#endif
#include "igb.h"
-#define DRV_VERSION "1.3.16-k2"
+#define DRV_VERSION "2.1.0-k2"
char igb_driver_name[] = "igb";
char igb_driver_version[] = DRV_VERSION;
static const char igb_driver_string[] =
};
static struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
u64 stamp = 0;
int shift = 0;
+ /*
+ * The timestamp latches on lowest register read. For the 82580
+ * the lowest register is SYSTIMR instead of SYSTIML. However we never
+ * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
+ */
+ if (hw->mac.type == e1000_82580) {
+ stamp = rd32(E1000_SYSTIMR) >> 8;
+ shift = IGB_82580_TSYNC_SHIFT;
+ }
+
stamp |= (u64)rd32(E1000_SYSTIML) << shift;
stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
return stamp;
* and continue consuming queues in the same sequence
*/
if (adapter->vfs_allocated_count) {
- for (; i < adapter->num_rx_queues; i++)
+ for (; i < adapter->rss_queues; i++)
adapter->rx_ring[i].reg_idx = rbase_offset +
Q_IDX_82576(i);
- for (; j < adapter->num_tx_queues; j++)
+ for (; j < adapter->rss_queues; j++)
adapter->tx_ring[j].reg_idx = rbase_offset +
Q_IDX_82576(j);
}
case e1000_82575:
+ case e1000_82580:
default:
for (; i < adapter->num_rx_queues; i++)
adapter->rx_ring[i].reg_idx = rbase_offset + i;
}
q_vector->eims_value = 1 << msix_vector;
break;
+ case e1000_82580:
+ /* 82580 uses the same table-based approach as 82576 but has fewer
+ entries as a result we carry over for queues greater than 4. */
+ if (rx_queue > IGB_N0_QUEUE) {
+ index = (rx_queue >> 1);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (rx_queue & 0x1) {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ } else {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ if (tx_queue > IGB_N0_QUEUE) {
+ index = (tx_queue >> 1);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (tx_queue & 0x1) {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ } else {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ q_vector->eims_value = 1 << msix_vector;
+ break;
default:
BUG();
break;
break;
case e1000_82576:
+ case e1000_82580:
/* Turn on MSI-X capability first, or our settings
* won't stick. And it will take days to debug. */
wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
int i, err = 0, vector = 0;
err = request_irq(adapter->msix_entries[vector].vector,
- &igb_msix_other, 0, netdev->name, adapter);
+ igb_msix_other, 0, netdev->name, adapter);
if (err)
goto out;
vector++;
sprintf(q_vector->name, "%s-unused", netdev->name);
err = request_irq(adapter->msix_entries[vector].vector,
- &igb_msix_ring, 0, q_vector->name,
+ igb_msix_ring, 0, q_vector->name,
q_vector);
if (err)
goto out;
int numvecs, i;
/* Number of supported queues. */
- adapter->num_rx_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
- adapter->num_tx_queues = min_t(u32, IGB_MAX_TX_QUEUES, num_online_cpus());
+ adapter->num_rx_queues = adapter->rss_queues;
+ adapter->num_tx_queues = adapter->rss_queues;
/* start with one vector for every rx queue */
numvecs = adapter->num_rx_queues;
/* if tx handler is seperate add 1 for every tx queue */
- numvecs += adapter->num_tx_queues;
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
/* store the number of vectors reserved for queues */
adapter->num_q_vectors = numvecs;
}
#endif
adapter->vfs_allocated_count = 0;
+ adapter->rss_queues = 1;
adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
adapter->num_rx_queues = 1;
adapter->num_tx_queues = 1;
E1000_EICR_TX_QUEUE0 |
E1000_EIMS_OTHER));
break;
+ case e1000_82580:
case e1000_82576:
wr32(E1000_IVAR0, E1000_IVAR_VALID);
break;
}
if (adapter->flags & IGB_FLAG_HAS_MSI) {
- err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0,
+ err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
netdev->name, adapter);
if (!err)
goto request_done;
adapter->flags &= ~IGB_FLAG_HAS_MSI;
}
- err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
+ err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
netdev->name, adapter);
if (err)
wr32(E1000_MBVFIMR, 0xFF);
ims |= E1000_IMS_VMMB;
}
+ if (adapter->hw.mac.type == e1000_82580)
+ ims |= E1000_IMS_DRSTA;
+
wr32(E1000_IMS, ims);
} else {
- wr32(E1000_IMS, IMS_ENABLE_MASK);
- wr32(E1000_IAM, IMS_ENABLE_MASK);
+ wr32(E1000_IMS, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ wr32(E1000_IAM, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
}
}
ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
}
-
/**
* igb_get_hw_control - get control of the h/w from f/w
* @adapter: address of board private structure
* igb_up - Open the interface and prepare it to handle traffic
* @adapter: board private structure
**/
-
int igb_up(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
void igb_down(struct igb_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
u32 tctl, rctl;
int i;
void igb_reset(struct igb_adapter *adapter)
{
+ struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
struct e1000_mac_info *mac = &hw->mac;
struct e1000_fc_info *fc = &hw->fc;
* To take effect CTRL.RST is required.
*/
switch (mac->type) {
+ case e1000_82580:
+ pba = rd32(E1000_RXPBS);
+ pba = igb_rxpbs_adjust_82580(pba);
+ break;
case e1000_82576:
pba = rd32(E1000_RXPBS);
pba &= E1000_RXPBS_SIZE_MASK_82576;
hwm = min(((pba << 10) * 9 / 10),
((pba << 10) - 2 * adapter->max_frame_size));
- if (mac->type < e1000_82576) {
- fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
- fc->low_water = fc->high_water - 8;
- } else {
- fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
- fc->low_water = fc->high_water - 16;
- }
+ fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
fc->pause_time = 0xFFFF;
fc->send_xon = 1;
fc->current_mode = fc->requested_mode;
}
/* Allow time for pending master requests to run */
- adapter->hw.mac.ops.reset_hw(&adapter->hw);
+ hw->mac.ops.reset_hw(hw);
wr32(E1000_WUC, 0);
- if (adapter->hw.mac.ops.init_hw(&adapter->hw))
- dev_err(&adapter->pdev->dev, "Hardware Error\n");
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&pdev->dev, "Hardware Error\n");
+ if (hw->mac.type == e1000_82580) {
+ u32 reg = rd32(E1000_PCIEMISC);
+ wr32(E1000_PCIEMISC,
+ reg & ~E1000_PCIEMISC_LX_DECISION);
+ }
igb_update_mng_vlan(adapter);
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
- igb_reset_adaptive(&adapter->hw);
- igb_get_phy_info(&adapter->hw);
+ igb_reset_adaptive(hw);
+ igb_get_phy_info(hw);
}
static const struct net_device_ops igb_netdev_ops = {
- .ndo_open = igb_open,
+ .ndo_open = igb_open,
.ndo_stop = igb_close,
.ndo_start_xmit = igb_xmit_frame_adv,
.ndo_get_stats = igb_get_stats,
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_device_id = pdev->subsystem_device;
- /* setup the private structure */
- hw->back = adapter;
/* Copy the default MAC, PHY and NVM function pointers */
memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
netdev->features |= NETIF_F_IPV6_CSUM;
netdev->features |= NETIF_F_TSO;
netdev->features |= NETIF_F_TSO6;
-
netdev->features |= NETIF_F_GRO;
netdev->vlan_features |= NETIF_F_TSO;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- if (adapter->hw.mac.type == e1000_82576)
+ if (hw->mac.type >= e1000_82576)
netdev->features |= NETIF_F_SCTP_CSUM;
- adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
/* before reading the NVM, reset the controller to put the device in a
* known good starting state */
if (hw->bus.func == 0)
hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ else if (hw->mac.type == e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
else if (hw->bus.func == 1)
hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
}
#endif
-
- switch (hw->mac.type) {
- case e1000_82576:
- /*
- * Initialize hardware timer: we keep it running just in case
- * that some program needs it later on.
- */
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * substracted at each clock tick. The drawbacks of a large
- * factor are a) that the clock register overflows more quickly
- * (not such a big deal) and b) that the increment per tick has
- * to fit into 24 bits. As a result we need to use a shift of
- * 19 so we can fit a value of 16 into the TIMINCA register.
- */
- adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
- wr32(E1000_TIMINCA,
- (1 << E1000_TIMINCA_16NS_SHIFT) |
- (16 << IGB_82576_TSYNC_SHIFT));
-
- /* Set registers so that rollover occurs soon to test this. */
- wr32(E1000_SYSTIML, 0x00000000);
- wr32(E1000_SYSTIMH, 0xFF800000);
- wrfl();
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82575:
- /* 82575 does not support timesync */
- default:
- break;
- }
-
dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
/* print bus type/speed/width info */
dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
netdev->name,
- ((hw->bus.speed == e1000_bus_speed_2500)
- ? "2.5Gb/s" : "unknown"),
+ ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ "unknown"),
((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
(hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
(hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
err_ioremap:
free_netdev(netdev);
err_alloc_etherdev:
- pci_release_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM));
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
pci_disable_device(pdev);
unregister_netdev(netdev);
- if (!igb_check_reset_block(&adapter->hw))
- igb_reset_phy(&adapter->hw);
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
igb_clear_interrupt_scheme(adapter);
dev_info(&pdev->dev, "IOV Disabled\n");
}
#endif
+
iounmap(hw->hw_addr);
if (hw->flash_address)
iounmap(hw->flash_address);
- pci_release_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM));
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
free_netdev(netdev);
#endif /* CONFIG_PCI_IOV */
}
+
+/**
+ * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
+ * @adapter: board private structure to initialize
+ *
+ * igb_init_hw_timer initializes the function pointer and values for the hw
+ * timer found in hardware.
+ **/
+static void igb_init_hw_timer(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (hw->mac.type) {
+ case e1000_82580:
+ memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+ adapter->cycles.read = igb_read_clock;
+ adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+ adapter->cycles.mult = 1;
+ /*
+ * The 82580 timesync updates the system timer every 8ns by 8ns
+ * and the value cannot be shifted. Instead we need to shift
+ * the registers to generate a 64bit timer value. As a result
+ * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
+ * 24 in order to generate a larger value for synchronization.
+ */
+ adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
+ /* disable system timer temporarily by setting bit 31 */
+ wr32(E1000_TSAUXC, 0x80000000);
+ wrfl();
+
+ /* Set registers so that rollover occurs soon to test this. */
+ wr32(E1000_SYSTIMR, 0x00000000);
+ wr32(E1000_SYSTIML, 0x80000000);
+ wr32(E1000_SYSTIMH, 0x000000FF);
+ wrfl();
+
+ /* enable system timer by clearing bit 31 */
+ wr32(E1000_TSAUXC, 0x0);
+ wrfl();
+
+ timecounter_init(&adapter->clock,
+ &adapter->cycles,
+ ktime_to_ns(ktime_get_real()));
+ /*
+ * Synchronize our NIC clock against system wall clock. NIC
+ * time stamp reading requires ~3us per sample, each sample
+ * was pretty stable even under load => only require 10
+ * samples for each offset comparison.
+ */
+ memset(&adapter->compare, 0, sizeof(adapter->compare));
+ adapter->compare.source = &adapter->clock;
+ adapter->compare.target = ktime_get_real;
+ adapter->compare.num_samples = 10;
+ timecompare_update(&adapter->compare, 0);
+ break;
+ case e1000_82576:
+ /*
+ * Initialize hardware timer: we keep it running just in case
+ * that some program needs it later on.
+ */
+ memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+ adapter->cycles.read = igb_read_clock;
+ adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+ adapter->cycles.mult = 1;
+ /**
+ * Scale the NIC clock cycle by a large factor so that
+ * relatively small clock corrections can be added or
+ * substracted at each clock tick. The drawbacks of a large
+ * factor are a) that the clock register overflows more quickly
+ * (not such a big deal) and b) that the increment per tick has
+ * to fit into 24 bits. As a result we need to use a shift of
+ * 19 so we can fit a value of 16 into the TIMINCA register.
+ */
+ adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+ wr32(E1000_TIMINCA,
+ (1 << E1000_TIMINCA_16NS_SHIFT) |
+ (16 << IGB_82576_TSYNC_SHIFT));
+
+ /* Set registers so that rollover occurs soon to test this. */
+ wr32(E1000_SYSTIML, 0x00000000);
+ wr32(E1000_SYSTIMH, 0xFF800000);
+ wrfl();
+
+ timecounter_init(&adapter->clock,
+ &adapter->cycles,
+ ktime_to_ns(ktime_get_real()));
+ /*
+ * Synchronize our NIC clock against system wall clock. NIC
+ * time stamp reading requires ~3us per sample, each sample
+ * was pretty stable even under load => only require 10
+ * samples for each offset comparison.
+ */
+ memset(&adapter->compare, 0, sizeof(adapter->compare));
+ adapter->compare.source = &adapter->clock;
+ adapter->compare.target = ktime_get_real;
+ adapter->compare.num_samples = 10;
+ timecompare_update(&adapter->compare, 0);
+ break;
+ case e1000_82575:
+ /* 82575 does not support timesync */
+ default:
+ break;
+ }
+
+}
+
/**
* igb_sw_init - Initialize general software structures (struct igb_adapter)
* @adapter: board private structure to initialize
adapter->vfs_allocated_count = max_vfs;
#endif /* CONFIG_PCI_IOV */
+ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+
+ /*
+ * if rss_queues > 4 or vfs are going to be allocated with rss_queues
+ * then we should combine the queues into a queue pair in order to
+ * conserve interrupts due to limited supply
+ */
+ if ((adapter->rss_queues > 4) ||
+ ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+
/* This call may decrease the number of queues */
if (igb_init_interrupt_scheme(adapter)) {
dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
return -ENOMEM;
}
+ igb_init_hw_timer(adapter);
igb_probe_vfs(adapter);
/* Explicitly disable IRQ since the NIC can be in any state. */
}
}
- for (i = 0; i < IGB_MAX_TX_QUEUES; i++) {
+ for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
int r_idx = i % adapter->num_tx_queues;
adapter->multi_tx_table[i] = &adapter->tx_ring[r_idx];
}
array_wr32(E1000_RSSRK(0), j, rsskey);
}
- num_rx_queues = adapter->num_rx_queues;
+ num_rx_queues = adapter->rss_queues;
if (adapter->vfs_allocated_count) {
/* 82575 and 82576 supports 2 RSS queues for VMDq */
switch (hw->mac.type) {
+ case e1000_82580:
+ num_rx_queues = 1;
+ shift = 0;
+ break;
case e1000_82576:
shift = 3;
num_rx_queues = 2;
E1000_VT_CTL_DEFAULT_POOL_SHIFT;
wr32(E1000_VT_CTL, vtctl);
}
- if (adapter->num_rx_queues > 1)
+ if (adapter->rss_queues > 1)
mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
else
mrqc = E1000_MRQC_ENABLE_VMDQ;
*/
rctl |= E1000_RCTL_SECRC;
- /*
- * disable store bad packets and clear size bits.
- */
+ /* disable store bad packets and clear size bits. */
rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
/* enable LPE to prevent packets larger than max_frame_size */
/* clear all bits that might not be set */
vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
- if (adapter->num_rx_queues > 1 && vfn == adapter->vfs_allocated_count)
+ if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
/*
* for VMDq only allow the VFs and pool 0 to accept broadcast and
void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
struct igb_buffer *buffer_info)
{
- buffer_info->dma = 0;
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ pci_unmap_page(tx_ring->pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_single(tx_ring->pdev,
+ buffer_info->dma,
+ buffer_info->length,
+ PCI_DMA_TODEVICE);
+ buffer_info->dma = 0;
+ }
if (buffer_info->skb) {
- skb_dma_unmap(&tx_ring->pdev->dev,
- buffer_info->skb,
- DMA_TO_DEVICE);
dev_kfree_skb_any(buffer_info->skb);
buffer_info->skb = NULL;
}
buffer_info->time_stamp = 0;
- /* buffer_info must be completely set up in the transmit path */
+ buffer_info->length = 0;
+ buffer_info->next_to_watch = 0;
+ buffer_info->mapped_as_page = false;
}
/**
static void igb_watchdog_task(struct work_struct *work)
{
struct igb_adapter *adapter = container_of(work,
- struct igb_adapter, watchdog_task);
+ struct igb_adapter,
+ watchdog_task);
struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- struct igb_ring *tx_ring = adapter->tx_ring;
u32 link;
int i;
if (link) {
if (!netif_carrier_ok(netdev)) {
u32 ctrl;
- hw->mac.ops.get_speed_and_duplex(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
"Flow Control: %s\n",
- netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
"Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl &
- E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
- E1000_CTRL_RFCE) ? "RX" : ((ctrl &
- E1000_CTRL_TFCE) ? "TX" : "None")));
+ ((ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+ ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
/* tweak tx_queue_len according to speed/duplex and
* adjust the timeout factor */
igb_update_stats(adapter);
igb_update_adaptive(hw);
- if (!netif_carrier_ok(netdev)) {
- if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = &adapter->tx_ring[i];
+ if (!netif_carrier_ok(netdev)) {
/* We've lost link, so the controller stops DMA,
* but we've got queued Tx work that's never going
* to get done, so reset controller to flush Tx.
* (Do the reset outside of interrupt context). */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
- /* return immediately since reset is imminent */
- return;
+ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
}
- }
- /* Force detection of hung controller every watchdog period */
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i].detect_tx_hung = true;
+ /* Force detection of hung controller every watchdog period */
+ tx_ring->detect_tx_hung = true;
+ }
/* Cause software interrupt to ensure rx ring is cleaned */
if (adapter->msix_entries) {
#define IGB_TX_FLAGS_VLAN 0x00000002
#define IGB_TX_FLAGS_TSO 0x00000004
#define IGB_TX_FLAGS_IPV4 0x00000008
-#define IGB_TX_FLAGS_TSTAMP 0x00000010
-#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IGB_TX_FLAGS_VLAN_SHIFT 16
+#define IGB_TX_FLAGS_TSTAMP 0x00000010
+#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT 16
static inline int igb_tso_adv(struct igb_ring *tx_ring,
struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
if (tx_flags & IGB_TX_FLAGS_VLAN)
info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+
info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
if (skb->ip_summed == CHECKSUM_PARTIAL)
info |= skb_network_header_len(skb);
unsigned int len = skb_headlen(skb);
unsigned int count = 0, i;
unsigned int f;
- dma_addr_t *map;
i = tx_ring->next_to_use;
- if (skb_dma_map(&pdev->dev, skb, DMA_TO_DEVICE)) {
- dev_err(&pdev->dev, "TX DMA map failed\n");
- return 0;
- }
-
- map = skb_shinfo(skb)->dma_maps;
-
buffer_info = &tx_ring->buffer_info[i];
BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
buffer_info->length = len;
/* set time_stamp *before* dma to help avoid a possible race */
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- buffer_info->dma = skb_shinfo(skb)->dma_head;
+ buffer_info->dma = pci_map_single(pdev, skb->data, len,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
struct skb_frag_struct *frag;
+ count++;
i++;
if (i == tx_ring->count)
i = 0;
buffer_info->length = len;
buffer_info->time_stamp = jiffies;
buffer_info->next_to_watch = i;
- buffer_info->dma = map[count];
- count++;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = pci_map_page(pdev,
+ frag->page,
+ frag->page_offset,
+ len,
+ PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(pdev, buffer_info->dma))
+ goto dma_error;
+
}
tx_ring->buffer_info[i].skb = skb;
tx_ring->buffer_info[first].next_to_watch = i;
- return count + 1;
+ return ++count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+
+ /* clear timestamp and dma mappings for failed buffer_info mapping */
+ buffer_info->dma = 0;
+ buffer_info->time_stamp = 0;
+ buffer_info->length = 0;
+ buffer_info->next_to_watch = 0;
+ buffer_info->mapped_as_page = false;
+ count--;
+
+ /* clear timestamp and dma mappings for remaining portion of packet */
+ while (count >= 0) {
+ count--;
+ i--;
+ if (i < 0)
+ i += tx_ring->count;
+ buffer_info = &tx_ring->buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ return 0;
}
static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
int tx_flags, int count, u32 paylen,
u8 hdr_len)
{
- union e1000_adv_tx_desc *tx_desc = NULL;
+ union e1000_adv_tx_desc *tx_desc;
struct igb_buffer *buffer_info;
u32 olinfo_status = 0, cmd_type_len;
- unsigned int i;
+ unsigned int i = tx_ring->next_to_use;
cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
E1000_ADVTXD_DCMD_DEXT);
olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
- i = tx_ring->next_to_use;
- while (count--) {
+ do {
buffer_info = &tx_ring->buffer_info[i];
tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
tx_desc->read.cmd_type_len =
cpu_to_le32(cmd_type_len | buffer_info->length);
tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ count--;
i++;
if (i == tx_ring->count)
i = 0;
- }
+ } while (count > 0);
tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
/* Force memory writes to complete before letting h/w
unsigned int first;
unsigned int tx_flags = 0;
u8 hdr_len = 0;
- int count = 0;
- int tso = 0;
+ int tso = 0, count;
union skb_shared_tx *shtx = skb_tx(skb);
/* need: 1 descriptor per page,
tx_flags |= IGB_TX_FLAGS_TSTAMP;
}
- if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
+ if (vlan_tx_tag_present(skb) && adapter->vlgrp) {
tx_flags |= IGB_TX_FLAGS_VLAN;
tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
}
first = tx_ring->next_to_use;
if (skb_is_gso(skb)) {
tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
+
if (tso < 0) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
tx_flags |= IGB_TX_FLAGS_CSUM;
/*
- * count reflects descriptors mapped, if 0 then mapping error
+ * count reflects descriptors mapped, if 0 or less then mapping error
* has occured and we need to rewind the descriptor queue
*/
count = igb_tx_map_adv(tx_ring, skb, first);
-
if (!count) {
dev_kfree_skb_any(skb);
tx_ring->buffer_info[first].time_stamp = 0;
/* Do the reset outside of interrupt context */
adapter->tx_timeout_count++;
+ if (hw->mac.type == e1000_82580)
+ hw->dev_spec._82575.global_device_reset = true;
+
schedule_work(&adapter->reset_task);
wr32(E1000_EICS,
(adapter->eims_enable_mask & ~adapter->eims_other));
static int igb_change_mtu(struct net_device *netdev, int new_mtu)
{
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
u32 rx_buffer_len, i;
- if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&pdev->dev, "Invalid MTU setting\n");
return -EINVAL;
}
if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+ dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
return -EINVAL;
}
/* igb_down has a dependency on max_frame_size */
adapter->max_frame_size = max_frame;
+
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
if (netif_running(netdev))
igb_down(adapter);
- dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+ dev_info(&pdev->dev, "changing MTU from %d to %d\n",
netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
void igb_update_stats(struct igb_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
+ struct net_device_stats *net_stats = igb_get_stats(adapter->netdev);
struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
u32 rnbc;
for (i = 0; i < adapter->num_rx_queues; i++) {
u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
- netdev->stats.rx_fifo_errors += rqdpc_tmp;
+ net_stats->rx_fifo_errors += rqdpc_tmp;
bytes += adapter->rx_ring[i].rx_stats.bytes;
packets += adapter->rx_ring[i].rx_stats.packets;
}
- netdev->stats.rx_bytes = bytes;
- netdev->stats.rx_packets = packets;
+ net_stats->rx_bytes = bytes;
+ net_stats->rx_packets = packets;
bytes = 0;
packets = 0;
bytes += adapter->tx_ring[i].tx_stats.bytes;
packets += adapter->tx_ring[i].tx_stats.packets;
}
- netdev->stats.tx_bytes = bytes;
- netdev->stats.tx_packets = packets;
+ net_stats->tx_bytes = bytes;
+ net_stats->tx_packets = packets;
/* read stats registers */
adapter->stats.crcerrs += rd32(E1000_CRCERRS);
rd32(E1000_GOTCH); /* clear GOTCL */
rnbc = rd32(E1000_RNBC);
adapter->stats.rnbc += rnbc;
- netdev->stats.rx_fifo_errors += rnbc;
+ net_stats->rx_fifo_errors += rnbc;
adapter->stats.ruc += rd32(E1000_RUC);
adapter->stats.rfc += rd32(E1000_RFC);
adapter->stats.rjc += rd32(E1000_RJC);
adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
/* Fill out the OS statistics structure */
- netdev->stats.multicast = adapter->stats.mprc;
- netdev->stats.collisions = adapter->stats.colc;
+ net_stats->multicast = adapter->stats.mprc;
+ net_stats->collisions = adapter->stats.colc;
/* Rx Errors */
/* RLEC on some newer hardware can be incorrect so build
* our own version based on RUC and ROC */
- netdev->stats.rx_errors = adapter->stats.rxerrc +
+ net_stats->rx_errors = adapter->stats.rxerrc +
adapter->stats.crcerrs + adapter->stats.algnerrc +
adapter->stats.ruc + adapter->stats.roc +
adapter->stats.cexterr;
- netdev->stats.rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
- netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
- netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
- netdev->stats.rx_missed_errors = adapter->stats.mpc;
+ net_stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ net_stats->rx_crc_errors = adapter->stats.crcerrs;
+ net_stats->rx_frame_errors = adapter->stats.algnerrc;
+ net_stats->rx_missed_errors = adapter->stats.mpc;
/* Tx Errors */
- netdev->stats.tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
- netdev->stats.tx_aborted_errors = adapter->stats.ecol;
- netdev->stats.tx_window_errors = adapter->stats.latecol;
- netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+ net_stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ net_stats->tx_aborted_errors = adapter->stats.ecol;
+ net_stats->tx_window_errors = adapter->stats.latecol;
+ net_stats->tx_carrier_errors = adapter->stats.tncrs;
/* Tx Dropped needs to be maintained elsewhere */
{
struct net_device *netdev = dev_get_drvdata(dev);
struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
unsigned long event = *(unsigned long *)data;
/* if already enabled, don't do it again */
if (adapter->flags & IGB_FLAG_DCA_ENABLED)
break;
- /* Always use CB2 mode, difference is masked
- * in the CB driver. */
- wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
if (dca_add_requester(dev) == 0) {
adapter->flags |= IGB_FLAG_DCA_ENABLED;
- dev_info(&adapter->pdev->dev, "DCA enabled\n");
+ dev_info(&pdev->dev, "DCA enabled\n");
igb_setup_dca(adapter);
break;
}
/* without this a class_device is left
* hanging around in the sysfs model */
dca_remove_requester(dev);
- dev_info(&adapter->pdev->dev, "DCA disabled\n");
+ dev_info(&pdev->dev, "DCA disabled\n");
adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
}
retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
- if (retval)
+ if (retval) {
+ /* if receive failed revoke VF CTS stats and restart init */
dev_err(&pdev->dev, "Error receiving message from VF\n");
+ vf_data->flags &= ~IGB_VF_FLAG_CTS;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ goto out;
+ }
/* this is a message we already processed, do nothing */
if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
}
if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
- msgbuf[0] = E1000_VT_MSGTYPE_NACK;
- if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
- igb_write_mbx(hw, msgbuf, 1, vf);
- vf_data->last_nack = jiffies;
- }
- return;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ retval = -1;
+ goto out;
}
switch ((msgbuf[0] & 0xFFFF)) {
retval = igb_set_vf_vlan(adapter, msgbuf, vf);
break;
default:
- dev_err(&adapter->pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+ dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
retval = -1;
break;
}
+ msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
/* notify the VF of the results of what it sent us */
if (retval)
msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
else
msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
- msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
-
igb_write_mbx(hw, msgbuf, 1, vf);
}
{
u64 ns;
+ /*
+ * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
+ * 24 to match clock shift we setup earlier.
+ */
+ if (adapter->hw.mac.type == e1000_82580)
+ regval <<= IGB_82580_TSYNC_SHIFT;
+
ns = timecounter_cyc2time(&adapter->clock, regval);
timecompare_update(&adapter->compare, ns);
memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
tx_ring->detect_tx_hung = false;
if (tx_ring->buffer_info[i].time_stamp &&
time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
- (adapter->tx_timeout_factor * HZ))
- && !(rd32(E1000_STATUS) &
- E1000_STATUS_TXOFF)) {
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
/* detected Tx unit hang */
dev_err(&tx_ring->pdev->dev,
struct sk_buff *skb;
bool cleaned = false;
int cleaned_count = 0;
+ int current_node = numa_node_id();
unsigned int total_bytes = 0, total_packets = 0;
unsigned int i;
u32 staterr;
i++;
if (i == rx_ring->count)
i = 0;
+
next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
prefetch(next_rxd);
next_buffer = &rx_ring->buffer_info[i];
buffer_info->page_offset,
length);
- if (page_count(buffer_info->page) != 1)
+ if ((page_count(buffer_info->page) != 1) ||
+ (page_to_nid(buffer_info->page) != current_node))
buffer_info->page = NULL;
else
get_page(buffer_info->page);
skb->len += length;
skb->data_len += length;
-
skb->truesize += length;
}
if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
if (!buffer_info->page) {
- buffer_info->page = alloc_page(GFP_ATOMIC);
+ buffer_info->page = netdev_alloc_page(netdev);
if (!buffer_info->page) {
rx_ring->rx_stats.alloc_failed++;
goto no_buffers;
buffer_info->page_offset,
PAGE_SIZE / 2,
PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(rx_ring->pdev,
+ buffer_info->page_dma)) {
+ buffer_info->page_dma = 0;
+ rx_ring->rx_stats.alloc_failed++;
+ goto no_buffers;
+ }
}
- if (!buffer_info->skb) {
+ skb = buffer_info->skb;
+ if (!skb) {
skb = netdev_alloc_skb_ip_align(netdev, bufsz);
if (!skb) {
rx_ring->rx_stats.alloc_failed++;
}
buffer_info->skb = skb;
+ }
+ if (!buffer_info->dma) {
buffer_info->dma = pci_map_single(rx_ring->pdev,
skb->data,
bufsz,
PCI_DMA_FROMDEVICE);
+ if (pci_dma_mapping_error(rx_ring->pdev,
+ buffer_info->dma)) {
+ buffer_info->dma = 0;
+ rx_ring->rx_stats.alloc_failed++;
+ goto no_buffers;
+ }
}
/* Refresh the desc even if buffer_addrs didn't change because
* each write-back erases this info. */
cpu_to_le64(buffer_info->page_dma);
rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
} else {
- rx_desc->read.pkt_addr =
- cpu_to_le64(buffer_info->dma);
+ rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
rx_desc->read.hdr_addr = 0;
}
int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
{
+ struct pci_dev *pdev = adapter->pdev;
struct e1000_mac_info *mac = &adapter->hw.mac;
mac->autoneg = 0;
break;
case SPEED_1000 + DUPLEX_HALF: /* not supported */
default:
- dev_err(&adapter->pdev->dev,
- "Unsupported Speed/Duplex configuration\n");
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
return -EINVAL;
}
return 0;
wr32(E1000_CTRL, ctrl);
/* Allow time for pending master requests to run */
- igb_disable_pcie_master(&adapter->hw);
+ igb_disable_pcie_master(hw);
wr32(E1000_WUC, E1000_WUC_PME_EN);
wr32(E1000_WUFC, wufc);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff