Merge branch 'for-next' into for-linus

[safe/jmp/linux-2.6] / drivers / net / wireless / rt2x00 / rt2500usb.c

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 486c935..9b04964 100644 (file)
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -565,8 +565,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
        /*
         * RT2525E and RT5222 need to flip TX I/Q
         */
-       if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
-           rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+       if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
                rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
                rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
                rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
@@ -574,7 +573,7 @@ static void rt2500usb_config_ant(struct rt2x00_dev *rt2x00dev,
                /*
                 * RT2525E does not need RX I/Q Flip.
                 */
-               if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+               if (rt2x00_rf(rt2x00dev, RF2525E))
                        rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
        } else {
                rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
@@ -598,7 +597,7 @@ static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
        /*
         * For RT2525E we should first set the channel to half band higher.
         */
-       if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+       if (rt2x00_rf(rt2x00dev, RF2525E)) {
                static const u32 vals[] = {
                        0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
                        0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
@@ -793,7 +792,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
        rt2x00_set_field16(&reg, MAC_CSR1_HOST_READY, 1);
        rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
 
-       if (rt2x00_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
+       if (rt2x00_rev(rt2x00dev) >= RT2570_VERSION_C) {
                rt2500usb_register_read(rt2x00dev, PHY_CSR2, &reg);
                rt2x00_set_field16(&reg, PHY_CSR2_LNA, 0);
        } else {
@@ -1409,21 +1408,18 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
        value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
        rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
        rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
-       rt2x00_print_chip(rt2x00dev);
-
-       if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
-           rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
 
+       if (((reg & 0xfff0) != 0) || ((reg & 0x0000000f) == 0)) {
                ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
                return -ENODEV;
        }
 
-       if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
-           !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
-           !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
-           !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
-           !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
-           !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+       if (!rt2x00_rf(rt2x00dev, RF2522) &&
+           !rt2x00_rf(rt2x00dev, RF2523) &&
+           !rt2x00_rf(rt2x00dev, RF2524) &&
+           !rt2x00_rf(rt2x00dev, RF2525) &&
+           !rt2x00_rf(rt2x00dev, RF2525E) &&
+           !rt2x00_rf(rt2x00dev, RF5222)) {
                ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
                return -ENODEV;
        }
@@ -1667,22 +1663,22 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
        spec->supported_bands = SUPPORT_BAND_2GHZ;
        spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
 
-       if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+       if (rt2x00_rf(rt2x00dev, RF2522)) {
                spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
                spec->channels = rf_vals_bg_2522;
-       } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+       } else if (rt2x00_rf(rt2x00dev, RF2523)) {
                spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
                spec->channels = rf_vals_bg_2523;
-       } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+       } else if (rt2x00_rf(rt2x00dev, RF2524)) {
                spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
                spec->channels = rf_vals_bg_2524;
-       } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+       } else if (rt2x00_rf(rt2x00dev, RF2525)) {
                spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
                spec->channels = rf_vals_bg_2525;
-       } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+       } else if (rt2x00_rf(rt2x00dev, RF2525E)) {
                spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
                spec->channels = rf_vals_bg_2525e;
-       } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+       } else if (rt2x00_rf(rt2x00dev, RF5222)) {
                spec->supported_bands |= SUPPORT_BAND_5GHZ;
                spec->num_channels = ARRAY_SIZE(rf_vals_5222);
                spec->channels = rf_vals_5222;
@@ -1763,7 +1759,6 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
        .get_stats              = rt2x00mac_get_stats,
        .bss_info_changed       = rt2x00mac_bss_info_changed,
        .conf_tx                = rt2x00mac_conf_tx,
-       .get_tx_stats           = rt2x00mac_get_tx_stats,
        .rfkill_poll            = rt2x00mac_rfkill_poll,
 };