#include <linux/dmi.h>
#include <linux/pci-aspm.h>
#include <linux/ioport.h>
+#include <asm/dma.h> /* isa_dma_bridge_buggy */
#include "pci.h"
-int isa_dma_bridge_buggy;
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-int pci_pci_problems;
-EXPORT_SYMBOL(pci_pci_problems);
-int pcie_mch_quirk;
-EXPORT_SYMBOL(pcie_mch_quirk);
-
-#ifdef CONFIG_PCI_QUIRKS
/*
- * This quirk function disables the device and releases resources
- * which is specified by kernel's boot parameter 'pci=resource_alignment='.
+ * This quirk function disables memory decoding and releases memory resources
+ * of the device specified by kernel's boot parameter 'pci=resource_alignment='.
* It also rounds up size to specified alignment.
* Later on, the kernel will assign page-aligned memory resource back
- * to that device.
+ * to the device.
*/
static void __devinit quirk_resource_alignment(struct pci_dev *dev)
{
int i;
struct resource *r;
resource_size_t align, size;
+ u16 command;
if (!pci_is_reassigndev(dev))
return;
return;
}
- dev_info(&dev->dev, "Disabling device and release resources.\n");
- pci_disable_device(dev);
+ dev_info(&dev->dev,
+ "Disabling memory decoding and releasing memory resources.\n");
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ command &= ~PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, command);
align = pci_specified_resource_alignment(dev);
for (i=0; i < PCI_BRIDGE_RESOURCES; i++) {
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M);
+/*
+ * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS
+ * ver. 1.33 20070103) don't set the correct ISA PCI region header info.
+ * BAR0 should be 8 bytes; instead, it may be set to something like 8k
+ * (which conflicts w/ BAR1's memory range).
+ */
+static void __devinit quirk_cs5536_vsa(struct pci_dev *dev)
+{
+ if (pci_resource_len(dev, 0) != 8) {
+ struct resource *res = &dev->resource[0];
+ res->end = res->start + 8 - 1;
+ dev_info(&dev->dev, "CS5536 ISA bridge bug detected "
+ "(incorrect header); workaround applied.\n");
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa);
+
static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region,
unsigned size, int nr, const char *name)
{
pcibios_bus_to_resource(dev, res, &bus_region);
pci_claim_resource(dev, nr);
- dev_info(&dev->dev, "quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name);
+ dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name);
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ * Disable fast back-to-back on the secondary bus segment
+ */
+static void __devinit quirk_xio2000a(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 command;
+
+ dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
+ "secondary bus fast back-to-back transfers disabled\n");
+ list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_FAST_BACK)
+ pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+ quirk_xio2000a);
#ifdef CONFIG_X86_IO_APIC
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set sb600/sb700/sb800 sata to ahci mode */
+ /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, quirk_no_ata_d3);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, quirk_no_ata_d3);
+/* ALi loses some register settings that we cannot then restore */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, quirk_no_ata_d3);
+/* VIA comes back fine but we need to keep it alive or ACPI GTM failures
+ occur when mode detecting */
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_no_ata_d3);
/* This was originally an Alpha specific thing, but it really fits here.
* The i82375 PCI/EISA bridge appears as non-classified. Fix that.
switch (dev->subsystem_device) {
case 0x1751: /* M2N notebook */
case 0x1821: /* M5N notebook */
+ case 0x1897: /* A6L notebook */
asus_hides_smbus = 1;
}
else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch (dev->subsystem_device) {
case 0x12bc: /* HP D330L */
case 0x12bd: /* HP D530 */
+ case 0x006a: /* HP Compaq nx9500 */
asus_hides_smbus = 1;
}
else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB)
switch(dev->subsystem_device) {
case 0x00b8: /* Compaq Evo D510 CMT */
case 0x00b9: /* Compaq Evo D510 SFF */
+ case 0x00ba: /* Compaq Evo D510 USDT */
/* Motherboard doesn't have Host bridge
* subvendor/subdevice IDs and on-board VGA
* controller is disabled if an AGP card is
static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
{
- pcie_mch_quirk = 1;
+ pci_msi_off(pdev);
+ pdev->no_msi = 1;
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch);
return;
dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT;
-
- printk(KERN_INFO "PCI quirk: reroute interrupts for 0x%04x:0x%04x\n",
- dev->vendor, dev->device);
- return;
+ dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n",
+ dev->vendor, dev->device);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel);
pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ;
pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word);
- printk(KERN_INFO "disabled boot interrupt on device 0x%04x:0x%04x\n",
- dev->vendor, dev->device);
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt);
pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword);
- printk(KERN_INFO "disabled boot interrupts on PCI device"
- "0x%04x:0x%04x\n", dev->vendor, dev->device);
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt);
*/
#define AMD_813X_MISC 0x40
#define AMD_813X_NOIOAMODE (1<<0)
+#define AMD_813X_REV_B1 0x12
#define AMD_813X_REV_B2 0x13
static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev)
if (noioapicquirk)
return;
- if (dev->revision == AMD_813X_REV_B2)
+ if ((dev->revision == AMD_813X_REV_B1) ||
+ (dev->revision == AMD_813X_REV_B2))
return;
pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword);
pci_config_dword &= ~AMD_813X_NOIOAMODE;
pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword);
- printk(KERN_INFO "disabled boot interrupts on PCI device "
- "0x%04x:0x%04x\n", dev->vendor, dev->device);
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt);
#define AMD_8111_PCI_IRQ_ROUTING 0x56
pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word);
if (!pci_config_word) {
- printk(KERN_INFO "boot interrupts on PCI device 0x%04x:0x%04x "
- "already disabled\n",
- dev->vendor, dev->device);
+ dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] "
+ "already disabled\n", dev->vendor, dev->device);
return;
}
pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0);
- printk(KERN_INFO "disabled boot interrupts on PCI device "
- "0x%04x:0x%04x\n", dev->vendor, dev->device);
+ dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n",
+ dev->vendor, dev->device);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt);
PCI_DEVICE_ID_NX2_5709S,
quirk_brcm_570x_limit_vpd);
+/* Originally in EDAC sources for i82875P:
+ * Intel tells BIOS developers to hide device 6 which
+ * configures the overflow device access containing
+ * the DRBs - this is where we expose device 6.
+ * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm
+ */
+static void __devinit quirk_unhide_mch_dev6(struct pci_dev *dev)
+{
+ u8 reg;
+
+ if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) {
+ dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n");
+ pci_write_config_byte(dev, 0xF4, reg | 0x02);
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
+ quirk_unhide_mch_dev6);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
+ quirk_unhide_mch_dev6);
+
+
#ifdef CONFIG_PCI_MSI
/* Some chipsets do not support MSI. We cannot easily rely on setting
* PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
static void __devinit quirk_disable_msi(struct pci_dev *dev)
PCI_DEVICE_ID_NVIDIA_NVENET_15,
nvenet_msi_disable);
+static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
+{
+ int pos, ttl = 48;
+ int found = 0;
+
+ /* check if there is HT MSI cap or enabled on this device */
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
+ while (pos && ttl--) {
+ u8 flags;
+
+ if (found < 1)
+ found = 1;
+ if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
+ &flags) == 0) {
+ if (flags & HT_MSI_FLAGS_ENABLE) {
+ if (found < 2) {
+ found = 2;
+ break;
+ }
+ }
+ }
+ pos = pci_find_next_ht_capability(dev, pos,
+ HT_CAPTYPE_MSI_MAPPING);
+ }
+
+ return found;
+}
+
+static int __devinit host_bridge_with_leaf(struct pci_dev *host_bridge)
+{
+ struct pci_dev *dev;
+ int pos;
+ int i, dev_no;
+ int found = 0;
+
+ dev_no = host_bridge->devfn >> 3;
+ for (i = dev_no + 1; i < 0x20; i++) {
+ dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0));
+ if (!dev)
+ continue;
+
+ /* found next host bridge ?*/
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+ if (pos != 0) {
+ pci_dev_put(dev);
+ break;
+ }
+
+ if (ht_check_msi_mapping(dev)) {
+ found = 1;
+ pci_dev_put(dev);
+ break;
+ }
+ pci_dev_put(dev);
+ }
+
+ return found;
+}
+
+#define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */
+#define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */
+
+static int __devinit is_end_of_ht_chain(struct pci_dev *dev)
+{
+ int pos, ctrl_off;
+ int end = 0;
+ u16 flags, ctrl;
+
+ pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE);
+
+ if (!pos)
+ goto out;
+
+ pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags);
+
+ ctrl_off = ((flags >> 10) & 1) ?
+ PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1;
+ pci_read_config_word(dev, pos + ctrl_off, &ctrl);
+
+ if (ctrl & (1 << 6))
+ end = 1;
+
+out:
+ return end;
+}
+
static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev)
{
struct pci_dev *host_bridge;
if (!found)
return;
+ /* don't enable end_device/host_bridge with leaf directly here */
+ if (host_bridge == dev && is_end_of_ht_chain(host_bridge) &&
+ host_bridge_with_leaf(host_bridge))
+ goto out;
+
/* root did that ! */
if (msi_ht_cap_enabled(host_bridge))
goto out;
}
}
-static int __devinit ht_check_msi_mapping(struct pci_dev *dev)
-{
- int pos, ttl = 48;
- int found = 0;
-
- /* check if there is HT MSI cap or enabled on this device */
- pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING);
- while (pos && ttl--) {
- u8 flags;
-
- if (found < 1)
- found = 1;
- if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS,
- &flags) == 0) {
- if (flags & HT_MSI_FLAGS_ENABLE) {
- if (found < 2) {
- found = 2;
- break;
- }
- }
- }
- pos = pci_find_next_ht_capability(dev, pos,
- HT_CAPTYPE_MSI_MAPPING);
- }
-
- return found;
-}
-
-static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev)
+static void __devinit __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all)
{
struct pci_dev *host_bridge;
int pos;
int found;
- /* Enabling HT MSI mapping on this device breaks MCP51 */
- if (dev->device == 0x270)
- return;
-
/* check if there is HT MSI cap or enabled on this device */
found = ht_check_msi_mapping(dev);
/* Host bridge is to HT */
if (found == 1) {
/* it is not enabled, try to enable it */
- nv_ht_enable_msi_mapping(dev);
+ if (all)
+ ht_enable_msi_mapping(dev);
+ else
+ nv_ht_enable_msi_mapping(dev);
}
return;
}
/* Host bridge is not to HT, disable HT MSI mapping on this device */
ht_disable_msi_mapping(dev);
}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
+
+static void __devinit nv_msi_ht_cap_quirk_all(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 1);
+}
+
+static void __devinit nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev)
+{
+ return __nv_msi_ht_cap_quirk(dev, 0);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all);
static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
{
#endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PCI_IOV
+
+/*
+ * For Intel 82576 SR-IOV NIC, if BIOS doesn't allocate resources for the
+ * SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the
+ * old Flash Memory Space.
+ */
+static void __devinit quirk_i82576_sriov(struct pci_dev *dev)
+{
+ int pos, flags;
+ u32 bar, start, size;
+
+ if (PAGE_SIZE > 0x10000)
+ return;
+
+ flags = pci_resource_flags(dev, 0);
+ if ((flags & PCI_BASE_ADDRESS_SPACE) !=
+ PCI_BASE_ADDRESS_SPACE_MEMORY ||
+ (flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) !=
+ PCI_BASE_ADDRESS_MEM_TYPE_32)
+ return;
+
+ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
+ if (!pos)
+ return;
+
+ pci_read_config_dword(dev, pos + PCI_SRIOV_BAR, &bar);
+ if (bar & PCI_BASE_ADDRESS_MEM_MASK)
+ return;
+
+ start = pci_resource_start(dev, 1);
+ size = pci_resource_len(dev, 1);
+ if (!start || size != 0x400000 || start & (size - 1))
+ return;
+
+ pci_resource_flags(dev, 1) = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_BAR, start);
+ pci_write_config_dword(dev, pos + PCI_SRIOV_BAR + 12, start + size / 2);
+
+ dev_info(&dev->dev, "use Flash Memory Space for SR-IOV BARs\n");
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+
+#endif /* CONFIG_PCI_IOV */
+
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
}
pci_do_fixups(dev, start, end);
}
-#else
-void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
-#endif
EXPORT_SYMBOL(pci_fixup_device);
+
+static int __init pci_apply_final_quirks(void)
+{
+ struct pci_dev *dev = NULL;
+ u8 cls = 0;
+ u8 tmp;
+
+ if (pci_cache_line_size)
+ printk(KERN_DEBUG "PCI: CLS %u bytes\n",
+ pci_cache_line_size << 2);
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_fixup_device(pci_fixup_final, dev);
+ /*
+ * If arch hasn't set it explicitly yet, use the CLS
+ * value shared by all PCI devices. If there's a
+ * mismatch, fall back to the default value.
+ */
+ if (!pci_cache_line_size) {
+ pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp);
+ if (!cls)
+ cls = tmp;
+ if (!tmp || cls == tmp)
+ continue;
+
+ printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), "
+ "using %u bytes\n", cls << 2, tmp << 2,
+ pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = pci_dfl_cache_line_size;
+ }
+ }
+ if (!pci_cache_line_size) {
+ printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n",
+ cls << 2, pci_dfl_cache_line_size << 2);
+ pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size;
+ }
+
+ return 0;
+}
+
+fs_initcall_sync(pci_apply_final_quirks);
+
+/*
+ * Followings are device-specific reset methods which can be used to
+ * reset a single function if other methods (e.g. FLR, PM D0->D3) are
+ * not available.
+ */
+static int reset_intel_generic_dev(struct pci_dev *dev, int probe)
+{
+ int pos;
+
+ /* only implement PCI_CLASS_SERIAL_USB at present */
+ if (dev->class == PCI_CLASS_SERIAL_USB) {
+ pos = pci_find_capability(dev, PCI_CAP_ID_VNDR);
+ if (!pos)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_write_config_byte(dev, pos + 0x4, 1);
+ msleep(100);
+
+ return 0;
+ } else {
+ return -ENOTTY;
+ }
+}
+
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
+{
+ int pos;
+
+ pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!pos)
+ return -ENOTTY;
+
+ if (probe)
+ return 0;
+
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
+ PCI_EXP_DEVCTL_BCR_FLR);
+ msleep(100);
+
+ return 0;
+}
+
+#define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed
+
+static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
+ reset_intel_82599_sfp_virtfn },
+ { PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
+ reset_intel_generic_dev },
+ { 0 }
+};
+
+int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+{
+ const struct pci_dev_reset_methods *i;
+
+ for (i = pci_dev_reset_methods; i->reset; i++) {
+ if ((i->vendor == dev->vendor ||
+ i->vendor == (u16)PCI_ANY_ID) &&
+ (i->device == dev->device ||
+ i->device == (u16)PCI_ANY_ID))
+ return i->reset(dev, probe);
+ }
+
+ return -ENOTTY;
+}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff