#include <linux/i2c-algo-bit.h>
#include <linux/list.h>
#include <linux/unistd.h>
-#include <linux/byteorder/swab.h>
#include <linux/pagemap.h>
+#include <linux/scatterlist.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/uaccess.h>
#include <asm/system.h>
+#include <asm/byteorder.h>
#include <linux/dvb/video.h>
#include <linux/dvb/audio.h>
#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
#include <media/tuner.h>
#include <media/cx2341x.h>
+#include <media/ir-kbd-i2c.h>
#include <linux/ivtv.h>
-
/* Memory layout */
#define IVTV_ENCODER_OFFSET 0x00000000
#define IVTV_ENCODER_SIZE 0x00800000 /* Total size is 0x01000000, but only first half is used */
#define IVTV_REG_VPU (0x9058)
#define IVTV_REG_APU (0xA064)
-/* i2c stuff */
-#define I2C_CLIENTS_MAX 16
-
/* debugging */
extern int ivtv_debug;
/* Flag to turn on high volume debugging */
#define IVTV_DBGFLG_HIGHVOL (1 << 10)
-/* NOTE: extra space before comma in 'itv->num , ## args' is required for
- gcc-2.95, otherwise it won't compile. */
#define IVTV_DEBUG(x, type, fmt, args...) \
do { \
if ((x) & ivtv_debug) \
- printk(KERN_INFO "ivtv%d " type ": " fmt, itv->num , ## args); \
+ v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \
} while (0)
#define IVTV_DEBUG_WARN(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
#define IVTV_DEBUG_INFO(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_INFO, "info", fmt , ## args)
#define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \
do { \
- if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) \
- printk(KERN_INFO "ivtv%d " type ": " fmt, itv->num , ## args); \
+ if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL)) \
+ v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args); \
} while (0)
#define IVTV_DEBUG_HI_WARN(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN, "warn", fmt , ## args)
#define IVTV_DEBUG_HI_INFO(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO, "info", fmt , ## args)
#define IVTV_DEBUG_HI_YUV(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV, "yuv", fmt , ## args)
/* Standard kernel messages */
-#define IVTV_ERR(fmt, args...) printk(KERN_ERR "ivtv%d: " fmt, itv->num , ## args)
-#define IVTV_WARN(fmt, args...) printk(KERN_WARNING "ivtv%d: " fmt, itv->num , ## args)
-#define IVTV_INFO(fmt, args...) printk(KERN_INFO "ivtv%d: " fmt, itv->num , ## args)
+#define IVTV_ERR(fmt, args...) v4l2_err(&itv->v4l2_dev, fmt , ## args)
+#define IVTV_WARN(fmt, args...) v4l2_warn(&itv->v4l2_dev, fmt , ## args)
+#define IVTV_INFO(fmt, args...) v4l2_info(&itv->v4l2_dev, fmt , ## args)
/* output modes (cx23415 only) */
#define OUT_NONE 0
#define IVTV_MAX_PGM_INDEX (400)
+/* Default I2C SCL period in microseconds */
+#define IVTV_DEFAULT_I2C_CLOCK_PERIOD 20
+
struct ivtv_options {
int kilobytes[IVTV_MAX_STREAMS]; /* size in kilobytes of each stream */
int cardtype; /* force card type on load */
int tuner; /* set tuner on load */
int radio; /* enable/disable radio */
int newi2c; /* new I2C algorithm */
+ int i2c_clock_period; /* period of SCL for I2C bus */
};
/* ivtv-specific mailbox template */
#define IVTV_F_I_DEC_PAUSED 20 /* the decoder is paused */
#define IVTV_F_I_INITED 21 /* set after first open */
#define IVTV_F_I_FAILED 22 /* set if first open failed */
+#define IVTV_F_I_WORK_INITED 23 /* worker thread was initialized */
/* Event notifications */
#define IVTV_F_I_EV_DEC_STOPPED 28 /* decoder stopped event */
/* Scatter-Gather array element, used in DMA transfers */
struct ivtv_sg_element {
+ __le32 src;
+ __le32 dst;
+ __le32 size;
+};
+
+struct ivtv_sg_host_element {
u32 src;
u32 dst;
u32 size;
struct ivtv_stream {
/* These first four fields are always set, even if the stream
is not actually created. */
- struct video_device *v4l2dev; /* NULL when stream not created */
+ struct video_device *vdev; /* NULL when stream not created */
struct ivtv *itv; /* for ease of use */
const char *name; /* name of the stream */
int type; /* stream type */
u16 dma_xfer_cnt;
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_sg_element *sg_pending;
- struct ivtv_sg_element *sg_processing;
+ struct ivtv_sg_host_element *sg_pending;
+ struct ivtv_sg_host_element *sg_processing;
struct ivtv_sg_element *sg_dma;
dma_addr_t sg_handle;
int sg_pending_size;
u32 tru_h;
u32 offset_y;
s32 lace_mode;
+ u32 sync_field;
+ u32 delay;
+ u32 interlaced;
};
#define IVTV_YUV_MODE_INTERLACED 0x00
#define IVTV_YUV_SYNC_ODD 0x04
#define IVTV_YUV_SYNC_MASK 0x04
+#define IVTV_YUV_BUFFERS 8
+
struct yuv_playback_info
{
u32 reg_2834;
int v_filter_2;
int h_filter;
+ u8 track_osd; /* Should yuv output track the OSD size & position */
+
u32 osd_x_offset;
u32 osd_y_offset;
u32 osd_vis_w;
u32 osd_vis_h;
- int decode_height;
+ u32 osd_full_w;
+ u32 osd_full_h;
- int frame_interlaced;
+ int decode_height;
int lace_mode;
int lace_threshold;
u32 yuv_forced_update;
int update_frame;
- int sync_field[4]; /* Field to sync on */
- int field_delay[4]; /* Flag to extend duration of previous frame */
u8 fields_lapsed; /* Counter used when delaying a frame */
- struct yuv_frame_info new_frame_info[4];
+ struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS];
struct yuv_frame_info old_frame_info;
struct yuv_frame_info old_frame_info_args;
void *blanking_ptr;
dma_addr_t blanking_dmaptr;
+
+ int stream_size;
+
+ u8 draw_frame; /* PVR350 buffer to draw into */
+ u8 max_frames_buffered; /* Maximum number of frames to buffer */
+
+ struct v4l2_rect main_rect;
+ u32 v4l2_src_w;
+ u32 v4l2_src_h;
+
+ u8 running; /* Have any frames been displayed */
};
#define IVTV_VBI_FRAMES 32
/* Struct to hold info about ivtv cards */
struct ivtv {
/* General fixed card data */
- int num; /* board number, -1 during init! */
- char name[8]; /* board name for printk and interrupts (e.g. 'ivtv0') */
- struct pci_dev *dev; /* PCI device */
+ struct pci_dev *pdev; /* PCI device */
const struct ivtv_card *card; /* card information */
const char *card_name; /* full name of the card */
+ const struct ivtv_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
u8 has_cx23415; /* 1 if it is a cx23415 based card, 0 for cx23416 */
u8 pvr150_workaround; /* 1 if the cx25840 needs to workaround a PVR150 bug */
u8 nof_inputs; /* number of video inputs */
u8 nof_audio_inputs; /* number of audio inputs */
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* hardware description of the board */
- int tunerid; /* userspace tuner ID for experimental Xceive tuner support */
v4l2_std_id tuner_std; /* the norm of the card's tuner (fixed) */
- /* controlling video decoder function */
- int (*video_dec_func)(struct ivtv *, unsigned int, void *);
+ struct v4l2_subdev *sd_video; /* controlling video decoder subdev */
+ struct v4l2_subdev *sd_audio; /* controlling audio subdev */
+ struct v4l2_subdev *sd_muxer; /* controlling audio muxer subdev */
u32 base_addr; /* PCI resource base address */
volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
volatile void __iomem *reg_mem; /* pointer to mapped registers */
struct ivtv_options options; /* user options */
+ struct v4l2_device v4l2_dev;
+ struct v4l2_subdev sd_gpio; /* GPIO sub-device */
+ u16 instance;
/* High-level state info */
unsigned long i_flags; /* global ivtv flags */
spinlock_t lock; /* lock access to this struct */
struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */
-
/* Streams */
int stream_buf_size[IVTV_MAX_STREAMS]; /* stream buffer size */
struct ivtv_stream streams[IVTV_MAX_STREAMS]; /* stream data */
struct i2c_adapter i2c_adap;
struct i2c_algo_bit_data i2c_algo;
struct i2c_client i2c_client;
- struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];/* pointers to all I2C clients */
int i2c_state; /* i2c bit state */
struct mutex i2c_bus_lock; /* lock i2c bus */
+ struct IR_i2c_init_data ir_i2c_init_data;
/* Program Index information */
u32 pgm_info_offset; /* start of pgm info in encoder memory */
u64 vbi_data_inserted; /* number of VBI bytes inserted into the MPEG stream */
u32 last_dec_timing[3]; /* cache last retrieved pts/scr/frame values */
unsigned long dualwatch_jiffies;/* jiffies value of the previous dualwatch check */
- u16 dualwatch_stereo_mode; /* current detected dualwatch stereo mode */
+ u32 dualwatch_stereo_mode; /* current detected dualwatch stereo mode */
/* VBI state info */
struct osd_info *osd_info; /* ivtvfb private OSD info */
};
+static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct ivtv, v4l2_dev);
+}
+
/* Globals */
-extern struct ivtv *ivtv_cards[];
-extern int ivtv_cards_active;
extern int ivtv_first_minor;
-extern spinlock_t ivtv_cards_lock;
/*==============Prototypes==================*/
/* First-open initialization: load firmware, init cx25840, etc. */
int ivtv_init_on_first_open(struct ivtv *itv);
+/* Test if the current VBI mode is raw (1) or sliced (0) */
+static inline int ivtv_raw_vbi(const struct ivtv *itv)
+{
+ return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
+}
+
/* This is a PCI post thing, where if the pci register is not read, then
the write doesn't always take effect right away. By reading back the
register any pending PCI writes will be performed (in order), and so
#define write_dec_sync(val, addr) \
do { write_dec(val, addr); read_dec(addr); } while (0)
+/* Call the specified callback for all subdevs matching hw (if 0, then
+ match them all). Ignore any errors. */
+#define ivtv_call_hw(itv, hw, o, f, args...) \
+ __v4l2_device_call_subdevs(&(itv)->v4l2_dev, !(hw) || (sd->grp_id & (hw)), o, f , ##args)
+
+#define ivtv_call_all(itv, o, f, args...) ivtv_call_hw(itv, 0, o, f , ##args)
+
+/* Call the specified callback for all subdevs matching hw (if 0, then
+ match them all). If the callback returns an error other than 0 or
+ -ENOIOCTLCMD, then return with that error code. */
+#define ivtv_call_hw_err(itv, hw, o, f, args...) \
+ __v4l2_device_call_subdevs_until_err(&(itv)->v4l2_dev, !(hw) || (sd->grp_id & (hw)), o, f , ##args)
+
+#define ivtv_call_all_err(itv, o, f, args...) ivtv_call_hw_err(itv, 0, o, f , ##args)
+
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff