdev->desc->ops->enable(rdev);
+ if (ret < 0)
+ return ret;
+
+ if (delay >= 1000)
+ mdelay(delay / 1000);
+ else if (delay)
+ udelay(delay);
+
} else if (ret < 0) {
printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
- __func__, rdev->desc->name, ret);
+ __func__, rdev_get_name(rdev), ret);
return ret;
}
/* Fallthrough on positive return values - already enabled */
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n",
- rdev->desc->name))
+ rdev_get_name(rdev)))
return -EIO;
/* are we the last user and permitted to disable ? */
ret = rdev->desc->ops->disable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to disable %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return ret;
}
+
+ _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
+ NULL);
}
/* decrease our supplies ref count and disable if required */
ret = rdev->desc->ops->disable(rdev);
if (ret < 0) {
printk(KERN_ERR "%s: failed to force disable %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
return ret;
}
/* notify other consumers that power has been forced off */
- _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE,
- NULL);
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_DISABLE, NULL);
}
/* decrease our supplies ref count and disable if required */
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
- /* sanity check */
+ /* If we don't know then assume that the regulator is always on */
if (!rdev->desc->ops->is_enabled)
- return -EINVAL;
+ return 1;
return rdev->desc->ops->is_enabled(rdev);
}
output_uV = rdev->desc->ops->get_voltage(rdev);
if (output_uV <= 0) {
printk(KERN_ERR "%s: invalid output voltage found for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
goto out;
}
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
printk(KERN_ERR "%s: invalid input voltage found for %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
goto out;
}
/* calc total requested load for this regulator */
list_for_each_entry(consumer, &rdev->consumer_list, list)
- total_uA_load += consumer->uA_load;
+ total_uA_load += consumer->uA_load;
mode = rdev->desc->ops->get_optimum_mode(rdev,
input_uV, output_uV,
ret = regulator_check_mode(rdev, mode);
if (ret < 0) {
printk(KERN_ERR "%s: failed to get optimum mode for %s @"
- " %d uA %d -> %d uV\n", __func__, rdev->desc->name,
+ " %d uA %d -> %d uV\n", __func__, rdev_get_name(rdev),
total_uA_load, input_uV, output_uV);
goto out;
}
ret = rdev->desc->ops->set_mode(rdev, mode);
if (ret < 0) {
printk(KERN_ERR "%s: failed to set optimum mode %x for %s\n",
- __func__, mode, rdev->desc->name);
+ __func__, mode, rdev_get_name(rdev));
goto out;
}
ret = mode;
/* now notify regulator we supply */
list_for_each_entry(_rdev, &rdev->supply_list, slist) {
- mutex_lock(&_rdev->mutex);
- _notifier_call_chain(_rdev, event, data);
- mutex_unlock(&_rdev->mutex);
+ mutex_lock(&_rdev->mutex);
+ _notifier_call_chain(_rdev, event, data);
+ mutex_unlock(&_rdev->mutex);
}
}
err:
printk(KERN_ERR "Failed to enable %s: %d\n", consumers[i].supply, ret);
- for (i = 0; i < num_consumers; i++)
+ for (--i; i >= 0; --i)
regulator_disable(consumers[i].consumer);
return ret;
err:
printk(KERN_ERR "Failed to disable %s: %d\n", consumers[i].supply,
ret);
- for (i = 0; i < num_consumers; i++)
+ for (--i; i >= 0; --i)
regulator_enable(consumers[i].consumer);
return ret;
if (ret < 0) {
printk(KERN_ERR "%s: failed to prepare %s\n",
- __func__, rdev->desc->name);
+ __func__, rdev_get_name(rdev));
goto out;
}
}
static int __init regulator_init(void)
{
+ int ret;
+
printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);
- return class_register(®ulator_class);
+
+ ret = class_register(®ulator_class);
+
+ regulator_dummy_init();
+
+ return ret;
}
/* init early to allow our consumers to complete system booting */
ops = rdev->desc->ops;
c = rdev->constraints;
- if (c && c->name)
- name = c->name;
- else if (rdev->desc->name)
- name = rdev->desc->name;
- else
- name = "regulator";
+ name = rdev_get_name(rdev);
if (!ops->disable || (c && c->always_on))
continue;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff