#include <linux/list.h>
#include <linux/module.h>
#include <linux/kernel.h>
-#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/suspend.h>
#include "tda1004x.h"
#include "nxt200x.h"
#include "tuner-xc2028.h"
+#include "xc5000.h"
#include "tda10086.h"
#include "tda826x.h"
#include "isl6405.h"
#include "lnbp21.h"
#include "tuner-simple.h"
+#include "tda10048.h"
+#include "tda18271.h"
+#include "lgdt3305.h"
+#include "tda8290.h"
+
+#include "zl10353.h"
+
+#include "zl10036.h"
+#include "zl10039.h"
+#include "mt312.h"
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
MODULE_LICENSE("GPL");
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
i2c_transfer(&dev->i2c_adap, &msg, 1);
- saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
+ saa_call_all(dev, tuner, s_frequency, &f);
msg.buf = on;
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
.request_firmware = philips_tda1004x_request_firmware
};
+static struct zl10353_config behold_h6_config = {
+ .demod_address = 0x1e>>1,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
+static struct xc5000_config behold_x7_tunerconfig = {
+ .i2c_address = 0xc2>>1,
+ .if_khz = 4560,
+ .radio_input = XC5000_RADIO_FM1,
+};
+
+static struct zl10353_config behold_x7_config = {
+ .demod_address = 0x1e>>1,
+ .if2 = 45600,
+ .no_tuner = 1,
+ .parallel_ts = 1,
+ .disable_i2c_gate_ctrl = 1,
+};
+
/* ==================================================================
* tda10086 based DVB-S cards, helper functions
*/
.demod_address = 0x0a,
};
+/* ------------------------------------------------------------------ */
+
+static struct mt312_config avertv_a700_mt312 = {
+ .demod_address = 0x0e,
+ .voltage_inverted = 1,
+};
+
+static struct zl10036_config avertv_a700_tuner = {
+ .tuner_address = 0x60,
+};
+
+static struct mt312_config zl10313_compro_s350_config = {
+ .demod_address = 0x0e,
+};
+
+static struct lgdt3305_config hcw_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
+static struct tda10048_config hcw_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map hauppauge_tda18271_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58, },
+};
+
+static struct tda18271_config hcw_tda18271_config = {
+ .std_map = &hauppauge_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .config = 3,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda829x_config tda829x_no_probe = {
+ .probe_tuner = TDA829X_DONT_PROBE,
+};
+
+static struct tda10048_config zolid_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_config zolid_tda18271_config = {
+ .gate = TDA18271_GATE_ANALOG,
+};
+
+static struct tda10048_config dtv1000s_tda10048_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_PARALLEL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+ .disable_gate_access = 1,
+};
+
+static struct tda18271_std_map dtv1000s_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config dtv1000s_tda18271_config = {
+ .std_map = &dtv1000s_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+};
+
/* ==================================================================
* Core code
*/
/* FIXME: add support for multi-frontend */
mutex_init(&dev->frontends.lock);
INIT_LIST_HEAD(&dev->frontends.felist);
- dev->frontends.active_fe_id = 0;
printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
-
- if (videobuf_dvb_alloc_frontend(dev, &dev->frontends, 1) == NULL) {
+ fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1);
+ if (!fe0) {
printk(KERN_ERR "%s() failed to alloc\n", __func__);
return -ENOMEM;
}
- /* Get the first frontend */
- fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
- if (!fe0)
- return -EINVAL;
-
/* init struct videobuf_dvb */
dev->ts.nr_bufs = 32;
dev->ts.nr_packets = 32*4;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
+ case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
fe0->dvb.frontend = dvb_attach(tda10046_attach,
&philips_europa_config,
&dev->i2c_adap);
&tda827x_cfg_2) < 0)
goto dettach_frontend;
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1120:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hcw_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
+ break;
case SAA7134_BOARD_PHILIPS_TIGER:
if (configure_tda827x_fe(dev, &philips_tiger_config,
&tda827x_cfg_0) < 0)
&tda827x_cfg_1) < 0)
goto dettach_frontend;
break;
+ case SAA7134_BOARD_HAUPPAUGE_HVR1150:
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hcw_lgdt3305_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &hcw_tda18271_config);
+ }
+ break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
&tda827x_cfg_0) < 0)
&tda827x_cfg_0) < 0)
goto dettach_frontend;
break;
+ case SAA7134_BOARD_BEHOLD_H6:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_h6_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216MEX_MK3);
+ }
+ break;
+ case SAA7134_BOARD_BEHOLD_X7:
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &behold_x7_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, &behold_x7_tunerconfig);
+ }
+ break;
+ case SAA7134_BOARD_AVERMEDIA_A700_PRO:
+ case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
+ /* Zarlink ZL10313 */
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &avertv_a700_mt312, &dev->i2c_adap);
+ if (fe0->dvb.frontend) {
+ if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
+ &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
+ wprintk("%s: No zl10036 found!\n",
+ __func__);
+ }
+ }
+ break;
+ case SAA7134_BOARD_VIDEOMATE_S350:
+ fe0->dvb.frontend = dvb_attach(mt312_attach,
+ &zl10313_compro_s350_config, &dev->i2c_adap);
+ if (fe0->dvb.frontend)
+ if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap) == NULL)
+ wprintk("%s: No zl10039 found!\n",
+ __func__);
+
+ break;
+ case SAA7134_BOARD_ZOLID_HYBRID_PCI:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &zolid_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &zolid_tda18271_config);
+ }
+ break;
+ case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &dtv1000s_tda10048_config,
+ &dev->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_adap, 0x4b,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_adap,
+ &dtv1000s_tda18271_config);
+ }
+ break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
};
if (!fe0->dvb.frontend)
- return -1;
+ goto dettach_frontend;
fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
if (!fe) {
if (NULL == fe0->dvb.frontend) {
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
- return -1;
+ goto dettach_frontend;
}
/* define general-purpose callback pointer */
fe0->dvb.frontend->callback = saa7134_tuner_callback;
/* register everything else */
ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
- &dev->pci->dev, adapter_nr, 0);
+ &dev->pci->dev, adapter_nr, 0, NULL);
/* this sequence is necessary to make the tda1004x load its firmware
* and to enter analog mode of hybrid boards
return ret;
dettach_frontend:
- if (fe0->dvb.frontend)
- dvb_frontend_detach(fe0->dvb.frontend);
- fe0->dvb.frontend = NULL;
-
- return -1;
+ videobuf_dvb_dealloc_frontends(&dev->frontends);
+ return -EINVAL;
}
static int dvb_fini(struct saa7134_dev *dev)
tda9887_cfg.priv = &on;
/* otherwise we don't detect the tuner on next insmod */
- saa7134_i2c_call_clients(dev, TUNER_SET_CONFIG, &tda9887_cfg);
+ saa_call_all(dev, tuner, s_config, &tda9887_cfg);
} else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
if ((dev->eedata[2] == 0x07) && use_frontend) {
/* turn off the 2nd lnb supply */
}
}
}
- if (fe0->dvb.frontend)
- videobuf_dvb_unregister_bus(&dev->frontends);
+ videobuf_dvb_unregister_bus(&dev->frontends);
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff