/*
*
- * $Id$
*
* Copyright (C) 2005 Mike Isely <isely@pobox.com>
*
#include <linux/videodev2.h>
#include <linux/i2c.h>
+#include <linux/workqueue.h>
#include <linux/mutex.h>
#include "pvrusb2-hdw.h"
#include "pvrusb2-io.h"
+#include <media/v4l2-device.h>
#include <media/cx2341x.h>
+#include "pvrusb2-devattr.h"
/* Legal values for PVR2_CID_HSM */
#define PVR2_CVAL_HSM_FAIL 0
#define LOCK_TAKE(x) do { mutex_lock(&x##_mutex); x##_held = !0; } while (0)
#define LOCK_GIVE(x) do { x##_held = 0; mutex_unlock(&x##_mutex); } while (0)
-struct pvr2_decoder;
-
typedef int (*pvr2_ctlf_is_dirty)(struct pvr2_ctrl *);
typedef void (*pvr2_ctlf_clear_dirty)(struct pvr2_ctrl *);
+typedef int (*pvr2_ctlf_check_value)(struct pvr2_ctrl *,int);
typedef int (*pvr2_ctlf_get_value)(struct pvr2_ctrl *,int *);
typedef int (*pvr2_ctlf_set_value)(struct pvr2_ctrl *,int msk,int val);
typedef int (*pvr2_ctlf_val_to_sym)(struct pvr2_ctrl *,int msk,int val,
/* Control's implementation */
pvr2_ctlf_get_value get_value; /* Get its value */
+ pvr2_ctlf_get_value get_def_value; /* Get its default value */
pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */
pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */
pvr2_ctlf_set_value set_value; /* Set its value */
+ pvr2_ctlf_check_value check_value; /* Check that value is valid */
pvr2_ctlf_val_to_sym val_to_sym; /* Custom convert value->symbol */
pvr2_ctlf_sym_to_val sym_to_val; /* Custom convert symbol->value */
pvr2_ctlf_is_dirty is_dirty; /* Return true if dirty */
};
-struct pvr2_audio_stat {
- void *ctxt;
- void (*detach)(void *);
- int (*status)(void *);
-};
-
-struct pvr2_decoder_ctrl {
- void *ctxt;
- void (*detach)(void *);
- void (*enable)(void *,int);
- int (*tuned)(void *);
- void (*force_reset)(void *);
-};
-
-#define PVR2_I2C_PEND_DETECT 0x01 /* Need to detect a client type */
-#define PVR2_I2C_PEND_CLIENT 0x02 /* Client needs a specific update */
-#define PVR2_I2C_PEND_REFRESH 0x04 /* Client has specific pending bits */
-#define PVR2_I2C_PEND_STALE 0x08 /* Broadcast pending bits */
-
-#define PVR2_I2C_PEND_ALL (PVR2_I2C_PEND_DETECT |\
- PVR2_I2C_PEND_CLIENT |\
- PVR2_I2C_PEND_REFRESH |\
- PVR2_I2C_PEND_STALE)
/* Disposition of firmware1 loading situation */
#define FW1_STATE_UNKNOWN 0
#define FW1_STATE_RELOAD 3
#define FW1_STATE_OK 4
-/* Known major hardware variants, keyed from device ID */
-#define PVR2_HDW_TYPE_29XXX 0
-#define PVR2_HDW_TYPE_24XXX 1
+/* What state the device is in if it is a hybrid */
+#define PVR2_PATHWAY_UNKNOWN 0
+#define PVR2_PATHWAY_ANALOG 1
+#define PVR2_PATHWAY_DIGITAL 2
typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16);
#define PVR2_I2C_FUNC_CNT 128
struct usb_device *usb_dev;
struct usb_interface *usb_intf;
- /* Device type, one of PVR2_HDW_TYPE_xxxxx */
- unsigned int hdw_type;
+ /* Our handle into the v4l2 sub-device architecture */
+ struct v4l2_device v4l2_dev;
+ /* Device description, anything that must adjust behavior based on
+ device specific info will use information held here. */
+ const struct pvr2_device_desc *hdw_desc;
+
+ /* Kernel worker thread handling */
+ struct workqueue_struct *workqueue;
+ struct work_struct workpoll; /* Update driver state */
/* Video spigot */
struct pvr2_stream *vid_stream;
struct mutex big_lock_mutex;
int big_lock_held; /* For debugging */
- void (*poll_trigger_func)(void *);
- void *poll_trigger_data;
-
+ /* This is a simple string which identifies the instance of this
+ driver. It is unique within the set of existing devices, but
+ there is no attempt to keep the name consistent with the same
+ physical device each time. */
char name[32];
+ /* This is a simple string which identifies the physical device
+ instance itself - if possible. (If not possible, then it is
+ based on the specific driver instance, similar to name above.)
+ The idea here is that userspace might hopefully be able to use
+ this recognize specific tuners. It will encode a serial number,
+ if available. */
+ char identifier[32];
+
/* I2C stuff */
struct i2c_adapter i2c_adap;
struct i2c_algorithm i2c_algo;
pvr2_i2c_func i2c_func[PVR2_I2C_FUNC_CNT];
int i2c_cx25840_hack_state;
int i2c_linked;
- unsigned int i2c_pend_types; /* Which types of update are needed */
- unsigned long i2c_pend_mask; /* Change bits we need to scan */
- unsigned long i2c_stale_mask; /* Pending broadcast change bits */
- unsigned long i2c_active_mask; /* All change bits currently in use */
- struct list_head i2c_clients;
- struct mutex i2c_list_lock;
+
+ /* IR related */
+ unsigned int ir_scheme_active; /* IR scheme as seen from the outside */
/* Frequency table */
unsigned int freqTable[FREQTABLE_SIZE];
unsigned int freqProgSlot;
- unsigned int freqSlot;
/* Stuff for handling low level control interaction with device */
struct mutex ctl_lock_mutex;
struct urb *ctl_read_urb;
unsigned char *ctl_write_buffer;
unsigned char *ctl_read_buffer;
- volatile int ctl_write_pend_flag;
- volatile int ctl_read_pend_flag;
- volatile int ctl_timeout_flag;
+ int ctl_write_pend_flag;
+ int ctl_read_pend_flag;
+ int ctl_timeout_flag;
struct completion ctl_done;
unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE];
int cmd_debug_state; // Low level command debugging info
unsigned int cmd_debug_write_len; //
unsigned int cmd_debug_read_len; //
- int flag_ok; // device in known good state
- int flag_disconnected; // flag_ok == 0 due to disconnect
- int flag_init_ok; // true if structure is fully initialized
- int flag_streaming_enabled; // true if streaming should be on
- int fw1_state; // current situation with fw1
-
- int flag_decoder_is_tuned;
-
- struct pvr2_decoder_ctrl *decoder_ctrl;
+ /* Bits of state that describe what is going on with various parts
+ of the driver. */
+ int state_pathway_ok; /* Pathway config is ok */
+ int state_encoder_ok; /* Encoder is operational */
+ int state_encoder_run; /* Encoder is running */
+ int state_encoder_config; /* Encoder is configured */
+ int state_encoder_waitok; /* Encoder pre-wait done */
+ int state_encoder_runok; /* Encoder has run for >= .25 sec */
+ int state_decoder_run; /* Decoder is running */
+ int state_usbstream_run; /* FX2 is streaming */
+ int state_decoder_quiescent; /* Decoder idle for > 50msec */
+ int state_pipeline_config; /* Pipeline is configured */
+ int state_pipeline_req; /* Somebody wants to stream */
+ int state_pipeline_pause; /* Pipeline must be paused */
+ int state_pipeline_idle; /* Pipeline not running */
+
+ /* This is the master state of the driver. It is the combined
+ result of other bits of state. Examining this will indicate the
+ overall state of the driver. Values here are one of
+ PVR2_STATE_xxxx */
+ unsigned int master_state;
+
+ /* True if device led is currently on */
+ int led_on;
+
+ /* True if states must be re-evaluated */
+ int state_stale;
+
+ void (*state_func)(void *);
+ void *state_data;
+
+ /* Timer for measuring decoder settling time */
+ struct timer_list quiescent_timer;
+
+ /* Timer for measuring encoder pre-wait time */
+ struct timer_list encoder_wait_timer;
+
+ /* Timer for measuring encoder minimum run time */
+ struct timer_list encoder_run_timer;
+
+ /* Place to block while waiting for state changes */
+ wait_queue_head_t state_wait_data;
+
+
+ int force_dirty; /* consider all controls dirty if true */
+ int flag_ok; /* device in known good state */
+ int flag_disconnected; /* flag_ok == 0 due to disconnect */
+ int flag_init_ok; /* true if structure is fully initialized */
+ int fw1_state; /* current situation with fw1 */
+ int pathway_state; /* one of PVR2_PATHWAY_xxx */
+ int flag_decoder_missed;/* We've noticed missing decoder */
+ int flag_tripped; /* Indicates overall failure to start */
+
+ unsigned int decoder_client_id;
// CPU firmware info (used to help find / save firmware data)
char *fw_buffer;
unsigned int fw_size;
-
- // Which subsystem pieces have been enabled / configured
- unsigned long subsys_enabled_mask;
-
- // Which subsystems are manipulated to enable streaming
- unsigned long subsys_stream_mask;
-
- // True if there is a request to trigger logging of state in each
- // module.
- int log_requested;
+ int fw_cpu_flag; /* True if we are dealing with the CPU */
/* Tuner / frequency control stuff */
unsigned int tuner_type;
int tuner_updated;
- unsigned int freqVal;
+ unsigned int freqValTelevision; /* Current freq for tv mode */
+ unsigned int freqValRadio; /* Current freq for radio mode */
+ unsigned int freqSlotTelevision; /* Current slot for tv mode */
+ unsigned int freqSlotRadio; /* Current slot for radio mode */
+ unsigned int freqSelector; /* 0=radio 1=television */
int freqDirty;
+ /* Current tuner info - this information is polled from the I2C bus */
+ struct v4l2_tuner tuner_signal_info;
+ int tuner_signal_stale;
+
+ /* Cropping capability info */
+ struct v4l2_cropcap cropcap_info;
+ int cropcap_stale;
+
/* Video standard handling */
v4l2_std_id std_mask_eeprom; // Hardware supported selections
v4l2_std_id std_mask_avail; // Which standards we may select from
int unit_number; /* ID for driver instance */
unsigned long serial_number; /* ID for hardware itself */
- /* Minor number used by v4l logic (yes, this is a hack, as there should
- be no v4l junk here). Probably a better way to do this. */
- int v4l_minor_number;
+ char bus_info[32]; /* Bus location info */
+
+ /* Minor numbers used by v4l logic (yes, this is a hack, as there
+ should be no v4l junk here). Probably a better way to do this. */
+ int v4l_minor_number_video;
+ int v4l_minor_number_vbi;
+ int v4l_minor_number_radio;
+
+ /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */
+ unsigned int input_avail_mask;
+ /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */
+ unsigned int input_allowed_mask;
/* Location of eeprom or a negative number if none */
int eeprom_addr;
- enum pvr2_config config;
-
- /* Information about what audio signal we're hearing */
- int flag_stereo;
- int flag_bilingual;
- struct pvr2_audio_stat *audio_stat;
+ enum pvr2_config active_stream_type;
+ enum pvr2_config desired_stream_type;
/* Control state needed for cx2341x module */
struct cx2341x_mpeg_params enc_cur_state;
struct cx2341x_mpeg_params enc_ctl_state;
/* True if an encoder attribute has changed */
int enc_stale;
+ /* True if an unsafe encoder attribute has changed */
+ int enc_unsafe_stale;
/* True if enc_cur_state is valid */
int enc_cur_valid;
VCREATE_DATA(bass);
VCREATE_DATA(treble);
VCREATE_DATA(mute);
+ VCREATE_DATA(cropl);
+ VCREATE_DATA(cropt);
+ VCREATE_DATA(cropw);
+ VCREATE_DATA(croph);
VCREATE_DATA(input);
VCREATE_DATA(audiomode);
VCREATE_DATA(res_hor);
unsigned int control_cnt;
};
+/* This function gets the current frequency */
+unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *);
+
+void pvr2_hdw_status_poll(struct pvr2_hdw *);
+
#endif /* __PVRUSB2_HDW_INTERNAL_H */
/*
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff