if MISC_DEVICES
config AD525X_DPOT
- tristate "Analog Devices AD525x Digital Potentiometers"
- depends on I2C && SYSFS
+ tristate "Analog Devices Digital Potentiometers"
+ depends on (I2C || SPI) && SYSFS
help
If you say yes here, you get support for the Analog Devices
- AD5258, AD5259, AD5251, AD5252, AD5253, AD5254 and AD5255
+ AD5258, AD5259, AD5251, AD5252, AD5253, AD5254, AD5255
+ AD5160, AD5161, AD5162, AD5165, AD5200, AD5201, AD5203,
+ AD5204, AD5206, AD5207, AD5231, AD5232, AD5233, AD5235,
+ AD5260, AD5262, AD5263, AD5290, AD5291, AD5292, AD5293,
+ AD7376, AD8400, AD8402, AD8403, ADN2850, AD5241, AD5242,
+ AD5243, AD5245, AD5246, AD5247, AD5248, AD5280, AD5282,
+ ADN2860, AD5273, AD5171, AD5170, AD5172, AD5173
digital potentiometer chips.
See Documentation/misc-devices/ad525x_dpot.txt for the
This driver can also be built as a module. If so, the module
will be called ad525x_dpot.
+config AD525X_DPOT_I2C
+ tristate "support I2C bus connection"
+ depends on AD525X_DPOT && I2C
+ help
+ Say Y here if you have a digital potentiometers hooked to an I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-i2c.
+
+config AD525X_DPOT_SPI
+ tristate "support SPI bus connection"
+ depends on AD525X_DPOT && SPI_MASTER
+ help
+ Say Y here if you have a digital potentiometers hooked to an SPI bus.
+
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad525x_dpot-spi.
+
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
this feature will allow for direct communication between SSIs
based on a network adapter and DMA messaging.
+config CS5535_MFGPT
+ tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
+ depends on PCI
+ depends on X86
+ default n
+ help
+ This driver provides access to MFGPT functionality for other
+ drivers that need timers. MFGPTs are available in the CS5535 and
+ CS5536 companion chips that are found in AMD Geode and several
+ other platforms. They have a better resolution and max interval
+ than the generic PIT, and are suitable for use as high-res timers.
+ You probably don't want to enable this manually; other drivers that
+ make use of it should enable it.
+
+config CS5535_MFGPT_DEFAULT_IRQ
+ int
+ depends on CS5535_MFGPT
+ default 7
+ help
+ MFGPTs on the CS5535 require an interrupt. The selected IRQ
+ can be overridden as a module option as well as by driver that
+ use the cs5535_mfgpt_ API; however, different architectures might
+ want to use a different IRQ by default. This is here for
+ architectures to set as necessary.
+
+config CS5535_CLOCK_EVENT_SRC
+ tristate "CS5535/CS5536 high-res timer (MFGPT) events"
+ depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT
+ help
+ This driver provides a clock event source based on the MFGPT
+ timer(s) in the CS5535 and CS5536 companion chips.
+ MFGPTs have a better resolution and max interval than the
+ generic PIT, and are suitable for use as high-res timers.
+
config HP_ILO
tristate "Channel interface driver for HP iLO/iLO2 processor"
depends on PCI
This option enables addition debugging code for the SGI GRU driver. If
you are unsure, say N.
-config DELL_LAPTOP
- tristate "Dell Laptop Extras (EXPERIMENTAL)"
- depends on X86
- depends on DCDBAS
- depends on EXPERIMENTAL
- depends on BACKLIGHT_CLASS_DEVICE
- depends on RFKILL
- depends on POWER_SUPPLY
- default n
- ---help---
- This driver adds support for rfkill and backlight control to Dell
- laptops.
-
config ISL29003
tristate "Intersil ISL29003 ambient light sensor"
depends on I2C && SYSFS
This driver can also be built as a module. If so, the module
will be called isl29003.
+config SENSORS_TSL2550
+ tristate "Taos TSL2550 ambient light sensor"
+ depends on I2C && SYSFS
+ help
+ If you say yes here you get support for the Taos TSL2550
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called tsl2550.
+
config EP93XX_PWM
tristate "EP93xx PWM support"
depends on ARCH_EP93XX
This driver can also be built as a module. If so, the module
will be called ds1682.
+config TI_DAC7512
+ tristate "Texas Instruments DAC7512"
+ depends on SPI && SYSFS
+ help
+ If you say yes here you get support for the Texas Instruments
+ DAC7512 16-bit digital-to-analog converter.
+
+ This driver can also be built as a module. If so, the module
+ will be calles ti_dac7512.
+
+config VMWARE_BALLOON
+ tristate "VMware Balloon Driver"
+ depends on X86
+ help
+ This is VMware physical memory management driver which acts
+ like a "balloon" that can be inflated to reclaim physical pages
+ by reserving them in the guest and invalidating them in the
+ monitor, freeing up the underlying machine pages so they can
+ be allocated to other guests. The balloon can also be deflated
+ to allow the guest to use more physical memory.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vmware_balloon.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff