*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#define DRV_NAME "8139too"
#define DRV_VERSION "0.9.28"
#include <linux/crc32.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/gfp.h>
#include <asm/irq.h>
#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
-#define PFX DRV_NAME ": "
/* Default Message level */
#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
#undef RTL8139_NDEBUG
-#if RTL8139_DEBUG
-/* note: prints function name for you */
-# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
-#else
-# define DPRINTK(fmt, args...)
-#endif
-
#ifdef RTL8139_NDEBUG
# define assert(expr) do {} while (0)
#else
# define assert(expr) \
- if(unlikely(!(expr))) { \
- printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr, __FILE__, __func__, __LINE__); \
+ if (unlikely(!(expr))) { \
+ pr_err("Assertion failed! %s,%s,%s,line=%d\n", \
+ #expr, __FILE__, __func__, __LINE__); \
}
#endif
};
-static struct pci_device_id rtl8139_pci_tbl[] = {
+static DEFINE_PCI_DEVICE_TABLE(rtl8139_pci_tbl) = {
{0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
{0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
{0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
static void rtl8139_start_thread(struct rtl8139_private *tp);
static void rtl8139_tx_timeout (struct net_device *dev);
static void rtl8139_init_ring (struct net_device *dev);
-static int rtl8139_start_xmit (struct sk_buff *skb,
- struct net_device *dev);
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void rtl8139_poll_controller(struct net_device *dev);
#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p);
static int rtl8139_poll(struct napi_struct *napi, int budget);
static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
static int rtl8139_close (struct net_device *dev);
}
-static int __devinit rtl8139_init_board (struct pci_dev *pdev,
- struct net_device **dev_out)
+static __devinit struct net_device * rtl8139_init_board (struct pci_dev *pdev)
{
void __iomem *ioaddr;
struct net_device *dev;
assert (pdev != NULL);
- *dev_out = NULL;
-
/* dev and priv zeroed in alloc_etherdev */
dev = alloc_etherdev (sizeof (*tp));
if (dev == NULL) {
dev_err(&pdev->dev, "Unable to alloc new net device\n");
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
}
SET_NETDEV_DEV(dev, &pdev->dev);
/* set this immediately, we need to know before
* we talk to the chip directly */
- DPRINTK("PIO region size == 0x%02X\n", pio_len);
- DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
+ pr_debug("PIO region size == 0x%02lX\n", pio_len);
+ pr_debug("MMIO region size == 0x%02lX\n", mmio_len);
retry:
if (use_io) {
}
/* if unknown chip, assume array element #0, original RTL-8139 in this case */
- dev_printk (KERN_DEBUG, &pdev->dev,
- "unknown chip version, assuming RTL-8139\n");
- dev_printk (KERN_DEBUG, &pdev->dev,
- "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
+ dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n");
+ dev_dbg(&pdev->dev, "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
tp->chipset = 0;
match:
- DPRINTK ("chipset id (%d) == index %d, '%s'\n",
+ pr_debug("chipset id (%d) == index %d, '%s'\n",
version, i, rtl_chip_info[i].name);
if (tp->chipset >= CH_8139B) {
u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
- DPRINTK("PCI PM wakeup\n");
+ pr_debug("PCI PM wakeup\n");
if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
(tmp8 & LWAKE))
new_tmp8 &= ~LWAKE;
}
}
} else {
- DPRINTK("Old chip wakeup\n");
+ pr_debug("Old chip wakeup\n");
tmp8 = RTL_R8 (Config1);
tmp8 &= ~(SLEEP | PWRDN);
RTL_W8 (Config1, tmp8);
rtl8139_chip_reset (ioaddr);
- *dev_out = dev;
- return 0;
+ return dev;
err_out:
__rtl8139_cleanup_dev (dev);
if (disable_dev_on_err)
pci_disable_device (pdev);
- return rc;
+ return ERR_PTR(rc);
}
+static const struct net_device_ops rtl8139_netdev_ops = {
+ .ndo_open = rtl8139_open,
+ .ndo_stop = rtl8139_close,
+ .ndo_get_stats = rtl8139_get_stats,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = rtl8139_set_mac_address,
+ .ndo_start_xmit = rtl8139_start_xmit,
+ .ndo_set_multicast_list = rtl8139_set_rx_mode,
+ .ndo_do_ioctl = netdev_ioctl,
+ .ndo_tx_timeout = rtl8139_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = rtl8139_poll_controller,
+#endif
+};
static int __devinit rtl8139_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int printed_version;
if (!printed_version++)
- printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+ pr_info(RTL8139_DRIVER_NAME "\n");
}
#endif
pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
- printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
+ pr_info("OQO Model 2 detected. Forcing PIO\n");
use_io = 1;
}
- i = rtl8139_init_board (pdev, &dev);
- if (i < 0)
- return i;
+ dev = rtl8139_init_board (pdev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
assert (dev != NULL);
tp = netdev_priv(dev);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
/* The Rtl8139-specific entries in the device structure. */
- dev->open = rtl8139_open;
- dev->hard_start_xmit = rtl8139_start_xmit;
- netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
- dev->stop = rtl8139_close;
- dev->get_stats = rtl8139_get_stats;
- dev->set_multicast_list = rtl8139_set_rx_mode;
- dev->do_ioctl = netdev_ioctl;
+ dev->netdev_ops = &rtl8139_netdev_ops;
dev->ethtool_ops = &rtl8139_ethtool_ops;
- dev->tx_timeout = rtl8139_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = rtl8139_poll_controller;
-#endif
+ netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
/* note: the hardware is not capable of sg/csum/highdma, however
* through the use of skb_copy_and_csum_dev we enable these
tp->mii.reg_num_mask = 0x1f;
/* dev is fully set up and ready to use now */
- DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
+ pr_debug("about to register device named %s (%p)...\n",
+ dev->name, dev);
i = register_netdev (dev);
if (i) goto err_out;
pci_set_drvdata (pdev, dev);
- printk (KERN_INFO "%s: %s at 0x%lx, "
- "%pM, IRQ %d\n",
- dev->name,
- board_info[ent->driver_data].name,
- dev->base_addr,
- dev->dev_addr,
- dev->irq);
+ netdev_info(dev, "%s at 0x%lx, %pM, IRQ %d\n",
+ board_info[ent->driver_data].name,
+ dev->base_addr, dev->dev_addr, dev->irq);
- printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n",
- dev->name, rtl_chip_info[tp->chipset].name);
+ netdev_dbg(dev, "Identified 8139 chip type '%s'\n",
+ rtl_chip_info[tp->chipset].name);
/* Find the connected MII xcvrs.
Doing this in open() would allow detecting external xcvrs later, but
if (mii_status != 0xffff && mii_status != 0x0000) {
u16 advertising = mdio_read(dev, phy, 4);
tp->phys[phy_idx++] = phy;
- printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
- "advertising %4.4x.\n",
- dev->name, phy, mii_status, advertising);
+ netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n",
+ phy, mii_status, advertising);
}
}
if (phy_idx == 0) {
- printk(KERN_INFO "%s: No MII transceivers found! Assuming SYM "
- "transceiver.\n",
- dev->name);
+ netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n");
tp->phys[0] = 32;
}
} else
if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
tp->mii.full_duplex = full_duplex[board_idx];
if (tp->mii.full_duplex) {
- printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
+ netdev_info(dev, "Media type forced to Full Duplex\n");
/* Changing the MII-advertised media because might prevent
re-connection. */
tp->mii.force_media = 1;
}
if (tp->default_port) {
- printk(KERN_INFO " Forcing %dMbps %s-duplex operation.\n",
- (option & 0x20 ? 100 : 10),
- (option & 0x10 ? "full" : "half"));
+ netdev_info(dev, " Forcing %dMbps %s-duplex operation\n",
+ (option & 0x20 ? 100 : 10),
+ (option & 0x10 ? "full" : "half"));
mdio_write(dev, tp->phys[0], 0,
((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
rtl8139_hw_start (dev);
netif_start_queue (dev);
- if (netif_msg_ifup(tp))
- printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
- " GP Pins %2.2x %s-duplex.\n", dev->name,
- (unsigned long long)pci_resource_start (tp->pci_dev, 1),
- dev->irq, RTL_R8 (MediaStatus),
- tp->mii.full_duplex ? "full" : "half");
+ netif_dbg(tp, ifup, dev,
+ "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n",
+ __func__,
+ (unsigned long long)pci_resource_start (tp->pci_dev, 1),
+ dev->irq, RTL_R8 (MediaStatus),
+ tp->mii.full_duplex ? "full" : "half");
rtl8139_start_thread(tp);
RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
+ tp->cur_rx = 0;
+
+ /* init Rx ring buffer DMA address */
+ RTL_W32_F (RxBuf, tp->rx_ring_dma);
+
/* Must enable Tx/Rx before setting transfer thresholds! */
RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
RTL_W32 (RxConfig, tp->rx_config);
RTL_W32 (TxConfig, rtl8139_tx_config);
- tp->cur_rx = 0;
-
rtl_check_media (dev, 1);
if (tp->chipset >= CH_8139B) {
RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
}
- DPRINTK("init buffer addresses\n");
+ netdev_dbg(dev, "init buffer addresses\n");
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
- /* init Rx ring buffer DMA address */
- RTL_W32_F (RxBuf, tp->rx_ring_dma);
-
/* init Tx buffer DMA addresses */
for (i = 0; i < NUM_TX_DESC; i++)
RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
if (!tp->mii.force_media && mii_lpa != 0xffff) {
- int duplex = (mii_lpa & LPA_100FULL)
- || (mii_lpa & 0x01C0) == 0x0040;
+ int duplex = ((mii_lpa & LPA_100FULL) ||
+ (mii_lpa & 0x01C0) == 0x0040);
if (tp->mii.full_duplex != duplex) {
tp->mii.full_duplex = duplex;
if (mii_lpa) {
- printk (KERN_INFO
- "%s: Setting %s-duplex based on MII #%d link"
- " partner ability of %4.4x.\n",
- dev->name,
- tp->mii.full_duplex ? "full" : "half",
- tp->phys[0], mii_lpa);
+ netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n",
+ tp->mii.full_duplex ? "full" : "half",
+ tp->phys[0], mii_lpa);
} else {
- printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
- dev->name);
+ netdev_info(dev, "media is unconnected, link down, or incompatible connection\n");
}
#if 0
RTL_W8 (Cfg9346, Cfg9346_Unlock);
rtl8139_tune_twister (dev, tp);
- DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
- dev->name, RTL_R16 (NWayLPAR));
- DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
- dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
- DPRINTK ("%s: Chip config %2.2x %2.2x.\n",
- dev->name, RTL_R8 (Config0),
- RTL_R8 (Config1));
+ netdev_dbg(dev, "Media selection tick, Link partner %04x\n",
+ RTL_R16(NWayLPAR));
+ netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n",
+ RTL_R16(IntrMask), RTL_R16(IntrStatus));
+ netdev_dbg(dev, "Chip config %02x %02x\n",
+ RTL_R8(Config0), RTL_R8(Config1));
}
static void rtl8139_thread (struct work_struct *work)
int i;
u8 tmp8;
- printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
- "media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
- RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
+ netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n",
+ RTL_R8(ChipCmd), RTL_R16(IntrStatus),
+ RTL_R16(IntrMask), RTL_R8(MediaStatus));
/* Emit info to figure out what went wrong. */
- printk (KERN_DEBUG "%s: Tx queue start entry %ld dirty entry %ld.\n",
- dev->name, tp->cur_tx, tp->dirty_tx);
+ netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n",
+ tp->cur_tx, tp->dirty_tx);
for (i = 0; i < NUM_TX_DESC; i++)
- printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n",
- dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
- i == tp->dirty_tx % NUM_TX_DESC ?
- " (queue head)" : "");
+ netdev_dbg(dev, "Tx descriptor %d is %08lx%s\n",
+ i, RTL_R32(TxStatus0 + (i * 4)),
+ i == tp->dirty_tx % NUM_TX_DESC ?
+ " (queue head)" : "");
tp->xstats.tx_timeouts++;
}
}
-static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
+static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
+ struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
} else {
dev_kfree_skb(skb);
dev->stats.tx_dropped++;
- return 0;
+ return NETDEV_TX_OK;
}
spin_lock_irqsave(&tp->lock, flags);
netif_stop_queue (dev);
spin_unlock_irqrestore(&tp->lock, flags);
- if (netif_msg_tx_queued(tp))
- printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
- dev->name, len, entry);
+ netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n",
+ len, entry);
- return 0;
+ return NETDEV_TX_OK;
}
/* Note: TxCarrierLost is always asserted at 100mbps. */
if (txstatus & (TxOutOfWindow | TxAborted)) {
/* There was an major error, log it. */
- if (netif_msg_tx_err(tp))
- printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
- dev->name, txstatus);
+ netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n",
+ txstatus);
dev->stats.tx_errors++;
if (txstatus & TxAborted) {
dev->stats.tx_aborted_errors++;
#ifndef RTL8139_NDEBUG
if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
- printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
- dev->name, dirty_tx, tp->cur_tx);
+ netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n",
+ dirty_tx, tp->cur_tx);
dirty_tx += NUM_TX_DESC;
}
#endif /* RTL8139_NDEBUG */
int tmp_work;
#endif
- if (netif_msg_rx_err (tp))
- printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
- dev->name, rx_status);
+ netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n",
+ rx_status);
dev->stats.rx_errors++;
if (!(rx_status & RxStatusOK)) {
if (rx_status & RxTooLong) {
- DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
- dev->name, rx_status);
+ netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n",
+ rx_status);
/* A.C.: The chip hangs here. */
}
if (rx_status & (RxBadSymbol | RxBadAlign))
break;
}
if (tmp_work <= 0)
- printk (KERN_WARNING PFX "rx stop wait too long\n");
+ netdev_warn(dev, "rx stop wait too long\n");
/* restart receive */
tmp_work = 200;
while (--tmp_work > 0) {
break;
}
if (tmp_work <= 0)
- printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
+ netdev_warn(dev, "tx/rx enable wait too long\n");
/* and reinitialize all rx related registers */
RTL_W8_F (Cfg9346, Cfg9346_Unlock);
RTL_W32 (RxConfig, tp->rx_config);
tp->cur_rx = 0;
- DPRINTK("init buffer addresses\n");
+ netdev_dbg(dev, "init buffer addresses\n");
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
unsigned int cur_rx = tp->cur_rx;
unsigned int rx_size = 0;
- DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
- RTL_R16 (RxBufAddr),
- RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
+ netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, (u16)cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
- while (netif_running(dev) && received < budget
- && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
+ while (netif_running(dev) && received < budget &&
+ (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
u32 ring_offset = cur_rx % RX_BUF_LEN;
u32 rx_status;
unsigned int pkt_size;
rx_size = rx_status >> 16;
pkt_size = rx_size - 4;
- if (netif_msg_rx_status(tp))
- printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, size %4.4x,"
- " cur %4.4x.\n", dev->name, rx_status,
- rx_size, cur_rx);
+ netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n",
+ __func__, rx_status, rx_size, cur_rx);
#if RTL8139_DEBUG > 2
- {
- int i;
- DPRINTK ("%s: Frame contents ", dev->name);
- for (i = 0; i < 70; i++)
- printk (" %2.2x",
- rx_ring[ring_offset + i]);
- printk (".\n");
- }
+ print_hex_dump(KERN_DEBUG, "Frame contents: ",
+ DUMP_PREFIX_OFFSET, 16, 1,
+ &rx_ring[ring_offset], 70, true);
#endif
/* Packet copy from FIFO still in progress.
if (!tp->fifo_copy_timeout)
tp->fifo_copy_timeout = jiffies + 2;
else if (time_after(jiffies, tp->fifo_copy_timeout)) {
- DPRINTK ("%s: hung FIFO. Reset.", dev->name);
+ netdev_dbg(dev, "hung FIFO. Reset\n");
rx_size = 0;
goto no_early_rx;
}
- if (netif_msg_intr(tp)) {
- printk(KERN_DEBUG "%s: fifo copy in progress.",
- dev->name);
- }
+ netif_dbg(tp, intr, dev, "fifo copy in progress\n");
tp->xstats.early_rx++;
break;
}
/* Malloc up new buffer, compatible with net-2e. */
/* Omit the four octet CRC from the length. */
- skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+ skb = netdev_alloc_skb_ip_align(dev, pkt_size);
if (likely(skb)) {
- skb_reserve (skb, NET_IP_ALIGN); /* 16 byte align the IP fields. */
#if RX_BUF_IDX == 3
wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
#else
skb->protocol = eth_type_trans (skb, dev);
- dev->last_rx = jiffies;
dev->stats.rx_bytes += pkt_size;
dev->stats.rx_packets++;
netif_receive_skb (skb);
} else {
if (net_ratelimit())
- printk (KERN_WARNING
- "%s: Memory squeeze, dropping packet.\n",
- dev->name);
+ netdev_warn(dev, "Memory squeeze, dropping packet\n");
dev->stats.rx_dropped++;
}
received++;
if (unlikely(!received || rx_size == 0xfff0))
rtl8139_isr_ack(tp);
-#if RTL8139_DEBUG > 1
- DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
- " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
- RTL_R16 (RxBufAddr),
- RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
-#endif
+ netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n",
+ __func__, cur_rx,
+ RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd));
tp->cur_rx = cur_rx;
void __iomem *ioaddr,
int status, int link_changed)
{
- DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
- dev->name, status);
+ netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status);
assert (dev != NULL);
assert (tp != NULL);
pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
- printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
- dev->name, pci_cmd_status);
+ netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status);
}
}
*/
spin_lock_irqsave(&tp->lock, flags);
RTL_W16_F(IntrMask, rtl8139_intr_mask);
- __netif_rx_complete(dev, napi);
+ __napi_complete(napi);
spin_unlock_irqrestore(&tp->lock, flags);
}
spin_unlock(&tp->rx_lock);
/* Receive packets are processed by poll routine.
If not running start it now. */
if (status & RxAckBits){
- if (netif_rx_schedule_prep(dev, &tp->napi)) {
+ if (napi_schedule_prep(&tp->napi)) {
RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
- __netif_rx_schedule(dev, &tp->napi);
+ __napi_schedule(&tp->napi);
}
}
out:
spin_unlock (&tp->lock);
- DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
- dev->name, RTL_R16 (IntrStatus));
+ netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n",
+ RTL_R16(IntrStatus));
return IRQ_RETVAL(handled);
}
}
#endif
+static int rtl8139_set_mac_address(struct net_device *dev, void *p)
+{
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ spin_lock_irq(&tp->lock);
+
+ RTL_W8_F(Cfg9346, Cfg9346_Unlock);
+ RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0)));
+ RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4)));
+ RTL_W8_F(Cfg9346, Cfg9346_Lock);
+
+ spin_unlock_irq(&tp->lock);
+
+ return 0;
+}
+
static int rtl8139_close (struct net_device *dev)
{
struct rtl8139_private *tp = netdev_priv(dev);
netif_stop_queue(dev);
napi_disable(&tp->napi);
- if (netif_msg_ifdown(tp))
- printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
- dev->name, RTL_R16 (IntrStatus));
+ netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n",
+ RTL_R16(IntrStatus));
spin_lock_irqsave (&tp->lock, flags);
other threads or interrupts aren't messing with the 8139. */
static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct rtl8139_private *np = netdev_priv(dev);
- void __iomem *ioaddr = np->mmio_addr;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
- spin_lock_irq(&np->lock);
- if (rtl_chip_info[np->chipset].flags & HasLWake) {
+ spin_lock_irq(&tp->lock);
+ if (rtl_chip_info[tp->chipset].flags & HasLWake) {
u8 cfg3 = RTL_R8 (Config3);
u8 cfg5 = RTL_R8 (Config5);
if (cfg5 & Cfg5_BWF)
wol->wolopts |= WAKE_BCAST;
}
- spin_unlock_irq(&np->lock);
+ spin_unlock_irq(&tp->lock);
}
aren't messing with the 8139. */
static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
- struct rtl8139_private *np = netdev_priv(dev);
- void __iomem *ioaddr = np->mmio_addr;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ void __iomem *ioaddr = tp->mmio_addr;
u32 support;
u8 cfg3, cfg5;
- support = ((rtl_chip_info[np->chipset].flags & HasLWake)
+ support = ((rtl_chip_info[tp->chipset].flags & HasLWake)
? (WAKE_PHY | WAKE_MAGIC
| WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
: 0);
if (wol->wolopts & ~support)
return -EINVAL;
- spin_lock_irq(&np->lock);
+ spin_lock_irq(&tp->lock);
cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
if (wol->wolopts & WAKE_PHY)
cfg3 |= Cfg3_LinkUp;
if (wol->wolopts & WAKE_BCAST)
cfg5 |= Cfg5_BWF;
RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
- spin_unlock_irq(&np->lock);
+ spin_unlock_irq(&tp->lock);
return 0;
}
static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
- struct rtl8139_private *np = netdev_priv(dev);
+ struct rtl8139_private *tp = netdev_priv(dev);
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
- strcpy(info->bus_info, pci_name(np->pci_dev));
- info->regdump_len = np->regs_len;
+ strcpy(info->bus_info, pci_name(tp->pci_dev));
+ info->regdump_len = tp->regs_len;
}
static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct rtl8139_private *np = netdev_priv(dev);
- spin_lock_irq(&np->lock);
- mii_ethtool_gset(&np->mii, cmd);
- spin_unlock_irq(&np->lock);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ spin_lock_irq(&tp->lock);
+ mii_ethtool_gset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
return 0;
}
static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- struct rtl8139_private *np = netdev_priv(dev);
+ struct rtl8139_private *tp = netdev_priv(dev);
int rc;
- spin_lock_irq(&np->lock);
- rc = mii_ethtool_sset(&np->mii, cmd);
- spin_unlock_irq(&np->lock);
+ spin_lock_irq(&tp->lock);
+ rc = mii_ethtool_sset(&tp->mii, cmd);
+ spin_unlock_irq(&tp->lock);
return rc;
}
static int rtl8139_nway_reset(struct net_device *dev)
{
- struct rtl8139_private *np = netdev_priv(dev);
- return mii_nway_restart(&np->mii);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_nway_restart(&tp->mii);
}
static u32 rtl8139_get_link(struct net_device *dev)
{
- struct rtl8139_private *np = netdev_priv(dev);
- return mii_link_ok(&np->mii);
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return mii_link_ok(&tp->mii);
}
static u32 rtl8139_get_msglevel(struct net_device *dev)
{
- struct rtl8139_private *np = netdev_priv(dev);
- return np->msg_enable;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ return tp->msg_enable;
}
static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
{
- struct rtl8139_private *np = netdev_priv(dev);
- np->msg_enable = datum;
+ struct rtl8139_private *tp = netdev_priv(dev);
+ tp->msg_enable = datum;
}
static int rtl8139_get_regs_len(struct net_device *dev)
{
- struct rtl8139_private *np;
+ struct rtl8139_private *tp;
/* TODO: we are too slack to do reg dumping for pio, for now */
if (use_io)
return 0;
- np = netdev_priv(dev);
- return np->regs_len;
+ tp = netdev_priv(dev);
+ return tp->regs_len;
}
static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
{
- struct rtl8139_private *np;
+ struct rtl8139_private *tp;
/* TODO: we are too slack to do reg dumping for pio, for now */
if (use_io)
return;
- np = netdev_priv(dev);
+ tp = netdev_priv(dev);
regs->version = RTL_REGS_VER;
- spin_lock_irq(&np->lock);
- memcpy_fromio(regbuf, np->mmio_addr, regs->len);
- spin_unlock_irq(&np->lock);
+ spin_lock_irq(&tp->lock);
+ memcpy_fromio(regbuf, tp->mmio_addr, regs->len);
+ spin_unlock_irq(&tp->lock);
}
static int rtl8139_get_sset_count(struct net_device *dev, int sset)
static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
{
- struct rtl8139_private *np = netdev_priv(dev);
+ struct rtl8139_private *tp = netdev_priv(dev);
- data[0] = np->xstats.early_rx;
- data[1] = np->xstats.tx_buf_mapped;
- data[2] = np->xstats.tx_timeouts;
- data[3] = np->xstats.rx_lost_in_ring;
+ data[0] = tp->xstats.early_rx;
+ data[1] = tp->xstats.tx_buf_mapped;
+ data[2] = tp->xstats.tx_timeouts;
+ data[3] = tp->xstats.rx_lost_in_ring;
}
static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
- struct rtl8139_private *np = netdev_priv(dev);
+ struct rtl8139_private *tp = netdev_priv(dev);
int rc;
if (!netif_running(dev))
return -EINVAL;
- spin_lock_irq(&np->lock);
- rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
- spin_unlock_irq(&np->lock);
+ spin_lock_irq(&tp->lock);
+ rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL);
+ spin_unlock_irq(&tp->lock);
return rc;
}
struct rtl8139_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->mmio_addr;
u32 mc_filter[2]; /* Multicast hash filter */
- int i, rx_mode;
+ int rx_mode;
u32 tmp;
- DPRINTK ("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
- dev->name, dev->flags, RTL_R32 (RxConfig));
+ netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08lx\n",
+ dev->flags, RTL_R32(RxConfig));
/* Note: do not reorder, GCC is clever about common statements. */
if (dev->flags & IFF_PROMISC) {
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
AcceptAllPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
- } else if ((dev->mc_count > multicast_filter_limit)
- || (dev->flags & IFF_ALLMULTI)) {
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
/* Too many to filter perfectly -- accept all multicasts. */
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
struct dev_mc_list *mclist;
rx_mode = AcceptBroadcast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0;
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
+ netdev_for_each_mc_addr(mclist, dev) {
int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
* even if no 8139 board is found.
*/
#ifdef MODULE
- printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
+ pr_info(RTL8139_DRIVER_NAME "\n");
#endif
return pci_register_driver(&rtl8139_pci_driver);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff