* drivers/net/gianfar.c
*
* Gianfar Ethernet Driver
- * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
+ * This driver is designed for the non-CPM ethernet controllers
+ * on the 85xx and 83xx family of integrated processors
* Based on 8260_io/fcc_enet.c
*
* Author: Andy Fleming
- * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ * Maintainer: Kumar Gala
*
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
+ * Copyright (c) 2007 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* B-V +1.62
*
* Theory of operation
- * This driver is designed for the non-CPM ethernet controllers
- * on the 85xx and 83xx family of integrated processors
*
* The driver is initialized through platform_device. Structures which
* define the configuration needed by the board are defined in a
* The driver then cleans up the buffer.
*/
-#include <linux/config.h>
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/if_vlan.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
+#include <linux/in.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/dma-mapping.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#endif
const char gfar_driver_name[] = "Gianfar Ethernet";
-const char gfar_driver_version[] = "1.2";
+const char gfar_driver_version[] = "1.3";
static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
static struct net_device_stats *gfar_get_stats(struct net_device *dev);
static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
-static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs);
-static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static irqreturn_t gfar_error(int irq, void *dev_id);
+static irqreturn_t gfar_transmit(int irq, void *dev_id);
+static irqreturn_t gfar_interrupt(int irq, void *dev_id);
static void adjust_link(struct net_device *dev);
static void init_registers(struct net_device *dev);
static int init_phy(struct net_device *dev);
-static int gfar_probe(struct device *device);
-static int gfar_remove(struct device *device);
+static int gfar_probe(struct platform_device *pdev);
+static int gfar_remove(struct platform_device *pdev);
static void free_skb_resources(struct gfar_private *priv);
static void gfar_set_multi(struct net_device *dev);
static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr);
#ifdef CONFIG_GFAR_NAPI
static int gfar_poll(struct net_device *dev, int *budget);
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void gfar_netpoll(struct net_device *dev);
+#endif
int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int length);
static void gfar_vlan_rx_register(struct net_device *netdev,
struct vlan_group *grp);
static void gfar_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+void gfar_halt(struct net_device *dev);
+void gfar_start(struct net_device *dev);
+static void gfar_clear_exact_match(struct net_device *dev);
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
-extern struct ethtool_ops gfar_ethtool_ops;
+extern const struct ethtool_ops gfar_ethtool_ops;
MODULE_AUTHOR("Freescale Semiconductor, Inc");
MODULE_DESCRIPTION("Gianfar Ethernet Driver");
MODULE_LICENSE("GPL");
-int gfar_uses_fcb(struct gfar_private *priv)
+/* Returns 1 if incoming frames use an FCB */
+static inline int gfar_uses_fcb(struct gfar_private *priv)
{
- if (priv->vlan_enable || priv->rx_csum_enable)
- return 1;
- else
- return 0;
+ return (priv->vlan_enable || priv->rx_csum_enable);
}
/* Set up the ethernet device structure, private data,
* and anything else we need before we start */
-static int gfar_probe(struct device *device)
+static int gfar_probe(struct platform_device *pdev)
{
u32 tempval;
struct net_device *dev = NULL;
struct gfar_private *priv = NULL;
- struct platform_device *pdev = to_platform_device(device);
struct gianfar_platform_data *einfo;
struct resource *r;
int idx;
priv->interruptTransmit = platform_get_irq_byname(pdev, "tx");
priv->interruptReceive = platform_get_irq_byname(pdev, "rx");
priv->interruptError = platform_get_irq_byname(pdev, "error");
+ if (priv->interruptTransmit < 0 || priv->interruptReceive < 0 || priv->interruptError < 0)
+ goto regs_fail;
} else {
priv->interruptTransmit = platform_get_irq(pdev, 0);
+ if (priv->interruptTransmit < 0)
+ goto regs_fail;
}
/* get a pointer to the register memory */
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->regs = (struct gfar *)
- ioremap(r->start, sizeof (struct gfar));
+ priv->regs = ioremap(r->start, sizeof (struct gfar));
if (NULL == priv->regs) {
err = -ENOMEM;
goto regs_fail;
}
- spin_lock_init(&priv->lock);
+ spin_lock_init(&priv->txlock);
+ spin_lock_init(&priv->rxlock);
- dev_set_drvdata(device, dev);
+ platform_set_drvdata(pdev, dev);
/* Stop the DMA engine now, in case it was running before */
/* (The firmware could have used it, and left it running). */
dev->base_addr = (unsigned long) (priv->regs);
SET_MODULE_OWNER(dev);
- SET_NETDEV_DEV(dev, device);
+ SET_NETDEV_DEV(dev, &pdev->dev);
/* Fill in the dev structure */
dev->open = gfar_enet_open;
dev->poll = gfar_poll;
dev->weight = GFAR_DEV_WEIGHT;
#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = gfar_netpoll;
+#endif
dev->stop = gfar_close;
dev->get_stats = gfar_get_stats;
dev->change_mtu = gfar_change_mtu;
else
priv->padding = 0;
- dev->hard_header_len += priv->padding;
-
if (dev->features & NETIF_F_IP_CSUM)
dev->hard_header_len += GMAC_FCB_LEN;
priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
-#ifdef CONFIG_GFAR_BUFSTASH
- priv->rx_stash_size = STASH_LENGTH;
-#endif
priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
goto register_fail;
}
+ /* Create all the sysfs files */
+ gfar_init_sysfs(dev);
+
/* Print out the device info */
printk(KERN_INFO DEVICE_NAME, dev->name);
for (idx = 0; idx < 6; idx++)
printk("\n");
/* Even more device info helps when determining which kernel */
- /* provided which set of benchmarks. Since this is global for all */
- /* devices, we only print it once */
+ /* provided which set of benchmarks. */
#ifdef CONFIG_GFAR_NAPI
printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
#else
return 0;
register_fail:
- iounmap((void *) priv->regs);
+ iounmap(priv->regs);
regs_fail:
free_netdev(dev);
return err;
}
-static int gfar_remove(struct device *device)
+static int gfar_remove(struct platform_device *pdev)
{
- struct net_device *dev = dev_get_drvdata(device);
+ struct net_device *dev = platform_get_drvdata(pdev);
struct gfar_private *priv = netdev_priv(dev);
- dev_set_drvdata(device, NULL);
+ platform_set_drvdata(pdev, NULL);
- iounmap((void *) priv->regs);
+ iounmap(priv->regs);
free_netdev(dev);
return 0;
}
+/* Reads the controller's registers to determine what interface
+ * connects it to the PHY.
+ */
+static phy_interface_t gfar_get_interface(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ u32 ecntrl = gfar_read(&priv->regs->ecntrl);
+
+ if (ecntrl & ECNTRL_SGMII_MODE)
+ return PHY_INTERFACE_MODE_SGMII;
+
+ if (ecntrl & ECNTRL_TBI_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MODE)
+ return PHY_INTERFACE_MODE_RTBI;
+ else
+ return PHY_INTERFACE_MODE_TBI;
+ }
+
+ if (ecntrl & ECNTRL_REDUCED_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+ return PHY_INTERFACE_MODE_RMII;
+ else
+ return PHY_INTERFACE_MODE_RGMII;
+ }
+
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT)
+ return PHY_INTERFACE_MODE_GMII;
+
+ return PHY_INTERFACE_MODE_MII;
+}
+
+
/* Initializes driver's PHY state, and attaches to the PHY.
* Returns 0 on success.
*/
priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
SUPPORTED_1000baseT_Full : 0;
struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE];
+ phy_interface_t interface;
priv->oldlink = 0;
priv->oldspeed = 0;
priv->oldduplex = -1;
- phydev = phy_connect(dev, priv->einfo->bus_id, &adjust_link, 0);
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, priv->einfo->bus_id, priv->einfo->phy_id);
+
+ interface = gfar_get_interface(dev);
+
+ phydev = phy_connect(dev, phy_id, &adjust_link, 0, interface);
if (IS_ERR(phydev)) {
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
/* Zero out the rmon mib registers if it has them */
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
- memset((void *) &(priv->regs->rmon), 0,
- sizeof (struct rmon_mib));
+ memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
/* Mask off the CAM interrupts */
gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
/* Initialize the max receive buffer length */
gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
-#ifdef CONFIG_GFAR_BUFSTASH
- /* If we are stashing buffers, we need to set the
- * extraction length to the size of the buffer */
- gfar_write(&priv->regs->attreli, priv->rx_stash_size << 16);
-#endif
-
/* Initialize the Minimum Frame Length Register */
gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
- /* Setup Attributes so that snooping is on for rx */
- gfar_write(&priv->regs->attr, ATTR_INIT_SETTINGS);
- gfar_write(&priv->regs->attreli, ATTRELI_INIT_SETTINGS);
-
/* Assign the TBI an address which won't conflict with the PHYs */
gfar_write(&priv->regs->tbipa, TBIPA_VALUE);
}
void gfar_halt(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
/* Mask all interrupts */
void stop_gfar(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
unsigned long flags;
phy_stop(priv->phydev);
/* Lock it down */
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->txlock, flags);
+ spin_lock(&priv->rxlock);
gfar_halt(dev);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock(&priv->rxlock);
+ spin_unlock_irqrestore(&priv->txlock, flags);
/* Free the IRQs */
if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
for (i = 0; i < priv->rx_ring_size; i++) {
if (priv->rx_skbuff[i]) {
dma_unmap_single(NULL, rxbdp->bufPtr,
- priv->rx_buffer_size
- + RXBUF_ALIGNMENT,
+ priv->rx_buffer_size,
DMA_FROM_DEVICE);
dev_kfree_skb_any(priv->rx_skbuff[i]);
void gfar_start(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
/* Enable Rx and Tx in MACCFG1 */
tempval |= DMACTRL_INIT_SETTINGS;
gfar_write(&priv->regs->dmactrl, tempval);
- /* Clear THLT, so that the DMA starts polling now */
- gfar_write(®s->tstat, TSTAT_CLEAR_THALT);
-
/* Make sure we aren't stopped */
tempval = gfar_read(&priv->regs->dmactrl);
tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
gfar_write(&priv->regs->dmactrl, tempval);
+ /* Clear THLT/RHLT, so that the DMA starts polling now */
+ gfar_write(®s->tstat, TSTAT_CLEAR_THALT);
+ gfar_write(®s->rstat, RSTAT_CLEAR_RHALT);
+
/* Unmask the interrupts we look for */
gfar_write(®s->imask, IMASK_DEFAULT);
}
unsigned long vaddr;
int i;
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
int err = 0;
u32 rctrl = 0;
+ u32 attrs = 0;
gfar_write(®s->imask, IMASK_INIT_CLEAR);
if (priv->rx_csum_enable)
rctrl |= RCTRL_CHECKSUMMING;
- if (priv->extended_hash)
+ if (priv->extended_hash) {
rctrl |= RCTRL_EXTHASH;
+ gfar_clear_exact_match(dev);
+ rctrl |= RCTRL_EMEN;
+ }
+
if (priv->vlan_enable)
rctrl |= RCTRL_VLAN;
+ if (priv->padding) {
+ rctrl &= ~RCTRL_PAL_MASK;
+ rctrl |= RCTRL_PADDING(priv->padding);
+ }
+
/* Init rctrl based on our settings */
gfar_write(&priv->regs->rctrl, rctrl);
if (dev->features & NETIF_F_IP_CSUM)
gfar_write(&priv->regs->tctrl, TCTRL_INIT_CSUM);
+ /* Set the extraction length and index */
+ attrs = ATTRELI_EL(priv->rx_stash_size) |
+ ATTRELI_EI(priv->rx_stash_index);
+
+ gfar_write(&priv->regs->attreli, attrs);
+
+ /* Start with defaults, and add stashing or locking
+ * depending on the approprate variables */
+ attrs = ATTR_INIT_SETTINGS;
+
+ if (priv->bd_stash_en)
+ attrs |= ATTR_BDSTASH;
+
+ if (priv->rx_stash_size != 0)
+ attrs |= ATTR_BUFSTASH;
+
+ gfar_write(&priv->regs->attr, attrs);
+
+ gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
+ gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
+ gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
+
+ /* Start the controller */
gfar_start(dev);
return 0;
return err;
}
-static struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
+static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb, struct txbd8 *bdp)
{
struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
memset(fcb, 0, GMAC_FCB_LEN);
- /* Flag the bd so the controller looks for the FCB */
- bdp->status |= TXBD_TOE;
-
return fcb;
}
static inline void gfar_tx_checksum(struct sk_buff *skb, struct txfcb *fcb)
{
- int len;
+ u8 flags = 0;
/* If we're here, it's a IP packet with a TCP or UDP
* payload. We set it to checksum, using a pseudo-header
* we provide
*/
- fcb->ip = 1;
- fcb->tup = 1;
- fcb->ctu = 1;
- fcb->nph = 1;
+ flags = TXFCB_DEFAULT;
- /* Notify the controller what the protocol is */
- if (skb->nh.iph->protocol == IPPROTO_UDP)
- fcb->udp = 1;
+ /* Tell the controller what the protocol is */
+ /* And provide the already calculated phcs */
+ if (ip_hdr(skb)->protocol == IPPROTO_UDP) {
+ flags |= TXFCB_UDP;
+ fcb->phcs = skb->h.uh->check;
+ } else
+ fcb->phcs = skb->h.th->check;
/* l3os is the distance between the start of the
* frame (skb->data) and the start of the IP hdr.
* l4os is the distance between the start of the
* l3 hdr and the l4 hdr */
- fcb->l3os = (u16)(skb->nh.raw - skb->data - GMAC_FCB_LEN);
+ fcb->l3os = (u16)(skb_network_offset(skb) - GMAC_FCB_LEN);
fcb->l4os = (u16)(skb->h.raw - skb->nh.raw);
- len = skb->nh.iph->tot_len - fcb->l4os;
-
- /* Provide the pseudoheader csum */
- fcb->phcs = ~csum_tcpudp_magic(skb->nh.iph->saddr,
- skb->nh.iph->daddr, len,
- skb->nh.iph->protocol, 0);
+ fcb->flags = flags;
}
-void gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
+void inline gfar_tx_vlan(struct sk_buff *skb, struct txfcb *fcb)
{
- fcb->vln = 1;
+ fcb->flags |= TXFCB_VLN;
fcb->vlctl = vlan_tx_tag_get(skb);
}
struct gfar_private *priv = netdev_priv(dev);
struct txfcb *fcb = NULL;
struct txbd8 *txbdp;
+ u16 status;
+ unsigned long flags;
/* Update transmit stats */
priv->stats.tx_bytes += skb->len;
/* Lock priv now */
- spin_lock_irq(&priv->lock);
+ spin_lock_irqsave(&priv->txlock, flags);
/* Point at the first free tx descriptor */
txbdp = priv->cur_tx;
/* Clear all but the WRAP status flags */
- txbdp->status &= TXBD_WRAP;
+ status = txbdp->status & TXBD_WRAP;
/* Set up checksumming */
- if ((dev->features & NETIF_F_IP_CSUM)
- && (CHECKSUM_HW == skb->ip_summed)) {
+ if (likely((dev->features & NETIF_F_IP_CSUM)
+ && (CHECKSUM_PARTIAL == skb->ip_summed))) {
fcb = gfar_add_fcb(skb, txbdp);
+ status |= TXBD_TOE;
gfar_tx_checksum(skb, fcb);
}
if (priv->vlan_enable &&
unlikely(priv->vlgrp && vlan_tx_tag_present(skb))) {
- if (NULL == fcb)
+ if (unlikely(NULL == fcb)) {
fcb = gfar_add_fcb(skb, txbdp);
+ status |= TXBD_TOE;
+ }
gfar_tx_vlan(skb, fcb);
}
(priv->skb_curtx + 1) & TX_RING_MOD_MASK(priv->tx_ring_size);
/* Flag the BD as interrupt-causing */
- txbdp->status |= TXBD_INTERRUPT;
+ status |= TXBD_INTERRUPT;
/* Flag the BD as ready to go, last in frame, and */
/* in need of CRC */
- txbdp->status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
+ status |= (TXBD_READY | TXBD_LAST | TXBD_CRC);
dev->trans_start = jiffies;
+ txbdp->status = status;
+
/* If this was the last BD in the ring, the next one */
/* is at the beginning of the ring */
if (txbdp->status & TXBD_WRAP)
gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
/* Unlock priv */
- spin_unlock_irq(&priv->lock);
+ spin_unlock_irqrestore(&priv->txlock, flags);
return 0;
}
/* Changes the mac address if the controller is not running. */
int gfar_set_mac_address(struct net_device *dev)
{
- struct gfar_private *priv = netdev_priv(dev);
- int i;
- char tmpbuf[MAC_ADDR_LEN];
- u32 tempval;
-
- /* Now copy it into the mac registers backwards, cuz */
- /* little endian is silly */
- for (i = 0; i < MAC_ADDR_LEN; i++)
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->dev_addr[i];
-
- gfar_write(&priv->regs->macstnaddr1, *((u32 *) (tmpbuf)));
-
- tempval = *((u32 *) (tmpbuf + 4));
-
- gfar_write(&priv->regs->macstnaddr2, tempval);
+ gfar_set_mac_for_addr(dev, 0, dev->dev_addr);
return 0;
}
unsigned long flags;
u32 tempval;
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->rxlock, flags);
priv->vlgrp = grp;
tempval |= TCTRL_VLINS;
gfar_write(&priv->regs->tctrl, tempval);
-
+
/* Enable VLAN tag extraction */
tempval = gfar_read(&priv->regs->rctrl);
tempval |= RCTRL_VLEX;
gfar_write(&priv->regs->rctrl, tempval);
}
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->rxlock, flags);
}
struct gfar_private *priv = netdev_priv(dev);
unsigned long flags;
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->rxlock, flags);
- if (priv->vlgrp)
- priv->vlgrp->vlan_devices[vid] = NULL;
+ vlan_group_set_device(priv->vlgrp, vid, NULL);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->rxlock, flags);
}
INCREMENTAL_BUFFER_SIZE;
/* Only stop and start the controller if it isn't already
- * stopped */
+ * stopped, and we changed something */
if ((oldsize != tempsize) && (dev->flags & IFF_UP))
stop_gfar(dev);
}
/* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_transmit(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct gfar_private *priv = netdev_priv(dev);
gfar_write(&priv->regs->ievent, IEVENT_TX_MASK);
/* Lock priv */
- spin_lock(&priv->lock);
+ spin_lock(&priv->txlock);
bdp = priv->dirty_tx;
while ((bdp->status & TXBD_READY) == 0) {
/* If dirty_tx and cur_tx are the same, then either the */
else
gfar_write(&priv->regs->txic, 0);
- spin_unlock(&priv->lock);
+ spin_unlock(&priv->txlock);
return IRQ_HANDLED;
}
struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
{
+ unsigned int alignamount;
struct gfar_private *priv = netdev_priv(dev);
struct sk_buff *skb = NULL;
unsigned int timeout = SKB_ALLOC_TIMEOUT;
if (NULL == skb)
return NULL;
+ alignamount = RXBUF_ALIGNMENT -
+ (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1));
+
/* We need the data buffer to be aligned properly. We will reserve
* as many bytes as needed to align the data properly
*/
- skb_reserve(skb,
- RXBUF_ALIGNMENT -
- (((unsigned) skb->data) & (RXBUF_ALIGNMENT - 1)));
-
- skb->dev = dev;
+ skb_reserve(skb, alignamount);
bdp->bufPtr = dma_map_single(NULL, skb->data,
- priv->rx_buffer_size + RXBUF_ALIGNMENT,
- DMA_FROM_DEVICE);
+ priv->rx_buffer_size, DMA_FROM_DEVICE);
bdp->length = 0;
}
}
-irqreturn_t gfar_receive(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t gfar_receive(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
struct gfar_private *priv = netdev_priv(dev);
-
#ifdef CONFIG_GFAR_NAPI
u32 tempval;
+#else
+ unsigned long flags;
#endif
/* Clear IEVENT, so rx interrupt isn't called again
}
#else
- spin_lock(&priv->lock);
+ spin_lock_irqsave(&priv->rxlock, flags);
gfar_clean_rx_ring(dev, priv->rx_ring_size);
/* If we are coalescing interrupts, update the timer */
else
gfar_write(&priv->regs->rxic, 0);
- spin_unlock(&priv->lock);
+ spin_unlock_irqrestore(&priv->rxlock, flags);
#endif
return IRQ_HANDLED;
/* If valid headers were found, and valid sums
* were verified, then we tell the kernel that no
* checksumming is necessary. Otherwise, it is */
- if (fcb->cip && !fcb->eip && fcb->ctu && !fcb->etu)
+ if ((fcb->flags & RXFCB_CSUM_MASK) == (RXFCB_CIP | RXFCB_CTU))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
skb->protocol = eth_type_trans(skb, dev);
/* Send the packet up the stack */
- if (unlikely(priv->vlgrp && fcb->vln))
+ if (unlikely(priv->vlgrp && (fcb->flags & RXFCB_VLN)))
ret = gfar_rx_vlan(skb, priv->vlgrp, fcb->vlctl);
else
ret = RECEIVE(skb);
/* Update the current rxbd pointer to be the next one */
priv->cur_rx = bdp;
- /* If no packets have arrived since the
- * last one we processed, clear the IEVENT RX and
- * BSY bits so that another interrupt won't be
- * generated when we set IMASK */
- if (bdp->status & RXBD_EMPTY)
- gfar_write(&priv->regs->ievent, IEVENT_RX_MASK);
-
return howmany;
}
rx_work_limit -= howmany;
*budget -= howmany;
- if (rx_work_limit >= 0) {
+ if (rx_work_limit > 0) {
netif_rx_complete(dev);
/* Clear the halt bit in RSTAT */
gfar_write(&priv->regs->rxic, 0);
}
- return (rx_work_limit < 0) ? 1 : 0;
+ /* Return 1 if there's more work to do */
+ return (rx_work_limit > 0) ? 0 : 1;
+}
+#endif
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void gfar_netpoll(struct net_device *dev)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+
+ /* If the device has multiple interrupts, run tx/rx */
+ if (priv->einfo->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+ disable_irq(priv->interruptTransmit);
+ disable_irq(priv->interruptReceive);
+ disable_irq(priv->interruptError);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptError);
+ enable_irq(priv->interruptReceive);
+ enable_irq(priv->interruptTransmit);
+ } else {
+ disable_irq(priv->interruptTransmit);
+ gfar_interrupt(priv->interruptTransmit, dev);
+ enable_irq(priv->interruptTransmit);
+ }
}
#endif
/* The interrupt handler for devices with one interrupt */
-static irqreturn_t gfar_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct gfar_private *priv = netdev_priv(dev);
/* Save ievent for future reference */
u32 events = gfar_read(&priv->regs->ievent);
- /* Clear IEVENT */
- gfar_write(&priv->regs->ievent, events);
-
/* Check for reception */
- if ((events & IEVENT_RXF0) || (events & IEVENT_RXB0))
- gfar_receive(irq, dev_id, regs);
+ if (events & IEVENT_RX_MASK)
+ gfar_receive(irq, dev_id);
/* Check for transmit completion */
- if ((events & IEVENT_TXF) || (events & IEVENT_TXB))
- gfar_transmit(irq, dev_id, regs);
-
- /* Update error statistics */
- if (events & IEVENT_TXE) {
- priv->stats.tx_errors++;
-
- if (events & IEVENT_LC)
- priv->stats.tx_window_errors++;
- if (events & IEVENT_CRL)
- priv->stats.tx_aborted_errors++;
- if (events & IEVENT_XFUN) {
- if (netif_msg_tx_err(priv))
- printk(KERN_WARNING "%s: tx underrun. dropped packet\n", dev->name);
- priv->stats.tx_dropped++;
- priv->extra_stats.tx_underrun++;
-
- /* Reactivate the Tx Queues */
- gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
- }
- }
- if (events & IEVENT_BSY) {
- priv->stats.rx_errors++;
- priv->extra_stats.rx_bsy++;
-
- gfar_receive(irq, dev_id, regs);
-
-#ifndef CONFIG_GFAR_NAPI
- /* Clear the halt bit in RSTAT */
- gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
-#endif
-
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
- dev->name,
- gfar_read(&priv->regs->rstat));
- }
- if (events & IEVENT_BABR) {
- priv->stats.rx_errors++;
- priv->extra_stats.rx_babr++;
-
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: babbling error\n", dev->name);
- }
- if (events & IEVENT_EBERR) {
- priv->extra_stats.eberr++;
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: EBERR\n", dev->name);
- }
- if ((events & IEVENT_RXC) && (netif_msg_rx_err(priv)))
- printk(KERN_DEBUG "%s: control frame\n", dev->name);
+ if (events & IEVENT_TX_MASK)
+ gfar_transmit(irq, dev_id);
- if (events & IEVENT_BABT) {
- priv->extra_stats.tx_babt++;
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: babt error\n", dev->name);
- }
+ /* Check for errors */
+ if (events & IEVENT_ERR_MASK)
+ gfar_error(irq, dev_id);
return IRQ_HANDLED;
}
static void adjust_link(struct net_device *dev)
{
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
unsigned long flags;
struct phy_device *phydev = priv->phydev;
int new_state = 0;
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->txlock, flags);
if (phydev->link) {
u32 tempval = gfar_read(®s->maccfg2);
+ u32 ecntrl = gfar_read(®s->ecntrl);
/* Now we make sure that we can be in full duplex mode.
* If not, we operate in half-duplex mode. */
case 10:
tempval =
((tempval & ~(MACCFG2_IF)) | MACCFG2_MII);
+
+ /* Reduced mode distinguishes
+ * between 10 and 100 */
+ if (phydev->speed == SPEED_100)
+ ecntrl |= ECNTRL_R100;
+ else
+ ecntrl &= ~(ECNTRL_R100);
break;
default:
if (netif_msg_link(priv))
}
gfar_write(®s->maccfg2, tempval);
+ gfar_write(®s->ecntrl, ecntrl);
if (!priv->oldlink) {
new_state = 1;
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->txlock, flags);
}
/* Update the hash table based on the current list of multicast
{
struct dev_mc_list *mc_ptr;
struct gfar_private *priv = netdev_priv(dev);
- struct gfar *regs = priv->regs;
+ struct gfar __iomem *regs = priv->regs;
u32 tempval;
if(dev->flags & IFF_PROMISC) {
- if (netif_msg_drv(priv))
- printk(KERN_INFO "%s: Entering promiscuous mode.\n",
- dev->name);
/* Set RCTRL to PROM */
tempval = gfar_read(®s->rctrl);
tempval |= RCTRL_PROM;
tempval &= ~(RCTRL_PROM);
gfar_write(®s->rctrl, tempval);
}
-
+
if(dev->flags & IFF_ALLMULTI) {
/* Set the hash to rx all multicast frames */
gfar_write(®s->igaddr0, 0xffffffff);
gfar_write(®s->gaddr6, 0xffffffff);
gfar_write(®s->gaddr7, 0xffffffff);
} else {
+ int em_num;
+ int idx;
+
/* zero out the hash */
gfar_write(®s->igaddr0, 0x0);
gfar_write(®s->igaddr1, 0x0);
gfar_write(®s->gaddr6, 0x0);
gfar_write(®s->gaddr7, 0x0);
+ /* If we have extended hash tables, we need to
+ * clear the exact match registers to prepare for
+ * setting them */
+ if (priv->extended_hash) {
+ em_num = GFAR_EM_NUM + 1;
+ gfar_clear_exact_match(dev);
+ idx = 1;
+ } else {
+ idx = 0;
+ em_num = 0;
+ }
+
if(dev->mc_count == 0)
return;
/* Parse the list, and set the appropriate bits */
for(mc_ptr = dev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
- gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
+ if (idx < em_num) {
+ gfar_set_mac_for_addr(dev, idx,
+ mc_ptr->dmi_addr);
+ idx++;
+ } else
+ gfar_set_hash_for_addr(dev, mc_ptr->dmi_addr);
}
}
return;
}
+
+/* Clears each of the exact match registers to zero, so they
+ * don't interfere with normal reception */
+static void gfar_clear_exact_match(struct net_device *dev)
+{
+ int idx;
+ u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
+
+ for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
+ gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
+}
+
/* Set the appropriate hash bit for the given addr */
/* The algorithm works like so:
* 1) Take the Destination Address (ie the multicast address), and
return;
}
+
+/* There are multiple MAC Address register pairs on some controllers
+ * This function sets the numth pair to a given address
+ */
+static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
+{
+ struct gfar_private *priv = netdev_priv(dev);
+ int idx;
+ char tmpbuf[MAC_ADDR_LEN];
+ u32 tempval;
+ u32 __iomem *macptr = &priv->regs->macstnaddr1;
+
+ macptr += num*2;
+
+ /* Now copy it into the mac registers backwards, cuz */
+ /* little endian is silly */
+ for (idx = 0; idx < MAC_ADDR_LEN; idx++)
+ tmpbuf[MAC_ADDR_LEN - 1 - idx] = addr[idx];
+
+ gfar_write(macptr, *((u32 *) (tmpbuf)));
+
+ tempval = *((u32 *) (tmpbuf + 4));
+
+ gfar_write(macptr+1, tempval);
+}
+
/* GFAR error interrupt handler */
-static irqreturn_t gfar_error(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t gfar_error(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
struct gfar_private *priv = netdev_priv(dev);
/* Hmm... */
if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
- dev->name, events, gfar_read(&priv->regs->imask));
+ dev->name, events, gfar_read(&priv->regs->imask));
/* Update the error counters */
if (events & IEVENT_TXE) {
priv->stats.tx_aborted_errors++;
if (events & IEVENT_XFUN) {
if (netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: underrun. packet dropped.\n",
- dev->name);
+ printk(KERN_DEBUG "%s: TX FIFO underrun, "
+ "packet dropped.\n", dev->name);
priv->stats.tx_dropped++;
priv->extra_stats.tx_underrun++;
priv->stats.rx_errors++;
priv->extra_stats.rx_bsy++;
- gfar_receive(irq, dev_id, regs);
+ gfar_receive(irq, dev_id);
#ifndef CONFIG_GFAR_NAPI
/* Clear the halt bit in RSTAT */
#endif
if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: busy error (rhalt: %x)\n",
- dev->name,
- gfar_read(&priv->regs->rstat));
+ printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
+ dev->name, gfar_read(&priv->regs->rstat));
}
if (events & IEVENT_BABR) {
priv->stats.rx_errors++;
priv->extra_stats.rx_babr++;
if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: babbling error\n", dev->name);
+ printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
}
if (events & IEVENT_EBERR) {
priv->extra_stats.eberr++;
if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: EBERR\n", dev->name);
+ printk(KERN_DEBUG "%s: bus error\n", dev->name);
}
if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
- if (netif_msg_rx_status(priv))
- printk(KERN_DEBUG "%s: control frame\n", dev->name);
+ printk(KERN_DEBUG "%s: control frame\n", dev->name);
if (events & IEVENT_BABT) {
priv->extra_stats.tx_babt++;
if (netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: babt error\n", dev->name);
+ printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
}
return IRQ_HANDLED;
}
/* Structure for a device driver */
-static struct device_driver gfar_driver = {
- .name = "fsl-gianfar",
- .bus = &platform_bus_type,
+static struct platform_driver gfar_driver = {
.probe = gfar_probe,
.remove = gfar_remove,
+ .driver = {
+ .name = "fsl-gianfar",
+ },
};
static int __init gfar_init(void)
if (err)
return err;
- err = driver_register(&gfar_driver);
+ err = platform_driver_register(&gfar_driver);
if (err)
gfar_mdio_exit();
-
+
return err;
}
static void __exit gfar_exit(void)
{
- driver_unregister(&gfar_driver);
+ platform_driver_unregister(&gfar_driver);
gfar_mdio_exit();
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff