#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/suspend.h>
#include "saa7134.h"
#include <media/v4l2-common.h>
#include "dvb-pll.h"
-
-#ifdef HAVE_MT352
-# include "mt352.h"
-# include "mt352_priv.h" /* FIXME */
-#endif
-#ifdef HAVE_TDA1004X
-# include "tda1004x.h"
-#endif
-#ifdef HAVE_NXT200X
-# include "nxt200x.h"
-#endif
+#include <dvb_frontend.h>
+
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
+#include "tda1004x.h"
+#include "nxt200x.h"
+#include "tuner-xc2028.h"
+#include "xc5000.h"
+
+#include "tda10086.h"
+#include "tda826x.h"
+#include "tda827x.h"
+#include "isl6421.h"
+#include "isl6405.h"
+#include "lnbp21.h"
+#include "tuner-simple.h"
+#include "tda10048.h"
+#include "tda18271.h"
+#include "lgdt3305.h"
+#include "tda8290.h"
+
+#include "zl10353.h"
+
+#include "zl10036.h"
+#include "zl10039.h"
+#include "mt312.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
-static unsigned int antenna_pwr = 0;
+static unsigned int antenna_pwr;
module_param(antenna_pwr, int, 0444);
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
-/* ------------------------------------------------------------------ */
+static int use_frontend;
+module_param(use_frontend, int, 0644);
+MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define dprintk(fmt, arg...) do { if (debug) \
+ printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
+
+/* Print a warning */
+#define wprintk(fmt, arg...) \
+ printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
+
+/* ------------------------------------------------------------------
+ * mt352 based DVB-T cards
+ */
-#ifdef HAVE_MT352
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
{
u32 ok;
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
- printk("%s: %s %s\n", dev->name, __FUNCTION__,
- ok ? "on" : "off");
+ dprintk("%s %s\n", __func__, ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
- printk("%s: %s called\n",dev->name,__FUNCTION__);
+ dprintk("%s called\n", __func__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
return 0;
}
+static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
+{
+ static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
+ static u8 reset [] = { RESET, 0x80 };
+ static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
+ static u8 agc_cfg [] = { AGC_TARGET, 0xe };
+ static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
+
+ mt352_write(fe, clock_config, sizeof(clock_config));
+ udelay(200);
+ mt352_write(fe, reset, sizeof(reset));
+ mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
+ mt352_write(fe, agc_cfg, sizeof(agc_cfg));
+ mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+ return 0;
+}
+
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
struct dvb_frontend_parameters* params)
{
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
- saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+ saa_call_all(dev, tuner, s_frequency, &f);
msg.buf = on;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
return mt352_pinnacle_init(fe);
}
-static int mt352_aver777_tuner_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
-{
- if (buf_len < 5)
- return -EINVAL;
-
- pllbuf[0] = 0x61;
- dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1,
- params->frequency,
- params->u.ofdm.bandwidth);
- return 5;
-}
-
static struct mt352_config pinnacle_300i = {
.demod_address = 0x3c >> 1,
.adc_clock = 20333,
.demod_address = 0xf,
.demod_init = mt352_aver777_init,
};
-#endif
-/* ------------------------------------------------------------------ */
+static struct mt352_config avermedia_xc3028_mt352_dev = {
+ .demod_address = (0x1e >> 1),
+ .no_tuner = 1,
+ .demod_init = mt352_avermedia_xc3028_init,
+};
+
+/* ==================================================================
+ * tda1004x based DVB-T cards, helper functions
+ */
+
+static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
+ const struct firmware **fw, char *name)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ return request_firmware(fw, name, &dev->pci->dev);
+}
-#ifdef HAVE_TDA1004X
+/* ------------------------------------------------------------------
+ * these tuners are tu1216, td1316(a)
+ */
-static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
struct saa7134_dev *dev = fe->dvb->priv;
+ struct tda1004x_state *state = fe->demodulator_priv;
+ u8 addr = state->config->tuner_address;
u8 tuner_buf[4];
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
sizeof(tuner_buf) };
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
+ if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
+ wprintk("could not write to tuner at addr: 0x%02x\n",
+ addr << 1);
return -EIO;
+ }
msleep(1);
return 0;
}
-static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe)
+static int philips_tu1216_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
+ struct tda1004x_state *state = fe->demodulator_priv;
+ u8 addr = state->config->tuner_address;
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
/* ------------------------------------------------------------------ */
-static int philips_tu1216_tuner_60_init(struct dvb_frontend *fe)
-{
- return philips_tda6651_pll_init(0x60, fe);
-}
-
-static int philips_tu1216_tuner_60_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- return philips_tda6651_pll_set(0x60, fe, params);
-}
-
-static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
- const struct firmware **fw, char *name)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- return request_firmware(fw, name, &dev->pci->dev);
-}
-
static struct tda1004x_config philips_tu1216_60_config = {
-
.demod_address = 0x8,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tu1216_request_firmware,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
-
-static int philips_tu1216_tuner_61_init(struct dvb_frontend *fe)
-{
- return philips_tda6651_pll_init(0x61, fe);
-}
-
-static int philips_tu1216_tuner_61_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- return philips_tda6651_pll_set(0x61, fe, params);
-}
-
static struct tda1004x_config philips_tu1216_61_config = {
.demod_address = 0x8,
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_DEFAULT,
.if_freq = TDA10046_FREQ_3617,
- .request_firmware = philips_tu1216_request_firmware,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
};
/* ------------------------------------------------------------------ */
-static int philips_europa_tuner_init(struct dvb_frontend *fe)
+static int philips_td1316_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
+ struct tda1004x_state *state = fe->demodulator_priv;
+ u8 addr = state->config->tuner_address;
static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
- struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
+ struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
/* setup PLL configuration */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
return -EIO;
- msleep(1);
+ return 0;
+}
+
+static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ return philips_tda6651_pll_set(fe, params);
+}
+
+static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ struct tda1004x_state *state = fe->demodulator_priv;
+ u8 addr = state->config->tuner_address;
+ static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
+ struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
- /* switch the board to dvb mode */
- init_msg.addr = 0x43;
- init_msg.len = 0x02;
- msg[0] = 0x00;
- msg[1] = 0x40;
+ /* switch the tuner to analog mode */
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
+ if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
return -EIO;
-
return 0;
}
-static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+/* ------------------------------------------------------------------ */
+
+static int philips_europa_tuner_init(struct dvb_frontend *fe)
{
- return philips_tda6651_pll_set(0x61, fe, params);
+ struct saa7134_dev *dev = fe->dvb->priv;
+ static u8 msg[] = { 0x00, 0x40};
+ struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
+
+
+ if (philips_td1316_tuner_init(fe))
+ return -EIO;
+ msleep(1);
+ if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
+ return -EIO;
+
+ return 0;
}
static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
- /* this message actually turns the tuner back to analog mode */
- static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
- struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
- i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
- msleep(1);
+ static u8 msg[] = { 0x00, 0x14 };
+ struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
+
+ if (philips_td1316_tuner_sleep(fe))
+ return -EIO;
/* switch the board to analog mode */
- analog_msg.addr = 0x43;
- analog_msg.len = 0x02;
- msg[0] = 0x00;
- msg[1] = 0x14;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
.xtal_freq = TDA10046_XTAL_4M,
.agc_config = TDA10046_AGC_IFO_AUTO_POS,
.if_freq = TDA10046_FREQ_052,
- .request_firmware = NULL,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
+static struct tda1004x_config medion_cardbus = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
+ .if_freq = TDA10046_FREQ_3613,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
+/* ------------------------------------------------------------------
+ * tda 1004x based cards with philips silicon tuner
+ */
+
+static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
{
- struct saa7134_dev *dev = fe->dvb->priv;
- /* this message is to set up ATC and ALC */
- static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
- struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
+ struct tda1004x_state *state = fe->demodulator_priv;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
+ u8 addr = state->config->i2c_gate;
+ static u8 tda8290_close[] = { 0x21, 0xc0};
+ static u8 tda8290_open[] = { 0x21, 0x80};
+ struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
+ if (enable) {
+ tda8290_msg.buf = tda8290_close;
+ } else {
+ tda8290_msg.buf = tda8290_open;
+ }
+ if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
+ struct saa7134_dev *dev = fe->dvb->priv;
+ wprintk("could not access tda8290 I2C gate\n");
return -EIO;
- msleep(1);
-
+ }
+ msleep(20);
return 0;
}
-static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
+static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
- /* this message actually turns the tuner back to analog mode */
- static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
- struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
+ struct tda1004x_state *state = fe->demodulator_priv;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- msleep(1);
- fmd1216_init[2] = 0x86;
- fmd1216_init[3] = 0x54;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- msleep(1);
+ switch (state->config->antenna_switch) {
+ case 0: break;
+ case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
+ saa7134_set_gpio(dev, 21, 0);
+ break;
+ case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
+ saa7134_set_gpio(dev, 21, 1);
+ break;
+ }
return 0;
}
-static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
- u8 tuner_buf[4];
- struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len =
- sizeof(tuner_buf) };
- int tuner_frequency = 0;
- int divider = 0;
- u8 band, mode, cp;
-
- /* determine charge pump */
- tuner_frequency = params->frequency + 36130000;
- if (tuner_frequency < 87000000)
- return -EINVAL;
- /* low band */
- else if (tuner_frequency < 180000000) {
- band = 1;
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 195000000) {
- band = 1;
- mode = 6;
- cp = 1;
- /* mid band */
- } else if (tuner_frequency < 366000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 10;
- } else {
- band = 2;
- }
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 478000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 10;
- } else {
- band = 2;
- }
- mode = 6;
- cp = 1;
- /* high band */
- } else if (tuner_frequency < 662000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 7;
- cp = 0;
- } else if (tuner_frequency < 840000000) {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 6;
- cp = 1;
- } else {
- if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
- band = 12;
- } else {
- band = 4;
- }
- mode = 7;
- cp = 1;
+ struct tda1004x_state *state = fe->demodulator_priv;
+ switch (state->config->antenna_switch) {
+ case 0: break;
+ case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
+ saa7134_set_gpio(dev, 21, 1);
+ break;
+ case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
+ saa7134_set_gpio(dev, 21, 0);
+ break;
}
- /* calculate divisor */
- /* ((36166000 + Finput) / 166666) rounded! */
- divider = (tuner_frequency + 83333) / 166667;
-
- /* setup tuner buffer */
- tuner_buf[0] = (divider >> 8) & 0x7f;
- tuner_buf[1] = divider & 0xff;
- tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4;
- tuner_buf[3] = 0x40 | band;
-
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
return 0;
}
-static struct tda1004x_config medion_cardbus = {
- .demod_address = 0x08,
- .invert = 1,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
- .if_freq = TDA10046_FREQ_3613,
- .request_firmware = NULL,
-};
+static int configure_tda827x_fe(struct saa7134_dev *dev,
+ struct tda1004x_config *cdec_conf,
+ struct tda827x_config *tuner_conf)
+{
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+
+ fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (cdec_conf->i2c_gate)
+ fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
+ if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
+ cdec_conf->tuner_address,
+ &dev->i2c_adap, tuner_conf))
+ return 0;
+
+ wprintk("no tda827x tuner found at addr: %02x\n",
+ cdec_conf->tuner_address);
+ }
+ return -EINVAL;
+}
/* ------------------------------------------------------------------ */
-struct tda827x_data {
- u32 lomax;
- u8 spd;
- u8 bs;
- u8 bp;
- u8 cp;
- u8 gc3;
- u8 div1p5;
+static struct tda827x_config tda827x_cfg_0 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 0,
+ .switch_addr = 0
};
-static struct tda827x_data tda827x_dvbt[] = {
- { .lomax = 62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
- { .lomax = 66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
- { .lomax = 76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
- { .lomax = 84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
- { .lomax = 93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
- { .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
- { .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
- { .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
- { .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
- { .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
+static struct tda827x_config tda827x_cfg_1 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 1,
+ .switch_addr = 0x4b
};
-static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
-{
- return 0;
-}
-
-static int philips_tda827x_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- u8 tuner_buf[14];
+static struct tda827x_config tda827x_cfg_2 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 2,
+ .switch_addr = 0x4b
+};
- struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,
- .len = sizeof(tuner_buf) };
- int i, tuner_freq, if_freq;
- u32 N;
- switch (params->u.ofdm.bandwidth) {
- case BANDWIDTH_6_MHZ:
- if_freq = 4000000;
- break;
- case BANDWIDTH_7_MHZ:
- if_freq = 4500000;
- break;
- default: /* 8 MHz or Auto */
- if_freq = 5000000;
- break;
- }
- tuner_freq = params->frequency + if_freq;
+static struct tda827x_config tda827x_cfg_2_sw42 = {
+ .init = philips_tda827x_tuner_init,
+ .sleep = philips_tda827x_tuner_sleep,
+ .config = 2,
+ .switch_addr = 0x42
+};
- i = 0;
- while (tda827x_dvbt[i].lomax < tuner_freq) {
- if(tda827x_dvbt[i + 1].lomax == 0)
- break;
- i++;
- }
+/* ------------------------------------------------------------------ */
- N = ((tuner_freq + 125000) / 250000) << (tda827x_dvbt[i].spd + 2);
- tuner_buf[0] = 0;
- tuner_buf[1] = (N>>8) | 0x40;
- tuner_buf[2] = N & 0xff;
- tuner_buf[3] = 0;
- tuner_buf[4] = 0x52;
- tuner_buf[5] = (tda827x_dvbt[i].spd << 6) + (tda827x_dvbt[i].div1p5 << 5) +
- (tda827x_dvbt[i].bs << 3) + tda827x_dvbt[i].bp;
- tuner_buf[6] = (tda827x_dvbt[i].gc3 << 4) + 0x8f;
- tuner_buf[7] = 0xbf;
- tuner_buf[8] = 0x2a;
- tuner_buf[9] = 0x05;
- tuner_buf[10] = 0xff;
- tuner_buf[11] = 0x00;
- tuner_buf[12] = 0x00;
- tuner_buf[13] = 0x40;
-
- tuner_msg.len = 14;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
- return -EIO;
+static struct tda1004x_config tda827x_lifeview_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- msleep(500);
- /* correct CP value */
- tuner_buf[0] = 0x30;
- tuner_buf[1] = 0x50 + tda827x_dvbt[i].cp;
- tuner_msg.len = 2;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
+static struct tda1004x_config philips_tiger_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- return 0;
-}
+static struct tda1004x_config cinergy_ht_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- static u8 tda827x_sleep[] = { 0x30, 0xd0};
- struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep,
- .len = sizeof(tda827x_sleep) };
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- return 0;
-}
+static struct tda1004x_config cinergy_ht_pci_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static struct tda1004x_config tda827x_lifeview_config = {
+static struct tda1004x_config philips_tiger_s_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
+static struct tda1004x_config pinnacle_pctv_310i_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-struct tda827xa_data {
- u32 lomax;
- u8 svco;
- u8 spd;
- u8 scr;
- u8 sbs;
- u8 gc3;
+static struct tda1004x_config hauppauge_hvr_1110_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
};
-static struct tda827xa_data tda827xa_dvbt[] = {
- { .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
- { .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
- { .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 290000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
- { .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1},
- { .lomax = 550000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
- { .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
- { .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
- { .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0},
- { .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}};
-
-
-static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- u8 tuner_buf[14];
- unsigned char reg2[2];
+static struct tda1004x_config asus_p7131_dual_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 2,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = tuner_buf};
- int i, tuner_freq, if_freq;
- u32 N;
+static struct tda1004x_config lifeview_trio_config = {
+ .demod_address = 0x09,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP00_I,
+ .if_freq = TDA10046_FREQ_045,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- switch (params->u.ofdm.bandwidth) {
- case BANDWIDTH_6_MHZ:
- if_freq = 4000000;
- break;
- case BANDWIDTH_7_MHZ:
- if_freq = 4500000;
- break;
- default: /* 8 MHz or Auto */
- if_freq = 5000000;
- break;
- }
- tuner_freq = params->frequency + if_freq;
-
- i = 0;
- while (tda827xa_dvbt[i].lomax < tuner_freq) {
- if(tda827xa_dvbt[i + 1].lomax == 0)
- break;
- i++;
- }
-
- N = ((tuner_freq + 31250) / 62500) << tda827xa_dvbt[i].spd;
- tuner_buf[0] = 0; // subaddress
- tuner_buf[1] = N >> 8;
- tuner_buf[2] = N & 0xff;
- tuner_buf[3] = 0;
- tuner_buf[4] = 0x16;
- tuner_buf[5] = (tda827xa_dvbt[i].spd << 5) + (tda827xa_dvbt[i].svco << 3) +
- tda827xa_dvbt[i].sbs;
- tuner_buf[6] = 0x4b + (tda827xa_dvbt[i].gc3 << 4);
- tuner_buf[7] = 0x0c;
- tuner_buf[8] = 0x06;
- tuner_buf[9] = 0x24;
- tuner_buf[10] = 0xff;
- tuner_buf[11] = 0x60;
- tuner_buf[12] = 0x00;
- tuner_buf[13] = 0x39; // lpsel
- msg.len = 14;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
- return -EIO;
-
- msg.buf= reg2;
- msg.len = 2;
- reg2[0] = 0x60;
- reg2[1] = 0x3c;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &msg, 1);
-
- reg2[0] = 0xa0;
- reg2[1] = 0x40;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &msg, 1);
-
- msleep(2);
- /* correct CP value */
- reg2[0] = 0x30;
- reg2[1] = 0x10 + tda827xa_dvbt[i].scr;
- msg.len = 2;
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &msg, 1);
-
- msleep(550);
- reg2[0] = 0x50;
- reg2[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &msg, 1);
-
- return 0;
-
-}
-
-static int philips_tda827xa_tuner_sleep(u8 addr, struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- static u8 tda827xa_sleep[] = { 0x30, 0x90};
- struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827xa_sleep,
- .len = sizeof(tda827xa_sleep) };
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
- i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
- return 0;
-}
-
-/* ------------------------------------------------------------------ */
-
-static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- int ret;
- struct saa7134_dev *dev = fe->dvb->priv;
- static u8 tda8290_close[] = { 0x21, 0xc0};
- static u8 tda8290_open[] = { 0x21, 0x80};
- struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
-
- /* close tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_close;
- ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- if (ret != 1)
- return -EIO;
- msleep(20);
- ret = philips_tda827xa_pll_set(0x61, fe, params);
- if (ret != 0)
- return ret;
- /* open tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_open;
- i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- return ret;
-}
-
-static int philips_tiger_tuner_init(struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- static u8 data[] = { 0x3c, 0x33, 0x6a};
- struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
- if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static int philips_tiger_tuner_sleep(struct dvb_frontend *fe)
-{
- struct saa7134_dev *dev = fe->dvb->priv;
- static u8 data[] = { 0x3c, 0x33, 0x68};
- struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
-
- i2c_transfer(&dev->i2c_adap, &msg, 1);
- philips_tda827xa_tuner_sleep( 0x61, fe);
- return 0;
-}
-
-static struct tda1004x_config philips_tiger_config = {
+static struct tda1004x_config tevion_dvbt220rf_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
.if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
+static struct tda1004x_config md8800_dvbt_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x60,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static int lifeview_trio_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- int ret;
+static struct tda1004x_config asus_p7131_4871_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 2,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- ret = philips_tda827xa_pll_set(0x60, fe, params);
- return ret;
-}
+static struct tda1004x_config asus_p7131_hybrid_lna_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 2,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static int lifeview_trio_tuner_sleep(struct dvb_frontend *fe)
-{
- philips_tda827xa_tuner_sleep(0x60, fe);
- return 0;
-}
+static struct tda1004x_config kworld_dvb_t_210_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static struct tda1004x_config lifeview_trio_config = {
- .demod_address = 0x09,
+static struct tda1004x_config avermedia_super_007_config = {
+ .demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
.if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x60,
+ .antenna_switch= 1,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
+static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
+ .demod_address = 0x08,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP01_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x42,
+ .tuner_address = 0x61,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
-static int ads_duo_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- int ret;
+static struct tda1004x_config asus_tiger_3in1_config = {
+ .demod_address = 0x0b,
+ .invert = 1,
+ .invert_oclk = 0,
+ .xtal_freq = TDA10046_XTAL_16M,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP11_I,
+ .if_freq = TDA10046_FREQ_045,
+ .i2c_gate = 0x4b,
+ .tuner_address = 0x61,
+ .antenna_switch = 1,
+ .request_firmware = philips_tda1004x_request_firmware
+};
- ret = philips_tda827xa_pll_set(0x61, fe, params);
- return ret;
-}
+/* ------------------------------------------------------------------
+ * special case: this card uses saa713x GPIO22 for the mode switch
+ */
static int ads_duo_tuner_init(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
+ philips_tda827x_tuner_init(fe);
/* route TDA8275a AGC input to the channel decoder */
- saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60);
+ saa7134_set_gpio(dev, 22, 1);
return 0;
}
{
struct saa7134_dev *dev = fe->dvb->priv;
/* route TDA8275a AGC input to the analog IF chip*/
- saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20);
- philips_tda827xa_tuner_sleep( 0x61, fe);
+ saa7134_set_gpio(dev, 22, 0);
+ philips_tda827x_tuner_sleep(fe);
return 0;
}
+static struct tda827x_config ads_duo_cfg = {
+ .init = ads_duo_tuner_init,
+ .sleep = ads_duo_tuner_sleep,
+ .config = 0
+};
+
static struct tda1004x_config ads_tech_duo_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X_GPL,
+ .agc_config = TDA10046_AGC_TDA827X,
+ .gpio_config = TDA10046_GP00_I,
.if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
+ .tuner_address = 0x61,
+ .request_firmware = philips_tda1004x_request_firmware
};
-/* ------------------------------------------------------------------ */
+static struct zl10353_config behold_h6_config = {
+ .demod_address = 0x1e>>1,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
-static int tevion_dvb220rf_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
-{
- int ret;
- ret = philips_tda827xa_pll_set(0x60, fe, params);
- return ret;
-}
+static struct xc5000_config behold_x7_tunerconfig = {
+ .i2c_address = 0xc2>>1,
+ .if_khz = 4560,
+ .radio_input = XC5000_RADIO_FM1,
+};
-static int tevion_dvb220rf_tuner_sleep(struct dvb_frontend *fe)
-{
- philips_tda827xa_tuner_sleep( 0x61, fe);
- return 0;
-}
+static struct zl10353_config behold_x7_config = {
+ .demod_address = 0x1e>>1,
+ .if2 = 45600,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
-static struct tda1004x_config tevion_dvbt220rf_config = {
- .demod_address = 0x08,
- .invert = 1,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
- .if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
+/* ==================================================================
+ * tda10086 based DVB-S cards, helper functions
+ */
+
+static struct tda10086_config flydvbs = {
+ .demod_address = 0x0e,
+ .invert = 0,
+ .diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_16M,
};
-/* ------------------------------------------------------------------ */
+static struct tda10086_config sd1878_4m = {
+ .demod_address = 0x0e,
+ .invert = 0,
+ .diseqc_tone = 0,
+ .xtal_freq = TDA10086_XTAL_4M,
+};
+
+/* ------------------------------------------------------------------
+ * special case: lnb supply is connected to the gated i2c
+ */
-static int md8800_dvbt_analog_mode(struct dvb_frontend *fe)
+static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
+ int res = -EIO;
struct saa7134_dev *dev = fe->dvb->priv;
- static u8 data[] = { 0x3c, 0x33, 0x68};
- struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dev->original_set_voltage)
+ res = dev->original_set_voltage(fe, voltage);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ return res;
+};
- i2c_transfer(&dev->i2c_adap, &msg, 1);
- philips_tda827xa_tuner_sleep( 0x61, fe);
- return 0;
-}
+static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
+{
+ int res = -EIO;
+ struct saa7134_dev *dev = fe->dvb->priv;
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dev->original_set_high_voltage)
+ res = dev->original_set_high_voltage(fe, arg);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ return res;
+};
-static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- int ret;
struct saa7134_dev *dev = fe->dvb->priv;
- static u8 tda8290_close[] = { 0x21, 0xc0};
- static u8 tda8290_open[] = { 0x21, 0x80};
- struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
- /* close tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_close;
- ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- if (ret != 1)
+ u8 wbuf[2] = { 0x1f, 00 };
+ u8 rbuf;
+ struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
+ { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
+
+ if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
return -EIO;
- msleep(20);
- ret = philips_tda827xa_pll_set(0x60, fe, params);
- if (ret != 0)
- return ret;
- /* open tda8290 i2c bridge */
- tda8290_msg.buf = tda8290_open;
- i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
- return ret;
+ /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
+ if (voltage == SEC_VOLTAGE_18)
+ wbuf[1] = rbuf | 0x10;
+ else
+ wbuf[1] = rbuf & 0xef;
+ msg[0].len = 2;
+ i2c_transfer(&dev->i2c_adap, msg, 1);
+ return 0;
}
-static struct tda1004x_config md8800_dvbt_config = {
- .demod_address = 0x08,
- .invert = 1,
- .invert_oclk = 0,
- .xtal_freq = TDA10046_XTAL_16M,
- .agc_config = TDA10046_AGC_TDA827X,
- .if_freq = TDA10046_FREQ_045,
- .request_firmware = NULL,
-};
-
-#endif
+static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
+{
+ struct saa7134_dev *dev = fe->dvb->priv;
+ wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__);
+ return -EIO;
+}
-/* ------------------------------------------------------------------ */
+/* ==================================================================
+ * nxt200x based ATSC cards, helper functions
+ */
-#ifdef HAVE_NXT200X
static struct nxt200x_config avertvhda180 = {
.demod_address = 0x0a,
};
-static int nxt200x_set_pll_input(u8 *buf, int input)
-{
- if (input)
- buf[3] |= 0x08;
- else
- buf[3] &= ~0x08;
- return 0;
-}
-
static struct nxt200x_config kworldatsc110 = {
.demod_address = 0x0a,
- .set_pll_input = nxt200x_set_pll_input,
};
-#endif
/* ------------------------------------------------------------------ */
+static struct mt312_config avertv_a700_mt312 = {
+ .demod_address = 0x0e,
+ .voltage_inverted = 1,
+};
+
+static struct zl10036_config avertv_a700_tuner = {
+ .tuner_address = 0x60,
+};
+
+static struct mt312_config zl10313_compro_s350_config = {
+ .demod_address = 0x0e,
+};
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
+static struct tda10048_config hcw_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+};
+
+static struct tda18271_config hcw_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .config = 3,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+ .probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda10048_config zolid_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+ .gate = TDA18271_GATE_ANALOG,
+};
+
+static struct tda10048_config dtv1000s_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map dtv1000s_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config dtv1000s_tda18271_config = {
+ .std_map = &dtv1000s_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+};
+
+/* ==================================================================
+ * Core code
+ */
+
static int dvb_init(struct saa7134_dev *dev)
{
+ int ret;
+ int attach_xc3028 = 0;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* FIXME: add support for multi-frontend */
+ mutex_init(&dev->frontends.lock);
+ INIT_LIST_HEAD(&dev->frontends.felist);
+
+ printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
+ fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
+ if (!fe0) {
+ printk(KERN_ERR "%s() failed to alloc\n", __func__);
+ return -ENOMEM;
+ }
+
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
- dev->dvb.name = dev->name;
- videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
- dev->pci, &dev->slock,
+ fe0->dvb.name = dev->name;
+ videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops,
+ &dev->pci->dev, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_ALTERNATE,
sizeof(struct saa7134_buf),
dev);
switch (dev->board) {
-#ifdef HAVE_MT352
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
- printk("%s: pinnacle 300i dvb setup\n",dev->name);
- dev->dvb.frontend = mt352_attach(&pinnacle_300i,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
+ dprintk("pinnacle 300i dvb setup\n");
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
}
break;
-
case SAA7134_BOARD_AVERMEDIA_777:
- printk("%s: avertv 777 dvb setup\n",dev->name);
- dev->dvb.frontend = mt352_attach(&avermedia_777,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.calc_regs = mt352_aver777_tuner_calc_regs;
+ case SAA7134_BOARD_AVERMEDIA_A16AR:
+ dprintk("avertv 777 dvb setup\n");
+ fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TD1316);
}
break;
-#endif
-#ifdef HAVE_TDA1004X
+ case SAA7134_BOARD_AVERMEDIA_A16D:
+ dprintk("AverMedia A16D dvb setup\n");
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
case SAA7134_BOARD_MD7134:
- dev->dvb.frontend = tda10046_attach(&medion_cardbus,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &medion_cardbus,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, medion_cardbus.tuner_address,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
case SAA7134_BOARD_PHILIPS_TOUGH:
- dev->dvb.frontend = tda10046_attach(&philips_tu1216_60_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_60_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_60_set_params;
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_tu1216_60_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
}
break;
case SAA7134_BOARD_FLYDVBTDUO:
- dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
- }
- break;
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
- dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
- }
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
- dev->dvb.frontend = tda10046_attach(&philips_europa_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
- dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
- dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
- }
- break;
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
- dev->dvb.frontend = tda10046_attach(&philips_europa_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
+ case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_europa_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
- dev->dvb.frontend = tda10046_attach(&philips_tu1216_61_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_61_init;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_61_set_params;
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_tu1216_61_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
+ }
+ break;
+ case SAA7134_BOARD_KWORLD_DVBT_210:
+ if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hcw_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
}
break;
case SAA7134_BOARD_PHILIPS_TIGER:
- dev->dvb.frontend = tda10046_attach(&philips_tiger_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_PINNACLE_PCTV_310i:
+ if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1110:
+ if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hcw_lgdt3305_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
}
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
- dev->dvb.frontend = tda10046_attach(&philips_tiger_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
- }
+ if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
- dev->dvb.frontend = tda10046_attach(&tda827x_lifeview_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
- }
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- dev->dvb.frontend = tda10046_attach(&lifeview_trio_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = lifeview_trio_tuner_set_params;
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &lifeview_trio_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap,
+ 0x08, 0, 0) == NULL) {
+ wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
}
break;
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
- dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
- }
+ case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &ads_tech_duo_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
+ ads_tech_duo_config.tuner_address, &dev->i2c_adap,
+ &ads_duo_cfg) == NULL) {
+ wprintk("no tda827x tuner found at addr: %02x\n",
+ ads_tech_duo_config.tuner_address);
+ goto dettach_frontend;
+ }
+ } else
+ wprintk("failed to attach tda10046\n");
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
- dev->dvb.frontend = tda10046_attach(&tevion_dvbt220rf_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.sleep = tevion_dvb220rf_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = tevion_dvb220rf_tuner_set_params;
+ if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_MEDION_MD8800_QUADRO:
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ struct dvb_frontend *fe = fe0->dvb.frontend;
+ u8 dev_id = dev->eedata[2];
+ u8 data = 0xc4;
+ struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
+
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Medion Quadro, no tda826x "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dev_id != 0x08) {
+ /* we need to open the i2c gate (we know it exists) */
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dvb_attach(isl6405_attach, fe,
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ wprintk("%s: Medion Quadro, no ISL6405 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dev_id == 0x07) {
+ /* fire up the 2nd section of the LNB supply since
+ we can't do this from the other section */
+ msg.buf = &data;
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ }
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ dev->original_set_voltage = fe->ops.set_voltage;
+ fe->ops.set_voltage = md8800_set_voltage;
+ dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
+ } else {
+ fe->ops.set_voltage = md8800_set_voltage2;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
+ }
+ }
}
break;
- case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
- dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
- dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
+ case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
+ NULL, DVB_PLL_TDHU2);
+ break;
+ case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
+ case SAA7134_BOARD_KWORLD_ATSC110:
+ fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_TUV1236D);
+ break;
+ case SAA7134_BOARD_FLYDVBS_LR300:
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ wprintk("%s: No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
+ }
}
break;
- case SAA7134_BOARD_MEDION_MD8800_QUADRO:
- dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config,
- &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
- dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode;
- dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
+ case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &medion_cardbus,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
+ fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
+
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, medion_cardbus.tuner_address,
+ TUNER_PHILIPS_FMD1216ME_MK3);
}
break;
-#endif
-#ifdef HAVE_NXT200X
- case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
- dev->dvb.frontend = nxt200x_attach(&avertvhda180, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_pll_attach(dev->dvb.frontend, 0x61, &dev->i2c_adap, &dvb_pll_tdhu2);
+ case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
+ fe0->dvb.frontend = dvb_attach(tda10046_attach,
+ &philips_europa_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
+ fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
}
break;
- case SAA7134_BOARD_KWORLD_ATSC110:
- dev->dvb.frontend = nxt200x_attach(&kworldatsc110, &dev->i2c_adap);
- if (dev->dvb.frontend) {
- dvb_pll_attach(dev->dvb.frontend, 0x61, &dev->i2c_adap, &dvb_pll_tuv1236d);
+ case SAA7134_BOARD_CINERGY_HT_PCMCIA:
+ if (configure_tda827x_fe(dev, &cinergy_ht_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_CINERGY_HT_PCI:
+ if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_PHILIPS_TIGER_S:
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_ASUS_P7131_4871:
+ if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
+ if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_AVERMEDIA_SUPER_007:
+ if (configure_tda827x_fe(dev, &avermedia_super_007_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
+ if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
+ &tda827x_cfg_2_sw42) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_PHILIPS_SNAKE:
+ fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
+ wprintk("%s: No lnbp21 found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
+ break;
+ case SAA7134_BOARD_CREATIX_CTX953:
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
+ dprintk("AverMedia E506R dvb setup\n");
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
+ case SAA7134_BOARD_MD7134_BRIDGE_2:
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &sd1878_4m, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ struct dvb_frontend *fe;
+ if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
+ wprintk("%s: MD7134 DVB-S, no SD1878 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ /* we need to open the i2c gate (we know it exists) */
+ fe = fe0->dvb.frontend;
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ if (dvb_attach(isl6405_attach, fe,
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
+ wprintk("%s: MD7134 DVB-S, no ISL6405 "
+ "found !\n", __func__);
+ goto dettach_frontend;
+ }
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ dev->original_set_voltage = fe->ops.set_voltage;
+ fe->ops.set_voltage = md8800_set_voltage;
+ dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
+ fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
+ }
+ break;
+ case SAA7134_BOARD_AVERMEDIA_M103:
+ saa7134_set_gpio(dev, 25, 0);
+ msleep(10);
+ saa7134_set_gpio(dev, 25, 1);
+ fe0->dvb.frontend = dvb_attach(mt352_attach,
+ &avermedia_xc3028_mt352_dev,
+ &dev->i2c_adap);
+ attach_xc3028 = 1;
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
+ } else { /* satellite */
+ fe0->dvb.frontend = dvb_attach(tda10086_attach,
+ &flydvbs, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(tda826x_attach,
+ fe0->dvb.frontend, 0x60,
+ &dev->i2c_adap, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no "
+ "tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
+ if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0, 0) == NULL) {
+ wprintk("%s: Asus Tiger 3in1, no lnbp21"
+ " found!\n", __func__);
+ goto dettach_frontend;
+ }
+ }
+ }
+ break;
+ case SAA7134_BOARD_ASUSTeK_TIGER:
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
+ break;
+ case SAA7134_BOARD_BEHOLD_H6:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_h6_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216MEX_MK3);
+ }
+ break;
+ case SAA7134_BOARD_BEHOLD_X7:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_x7_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, &behold_x7_tunerconfig);
+ }
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A700_PRO:
+ case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
+ /* Zarlink ZL10313 */
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &avertv_a700_mt312, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
+ &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
+ wprintk("%s: No zl10036 found!\n",
+ __func__);
+ }
+ }
+ break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_compro_s350_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+
+ break;
+ case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &zolid_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &zolid_tda18271_config);
+ }
+ break;
+ case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &dtv1000s_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &dtv1000s_tda18271_config);
}
break;
-#endif
default:
- printk("%s: Huh? unknown DVB card?\n",dev->name);
+ wprintk("Huh? unknown DVB card?\n");
break;
}
- if (NULL == dev->dvb.frontend) {
- printk("%s: frontend initialization failed\n",dev->name);
- return -1;
+ if (attach_xc3028) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_adap,
+ .i2c_addr = 0x61,
+ };
+
+ if (!fe0->dvb.frontend)
+ goto dettach_frontend;
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
+ if (!fe) {
+ printk(KERN_ERR "%s/2: xc3028 attach failed\n",
+ dev->name);
+ goto dettach_frontend;
+ }
+ }
+
+ if (NULL == fe0->dvb.frontend) {
+ printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
+ goto dettach_frontend;
}
+ /* define general-purpose callback pointer */
+ fe0->dvb.frontend->callback = saa7134_tuner_callback;
/* register everything else */
- return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
+ ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+ &dev->pci->dev, adapter_nr, 0, NULL);
+
+ /* this sequence is necessary to make the tda1004x load its firmware
+ * and to enter analog mode of hybrid boards
+ */
+ if (!ret) {
+ if (fe0->dvb.frontend->ops.init)
+ fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.sleep)
+ fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
+ if (fe0->dvb.frontend->ops.tuner_ops.sleep)
+ fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
+ }
+ return ret;
+
+dettach_frontend:
+ videobuf_dvb_dealloc_frontends(&dev->frontends);
+ return -EINVAL;
}
static int dvb_fini(struct saa7134_dev *dev)
{
- static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+ struct videobuf_dvb_frontend *fe0;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
+
+ /* FIXME: I suspect that this code is bogus, since the entry for
+ Pinnacle 300I DVB-T PAL already defines the proper init to allow
+ the detection of mt2032 (TDA9887_PORT2_INACTIVE)
+ */
+ if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
+ struct v4l2_priv_tun_config tda9887_cfg;
+ static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
+
+ tda9887_cfg.tuner = TUNER_TDA9887;
+ tda9887_cfg.priv = &on;
- switch (dev->board) {
- case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
/* otherwise we don't detect the tuner on next insmod */
- saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
- break;
- };
- videobuf_dvb_unregister(&dev->dvb);
+ saa_call_all(dev, tuner, s_config, &tda9887_cfg);
+ } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
+ if ((dev->eedata[2] == 0x07) && use_frontend) {
+ /* turn off the 2nd lnb supply */
+ u8 data = 0x80;
+ struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
+ struct dvb_frontend *fe;
+ fe = fe0->dvb.frontend;
+ if (fe->ops.i2c_gate_ctrl) {
+ fe->ops.i2c_gate_ctrl(fe, 1);
+ i2c_transfer(&dev->i2c_adap, &msg, 1);
+ fe->ops.i2c_gate_ctrl(fe, 0);
+ }
+ }
+ }
+ videobuf_dvb_unregister_bus(&dev->frontends);
return 0;
}