static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
{
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
struct rtl8180_priv *priv = dev->priv;
struct rtl8180_tx_ring *ring;
struct rtl8180_tx_desc *entry;
}
spin_lock_irqsave(&priv->lock, flags);
+
+ if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ priv->seqno += 0x10;
+ hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
+ hdr->seq_ctrl |= cpu_to_le16(priv->seqno);
+ }
+
idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries;
entry = &ring->desc[idx];
__skb_queue_tail(&ring->queue, skb);
if (ring->entries - skb_queue_len(&ring->queue) < 2)
ieee80211_stop_queue(dev, prio);
+
spin_unlock_irqrestore(&priv->lock, flags);
rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4)));
rtl8180_free_tx_ring(dev, i);
}
+static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
+{
+ struct rtl8180_priv *priv = dev->priv;
+
+ return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
+ (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
+}
+
+void rtl8180_beacon_work(struct work_struct *work)
+{
+ struct rtl8180_vif *vif_priv =
+ container_of(work, struct rtl8180_vif, beacon_work.work);
+ struct ieee80211_vif *vif =
+ container_of((void *)vif_priv, struct ieee80211_vif, drv_priv);
+ struct ieee80211_hw *dev = vif_priv->dev;
+ struct ieee80211_mgmt *mgmt;
+ struct sk_buff *skb;
+ int err = 0;
+
+ /* don't overflow the tx ring */
+ if (ieee80211_queue_stopped(dev, 0))
+ goto resched;
+
+ /* grab a fresh beacon */
+ skb = ieee80211_beacon_get(dev, vif);
+
+ /*
+ * update beacon timestamp w/ TSF value
+ * TODO: make hardware update beacon timestamp
+ */
+ mgmt = (struct ieee80211_mgmt *)skb->data;
+ mgmt->u.beacon.timestamp = cpu_to_le64(rtl8180_get_tsf(dev));
+
+ /* TODO: use actual beacon queue */
+ skb_set_queue_mapping(skb, 0);
+
+ err = rtl8180_tx(dev, skb);
+ WARN_ON(err);
+
+resched:
+ /*
+ * schedule next beacon
+ * TODO: use hardware support for beacon timing
+ */
+ schedule_delayed_work(&vif_priv->beacon_work,
+ usecs_to_jiffies(1024 * vif->bss_conf.beacon_int));
+}
+
static int rtl8180_add_interface(struct ieee80211_hw *dev,
struct ieee80211_vif *vif)
{
struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_vif *vif_priv;
/*
* We only support one active interface at a time.
switch (vif->type) {
case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
break;
default:
return -EOPNOTSUPP;
priv->vif = vif;
+ /* Initialize driver private area */
+ vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+ vif_priv->dev = dev;
+ INIT_DELAYED_WORK(&vif_priv->beacon_work, rtl8180_beacon_work);
+ vif_priv->enable_beacon = false;
+
rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
rtl818x_iowrite32(priv, (__le32 __iomem *)&priv->map->MAC[0],
le32_to_cpu(*(__le32 *)vif->addr));
u32 changed)
{
struct rtl8180_priv *priv = dev->priv;
+ struct rtl8180_vif *vif_priv;
int i;
+ vif_priv = (struct rtl8180_vif *)&vif->drv_priv;
+
if (changed & BSS_CHANGED_BSSID) {
for (i = 0; i < ETH_ALEN; i++)
rtl818x_iowrite8(priv, &priv->map->BSSID[i],
}
if (changed & BSS_CHANGED_ERP_SLOT && priv->rf->conf_erp)
- priv->rf->conf_erp(dev, info);
+ priv->rf->conf_erp(dev, info);
+
+ if (changed & BSS_CHANGED_BEACON_ENABLED)
+ vif_priv->enable_beacon = info->enable_beacon;
+
+ if (changed & (BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_BEACON)) {
+ cancel_delayed_work_sync(&vif_priv->beacon_work);
+ if (vif_priv->enable_beacon)
+ schedule_work(&vif_priv->beacon_work.work);
+ }
}
static u64 rtl8180_prepare_multicast(struct ieee80211_hw *dev, int mc_count,
rtl818x_iowrite32(priv, &priv->map->RX_CONF, priv->rx_conf);
}
-static u64 rtl8180_get_tsf(struct ieee80211_hw *dev)
-{
- struct rtl8180_priv *priv = dev->priv;
-
- return rtl818x_ioread32(priv, &priv->map->TSFT[0]) |
- (u64)(rtl818x_ioread32(priv, &priv->map->TSFT[1])) << 32;
-}
-
static const struct ieee80211_ops rtl8180_ops = {
.tx = rtl8180_tx,
.start = rtl8180_start,
const char *chip_name, *rf_name = NULL;
u32 reg;
u16 eeprom_val;
+ u8 mac_addr[ETH_ALEN];
err = pci_enable_device(pdev);
if (err) {
dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_SIGNAL_UNSPEC;
- dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ dev->vif_data_size = sizeof(struct rtl8180_vif);
+ dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
dev->queues = 1;
dev->max_signal = 65;
eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam);
}
- eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3);
- if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+ eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3);
+ if (!is_valid_ether_addr(mac_addr)) {
printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
" randomly generated MAC addr\n", pci_name(pdev));
- random_ether_addr(dev->wiphy->perm_addr);
+ random_ether_addr(mac_addr);
}
+ SET_IEEE80211_PERM_ADDR(dev, mac_addr);
/* CCK TX power */
for (i = 0; i < 14; i += 2) {
}
printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n",
- wiphy_name(dev->wiphy), dev->wiphy->perm_addr,
+ wiphy_name(dev->wiphy), mac_addr,
chip_name, priv->rf->name);
return 0;
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff