MODULE_DESCRIPTION("Asix AX88190 PCMCIA ethernet driver");
MODULE_LICENSE("GPL");
-#ifdef PCMCIA_DEBUG
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
-#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
-static char *version =
-"axnet_cs.c 1.28 2002/06/29 06:27:37 (David Hinds)";
-#else
-#define DEBUG(n, args...)
-#endif
/*====================================================================*/
struct net_device *dev;
struct ei_device *ei_local;
- DEBUG(0, "axnet_attach()\n");
+ dev_dbg(&link->dev, "axnet_attach()\n");
dev = alloc_etherdev(sizeof(struct ei_device) + sizeof(axnet_dev_t));
if (!dev)
info->p_dev = link;
link->priv = dev;
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
- link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
{
struct net_device *dev = link->priv;
- DEBUG(0, "axnet_detach(0x%p)\n", link);
+ dev_dbg(&link->dev, "axnet_detach(0x%p)\n", link);
if (link->dev_node)
unregister_netdev(dev);
======================================================================*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int try_io_port(struct pcmcia_device *link)
{
int j, ret;
{
struct net_device *dev = link->priv;
axnet_dev_t *info = PRIV(dev);
- int i, j, j2, last_ret, last_fn;
+ int i, j, j2, ret;
- DEBUG(0, "axnet_config(0x%p)\n", link);
+ dev_dbg(&link->dev, "axnet_config(0x%p)\n", link);
/* don't trust the CIS on this; Linksys got it wrong */
link->conf.Present = 0x63;
- last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
- if (last_ret != 0) {
- cs_error(link, RequestIO, last_ret);
+ ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
+ if (ret != 0)
goto failed;
- }
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
if (link->io.NumPorts2 == 8) {
link->conf.Attributes |= CONF_ENABLE_SPKR;
link->conf.Status = CCSR_AUDIO_ENA;
}
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
+
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
info->phy_id = (i < 32) ? i : -1;
link->dev_node = &info->node;
- SET_NETDEV_DEV(dev, &handle_to_dev(link));
+ SET_NETDEV_DEV(dev, &link->dev);
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "axnet_cs: register_netdev() failed\n");
dev->base_addr, dev->irq,
dev->dev_addr);
if (info->phy_id != -1) {
- DEBUG(0, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
+ dev_dbg(&link->dev, " MII transceiver at index %d, status %x.\n", info->phy_id, j);
} else {
printk(KERN_NOTICE " No MII transceivers found!\n");
}
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
axnet_release(link);
return -ENODEV;
struct pcmcia_device *link = info->p_dev;
unsigned int nic_base = dev->base_addr;
- DEBUG(2, "axnet_open('%s')\n", dev->name);
+ dev_dbg(&link->dev, "axnet_open('%s')\n", dev->name);
if (!pcmcia_dev_present(link))
return -ENODEV;
axnet_dev_t *info = PRIV(dev);
struct pcmcia_device *link = info->p_dev;
- DEBUG(2, "axnet_close('%s')\n", dev->name);
+ dev_dbg(&link->dev, "axnet_close('%s')\n", dev->name);
ax_close(dev);
free_irq(dev->irq, dev);
int xfer_count = count;
char *buf = skb->data;
-#ifdef PCMCIA_DEBUG
if ((ei_debug > 4) && (count != 4))
- printk(KERN_DEBUG "%s: [bi=%d]\n", dev->name, count+4);
-#endif
+ pr_debug("%s: [bi=%d]\n", dev->name, count+4);
outb_p(ring_offset & 0xff, nic_base + EN0_RSARLO);
outb_p(ring_offset >> 8, nic_base + EN0_RSARHI);
outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
{
unsigned int nic_base = dev->base_addr;
-#ifdef PCMCIA_DEBUG
- if (ei_debug > 4)
- printk(KERN_DEBUG "%s: [bo=%d]\n", dev->name, count);
-#endif
+ pr_debug("%s: [bo=%d]\n", dev->name, count);
/* Round the count up for word writes. Do we need to do this?
What effect will an odd byte count have on the 8390?