if (ret)
goto err;
- /*
- * FIXME: This should timeout based on information in the CIS,
- * but we don't have card to parse that yet.
- */
- timeout = jiffies + HZ;
+ timeout = jiffies + msecs_to_jiffies(func->enable_timeout);
while (1) {
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IORx, 0, ®);
return -EINVAL;
if (blksz == 0) {
- blksz = min(min(
- func->max_blksize,
- func->card->host->max_blk_size),
- 512u);
+ blksz = min(func->max_blksize, func->card->host->max_blk_size);
+ blksz = min(blksz, 512u);
}
ret = mmc_io_rw_direct(func->card, 1, 0,
func->cur_blksize = blksz;
return 0;
}
-
EXPORT_SYMBOL_GPL(sdio_set_block_size);
+/*
+ * Calculate the maximum byte mode transfer size
+ */
+static inline unsigned int sdio_max_byte_size(struct sdio_func *func)
+{
+ unsigned mval = min(func->card->host->max_seg_size,
+ func->card->host->max_blk_size);
+
+ if (mmc_blksz_for_byte_mode(func->card))
+ mval = min(mval, func->cur_blksize);
+ else
+ mval = min(mval, func->max_blksize);
+
+ return min(mval, 512u); /* maximum size for byte mode */
+}
+
/**
* sdio_align_size - pads a transfer size to a more optimal value
* @func: SDIO function
* If we can still do this with just a byte transfer, then
* we're done.
*/
- if ((sz <= func->cur_blksize) && (sz <= 512))
+ if (sz <= sdio_max_byte_size(func))
return sz;
if (func->card->cccr.multi_block) {
*/
byte_sz = mmc_align_data_size(func->card,
sz % func->cur_blksize);
- if ((byte_sz <= func->cur_blksize) && (byte_sz <= 512)) {
+ if (byte_sz <= sdio_max_byte_size(func)) {
blk_sz = sz / func->cur_blksize;
return blk_sz * func->cur_blksize + byte_sz;
}
* controller can handle the chunk size;
*/
chunk_sz = mmc_align_data_size(func->card,
- min(func->cur_blksize, 512u));
- if (chunk_sz == min(func->cur_blksize, 512u)) {
+ sdio_max_byte_size(func));
+ if (chunk_sz == sdio_max_byte_size(func)) {
/*
* Fix up the size of the remainder (if any)
*/
int ret;
/* Do the bulk of the transfer using block mode (if supported). */
- if (func->card->cccr.multi_block) {
+ if (func->card->cccr.multi_block && (size > sdio_max_byte_size(func))) {
/* Blocks per command is limited by host count, host transfer
* size (we only use a single sg entry) and the maximum for
* IO_RW_EXTENDED of 511 blocks. */
- max_blocks = min(min(
- func->card->host->max_blk_count,
- func->card->host->max_seg_size / func->cur_blksize),
- 511u);
+ max_blocks = min(func->card->host->max_blk_count,
+ func->card->host->max_seg_size / func->cur_blksize);
+ max_blocks = min(max_blocks, 511u);
while (remainder > func->cur_blksize) {
unsigned blocks;
/* Write the remainder using byte mode. */
while (remainder > 0) {
- size = remainder;
- if (size > func->cur_blksize)
- size = func->cur_blksize;
- if (size > 512)
- size = 512; /* maximum size for byte mode */
+ size = min(remainder, sdio_max_byte_size(func));
ret = mmc_io_rw_extended(func->card, write, func->num, addr,
incr_addr, buf, 1, size);
* function. If there is a problem reading the address, 0xff
* is returned and @err_ret will contain the error code.
*/
-unsigned char sdio_readb(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u8 sdio_readb(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
- unsigned char val;
+ u8 val;
BUG_ON(!func);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writeb(struct sdio_func *func, unsigned char b, unsigned int addr,
- int *err_ret)
+void sdio_writeb(struct sdio_func *func, u8 b, unsigned int addr, int *err_ret)
{
int ret;
EXPORT_SYMBOL_GPL(sdio_writeb);
/**
+ * sdio_writeb_readb - write and read a byte from SDIO function
+ * @func: SDIO function to access
+ * @write_byte: byte to write
+ * @addr: address to write to
+ * @err_ret: optional status value from transfer
+ *
+ * Performs a RAW (Read after Write) operation as defined by SDIO spec -
+ * single byte is written to address space of a given SDIO function and
+ * response is read back from the same address, both using single request.
+ * If there is a problem with the operation, 0xff is returned and
+ * @err_ret will contain the error code.
+ */
+u8 sdio_writeb_readb(struct sdio_func *func, u8 write_byte,
+ unsigned int addr, int *err_ret)
+{
+ int ret;
+ u8 val;
+
+ ret = mmc_io_rw_direct(func->card, 1, func->num, addr,
+ write_byte, &val);
+ if (err_ret)
+ *err_ret = ret;
+ if (ret)
+ val = 0xff;
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(sdio_writeb_readb);
+
+/**
* sdio_memcpy_fromio - read a chunk of memory from a SDIO function
* @func: SDIO function to access
* @dst: buffer to store the data
{
return sdio_io_rw_ext_helper(func, 0, addr, 0, dst, count);
}
-
EXPORT_SYMBOL_GPL(sdio_readsb);
/**
* function. If there is a problem reading the address, 0xffff
* is returned and @err_ret will contain the error code.
*/
-unsigned short sdio_readw(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u16 sdio_readw(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
return 0xFFFF;
}
- return le16_to_cpu(*(u16*)func->tmpbuf);
+ return le16_to_cpup((__le16 *)func->tmpbuf);
}
EXPORT_SYMBOL_GPL(sdio_readw);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writew(struct sdio_func *func, unsigned short b, unsigned int addr,
- int *err_ret)
+void sdio_writew(struct sdio_func *func, u16 b, unsigned int addr, int *err_ret)
{
int ret;
- *(u16*)func->tmpbuf = cpu_to_le16(b);
+ *(__le16 *)func->tmpbuf = cpu_to_le16(b);
ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 2);
if (err_ret)
* 0xffffffff is returned and @err_ret will contain the error
* code.
*/
-unsigned long sdio_readl(struct sdio_func *func, unsigned int addr,
- int *err_ret)
+u32 sdio_readl(struct sdio_func *func, unsigned int addr, int *err_ret)
{
int ret;
return 0xFFFFFFFF;
}
- return le32_to_cpu(*(u32*)func->tmpbuf);
+ return le32_to_cpup((__le32 *)func->tmpbuf);
}
EXPORT_SYMBOL_GPL(sdio_readl);
* function. @err_ret will contain the status of the actual
* transfer.
*/
-void sdio_writel(struct sdio_func *func, unsigned long b, unsigned int addr,
- int *err_ret)
+void sdio_writel(struct sdio_func *func, u32 b, unsigned int addr, int *err_ret)
{
int ret;
- *(u32*)func->tmpbuf = cpu_to_le32(b);
+ *(__le32 *)func->tmpbuf = cpu_to_le32(b);
ret = sdio_memcpy_toio(func, addr, func->tmpbuf, 4);
if (err_ret)
BUG_ON(!func);
- if (addr < 0xF0 || addr > 0xFF) {
+ if ((addr < 0xF0 || addr > 0xFF) && (!mmc_card_lenient_fn0(func->card))) {
if (err_ret)
*err_ret = -EINVAL;
return;
*err_ret = ret;
}
EXPORT_SYMBOL_GPL(sdio_f0_writeb);
+
+/**
+ * sdio_get_host_pm_caps - get host power management capabilities
+ * @func: SDIO function attached to host
+ *
+ * Returns a capability bitmask corresponding to power management
+ * features supported by the host controller that the card function
+ * might rely upon during a system suspend. The host doesn't need
+ * to be claimed, nor the function active, for this information to be
+ * obtained.
+ */
+mmc_pm_flag_t sdio_get_host_pm_caps(struct sdio_func *func)
+{
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ return func->card->host->pm_caps;
+}
+EXPORT_SYMBOL_GPL(sdio_get_host_pm_caps);
+
+/**
+ * sdio_set_host_pm_flags - set wanted host power management capabilities
+ * @func: SDIO function attached to host
+ *
+ * Set a capability bitmask corresponding to wanted host controller
+ * power management features for the upcoming suspend state.
+ * This must be called, if needed, each time the suspend method of
+ * the function driver is called, and must contain only bits that
+ * were returned by sdio_get_host_pm_caps().
+ * The host doesn't need to be claimed, nor the function active,
+ * for this information to be set.
+ */
+int sdio_set_host_pm_flags(struct sdio_func *func, mmc_pm_flag_t flags)
+{
+ struct mmc_host *host;
+
+ BUG_ON(!func);
+ BUG_ON(!func->card);
+
+ host = func->card->host;
+
+ if (flags & ~host->pm_caps)
+ return -EINVAL;
+
+ /* function suspend methods are serialized, hence no lock needed */
+ host->pm_flags |= flags;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdio_set_host_pm_flags);