u8 wait_reset; /* Hardware failed, need to reset */
struct timer_list timer;
- /* System defined statistic counter */
- struct net_device_stats stats;
-
/* Driver defined statistic counter */
unsigned long tx_fifo_underrun;
unsigned long tx_loss_carrier;
/* Global variable declaration ----------------------------- */
static int __devinitdata printed_version;
-static char version[] __devinitdata =
+static const char version[] __devinitconst =
KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
DRV_VERSION " (" DRV_RELDATE ")\n";
/* function declaration ------------------------------------- */
static int uli526x_open(struct net_device *);
-static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *,
+ struct net_device *);
static int uli526x_stop(struct net_device *);
-static struct net_device_stats * uli526x_get_stats(struct net_device *);
static void uli526x_set_filter_mode(struct net_device *);
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
/* ULI526X network board routine ---------------------------- */
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = uli526x_open,
+ .ndo_stop = uli526x_stop,
+ .ndo_start_xmit = uli526x_start_xmit,
+ .ndo_set_multicast_list = uli526x_set_filter_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = uli526x_poll,
+#endif
+};
+
/*
* Search ULI526X board, allocate space and register it
*/
return -ENOMEM;
SET_NETDEV_DEV(dev, &pdev->dev);
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
err = -ENODEV;
goto err_out_free;
pci_set_drvdata(pdev, dev);
/* Register some necessary functions */
- dev->open = &uli526x_open;
- dev->hard_start_xmit = &uli526x_start_xmit;
- dev->stop = &uli526x_stop;
- dev->get_stats = &uli526x_get_stats;
- dev->set_multicast_list = &uli526x_set_filter_mode;
+ dev->netdev_ops = &netdev_ops;
dev->ethtool_ops = &netdev_ethtool_ops;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = &uli526x_poll;
-#endif
+
spin_lock_init(&db->lock);
/* Initialize ULI526X board */
uli526x_init(dev);
- ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
+ ret = request_irq(dev->irq, uli526x_interrupt, IRQF_SHARED, dev->name, dev);
if (ret)
return ret;
* Send a packet to media from the upper layer.
*/
-static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t uli526x_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
{
struct uli526x_board_info *db = netdev_priv(dev);
struct tx_desc *txptr;
if (skb->len > MAX_PACKET_SIZE) {
printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&db->lock, flags);
if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
spin_unlock_irqrestore(&db->lock, flags);
printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
- return 1;
+ return NETDEV_TX_BUSY;
}
/* Disable NIC interrupt */
/* free this SKB */
dev_kfree_skb(skb);
- return 0;
+ return NETDEV_TX_OK;
}
* Free TX resource after TX complete
*/
-static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
+static void uli526x_free_tx_pkt(struct net_device *dev,
+ struct uli526x_board_info * db)
{
struct tx_desc *txptr;
u32 tdes0;
/* A packet sent completed */
db->tx_packet_cnt--;
- db->stats.tx_packets++;
+ dev->stats.tx_packets++;
/* Transmit statistic counter */
if ( tdes0 != 0x7fffffff ) {
/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
- db->stats.collisions += (tdes0 >> 3) & 0xf;
- db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+ dev->stats.collisions += (tdes0 >> 3) & 0xf;
+ dev->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
if (tdes0 & TDES0_ERR_MASK) {
- db->stats.tx_errors++;
+ dev->stats.tx_errors++;
if (tdes0 & 0x0002) { /* UnderRun */
db->tx_fifo_underrun++;
if ( !(db->cr6_data & CR6_SFT) ) {
if (rdes0 & 0x8000) {
/* This is a error packet */
//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
- db->stats.rx_errors++;
+ dev->stats.rx_errors++;
if (rdes0 & 1)
- db->stats.rx_fifo_errors++;
+ dev->stats.rx_fifo_errors++;
if (rdes0 & 2)
- db->stats.rx_crc_errors++;
+ dev->stats.rx_crc_errors++;
if (rdes0 & 0x80)
- db->stats.rx_length_errors++;
+ dev->stats.rx_length_errors++;
}
if ( !(rdes0 & 0x8000) ||
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
- db->stats.rx_packets++;
- db->stats.rx_bytes += rxlen;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += rxlen;
} else {
/* Reuse SKB buffer when the packet is error */
/*
- * Get statistics from driver.
- */
-
-static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
-{
- struct uli526x_board_info *db = netdev_priv(dev);
-
- ULI526X_DBUG(0, "uli526x_get_stats", 0);
- return &db->stats;
-}
-
-
-/*
* Set ULI526X multicast address
*/
}
-static struct pci_device_id uli526x_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(uli526x_pci_tbl) = {
{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
{ 0, }