#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kdev_t.h>
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
(IOCPage4Ptr->Header.PageLength + ii) * 4;
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+ ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
}
-static int
+int
mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
{
+ MPT_ADAPTER *ioc = hd->ioc;
MpiRaidActionRequest_t *pReq;
MPT_FRAME_HDR *mf;
- MPT_ADAPTER *ioc = hd->ioc;
+ int ret;
+ unsigned long timeleft;
+
+ mutex_lock(&ioc->internal_cmds.mutex);
/* Get and Populate a free Frame
*/
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
- ddvprintk(ioc, printk(MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
+ dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
+ "%s: no msg frames!\n", ioc->name, __func__));
+ ret = -EAGAIN;
+ goto out;
}
pReq = (MpiRaidActionRequest_t *)mf;
if (quiesce)
pReq->Reserved2 = 0;
pReq->ActionDataWord = 0; /* Reserved for this action */
- mpt_add_sge((char *)&pReq->ActionDataSGE,
+ ioc->add_sge((char *)&pReq->ActionDataSGE,
MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
ioc->name, pReq->Action, channel, id));
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
+ INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+ timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
+ ioc->name, __func__));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
+ }
- if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
- return -1;
+ ret = ioc->internal_cmds.completion_code;
- return 0;
+ out:
+ CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+ mutex_unlock(&ioc->internal_cmds.mutex);
+ return ret;
}
static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
static int
mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
- struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
int rc;
rc = mptscsih_ioc_reset(ioc, reset_phase);
- if (reset_phase == MPT_IOC_POST_RESET)
+ /* only try to do a renegotiation if we're properly set up
+ * if we get an ioc fault on bringup, ioc->sh will be NULL */
+ if (reset_phase == MPT_IOC_POST_RESET &&
+ ioc->sh) {
+ struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
+
mptspi_dv_renegotiate(hd);
+ }
return rc;
}
* A slightly different algorithm is required for
* 64bit SGEs.
*/
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ scale = ioc->req_sz/ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64)) {
numSGE = (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 60) / ioc->SGE_size;
} else {
numSGE = 1 + (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 64) / ioc->SGE_size;
}
if (numSGE < sh->sg_tablesize) {
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
ioc->name, ioc->ScsiLookup));
- /* Clear the TM flags
- */
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->resetPending = 0;
- hd->abortSCpnt = NULL;
-
- /* Clear the pointer used to store
- * single-threaded commands, i.e., those
- * issued during a bus scan, dv and
- * configuration pages.
- */
- hd->cmdPtr = NULL;
-
- /* Initialize this SCSI Hosts' timers
- * To use, set the timer expires field
- * and add_timer
- */
- init_timer(&hd->timer);
- hd->timer.data = (unsigned long) hd;
- hd->timer.function = mptscsih_timer_expired;
-
ioc->spi_data.Saf_Te = mpt_saf_te;
-
- hd->negoNvram = MPT_SCSICFG_USE_NVRAM;
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"saf_te %x\n",
ioc->name,
mpt_saf_te));
ioc->spi_data.noQas = 0;
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
hd->spi_pending = 0;
* issue internal bus reset
*/
if (ioc->spi_data.bus_reset)
- mptscsih_TMHandler(hd,
+ mptscsih_IssueTaskMgmt(hd,
MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
0, 0, 0, 0, 5);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff