/* If station is WEP enabled, send the
* command to set WEP in firmware
*/
- if (adapter->secinfo.WEPstatus ==
- wlan802_11WEPenabled) {
+ if (adapter->secinfo.wep_enabled) {
lbs_pr_debug(1, "set_freq: WEP enabled\n");
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_set_wep,
break;
}
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
- || adapter->secinfo.WPAenabled || adapter->secinfo.WPA2enabled) {
+ if ( adapter->secinfo.wep_enabled
+ || adapter->secinfo.WPAenabled
+ || adapter->secinfo.WPA2enabled) {
dwrq->flags &= ~IW_ENCODE_DISABLED;
} else {
dwrq->flags |= IW_ENCODE_DISABLED;
if (index < 0)
index = adapter->wep_tx_keyidx;
- if ((adapter->wep_keys[index].len) &&
- (adapter->secinfo.WEPstatus == wlan802_11WEPenabled)) {
+ if ((adapter->wep_keys[index].len) && adapter->secinfo.wep_enabled) {
memcpy(extra, adapter->wep_keys[index].key,
adapter->wep_keys[index].len);
dwrq->length = adapter->wep_keys[index].len;
assoc_req->wep_tx_keyidx = index;
}
- assoc_req->secinfo.WEPstatus = wlan802_11WEPenabled;
+ assoc_req->secinfo.wep_enabled = 1;
LEAVE();
return 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
/* Clear WEP keys and mark WEP as disabled */
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
for (i = 0; i < 4; i++)
assoc_req->wep_keys[i].len = 0;
/* If WEP isn't enabled, or if there is no key data but a valid
* index, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
- || (dwrq->length == 0 && !is_default))
+ if (!assoc_req->secinfo.wep_enabled || (dwrq->length == 0 && !is_default))
set_tx_key = 1;
ret = wlan_set_wep_key(assoc_req, extra, dwrq->length, index, set_tx_key);
dwrq->flags = index + 1;
memset(ext, 0, sizeof(*ext));
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled)
- && !adapter->secinfo.WPAenabled && !adapter->secinfo.WPA2enabled) {
+ if ( !adapter->secinfo.wep_enabled
+ && !adapter->secinfo.WPAenabled
+ && !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_NONE;
ext->key_len = 0;
dwrq->flags |= IW_ENCODE_DISABLED;
} else {
u8 *key = NULL;
- if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
+ if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_WEP;
ext->key_len = adapter->wep_keys[index].len;
key = &adapter->wep_keys[index].key[0];
- } else if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled) &&
- (adapter->secinfo.WPAenabled ||
- adapter->secinfo.WPA2enabled)) {
+ } else if ( !adapter->secinfo.wep_enabled
+ && (adapter->secinfo.WPAenabled ||
+ adapter->secinfo.WPA2enabled)) {
/* WPA */
ext->alg = IW_ENCODE_ALG_TKIP;
ext->key_len = 0;
/* If WEP isn't enabled, or if there is no key data but a valid
* index, or if the set-TX-key flag was passed, set the TX key.
*/
- if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
+ if ( !assoc_req->secinfo.wep_enabled
|| (dwrq->length == 0 && !is_default)
|| (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY))
set_tx_key = 1;
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA) {
assoc_req->secinfo.WPAenabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA2) {
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
updated = 1;
!assoc_req->secinfo.WPA2enabled) {
assoc_req->secinfo.WPAenabled = 1;
assoc_req->secinfo.WPA2enabled = 1;
- assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
+ assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
} else {