iwlwifi: set hw parameters based on device type

[safe/jmp/linux-2.6] / drivers / net / wireless / iwlwifi / iwl-5000.c

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index e434936..115d3ea 100644 (file)
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -200,26 +200,57 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 
        /* Set initial sensitivity parameters */
        /* Set initial calibration set */
-       switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-       case CSR_HW_REV_TYPE_5150:
-               priv->hw_params.sens = &iwl5150_sensitivity;
-               priv->hw_params.calib_init_cfg =
-                       BIT(IWL_CALIB_DC)               |
-                       BIT(IWL_CALIB_LO)               |
-                       BIT(IWL_CALIB_TX_IQ)            |
-                       BIT(IWL_CALIB_BASE_BAND);
-
-               break;
-       default:
-               priv->hw_params.sens = &iwl5000_sensitivity;
-               priv->hw_params.calib_init_cfg =
-                       BIT(IWL_CALIB_XTAL)             |
-                       BIT(IWL_CALIB_LO)               |
-                       BIT(IWL_CALIB_TX_IQ)            |
-                       BIT(IWL_CALIB_TX_IQ_PERD)       |
-                       BIT(IWL_CALIB_BASE_BAND);
-               break;
-       }
+       priv->hw_params.sens = &iwl5000_sensitivity;
+       priv->hw_params.calib_init_cfg =
+               BIT(IWL_CALIB_XTAL)             |
+               BIT(IWL_CALIB_LO)               |
+               BIT(IWL_CALIB_TX_IQ)            |
+               BIT(IWL_CALIB_TX_IQ_PERD)       |
+               BIT(IWL_CALIB_BASE_BAND);
+
+       return 0;
+}
+
+static int iwl5150_hw_set_hw_params(struct iwl_priv *priv)
+{
+       if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+           priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
+               priv->cfg->num_of_queues =
+                       priv->cfg->mod_params->num_of_queues;
+
+       priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+       priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+       priv->hw_params.scd_bc_tbls_size =
+                       priv->cfg->num_of_queues *
+                       sizeof(struct iwlagn_scd_bc_tbl);
+       priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+       priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+       priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+       priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE;
+       priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE;
+
+       priv->hw_params.max_bsm_size = 0;
+       priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+                                       BIT(IEEE80211_BAND_5GHZ);
+       priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+       priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+       priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+       priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+       priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+       if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+               priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+       /* Set initial sensitivity parameters */
+       /* Set initial calibration set */
+       priv->hw_params.sens = &iwl5150_sensitivity;
+       priv->hw_params.calib_init_cfg =
+               BIT(IWL_CALIB_DC)               |
+               BIT(IWL_CALIB_LO)               |
+               BIT(IWL_CALIB_TX_IQ)            |
+               BIT(IWL_CALIB_BASE_BAND);
 
        return 0;
 }
@@ -332,7 +363,7 @@ static struct iwl_lib_ops iwl5000_lib = {
 };
 
 static struct iwl_lib_ops iwl5150_lib = {
-       .set_hw_params = iwl5000_hw_set_hw_params,
+       .set_hw_params = iwl5150_hw_set_hw_params,
        .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
        .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
        .txq_set_sched = iwlagn_txq_set_sched,