/*
* linux/drivers/mmc/host/sdhci.c - Secure Digital Host Controller Interface driver
*
- * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
+ *
+ * Thanks to the following companies for their support:
+ *
+ * - JMicron (hardware and technical support)
*/
#include <linux/delay.h>
#include <linux/highmem.h>
-#include <linux/pci.h>
+#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
-#include <linux/mmc/host.h>
+#include <linux/leds.h>
-#include <asm/scatterlist.h>
+#include <linux/mmc/host.h>
#include "sdhci.h"
#define DBG(f, x...) \
pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
-static unsigned int debug_quirks = 0;
-
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0)
-#define SDHCI_QUIRK_FORCE_DMA (1<<1)
-/* Controller doesn't like some resets when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4)
-#define SDHCI_QUIRK_BROKEN_DMA (1<<5)
-
-static const struct pci_device_id pci_ids[] __devinitdata = {
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C822,
- .subvendor = PCI_VENDOR_ID_IBM,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_CLOCK_BEFORE_RESET |
- SDHCI_QUIRK_FORCE_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_RICOH,
- .device = PCI_DEVICE_ID_RICOH_R5C822,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_FORCE_DMA |
- SDHCI_QUIRK_NO_CARD_NO_RESET,
- },
-
- {
- .vendor = PCI_VENDOR_ID_TI,
- .device = PCI_DEVICE_ID_TI_XX21_XX11_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_FORCE_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB712_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB712_SD_2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_BROKEN_DMA,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB714_SD,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
- },
-
- {
- .vendor = PCI_VENDOR_ID_ENE,
- .device = PCI_DEVICE_ID_ENE_CB714_SD_2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE |
- SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS,
- },
-
- { /* Generic SD host controller */
- PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
- },
-
- { /* end: all zeroes */ },
-};
+#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
+ defined(CONFIG_MMC_SDHCI_MODULE))
+#define SDHCI_USE_LEDS_CLASS
+#endif
-MODULE_DEVICE_TABLE(pci, pci_ids);
+static unsigned int debug_quirks = 0;
static void sdhci_prepare_data(struct sdhci_host *, struct mmc_data *);
static void sdhci_finish_data(struct sdhci_host *);
printk(KERN_DEBUG DRIVER_NAME ": ============== REGISTER DUMP ==============\n");
printk(KERN_DEBUG DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
- readl(host->ioaddr + SDHCI_DMA_ADDRESS),
- readw(host->ioaddr + SDHCI_HOST_VERSION));
+ sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ sdhci_readw(host, SDHCI_HOST_VERSION));
printk(KERN_DEBUG DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
- readw(host->ioaddr + SDHCI_BLOCK_SIZE),
- readw(host->ioaddr + SDHCI_BLOCK_COUNT));
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
printk(KERN_DEBUG DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ARGUMENT),
- readw(host->ioaddr + SDHCI_TRANSFER_MODE));
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
printk(KERN_DEBUG DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
- readl(host->ioaddr + SDHCI_PRESENT_STATE),
- readb(host->ioaddr + SDHCI_HOST_CONTROL));
+ sdhci_readl(host, SDHCI_PRESENT_STATE),
+ sdhci_readb(host, SDHCI_HOST_CONTROL));
printk(KERN_DEBUG DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
- readb(host->ioaddr + SDHCI_POWER_CONTROL),
- readb(host->ioaddr + SDHCI_BLOCK_GAP_CONTROL));
+ sdhci_readb(host, SDHCI_POWER_CONTROL),
+ sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
printk(KERN_DEBUG DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
- readb(host->ioaddr + SDHCI_WAKE_UP_CONTROL),
- readw(host->ioaddr + SDHCI_CLOCK_CONTROL));
+ sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+ sdhci_readw(host, SDHCI_CLOCK_CONTROL));
printk(KERN_DEBUG DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
- readb(host->ioaddr + SDHCI_TIMEOUT_CONTROL),
- readl(host->ioaddr + SDHCI_INT_STATUS));
+ sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+ sdhci_readl(host, SDHCI_INT_STATUS));
printk(KERN_DEBUG DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
- readl(host->ioaddr + SDHCI_INT_ENABLE),
- readl(host->ioaddr + SDHCI_SIGNAL_ENABLE));
+ sdhci_readl(host, SDHCI_INT_ENABLE),
+ sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
printk(KERN_DEBUG DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
- readw(host->ioaddr + SDHCI_ACMD12_ERR),
- readw(host->ioaddr + SDHCI_SLOT_INT_STATUS));
+ sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
printk(KERN_DEBUG DRIVER_NAME ": Caps: 0x%08x | Max curr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_CAPABILITIES),
- readl(host->ioaddr + SDHCI_MAX_CURRENT));
+ sdhci_readl(host, SDHCI_CAPABILITIES),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+
+ if (host->flags & SDHCI_USE_ADMA)
+ printk(KERN_DEBUG DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
printk(KERN_DEBUG DRIVER_NAME ": ===========================================\n");
}
* *
\*****************************************************************************/
+static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+ u32 ier;
+
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+ ier &= ~clear;
+ ier |= set;
+ sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+ sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_unmask_irqs(struct sdhci_host *host, u32 irqs)
+{
+ sdhci_clear_set_irqs(host, 0, irqs);
+}
+
+static void sdhci_mask_irqs(struct sdhci_host *host, u32 irqs)
+{
+ sdhci_clear_set_irqs(host, irqs, 0);
+}
+
+static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
+{
+ u32 irqs = SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT;
+
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ return;
+
+ if (enable)
+ sdhci_unmask_irqs(host, irqs);
+ else
+ sdhci_mask_irqs(host, irqs);
+}
+
+static void sdhci_enable_card_detection(struct sdhci_host *host)
+{
+ sdhci_set_card_detection(host, true);
+}
+
+static void sdhci_disable_card_detection(struct sdhci_host *host)
+{
+ sdhci_set_card_detection(host, false);
+}
+
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
unsigned long timeout;
+ u32 uninitialized_var(ier);
- if (host->chip->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) &
+ if (host->quirks & SDHCI_QUIRK_NO_CARD_NO_RESET) {
+ if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) &
SDHCI_CARD_PRESENT))
return;
}
- writeb(mask, host->ioaddr + SDHCI_SOFTWARE_RESET);
+ if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
+ ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+
+ sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
if (mask & SDHCI_RESET_ALL)
host->clock = 0;
timeout = 100;
/* hw clears the bit when it's done */
- while (readb(host->ioaddr + SDHCI_SOFTWARE_RESET) & mask) {
+ while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) {
if (timeout == 0) {
printk(KERN_ERR "%s: Reset 0x%x never completed.\n",
mmc_hostname(host->mmc), (int)mask);
timeout--;
mdelay(1);
}
+
+ if (host->quirks & SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET)
+ sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK, ier);
}
static void sdhci_init(struct sdhci_host *host)
{
- u32 intmask;
-
sdhci_reset(host, SDHCI_RESET_ALL);
- intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+ sdhci_clear_set_irqs(host, SDHCI_INT_ALL_MASK,
+ SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
- SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
- SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL |
- SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
+ SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE);
+}
- writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
- writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
+static void sdhci_reinit(struct sdhci_host *host)
+{
+ sdhci_init(host);
+ sdhci_enable_card_detection(host);
}
static void sdhci_activate_led(struct sdhci_host *host)
{
u8 ctrl;
- ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl |= SDHCI_CTRL_LED;
- writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
static void sdhci_deactivate_led(struct sdhci_host *host)
{
u8 ctrl;
- ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_LED;
- writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
-/*****************************************************************************\
- * *
- * Core functions *
- * *
-\*****************************************************************************/
-
-static inline char* sdhci_sg_to_buffer(struct sdhci_host* host)
+#ifdef SDHCI_USE_LEDS_CLASS
+static void sdhci_led_control(struct led_classdev *led,
+ enum led_brightness brightness)
{
- return sg_virt(host->cur_sg);
-}
+ struct sdhci_host *host = container_of(led, struct sdhci_host, led);
+ unsigned long flags;
-static inline int sdhci_next_sg(struct sdhci_host* host)
-{
- /*
- * Skip to next SG entry.
- */
- host->cur_sg++;
- host->num_sg--;
+ spin_lock_irqsave(&host->lock, flags);
- /*
- * Any entries left?
- */
- if (host->num_sg > 0) {
- host->offset = 0;
- host->remain = host->cur_sg->length;
- }
+ if (brightness == LED_OFF)
+ sdhci_deactivate_led(host);
+ else
+ sdhci_activate_led(host);
- return host->num_sg;
+ spin_unlock_irqrestore(&host->lock, flags);
}
+#endif
+
+/*****************************************************************************\
+ * *
+ * Core functions *
+ * *
+\*****************************************************************************/
static void sdhci_read_block_pio(struct sdhci_host *host)
{
- int blksize, chunk_remain;
- u32 data;
- char *buffer;
- int size;
+ unsigned long flags;
+ size_t blksize, len, chunk;
+ u32 uninitialized_var(scratch);
+ u8 *buf;
DBG("PIO reading\n");
blksize = host->data->blksz;
- chunk_remain = 0;
- data = 0;
+ chunk = 0;
- buffer = sdhci_sg_to_buffer(host) + host->offset;
+ local_irq_save(flags);
while (blksize) {
- if (chunk_remain == 0) {
- data = readl(host->ioaddr + SDHCI_BUFFER);
- chunk_remain = min(blksize, 4);
- }
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
- size = min(host->remain, chunk_remain);
+ len = min(host->sg_miter.length, blksize);
- chunk_remain -= size;
- blksize -= size;
- host->offset += size;
- host->remain -= size;
+ blksize -= len;
+ host->sg_miter.consumed = len;
- while (size) {
- *buffer = data & 0xFF;
- buffer++;
- data >>= 8;
- size--;
- }
+ buf = host->sg_miter.addr;
- if (host->remain == 0) {
- if (sdhci_next_sg(host) == 0) {
- BUG_ON(blksize != 0);
- return;
+ while (len) {
+ if (chunk == 0) {
+ scratch = sdhci_readl(host, SDHCI_BUFFER);
+ chunk = 4;
}
- buffer = sdhci_sg_to_buffer(host);
+
+ *buf = scratch & 0xFF;
+
+ buf++;
+ scratch >>= 8;
+ chunk--;
+ len--;
}
}
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
}
static void sdhci_write_block_pio(struct sdhci_host *host)
{
- int blksize, chunk_remain;
- u32 data;
- char *buffer;
- int bytes, size;
+ unsigned long flags;
+ size_t blksize, len, chunk;
+ u32 scratch;
+ u8 *buf;
DBG("PIO writing\n");
blksize = host->data->blksz;
- chunk_remain = 4;
- data = 0;
+ chunk = 0;
+ scratch = 0;
- bytes = 0;
- buffer = sdhci_sg_to_buffer(host) + host->offset;
+ local_irq_save(flags);
while (blksize) {
- size = min(host->remain, chunk_remain);
-
- chunk_remain -= size;
- blksize -= size;
- host->offset += size;
- host->remain -= size;
-
- while (size) {
- data >>= 8;
- data |= (u32)*buffer << 24;
- buffer++;
- size--;
- }
+ if (!sg_miter_next(&host->sg_miter))
+ BUG();
- if (chunk_remain == 0) {
- writel(data, host->ioaddr + SDHCI_BUFFER);
- chunk_remain = min(blksize, 4);
- }
+ len = min(host->sg_miter.length, blksize);
- if (host->remain == 0) {
- if (sdhci_next_sg(host) == 0) {
- BUG_ON(blksize != 0);
- return;
+ blksize -= len;
+ host->sg_miter.consumed = len;
+
+ buf = host->sg_miter.addr;
+
+ while (len) {
+ scratch |= (u32)*buf << (chunk * 8);
+
+ buf++;
+ chunk++;
+ len--;
+
+ if ((chunk == 4) || ((len == 0) && (blksize == 0))) {
+ sdhci_writel(host, scratch, SDHCI_BUFFER);
+ chunk = 0;
+ scratch = 0;
}
- buffer = sdhci_sg_to_buffer(host);
}
}
+
+ sg_miter_stop(&host->sg_miter);
+
+ local_irq_restore(flags);
}
static void sdhci_transfer_pio(struct sdhci_host *host)
BUG_ON(!host->data);
- if (host->num_sg == 0)
+ if (host->blocks == 0)
return;
if (host->data->flags & MMC_DATA_READ)
else
mask = SDHCI_SPACE_AVAILABLE;
- while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ /*
+ * Some controllers (JMicron JMB38x) mess up the buffer bits
+ * for transfers < 4 bytes. As long as it is just one block,
+ * we can ignore the bits.
+ */
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_SMALL_PIO) &&
+ (host->data->blocks == 1))
+ mask = ~0;
+
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
+ if (host->quirks & SDHCI_QUIRK_PIO_NEEDS_DELAY)
+ udelay(100);
+
if (host->data->flags & MMC_DATA_READ)
sdhci_read_block_pio(host);
else
sdhci_write_block_pio(host);
- if (host->num_sg == 0)
+ host->blocks--;
+ if (host->blocks == 0)
break;
}
DBG("PIO transfer complete.\n");
}
-static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
{
- u8 count;
- unsigned target_timeout, current_timeout;
+ local_irq_save(*flags);
+ return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
+}
- WARN_ON(host->data);
+static void sdhci_kunmap_atomic(void *buffer, unsigned long *flags)
+{
+ kunmap_atomic(buffer, KM_BIO_SRC_IRQ);
+ local_irq_restore(*flags);
+}
- if (data == NULL)
- return;
+static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
+{
+ __le32 *dataddr = (__le32 __force *)(desc + 4);
+ __le16 *cmdlen = (__le16 __force *)desc;
- /* Sanity checks */
- BUG_ON(data->blksz * data->blocks > 524288);
- BUG_ON(data->blksz > host->mmc->max_blk_size);
- BUG_ON(data->blocks > 65535);
+ /* SDHCI specification says ADMA descriptors should be 4 byte
+ * aligned, so using 16 or 32bit operations should be safe. */
- host->data = data;
- host->data_early = 0;
+ cmdlen[0] = cpu_to_le16(cmd);
+ cmdlen[1] = cpu_to_le16(len);
+
+ dataddr[0] = cpu_to_le32(addr);
+}
+
+static int sdhci_adma_table_pre(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ u8 *desc;
+ u8 *align;
+ dma_addr_t addr;
+ dma_addr_t align_addr;
+ int len, offset;
+
+ struct scatterlist *sg;
+ int i;
+ char *buffer;
+ unsigned long flags;
+
+ /*
+ * The spec does not specify endianness of descriptor table.
+ * We currently guess that it is LE.
+ */
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ /*
+ * The ADMA descriptor table is mapped further down as we
+ * need to fill it with data first.
+ */
+
+ host->align_addr = dma_map_single(mmc_dev(host->mmc),
+ host->align_buffer, 128 * 4, direction);
+ if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
+ goto fail;
+ BUG_ON(host->align_addr & 0x3);
+
+ host->sg_count = dma_map_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len, direction);
+ if (host->sg_count == 0)
+ goto unmap_align;
+
+ desc = host->adma_desc;
+ align = host->align_buffer;
+
+ align_addr = host->align_addr;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+
+ /*
+ * The SDHCI specification states that ADMA
+ * addresses must be 32-bit aligned. If they
+ * aren't, then we use a bounce buffer for
+ * the (up to three) bytes that screw up the
+ * alignment.
+ */
+ offset = (4 - (addr & 0x3)) & 0x3;
+ if (offset) {
+ if (data->flags & MMC_DATA_WRITE) {
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ memcpy(align, buffer, offset);
+ sdhci_kunmap_atomic(buffer, &flags);
+ }
+
+ /* tran, valid */
+ sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
+
+ BUG_ON(offset > 65536);
+
+ align += 4;
+ align_addr += 4;
+
+ desc += 8;
+
+ addr += offset;
+ len -= offset;
+ }
+
+ BUG_ON(len > 65536);
+
+ /* tran, valid */
+ sdhci_set_adma_desc(desc, addr, len, 0x21);
+ desc += 8;
+
+ /*
+ * If this triggers then we have a calculation bug
+ * somewhere. :/
+ */
+ WARN_ON((desc - host->adma_desc) > (128 * 2 + 1) * 4);
+ }
+
+ /*
+ * Add a terminating entry.
+ */
+
+ /* nop, end, valid */
+ sdhci_set_adma_desc(desc, 0, 0, 0x3);
+
+ /*
+ * Resync align buffer as we might have changed it.
+ */
+ if (data->flags & MMC_DATA_WRITE) {
+ dma_sync_single_for_device(mmc_dev(host->mmc),
+ host->align_addr, 128 * 4, direction);
+ }
+
+ host->adma_addr = dma_map_single(mmc_dev(host->mmc),
+ host->adma_desc, (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+ if (dma_mapping_error(mmc_dev(host->mmc), host->adma_addr))
+ goto unmap_entries;
+ BUG_ON(host->adma_addr & 0x3);
+
+ return 0;
+
+unmap_entries:
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+unmap_align:
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ 128 * 4, direction);
+fail:
+ return -EINVAL;
+}
+
+static void sdhci_adma_table_post(struct sdhci_host *host,
+ struct mmc_data *data)
+{
+ int direction;
+
+ struct scatterlist *sg;
+ int i, size;
+ u8 *align;
+ char *buffer;
+ unsigned long flags;
+
+ if (data->flags & MMC_DATA_READ)
+ direction = DMA_FROM_DEVICE;
+ else
+ direction = DMA_TO_DEVICE;
+
+ dma_unmap_single(mmc_dev(host->mmc), host->adma_addr,
+ (128 * 2 + 1) * 4, DMA_TO_DEVICE);
+
+ dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
+ 128 * 4, direction);
+
+ if (data->flags & MMC_DATA_READ) {
+ dma_sync_sg_for_cpu(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+
+ align = host->align_buffer;
+
+ for_each_sg(data->sg, sg, host->sg_count, i) {
+ if (sg_dma_address(sg) & 0x3) {
+ size = 4 - (sg_dma_address(sg) & 0x3);
+
+ buffer = sdhci_kmap_atomic(sg, &flags);
+ WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ memcpy(buffer, align, size);
+ sdhci_kunmap_atomic(buffer, &flags);
+
+ align += 4;
+ }
+ }
+ }
+
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, direction);
+}
+
+static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
+{
+ u8 count;
+ unsigned target_timeout, current_timeout;
+
+ /*
+ * If the host controller provides us with an incorrect timeout
+ * value, just skip the check and use 0xE. The hardware may take
+ * longer to time out, but that's much better than having a too-short
+ * timeout value.
+ */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
+ return 0xE;
/* timeout in us */
target_timeout = data->timeout_ns / 1000 +
data->timeout_clks / host->clock;
+ if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+ host->timeout_clk = host->clock / 1000;
+
/*
* Figure out needed cycles.
* We do this in steps in order to fit inside a 32 bit int.
count = 0xE;
}
- writeb(count, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+ return count;
+}
- if (host->flags & SDHCI_USE_DMA) {
- int count;
+static void sdhci_set_transfer_irqs(struct sdhci_host *host)
+{
+ u32 pio_irqs = SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL;
+ u32 dma_irqs = SDHCI_INT_DMA_END | SDHCI_INT_ADMA_ERROR;
- count = pci_map_sg(host->chip->pdev, data->sg, data->sg_len,
- (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
- BUG_ON(count != 1);
+ if (host->flags & SDHCI_REQ_USE_DMA)
+ sdhci_clear_set_irqs(host, pio_irqs, dma_irqs);
+ else
+ sdhci_clear_set_irqs(host, dma_irqs, pio_irqs);
+}
- writel(sg_dma_address(data->sg), host->ioaddr + SDHCI_DMA_ADDRESS);
- } else {
- host->cur_sg = data->sg;
- host->num_sg = data->sg_len;
+static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
+{
+ u8 count;
+ u8 ctrl;
+ int ret;
+
+ WARN_ON(host->data);
- host->offset = 0;
- host->remain = host->cur_sg->length;
+ if (data == NULL)
+ return;
+
+ /* Sanity checks */
+ BUG_ON(data->blksz * data->blocks > 524288);
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
+ BUG_ON(data->blocks > 65535);
+
+ host->data = data;
+ host->data_early = 0;
+
+ count = sdhci_calc_timeout(host, data);
+ sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL);
+
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))
+ host->flags |= SDHCI_REQ_USE_DMA;
+
+ /*
+ * FIXME: This doesn't account for merging when mapping the
+ * scatterlist.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_SIZE)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length & 0x3) {
+ DBG("Reverting to PIO because of "
+ "transfer size (%d)\n",
+ sg->length);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
}
+ /*
+ * The assumption here being that alignment is the same after
+ * translation to device address space.
+ */
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ int broken, i;
+ struct scatterlist *sg;
+
+ broken = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * As we use 3 byte chunks to work around
+ * alignment problems, we need to check this
+ * quirk.
+ */
+ if (host->quirks & SDHCI_QUIRK_32BIT_ADMA_SIZE)
+ broken = 1;
+ } else {
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR)
+ broken = 1;
+ }
+
+ if (unlikely(broken)) {
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 0x3) {
+ DBG("Reverting to PIO because of "
+ "bad alignment\n");
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ break;
+ }
+ }
+ }
+ }
+
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ if (host->flags & SDHCI_USE_ADMA) {
+ ret = sdhci_adma_table_pre(host, data);
+ if (ret) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ } else {
+ sdhci_writel(host, host->adma_addr,
+ SDHCI_ADMA_ADDRESS);
+ }
+ } else {
+ int sg_cnt;
+
+ sg_cnt = dma_map_sg(mmc_dev(host->mmc),
+ data->sg, data->sg_len,
+ (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE :
+ DMA_TO_DEVICE);
+ if (sg_cnt == 0) {
+ /*
+ * This only happens when someone fed
+ * us an invalid request.
+ */
+ WARN_ON(1);
+ host->flags &= ~SDHCI_REQ_USE_DMA;
+ } else {
+ WARN_ON(sg_cnt != 1);
+ sdhci_writel(host, sg_dma_address(data->sg),
+ SDHCI_DMA_ADDRESS);
+ }
+ }
+ }
+
+ /*
+ * Always adjust the DMA selection as some controllers
+ * (e.g. JMicron) can't do PIO properly when the selection
+ * is ADMA.
+ */
+ if (host->version >= SDHCI_SPEC_200) {
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ if ((host->flags & SDHCI_REQ_USE_DMA) &&
+ (host->flags & SDHCI_USE_ADMA))
+ ctrl |= SDHCI_CTRL_ADMA32;
+ else
+ ctrl |= SDHCI_CTRL_SDMA;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+ }
+
+ if (!(host->flags & SDHCI_REQ_USE_DMA)) {
+ int flags;
+
+ flags = SG_MITER_ATOMIC;
+ if (host->data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+ host->blocks = data->blocks;
+ }
+
+ sdhci_set_transfer_irqs(host);
+
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
- writew(SDHCI_MAKE_BLKSZ(7, data->blksz),
- host->ioaddr + SDHCI_BLOCK_SIZE);
- writew(data->blocks, host->ioaddr + SDHCI_BLOCK_COUNT);
+ sdhci_writew(host, SDHCI_MAKE_BLKSZ(7, data->blksz), SDHCI_BLOCK_SIZE);
+ sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT);
}
static void sdhci_set_transfer_mode(struct sdhci_host *host,
mode |= SDHCI_TRNS_MULTI;
if (data->flags & MMC_DATA_READ)
mode |= SDHCI_TRNS_READ;
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & SDHCI_REQ_USE_DMA)
mode |= SDHCI_TRNS_DMA;
- writew(mode, host->ioaddr + SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode, SDHCI_TRANSFER_MODE);
}
static void sdhci_finish_data(struct sdhci_host *host)
{
struct mmc_data *data;
- u16 blocks;
BUG_ON(!host->data);
data = host->data;
host->data = NULL;
- if (host->flags & SDHCI_USE_DMA) {
- pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
- (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
+ if (host->flags & SDHCI_REQ_USE_DMA) {
+ if (host->flags & SDHCI_USE_ADMA)
+ sdhci_adma_table_post(host, data);
+ else {
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len, (data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ }
}
/*
- * Controller doesn't count down when in single block mode.
+ * The specification states that the block count register must
+ * be updated, but it does not specify at what point in the
+ * data flow. That makes the register entirely useless to read
+ * back so we have to assume that nothing made it to the card
+ * in the event of an error.
*/
- if (data->blocks == 1)
- blocks = (data->error == 0) ? 0 : 1;
+ if (data->error)
+ data->bytes_xfered = 0;
else
- blocks = readw(host->ioaddr + SDHCI_BLOCK_COUNT);
- data->bytes_xfered = data->blksz * (data->blocks - blocks);
-
- if (!data->error && blocks) {
- printk(KERN_ERR "%s: Controller signalled completion even "
- "though there were blocks left.\n",
- mmc_hostname(host->mmc));
- data->error = -EIO;
- }
+ data->bytes_xfered = data->blksz * data->blocks;
if (data->stop) {
/*
if (host->mrq->data && (cmd == host->mrq->data->stop))
mask &= ~SDHCI_DATA_INHIBIT;
- while (readl(host->ioaddr + SDHCI_PRESENT_STATE) & mask) {
+ while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
printk(KERN_ERR "%s: Controller never released "
"inhibit bit(s).\n", mmc_hostname(host->mmc));
sdhci_prepare_data(host, cmd->data);
- writel(cmd->arg, host->ioaddr + SDHCI_ARGUMENT);
+ sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
sdhci_set_transfer_mode(host, cmd->data);
if (cmd->data)
flags |= SDHCI_CMD_DATA;
- writew(SDHCI_MAKE_CMD(cmd->opcode, flags),
- host->ioaddr + SDHCI_COMMAND);
+ sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
}
static void sdhci_finish_command(struct sdhci_host *host)
if (host->cmd->flags & MMC_RSP_136) {
/* CRC is stripped so we need to do some shifting. */
for (i = 0;i < 4;i++) {
- host->cmd->resp[i] = readl(host->ioaddr +
+ host->cmd->resp[i] = sdhci_readl(host,
SDHCI_RESPONSE + (3-i)*4) << 8;
if (i != 3)
host->cmd->resp[i] |=
- readb(host->ioaddr +
+ sdhci_readb(host,
SDHCI_RESPONSE + (3-i)*4-1);
}
} else {
- host->cmd->resp[0] = readl(host->ioaddr + SDHCI_RESPONSE);
+ host->cmd->resp[0] = sdhci_readl(host, SDHCI_RESPONSE);
}
}
if (clock == host->clock)
return;
- writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+ if (host->ops->set_clock) {
+ host->ops->set_clock(host, clock);
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
+ return;
+ }
+
+ sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
goto out;
clk = div << SDHCI_DIVIDER_SHIFT;
clk |= SDHCI_CLOCK_INT_EN;
- writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
- /* Wait max 10 ms */
- timeout = 10;
- while (!((clk = readw(host->ioaddr + SDHCI_CLOCK_CONTROL))
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
printk(KERN_ERR "%s: Internal clock never "
}
clk |= SDHCI_CLOCK_CARD_EN;
- writew(clk, host->ioaddr + SDHCI_CLOCK_CONTROL);
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
out:
host->clock = clock;
{
u8 pwr;
- if (host->power == power)
+ if (power == (unsigned short)-1)
+ pwr = 0;
+ else {
+ switch (1 << power) {
+ case MMC_VDD_165_195:
+ pwr = SDHCI_POWER_180;
+ break;
+ case MMC_VDD_29_30:
+ case MMC_VDD_30_31:
+ pwr = SDHCI_POWER_300;
+ break;
+ case MMC_VDD_32_33:
+ case MMC_VDD_33_34:
+ pwr = SDHCI_POWER_330;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ if (host->pwr == pwr)
return;
- if (power == (unsigned short)-1) {
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
- goto out;
+ host->pwr = pwr;
+
+ if (pwr == 0) {
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
+ return;
}
/*
* Spec says that we should clear the power reg before setting
* a new value. Some controllers don't seem to like this though.
*/
- if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
- pwr = SDHCI_POWER_ON;
-
- switch (1 << power) {
- case MMC_VDD_165_195:
- pwr |= SDHCI_POWER_180;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- pwr |= SDHCI_POWER_300;
- break;
- case MMC_VDD_32_33:
- case MMC_VDD_33_34:
- pwr |= SDHCI_POWER_330;
- break;
- default:
- BUG();
- }
+ if (!(host->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
- writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL);
+ /*
+ * At least the Marvell CaFe chip gets confused if we set the voltage
+ * and set turn on power at the same time, so set the voltage first.
+ */
+ if (host->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
-out:
- host->power = power;
+ pwr |= SDHCI_POWER_ON;
+
+ sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+
+ /*
+ * Some controllers need an extra 10ms delay of 10ms before they
+ * can apply clock after applying power
+ */
+ if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER)
+ mdelay(10);
}
/*****************************************************************************\
static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct sdhci_host *host;
+ bool present;
unsigned long flags;
host = mmc_priv(mmc);
WARN_ON(host->mrq != NULL);
+#ifndef SDHCI_USE_LEDS_CLASS
sdhci_activate_led(host);
+#endif
host->mrq = mrq;
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+ /* If polling, assume that the card is always present. */
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ present = true;
+ else
+ present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
+ SDHCI_CARD_PRESENT;
+
+ if (!present || host->flags & SDHCI_DEVICE_DEAD) {
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else
spin_lock_irqsave(&host->lock, flags);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ goto out;
+
/*
* Reset the chip on each power off.
* Should clear out any weird states.
*/
if (ios->power_mode == MMC_POWER_OFF) {
- writel(0, host->ioaddr + SDHCI_SIGNAL_ENABLE);
- sdhci_init(host);
+ sdhci_writel(host, 0, SDHCI_SIGNAL_ENABLE);
+ sdhci_reinit(host);
}
sdhci_set_clock(host, ios->clock);
else
sdhci_set_power(host, ios->vdd);
- ctrl = readb(host->ioaddr + SDHCI_HOST_CONTROL);
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
if (ios->bus_width == MMC_BUS_WIDTH_4)
ctrl |= SDHCI_CTRL_4BITBUS;
else
ctrl &= ~SDHCI_CTRL_HISPD;
- writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
/*
* Some (ENE) controllers go apeshit on some ios operation,
* signalling timeout and CRC errors even on CMD0. Resetting
* it on each ios seems to solve the problem.
*/
- if(host->chip->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
+ if(host->quirks & SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS)
sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
}
spin_lock_irqsave(&host->lock, flags);
- present = readl(host->ioaddr + SDHCI_PRESENT_STATE);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ present = 0;
+ else
+ present = sdhci_readl(host, SDHCI_PRESENT_STATE);
spin_unlock_irqrestore(&host->lock, flags);
+ if (host->quirks & SDHCI_QUIRK_INVERTED_WRITE_PROTECT)
+ return !!(present & SDHCI_WRITE_PROTECT);
return !(present & SDHCI_WRITE_PROTECT);
}
{
struct sdhci_host *host;
unsigned long flags;
- u32 ier;
host = mmc_priv(mmc);
spin_lock_irqsave(&host->lock, flags);
- ier = readl(host->ioaddr + SDHCI_INT_ENABLE);
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ goto out;
- ier &= ~SDHCI_INT_CARD_INT;
if (enable)
- ier |= SDHCI_INT_CARD_INT;
-
- writel(ier, host->ioaddr + SDHCI_INT_ENABLE);
- writel(ier, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
+ sdhci_unmask_irqs(host, SDHCI_INT_CARD_INT);
+ else
+ sdhci_mask_irqs(host, SDHCI_INT_CARD_INT);
+out:
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
spin_lock_irqsave(&host->lock, flags);
- if (!(readl(host->ioaddr + SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
+ if (!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT)) {
if (host->mrq) {
printk(KERN_ERR "%s: Card removed during transfer!\n",
mmc_hostname(host->mmc));
spin_unlock_irqrestore(&host->lock, flags);
- mmc_detect_change(host->mmc, msecs_to_jiffies(500));
+ mmc_detect_change(host->mmc, msecs_to_jiffies(200));
}
static void sdhci_tasklet_finish(unsigned long param)
* The controller needs a reset of internal state machines
* upon error conditions.
*/
- if (mrq->cmd->error ||
- (mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error)))) {
+ if (!(host->flags & SDHCI_DEVICE_DEAD) &&
+ (mrq->cmd->error ||
+ (mrq->data && (mrq->data->error ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
- if (host->chip->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
+ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) {
unsigned int clock;
/* This is to force an update */
host->cmd = NULL;
host->data = NULL;
+#ifndef SDHCI_USE_LEDS_CLASS
sdhci_deactivate_led(host);
+#endif
mmiowb();
spin_unlock_irqrestore(&host->lock, flags);
SDHCI_INT_INDEX))
host->cmd->error = -EILSEQ;
- if (host->cmd->error)
+ if (host->cmd->error) {
tasklet_schedule(&host->finish_tasklet);
- else if (intmask & SDHCI_INT_RESPONSE)
+ return;
+ }
+
+ /*
+ * The host can send and interrupt when the busy state has
+ * ended, allowing us to wait without wasting CPU cycles.
+ * Unfortunately this is overloaded on the "data complete"
+ * interrupt, so we need to take some care when handling
+ * it.
+ *
+ * Note: The 1.0 specification is a bit ambiguous about this
+ * feature so there might be some problems with older
+ * controllers.
+ */
+ if (host->cmd->flags & MMC_RSP_BUSY) {
+ if (host->cmd->data)
+ DBG("Cannot wait for busy signal when also "
+ "doing a data transfer");
+ else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
+ return;
+
+ /* The controller does not support the end-of-busy IRQ,
+ * fall through and take the SDHCI_INT_RESPONSE */
+ }
+
+ if (intmask & SDHCI_INT_RESPONSE)
sdhci_finish_command(host);
}
+#ifdef DEBUG
+static void sdhci_show_adma_error(struct sdhci_host *host)
+{
+ const char *name = mmc_hostname(host->mmc);
+ u8 *desc = host->adma_desc;
+ __le32 *dma;
+ __le16 *len;
+ u8 attr;
+
+ sdhci_dumpregs(host);
+
+ while (true) {
+ dma = (__le32 *)(desc + 4);
+ len = (__le16 *)(desc + 2);
+ attr = *desc;
+
+ DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+
+ desc += 8;
+
+ if (attr & 2)
+ break;
+ }
+}
+#else
+static void sdhci_show_adma_error(struct sdhci_host *host) { }
+#endif
+
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
{
BUG_ON(intmask == 0);
if (!host->data) {
/*
- * A data end interrupt is sent together with the response
- * for the stop command.
+ * The "data complete" interrupt is also used to
+ * indicate that a busy state has ended. See comment
+ * above in sdhci_cmd_irq().
*/
- if (intmask & SDHCI_INT_DATA_END)
- return;
+ if (host->cmd && (host->cmd->flags & MMC_RSP_BUSY)) {
+ if (intmask & SDHCI_INT_DATA_END) {
+ sdhci_finish_command(host);
+ return;
+ }
+ }
printk(KERN_ERR "%s: Got data interrupt 0x%08x even "
"though no data operation was in progress.\n",
host->data->error = -ETIMEDOUT;
else if (intmask & (SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_END_BIT))
host->data->error = -EILSEQ;
+ else if (intmask & SDHCI_INT_ADMA_ERROR) {
+ printk(KERN_ERR "%s: ADMA error\n", mmc_hostname(host->mmc));
+ sdhci_show_adma_error(host);
+ host->data->error = -EIO;
+ }
if (host->data->error)
sdhci_finish_data(host);
* we need to at least restart the transfer.
*/
if (intmask & SDHCI_INT_DMA_END)
- writel(readl(host->ioaddr + SDHCI_DMA_ADDRESS),
- host->ioaddr + SDHCI_DMA_ADDRESS);
+ sdhci_writel(host, sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ SDHCI_DMA_ADDRESS);
if (intmask & SDHCI_INT_DATA_END) {
if (host->cmd) {
spin_lock(&host->lock);
- intmask = readl(host->ioaddr + SDHCI_INT_STATUS);
+ intmask = sdhci_readl(host, SDHCI_INT_STATUS);
if (!intmask || intmask == 0xffffffff) {
result = IRQ_NONE;
goto out;
}
- DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
+ DBG("*** %s got interrupt: 0x%08x\n",
+ mmc_hostname(host->mmc), intmask);
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
- writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
- host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_writel(host, intmask & (SDHCI_INT_CARD_INSERT |
+ SDHCI_INT_CARD_REMOVE), SDHCI_INT_STATUS);
tasklet_schedule(&host->card_tasklet);
}
intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
if (intmask & SDHCI_INT_CMD_MASK) {
- writel(intmask & SDHCI_INT_CMD_MASK,
- host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK,
+ SDHCI_INT_STATUS);
sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
}
if (intmask & SDHCI_INT_DATA_MASK) {
- writel(intmask & SDHCI_INT_DATA_MASK,
- host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_writel(host, intmask & SDHCI_INT_DATA_MASK,
+ SDHCI_INT_STATUS);
sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
}
if (intmask & SDHCI_INT_BUS_POWER) {
printk(KERN_ERR "%s: Card is consuming too much power!\n",
mmc_hostname(host->mmc));
- writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_writel(host, SDHCI_INT_BUS_POWER, SDHCI_INT_STATUS);
}
intmask &= ~SDHCI_INT_BUS_POWER;
mmc_hostname(host->mmc), intmask);
sdhci_dumpregs(host);
- writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+ sdhci_writel(host, intmask, SDHCI_INT_STATUS);
}
result = IRQ_HANDLED;
#ifdef CONFIG_PM
-static int sdhci_suspend (struct pci_dev *pdev, pm_message_t state)
+int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state)
{
- struct sdhci_chip *chip;
- int i, ret;
-
- chip = pci_get_drvdata(pdev);
- if (!chip)
- return 0;
-
- DBG("Suspending...\n");
-
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- ret = mmc_suspend_host(chip->hosts[i]->mmc, state);
- if (ret) {
- for (i--;i >= 0;i--)
- mmc_resume_host(chip->hosts[i]->mmc);
- return ret;
- }
- }
+ int ret;
- pci_save_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+ sdhci_disable_card_detection(host);
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- free_irq(chip->hosts[i]->irq, chip->hosts[i]);
- }
+ ret = mmc_suspend_host(host->mmc, state);
+ if (ret)
+ return ret;
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ free_irq(host->irq, host);
return 0;
}
-static int sdhci_resume (struct pci_dev *pdev)
+EXPORT_SYMBOL_GPL(sdhci_suspend_host);
+
+int sdhci_resume_host(struct sdhci_host *host)
{
- struct sdhci_chip *chip;
- int i, ret;
+ int ret;
- chip = pci_get_drvdata(pdev);
- if (!chip)
- return 0;
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma)
+ host->ops->enable_dma(host);
+ }
- DBG("Resuming...\n");
+ ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
+ mmc_hostname(host->mmc), host);
+ if (ret)
+ return ret;
+
+ sdhci_init(host);
+ mmiowb();
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- ret = pci_enable_device(pdev);
+ ret = mmc_resume_host(host->mmc);
if (ret)
return ret;
- for (i = 0;i < chip->num_slots;i++) {
- if (!chip->hosts[i])
- continue;
- if (chip->hosts[i]->flags & SDHCI_USE_DMA)
- pci_set_master(pdev);
- ret = request_irq(chip->hosts[i]->irq, sdhci_irq,
- IRQF_SHARED, chip->hosts[i]->slot_descr,
- chip->hosts[i]);
- if (ret)
- return ret;
- sdhci_init(chip->hosts[i]);
- mmiowb();
- ret = mmc_resume_host(chip->hosts[i]->mmc);
- if (ret)
- return ret;
- }
+ sdhci_enable_card_detection(host);
return 0;
}
-#else /* CONFIG_PM */
-
-#define sdhci_suspend NULL
-#define sdhci_resume NULL
+EXPORT_SYMBOL_GPL(sdhci_resume_host);
#endif /* CONFIG_PM */
/*****************************************************************************\
* *
- * Device probing/removal *
+ * Device allocation/registration *
* *
\*****************************************************************************/
-static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
+struct sdhci_host *sdhci_alloc_host(struct device *dev,
+ size_t priv_size)
{
- int ret;
- unsigned int version;
- struct sdhci_chip *chip;
struct mmc_host *mmc;
struct sdhci_host *host;
- u8 first_bar;
- unsigned int caps;
+ WARN_ON(dev == NULL);
- chip = pci_get_drvdata(pdev);
- BUG_ON(!chip);
-
- ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &first_bar);
- if (ret)
- return ret;
-
- first_bar &= PCI_SLOT_INFO_FIRST_BAR_MASK;
-
- if (first_bar > 5) {
- printk(KERN_ERR DRIVER_NAME ": Invalid first BAR. Aborting.\n");
- return -ENODEV;
- }
-
- if (!(pci_resource_flags(pdev, first_bar + slot) & IORESOURCE_MEM)) {
- printk(KERN_ERR DRIVER_NAME ": BAR is not iomem. Aborting.\n");
- return -ENODEV;
- }
-
- if (pci_resource_len(pdev, first_bar + slot) != 0x100) {
- printk(KERN_ERR DRIVER_NAME ": Invalid iomem size. "
- "You may experience problems.\n");
- }
-
- if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
- printk(KERN_ERR DRIVER_NAME ": Vendor specific interface. Aborting.\n");
- return -ENODEV;
- }
-
- if ((pdev->class & 0x0000FF) > PCI_SDHCI_IFVENDOR) {
- printk(KERN_ERR DRIVER_NAME ": Unknown interface. Aborting.\n");
- return -ENODEV;
- }
-
- mmc = mmc_alloc_host(sizeof(struct sdhci_host), &pdev->dev);
+ mmc = mmc_alloc_host(sizeof(struct sdhci_host) + priv_size, dev);
if (!mmc)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
host = mmc_priv(mmc);
host->mmc = mmc;
- host->chip = chip;
- chip->hosts[slot] = host;
-
- host->bar = first_bar + slot;
+ return host;
+}
- host->addr = pci_resource_start(pdev, host->bar);
- host->irq = pdev->irq;
+EXPORT_SYMBOL_GPL(sdhci_alloc_host);
- DBG("slot %d at 0x%08lx, irq %d\n", slot, host->addr, host->irq);
+int sdhci_add_host(struct sdhci_host *host)
+{
+ struct mmc_host *mmc;
+ unsigned int caps;
+ int ret;
- snprintf(host->slot_descr, 20, "sdhci:slot%d", slot);
+ WARN_ON(host == NULL);
+ if (host == NULL)
+ return -EINVAL;
- ret = pci_request_region(pdev, host->bar, host->slot_descr);
- if (ret)
- goto free;
+ mmc = host->mmc;
- host->ioaddr = ioremap_nocache(host->addr,
- pci_resource_len(pdev, host->bar));
- if (!host->ioaddr) {
- ret = -ENOMEM;
- goto release;
- }
+ if (debug_quirks)
+ host->quirks = debug_quirks;
sdhci_reset(host, SDHCI_RESET_ALL);
- version = readw(host->ioaddr + SDHCI_HOST_VERSION);
- version = (version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
- if (version != 0) {
+ host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
+ host->version = (host->version & SDHCI_SPEC_VER_MASK)
+ >> SDHCI_SPEC_VER_SHIFT;
+ if (host->version > SDHCI_SPEC_200) {
printk(KERN_ERR "%s: Unknown controller version (%d). "
- "You may experience problems.\n", host->slot_descr,
- version);
+ "You may experience problems.\n", mmc_hostname(mmc),
+ host->version);
}
- caps = readl(host->ioaddr + SDHCI_CAPABILITIES);
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
- if (chip->quirks & SDHCI_QUIRK_FORCE_DMA)
- host->flags |= SDHCI_USE_DMA;
- else if (!(caps & SDHCI_CAN_DO_DMA))
- DBG("Controller doesn't have DMA capability\n");
+ if (host->quirks & SDHCI_QUIRK_FORCE_DMA)
+ host->flags |= SDHCI_USE_SDMA;
+ else if (!(caps & SDHCI_CAN_DO_SDMA))
+ DBG("Controller doesn't have SDMA capability\n");
else
- host->flags |= SDHCI_USE_DMA;
+ host->flags |= SDHCI_USE_SDMA;
- if ((chip->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
- (host->flags & SDHCI_USE_DMA)) {
- DBG("Disabling DMA as it is marked broken");
- host->flags &= ~SDHCI_USE_DMA;
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_DMA) &&
+ (host->flags & SDHCI_USE_SDMA)) {
+ DBG("Disabling DMA as it is marked broken\n");
+ host->flags &= ~SDHCI_USE_SDMA;
}
- if (((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
- (host->flags & SDHCI_USE_DMA)) {
- printk(KERN_WARNING "%s: Will use DMA "
- "mode even though HW doesn't fully "
- "claim to support it.\n", host->slot_descr);
+ if ((host->version >= SDHCI_SPEC_200) && (caps & SDHCI_CAN_DO_ADMA2))
+ host->flags |= SDHCI_USE_ADMA;
+
+ if ((host->quirks & SDHCI_QUIRK_BROKEN_ADMA) &&
+ (host->flags & SDHCI_USE_ADMA)) {
+ DBG("Disabling ADMA as it is marked broken\n");
+ host->flags &= ~SDHCI_USE_ADMA;
}
- if (host->flags & SDHCI_USE_DMA) {
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING "%s: No suitable DMA available. "
- "Falling back to PIO.\n", host->slot_descr);
- host->flags &= ~SDHCI_USE_DMA;
+ if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+ if (host->ops->enable_dma) {
+ if (host->ops->enable_dma(host)) {
+ printk(KERN_WARNING "%s: No suitable DMA "
+ "available. Falling back to PIO.\n",
+ mmc_hostname(mmc));
+ host->flags &=
+ ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
+ }
}
}
- if (host->flags & SDHCI_USE_DMA)
- pci_set_master(pdev);
- else /* XXX: Hack to get MMC layer to avoid highmem */
- pdev->dma_mask = 0;
+ if (host->flags & SDHCI_USE_ADMA) {
+ /*
+ * We need to allocate descriptors for all sg entries
+ * (128) and potentially one alignment transfer for
+ * each of those entries.
+ */
+ host->adma_desc = kmalloc((128 * 2 + 1) * 4, GFP_KERNEL);
+ host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
+ if (!host->adma_desc || !host->align_buffer) {
+ kfree(host->adma_desc);
+ kfree(host->align_buffer);
+ printk(KERN_WARNING "%s: Unable to allocate ADMA "
+ "buffers. Falling back to standard DMA.\n",
+ mmc_hostname(mmc));
+ host->flags &= ~SDHCI_USE_ADMA;
+ }
+ }
+
+ /*
+ * If we use DMA, then it's up to the caller to set the DMA
+ * mask, but PIO does not need the hw shim so we set a new
+ * mask here in that case.
+ */
+ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) {
+ host->dma_mask = DMA_BIT_MASK(64);
+ mmc_dev(host->mmc)->dma_mask = &host->dma_mask;
+ }
host->max_clk =
(caps & SDHCI_CLOCK_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT;
+ host->max_clk *= 1000000;
if (host->max_clk == 0) {
- printk(KERN_ERR "%s: Hardware doesn't specify base clock "
- "frequency.\n", host->slot_descr);
- ret = -ENODEV;
- goto unmap;
+ if (!host->ops->get_max_clock) {
+ printk(KERN_ERR
+ "%s: Hardware doesn't specify base clock "
+ "frequency.\n", mmc_hostname(mmc));
+ return -ENODEV;
+ }
+ host->max_clk = host->ops->get_max_clock(host);
}
- host->max_clk *= 1000000;
host->timeout_clk =
(caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
if (host->timeout_clk == 0) {
- printk(KERN_ERR "%s: Hardware doesn't specify timeout clock "
- "frequency.\n", host->slot_descr);
- ret = -ENODEV;
- goto unmap;
+ if (host->ops->get_timeout_clock) {
+ host->timeout_clk = host->ops->get_timeout_clock(host);
+ } else if (!(host->quirks &
+ SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
+ printk(KERN_ERR
+ "%s: Hardware doesn't specify timeout clock "
+ "frequency.\n", mmc_hostname(mmc));
+ return -ENODEV;
+ }
}
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
* Set host parameters.
*/
mmc->ops = &sdhci_ops;
- mmc->f_min = host->max_clk / 256;
+ if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK &&
+ host->ops->set_clock && host->ops->get_min_clock)
+ mmc->f_min = host->ops->get_min_clock(host);
+ else
+ mmc->f_min = host->max_clk / 256;
mmc->f_max = host->max_clk;
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE | MMC_CAP_SDIO_IRQ;
+ mmc->caps = MMC_CAP_SDIO_IRQ;
+
+ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
if (caps & SDHCI_CAN_DO_HISPD)
mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+ if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+
mmc->ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
if (mmc->ocr_avail == 0) {
printk(KERN_ERR "%s: Hardware doesn't report any "
- "support voltages.\n", host->slot_descr);
- ret = -ENODEV;
- goto unmap;
+ "support voltages.\n", mmc_hostname(mmc));
+ return -ENODEV;
}
spin_lock_init(&host->lock);
/*
- * Maximum number of segments. Hardware cannot do scatter lists.
+ * Maximum number of segments. Depends on if the hardware
+ * can do scatter/gather or not.
*/
- if (host->flags & SDHCI_USE_DMA)
+ if (host->flags & SDHCI_USE_ADMA)
+ mmc->max_hw_segs = 128;
+ else if (host->flags & SDHCI_USE_SDMA)
mmc->max_hw_segs = 1;
- else
- mmc->max_hw_segs = 16;
- mmc->max_phys_segs = 16;
+ else /* PIO */
+ mmc->max_hw_segs = 128;
+ mmc->max_phys_segs = 128;
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
/*
* Maximum segment size. Could be one segment with the maximum number
- * of bytes.
+ * of bytes. When doing hardware scatter/gather, each entry cannot
+ * be larger than 64 KiB though.
*/
- mmc->max_seg_size = mmc->max_req_size;
+ if (host->flags & SDHCI_USE_ADMA)
+ mmc->max_seg_size = 65536;
+ else
+ mmc->max_seg_size = mmc->max_req_size;
/*
* Maximum block size. This varies from controller to controller and
* is specified in the capabilities register.
*/
- mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
- if (mmc->max_blk_size >= 3) {
- printk(KERN_WARNING "%s: Invalid maximum block size, assuming 512\n",
- host->slot_descr);
- mmc->max_blk_size = 512;
- } else
- mmc->max_blk_size = 512 << mmc->max_blk_size;
+ if (host->quirks & SDHCI_QUIRK_FORCE_BLK_SZ_2048) {
+ mmc->max_blk_size = 2;
+ } else {
+ mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >>
+ SDHCI_MAX_BLOCK_SHIFT;
+ if (mmc->max_blk_size >= 3) {
+ printk(KERN_WARNING "%s: Invalid maximum block size, "
+ "assuming 512 bytes\n", mmc_hostname(mmc));
+ mmc->max_blk_size = 0;
+ }
+ }
+
+ mmc->max_blk_size = 512 << mmc->max_blk_size;
/*
* Maximum block count.
*/
- mmc->max_blk_count = 65535;
+ mmc->max_blk_count = (host->quirks & SDHCI_QUIRK_NO_MULTIBLOCK) ? 1 : 65535;
/*
* Init tasklets.
setup_timer(&host->timer, sdhci_timeout_timer, (unsigned long)host);
ret = request_irq(host->irq, sdhci_irq, IRQF_SHARED,
- host->slot_descr, host);
+ mmc_hostname(mmc), host);
if (ret)
goto untasklet;
sdhci_dumpregs(host);
#endif
+#ifdef SDHCI_USE_LEDS_CLASS
+ snprintf(host->led_name, sizeof(host->led_name),
+ "%s::", mmc_hostname(mmc));
+ host->led.name = host->led_name;
+ host->led.brightness = LED_OFF;
+ host->led.default_trigger = mmc_hostname(mmc);
+ host->led.brightness_set = sdhci_led_control;
+
+ ret = led_classdev_register(mmc_dev(mmc), &host->led);
+ if (ret)
+ goto reset;
+#endif
+
mmiowb();
mmc_add_host(mmc);
- printk(KERN_INFO "%s: SDHCI at 0x%08lx irq %d %s\n", mmc_hostname(mmc),
- host->addr, host->irq,
- (host->flags & SDHCI_USE_DMA)?"DMA":"PIO");
+ printk(KERN_INFO "%s: SDHCI controller on %s [%s] using %s\n",
+ mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
+ (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
+
+ sdhci_enable_card_detection(host);
return 0;
+#ifdef SDHCI_USE_LEDS_CLASS
+reset:
+ sdhci_reset(host, SDHCI_RESET_ALL);
+ free_irq(host->irq, host);
+#endif
untasklet:
tasklet_kill(&host->card_tasklet);
tasklet_kill(&host->finish_tasklet);
-unmap:
- iounmap(host->ioaddr);
-release:
- pci_release_region(pdev, host->bar);
-free:
- mmc_free_host(mmc);
return ret;
}
-static void sdhci_remove_slot(struct pci_dev *pdev, int slot)
-{
- struct sdhci_chip *chip;
- struct mmc_host *mmc;
- struct sdhci_host *host;
-
- chip = pci_get_drvdata(pdev);
- host = chip->hosts[slot];
- mmc = host->mmc;
-
- chip->hosts[slot] = NULL;
-
- mmc_remove_host(mmc);
-
- sdhci_reset(host, SDHCI_RESET_ALL);
-
- free_irq(host->irq, host);
-
- del_timer_sync(&host->timer);
-
- tasklet_kill(&host->card_tasklet);
- tasklet_kill(&host->finish_tasklet);
-
- iounmap(host->ioaddr);
-
- pci_release_region(pdev, host->bar);
-
- mmc_free_host(mmc);
-}
+EXPORT_SYMBOL_GPL(sdhci_add_host);
-static int __devinit sdhci_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
+void sdhci_remove_host(struct sdhci_host *host, int dead)
{
- int ret, i;
- u8 slots, rev;
- struct sdhci_chip *chip;
-
- BUG_ON(pdev == NULL);
- BUG_ON(ent == NULL);
+ unsigned long flags;
- pci_read_config_byte(pdev, PCI_CLASS_REVISION, &rev);
+ if (dead) {
+ spin_lock_irqsave(&host->lock, flags);
- printk(KERN_INFO DRIVER_NAME
- ": SDHCI controller found at %s [%04x:%04x] (rev %x)\n",
- pci_name(pdev), (int)pdev->vendor, (int)pdev->device,
- (int)rev);
-
- ret = pci_read_config_byte(pdev, PCI_SLOT_INFO, &slots);
- if (ret)
- return ret;
+ host->flags |= SDHCI_DEVICE_DEAD;
- slots = PCI_SLOT_INFO_SLOTS(slots) + 1;
- DBG("found %d slot(s)\n", slots);
- if (slots == 0)
- return -ENODEV;
+ if (host->mrq) {
+ printk(KERN_ERR "%s: Controller removed during "
+ " transfer!\n", mmc_hostname(host->mmc));
- ret = pci_enable_device(pdev);
- if (ret)
- return ret;
+ host->mrq->cmd->error = -ENOMEDIUM;
+ tasklet_schedule(&host->finish_tasklet);
+ }
- chip = kzalloc(sizeof(struct sdhci_chip) +
- sizeof(struct sdhci_host*) * slots, GFP_KERNEL);
- if (!chip) {
- ret = -ENOMEM;
- goto err;
+ spin_unlock_irqrestore(&host->lock, flags);
}
- chip->pdev = pdev;
- chip->quirks = ent->driver_data;
+ sdhci_disable_card_detection(host);
- if (debug_quirks)
- chip->quirks = debug_quirks;
-
- chip->num_slots = slots;
- pci_set_drvdata(pdev, chip);
+ mmc_remove_host(host->mmc);
- for (i = 0;i < slots;i++) {
- ret = sdhci_probe_slot(pdev, i);
- if (ret) {
- for (i--;i >= 0;i--)
- sdhci_remove_slot(pdev, i);
- goto free;
- }
- }
-
- return 0;
+#ifdef SDHCI_USE_LEDS_CLASS
+ led_classdev_unregister(&host->led);
+#endif
-free:
- pci_set_drvdata(pdev, NULL);
- kfree(chip);
+ if (!dead)
+ sdhci_reset(host, SDHCI_RESET_ALL);
-err:
- pci_disable_device(pdev);
- return ret;
-}
+ free_irq(host->irq, host);
-static void __devexit sdhci_remove(struct pci_dev *pdev)
-{
- int i;
- struct sdhci_chip *chip;
+ del_timer_sync(&host->timer);
- chip = pci_get_drvdata(pdev);
+ tasklet_kill(&host->card_tasklet);
+ tasklet_kill(&host->finish_tasklet);
- if (chip) {
- for (i = 0;i < chip->num_slots;i++)
- sdhci_remove_slot(pdev, i);
+ kfree(host->adma_desc);
+ kfree(host->align_buffer);
- pci_set_drvdata(pdev, NULL);
+ host->adma_desc = NULL;
+ host->align_buffer = NULL;
+}
- kfree(chip);
- }
+EXPORT_SYMBOL_GPL(sdhci_remove_host);
- pci_disable_device(pdev);
+void sdhci_free_host(struct sdhci_host *host)
+{
+ mmc_free_host(host->mmc);
}
-static struct pci_driver sdhci_driver = {
- .name = DRIVER_NAME,
- .id_table = pci_ids,
- .probe = sdhci_probe,
- .remove = __devexit_p(sdhci_remove),
- .suspend = sdhci_suspend,
- .resume = sdhci_resume,
-};
+EXPORT_SYMBOL_GPL(sdhci_free_host);
/*****************************************************************************\
* *
": Secure Digital Host Controller Interface driver\n");
printk(KERN_INFO DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
- return pci_register_driver(&sdhci_driver);
+ return 0;
}
static void __exit sdhci_drv_exit(void)
{
- DBG("Exiting\n");
-
- pci_unregister_driver(&sdhci_driver);
}
module_init(sdhci_drv_init);
module_param(debug_quirks, uint, 0444);
-MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>");
-MODULE_DESCRIPTION("Secure Digital Host Controller Interface driver");
+MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>");
+MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver");
MODULE_LICENSE("GPL");
MODULE_PARM_DESC(debug_quirks, "Force certain quirks.");
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff