#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include "cx88.h"
#include "tea5767.h"
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ /* Some variants use a tda9874 and so need the tvaudio module. */
+ .audio_chip = V4L2_IDENT_TVAUDIO,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
},
},
[CX88_BOARD_WINFAST_DTV2000H] = {
- /* video inputs and radio still in testing */
.name = "WinFast DTV2000 H",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.radio_type = UNSET,
.gpio1 = 0x00008203,
.gpio2 = 0x00017304,
.gpio3 = 0x02000000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0001d701,
+ .gpio1 = 0x0000b207,
+ .gpio2 = 0x0001d701,
+ .gpio3 = 0x02000000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE2,
+ .vmux = 2,
+ .gpio0 = 0x0001d503,
+ .gpio1 = 0x0000b207,
+ .gpio2 = 0x0001d503,
+ .gpio3 = 0x02000000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 3,
+ .gpio0 = 0x0001d701,
+ .gpio1 = 0x0000b207,
+ .gpio2 = 0x0001d701,
+ .gpio3 = 0x02000000,
}},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x00015702,
+ .gpio1 = 0x0000f207,
+ .gpio2 = 0x00015702,
+ .gpio3 = 0x02000000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_WINFAST_DTV2000H_J] = {
+ .name = "WinFast DTV2000 H rev. J",
+ .tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .tda9887_conf = TDA9887_PRESENT,
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x00017300,
+ .gpio1 = 0x00008207,
+ .gpio2 = 0x00000000,
+ .gpio3 = 0x02000000,
+ },{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x00018300,
+ .gpio1 = 0x0000f207,
+ .gpio2 = 0x00017304,
+ .gpio3 = 0x02000000,
+ },{
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x00018301,
+ .gpio1 = 0x0000f207,
+ .gpio2 = 0x00017304,
+ .gpio3 = 0x02000000,
+ },{
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x00018301,
+ .gpio1 = 0x0000f207,
+ .gpio2 = 0x00017304,
+ .gpio3 = 0x02000000,
+ }},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x00015702,
+ .gpio1 = 0x0000f207,
+ .gpio2 = 0x00015702,
+ .gpio3 = 0x02000000,
+ },
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_GENIATECH_DVBS] = {
.mpeg = CX88_MPEG_DVB,
},
[CX88_BOARD_HAUPPAUGE_HVR3000] = {
- /* FIXME: Add dvb & radio support */
.name = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T",
.tuner_type = TUNER_PHILIPS_FMD1216ME_MK3,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x84bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0x84bf,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x84bf,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
+ },
.mpeg = CX88_MPEG_DVB,
.num_frontends = 2,
},
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xef88,
+ /* 1: TV Audio / FM Mono */
.audioroute = 1,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xef88,
+ /* 2: Line-In */
.audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xef88,
+ /* 2: Line-In */
.audioroute = 2,
}},
- /* fixme: Add radio support */
.mpeg = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD,
.radio = {
.type = CX88_RADIO,
.gpio0 = 0xef88,
+ /* 4: FM Stereo (untested) */
+ .audioroute = 8,
},
},
+ [CX88_BOARD_SAMSUNG_SMT_7020] = {
+ .name = "Samsung SMT 7020 DVB-S",
+ .tuner_type = TUNER_ABSENT,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
[CX88_BOARD_ADSTECH_PTV_390] = {
.name = "ADS Tech Instant Video PCI",
.tuner_type = TUNER_ABSENT,
},
.mpeg = CX88_MPEG_DVB,
},
+ /* Terry Wu <terrywu2009@gmail.com> */
+ /* TV Audio : set GPIO 2, 18, 19 value to 0, 1, 0 */
+ /* FM Audio : set GPIO 2, 18, 19 value to 0, 0, 0 */
+ /* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */
+ /* Mute Audio : set GPIO 2 value to 1 */
[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
- .name = "Winfast TV2000 XP Global",
+ .name = "Leadtek TV2000 XP Global",
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
+ .radio_type = TUNER_XC2028,
+ .radio_addr = 0x61,
.input = { {
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
- .gpio0 = 0x0400, /* pin 2:mute = 0 (off?) */
+ .gpio0 = 0x0400, /* pin 2 = 0 */
.gpio1 = 0x0000,
- .gpio2 = 0x0800, /* pin 19:audio = 0 (tv) */
-
+ .gpio2 = 0x0C04, /* pin 18 = 1, pin 19 = 0 */
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
- .gpio0 = 0x0400, /* probably? or 0x0404 to turn mute on */
+ .gpio0 = 0x0400, /* pin 2 = 0 */
.gpio1 = 0x0000,
- .gpio2 = 0x0808, /* pin 19:audio = 1 (line) */
-
+ .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */
+ .gpio3 = 0x0000,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0C0C, /* pin 18 = 1, pin 19 = 1 */
+ .gpio3 = 0x0000,
} },
.radio = {
.type = CX88_RADIO,
- .gpio0 = 0x004ff,
- .gpio1 = 0x010ff,
- .gpio2 = 0x0ff,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x0000,
+ .gpio2 = 0x0C00, /* pin 18 = 0, pin 19 = 0 */
+ .gpio3 = 0x0000,
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda9887_conf = TDA9887_PRESENT,
+ .audio_chip = V4L2_IDENT_WM8775,
/*
* GPIO0 (WINTV2000)
*
* BIT VALUE FUNCTION GP{x}_IO
* 0 1 I:?
* 1 1 I:?
- * 2 1 O:DVB-T DEMOD ENABLE LOW/ANALOG DEMOD ENABLE HIGH
+ * 2 1 O:MPEG PORT 0=DVB-T 1=DVB-S
* 3 1 I:?
* 4 1 I:?
* 5 1 I:?
* d 0 I
* e 1 O
* f 1 O
+ *
+ * WM8775 ADC
+ *
+ * 1: TV Audio / FM Mono
+ * 2: Line-In
+ * 3: Line-In Expansion
+ * 4: FM Stereo
*/
.input = {{
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0xc4bf,
+ /* 1: TV Audio / FM Mono */
+ .audioroute = 1,
}, {
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
.gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
}, {
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
.gpio0 = 0xc4bf,
+ /* 2: Line-In */
+ .audioroute = 2,
} },
- /* fixme: Add radio support */
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0xc4bf,
+ /* 4: FM Stereo */
+ .audioroute = 8,
+ },
.mpeg = CX88_MPEG_DVB,
.num_frontends = 2,
},
} },
.mpeg = CX88_MPEG_DVB,
},
+ [CX88_BOARD_TBS_8910] = {
+ .name = "TBS 8910 DVB-S",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
[CX88_BOARD_TBS_8920] = {
.name = "TBS 8920 DVB-S/S2",
.tuner_type = TUNER_ABSENT,
.radio_addr = ADDR_UNSET,
.input = {{
.type = CX88_VMUX_DVB,
- .vmux = 1,
+ .vmux = 0,
+ .gpio0 = 0x8080,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROF_6200] = {
+ .name = "Prof 6200 DVB-S",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
} },
.mpeg = CX88_MPEG_DVB,
},
} },
.mpeg = CX88_MPEG_DVB,
},
+ [CX88_BOARD_SATTRADE_ST4200] = {
+ .name = "SATTRADE ST4200 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = {{
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII] = {
+ .name = "Terratec Cinergy HT PCI MKII",
+ .tuner_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .radio_type = TUNER_XC2028,
+ .radio_addr = 0x61,
+ .input = { {
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x00001,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x004fb,
+ .gpio1 = 0x010ef,
+ .audioroute = 1,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x004ff,
+ .gpio1 = 0x010ff,
+ .gpio2 = 0x0ff,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_HAUPPAUGE_IRONLY] = {
+ .name = "Hauppauge WinTV-IR Only",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ },
+ [CX88_BOARD_WINFAST_DTV1800H] = {
+ .name = "Leadtek WinFast DTV1800 Hybrid",
+ .tuner_type = TUNER_XC2028,
+ .radio_type = TUNER_XC2028,
+ .tuner_addr = 0x61,
+ .radio_addr = 0x61,
+ /*
+ * GPIO setting
+ *
+ * 2: mute (0=off,1=on)
+ * 12: tuner reset pin
+ * 13: audio source (0=tuner audio,1=line in)
+ * 14: FM (0=on,1=off ???)
+ */
+ .input = {{
+ .type = CX88_VMUX_TELEVISION,
+ .vmux = 0,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6040, /* pin 13 = 0, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_COMPOSITE1,
+ .vmux = 1,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ }, {
+ .type = CX88_VMUX_SVIDEO,
+ .vmux = 2,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6060, /* pin 13 = 1, pin 14 = 1 */
+ .gpio2 = 0x0000,
+ } },
+ .radio = {
+ .type = CX88_RADIO,
+ .gpio0 = 0x0400, /* pin 2 = 0 */
+ .gpio1 = 0x6000, /* pin 13 = 0, pin 14 = 0 */
+ .gpio2 = 0x0000,
+ },
+ .mpeg = CX88_MPEG_DVB,
+ },
+ [CX88_BOARD_PROF_7301] = {
+ .name = "Prof 7301 DVB-S/S2",
+ .tuner_type = UNSET,
+ .radio_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .radio_addr = ADDR_UNSET,
+ .input = { {
+ .type = CX88_VMUX_DVB,
+ .vmux = 0,
+ } },
+ .mpeg = CX88_MPEG_DVB,
+ },
};
/* ------------------------------------------------------------------ */
.subvendor = PCI_VENDOR_ID_ATI,
.subdevice = 0x00f8,
.card = CX88_BOARD_ATI_WONDER_PRO,
- },{
+ }, {
+ .subvendor = PCI_VENDOR_ID_ATI,
+ .subdevice = 0x00f9,
+ .card = CX88_BOARD_ATI_WONDER_PRO,
+ }, {
.subvendor = 0x107d,
.subdevice = 0x6611,
.card = CX88_BOARD_WINFAST2000XP_EXPERT,
.subdevice = 0x665e,
.card = CX88_BOARD_WINFAST_DTV2000H,
},{
+ .subvendor = 0x107d,
+ .subdevice = 0x6f2b,
+ .card = CX88_BOARD_WINFAST_DTV2000H_J,
+ },{
.subvendor = 0x18ac,
.subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */
.card = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
.subvendor = 0x0070,
.subdevice = 0x1404,
.card = CX88_BOARD_HAUPPAUGE_HVR3000,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdc00,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
+ }, {
+ .subvendor = 0x18ac,
+ .subdevice = 0xdccd,
+ .card = CX88_BOARD_SAMSUNG_SMT_7020,
},{
.subvendor = 0x1461,
.subdevice = 0xc111, /* AverMedia M150-D */
.subdevice = 0x2011,
.card = CX88_BOARD_OMICOM_SS4_PCI,
}, {
+ .subvendor = 0x8910,
+ .subdevice = 0x8888,
+ .card = CX88_BOARD_TBS_8910,
+ }, {
.subvendor = 0x8920,
.subdevice = 0x8888,
.card = CX88_BOARD_TBS_8920,
}, {
+ .subvendor = 0xb022,
+ .subdevice = 0x3022,
+ .card = CX88_BOARD_PROF_6200,
+ }, {
.subvendor = 0xB033,
.subdevice = 0x3033,
.card = CX88_BOARD_PROF_7300,
+ }, {
+ .subvendor = 0xb200,
+ .subdevice = 0x4200,
+ .card = CX88_BOARD_SATTRADE_ST4200,
+ }, {
+ .subvendor = 0x153b,
+ .subdevice = 0x1177,
+ .card = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII,
+ }, {
+ .subvendor = 0x0070,
+ .subdevice = 0x9290,
+ .card = CX88_BOARD_HAUPPAUGE_IRONLY,
+ }, {
+ .subvendor = 0x107d,
+ .subdevice = 0x6654,
+ .card = CX88_BOARD_WINFAST_DTV1800H,
+ }, {
+ /* PVR2000 PAL Model [107d:6630] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6630,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 PAL Model [107d:6638] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6638,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:6631] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6631,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:6637] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6637,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* PVR2000 NTSC Model [107d:663d] */
+ .subvendor = 0x107d,
+ .subdevice = 0x663d,
+ .card = CX88_BOARD_LEADTEK_PVR2000,
+ }, {
+ /* DV2000 NTSC Model [107d:6621] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6621,
+ .card = CX88_BOARD_WINFAST_DV2000,
+ }, {
+ /* TV2000 XP Global [107d:6618] */
+ .subvendor = 0x107d,
+ .subdevice = 0x6618,
+ .card = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+ }, {
+ .subvendor = 0xb034,
+ .subdevice = 0x3034,
+ .card = CX88_BOARD_PROF_7301,
},
};
static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
{
- /* This is just for the "Winfast 2000XP Expert" board ATM; I don't have data on
- * any others.
- *
- * Byte 0 is 1 on the NTSC board.
- */
-
if (eeprom_data[4] != 0x7d ||
eeprom_data[5] != 0x10 ||
eeprom_data[7] != 0x66) {
return;
}
- core->board.tuner_type = (eeprom_data[6] == 0x13) ?
- TUNER_PHILIPS_FM1236_MK3 : TUNER_PHILIPS_FM1216ME_MK3;
+ /* Terry Wu <terrywu2009@gmail.com> */
+ switch (eeprom_data[6]) {
+ case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */
+ case 0x21: /* SSID 6621 for DV2000 NTSC Model */
+ case 0x31: /* SSID 6631 for PVR2000 NTSC Model */
+ case 0x37: /* SSID 6637 for PVR2000 NTSC Model */
+ case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */
+ core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3;
+ break;
+ default:
+ core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
+ break;
+ }
info_printk(core, "Leadtek Winfast 2000XP Expert config: "
"tuner=%d, eeprom[0]=0x%02x\n",
case 90500: /* Nova-T-PCI (oem) */
case 90501: /* Nova-T-PCI (oem/IR) */
case 92000: /* Nova-SE2 (OEM, No Video or IR) */
+ case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */
case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
/* known */
break;
+ case CX88_BOARD_SAMSUNG_SMT_7020:
+ cx_set(MO_GP0_IO, 0x008989FF);
+ break;
default:
warn_printk(core, "warning: unknown hauppauge model #%d\n",
tv.model);
return -EINVAL;
}
+static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
+ int command, int arg)
+{
+ switch (command) {
+ case XC2028_TUNER_RESET:
+ /* GPIO 12 (xc3028 tuner reset) */
+ cx_set(MO_GP1_IO, 0x1010);
+ mdelay(50);
+ cx_clear(MO_GP1_IO, 0x10);
+ mdelay(50);
+ cx_set(MO_GP1_IO, 0x10);
+ mdelay(50);
+ return 0;
+ }
+ return -EINVAL;
+}
+
/* ------------------------------------------------------------------- */
/* some Divco specific stuff */
static int cx88_pv_8000gt_callback(struct cx88_core *core,
{
/* Board-specific callbacks */
switch (core->boardnr) {
- case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
case CX88_BOARD_GENIATECH_X8000_MT:
case CX88_BOARD_KWORLD_ATSC_120:
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
return cx88_dvico_xc2028_callback(core, command, arg);
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+ case CX88_BOARD_WINFAST_DTV1800H:
+ return cx88_xc3028_winfast1800h_callback(core, command, arg);
}
switch (command) {
switch (core->boardnr) {
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
if (command == 0) { /* This is the reset command from xc5000 */
- /* Reset XC5000 tuner via SYS_RSTO_pin */
- cx_write(MO_SRST_IO, 0);
- msleep(10);
- cx_write(MO_SRST_IO, 1);
+
+ /* djh - According to the engineer at PCTV Systems,
+ the xc5000 reset pin is supposed to be on GPIO12.
+ However, despite three nights of effort, pulling
+ that GPIO low didn't reset the xc5000. While
+ pulling MO_SRST_IO low does reset the xc5000, this
+ also resets in the s5h1409 being reset as well.
+ This causes tuning to always fail since the internal
+ state of the s5h1409 does not match the driver's
+ state. Given that the only two conditions in which
+ the driver performs a reset is during firmware load
+ and powering down the chip, I am taking out the
+ reset. We know that the chip is being reset
+ when the cx88 comes online, and not being able to
+ do power management for this board is worse than
+ not having any tuning at all. */
return 0;
} else {
err_printk(core, "xc5000: unknown tuner "
case CX88_BOARD_HAUPPAUGE_HVR3000:
case CX88_BOARD_HAUPPAUGE_HVR4000:
- case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
/* Init GPIO */
cx_write(MO_GP0_IO, core->board.input[0].gpio0);
udelay(1000);
+ cx_clear(MO_GP0_IO, 0x00000080);
+ udelay(50);
+ cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+ udelay(1000);
+ break;
+
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+ case CX88_BOARD_WINFAST_DTV1800H:
+ /* GPIO 12 (xc3028 tuner reset) */
+ cx_set(MO_GP1_IO, 0x1010);
+ mdelay(50);
+ cx_clear(MO_GP1_IO, 0x10);
+ mdelay(50);
+ cx_set(MO_GP1_IO, 0x10);
+ mdelay(50);
break;
}
}
core->i2c_algo.udelay = 16;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+ case CX88_BOARD_WINFAST_DTV1800H:
ctl->demod = XC3028_FE_ZARLINK456;
break;
case CX88_BOARD_KWORLD_ATSC_120:
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
ctl->demod = XC3028_FE_OREN538;
break;
+ case CX88_BOARD_GENIATECH_X8000_MT:
+ /* FIXME: For this board, the xc3028 never recovers after being
+ powered down (the reset GPIO probably is not set properly).
+ We don't have access to the hardware so we cannot determine
+ which GPIO is used for xc3028, so just disable power xc3028
+ power management for now */
+ ctl->disable_power_mgmt = 1;
+ break;
+ case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
case CX88_BOARD_PROLINK_PV_8000GT:
/*
*/
break;
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+ case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII:
ctl->demod = XC3028_FE_ZARLINK456;
ctl->mts = 1;
break;
if (0 == core->i2c_rc)
gdi_eeprom(core, eeprom);
break;
+ case CX88_BOARD_LEADTEK_PVR2000:
+ case CX88_BOARD_WINFAST_DV2000:
case CX88_BOARD_WINFAST2000XP_EXPERT:
if (0 == core->i2c_rc)
leadtek_eeprom(core, eeprom);
case CX88_BOARD_HAUPPAUGE_HVR1300:
case CX88_BOARD_HAUPPAUGE_HVR4000:
case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+ case CX88_BOARD_HAUPPAUGE_IRONLY:
if (0 == core->i2c_rc)
hauppauge_eeprom(core, eeprom);
break;
tea5767_cfg.tuner = TUNER_TEA5767;
tea5767_cfg.priv = &ctl;
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tea5767_cfg);
+ call_all(core, tuner, s_config, &tea5767_cfg);
break;
}
case CX88_BOARD_TEVII_S420:
case CX88_BOARD_TEVII_S460:
case CX88_BOARD_OMICOM_SS4_PCI:
+ case CX88_BOARD_TBS_8910:
case CX88_BOARD_TBS_8920:
+ case CX88_BOARD_PROF_6200:
case CX88_BOARD_PROF_7300:
+ case CX88_BOARD_PROF_7301:
+ case CX88_BOARD_SATTRADE_ST4200:
+ cx_write(MO_GP0_IO, 0x8000);
+ msleep(100);
cx_write(MO_SRST_IO, 0);
+ msleep(10);
+ cx_write(MO_GP0_IO, 0x8080);
msleep(100);
cx_write(MO_SRST_IO, 1);
msleep(100);
tun_setup.type = core->board.radio_type;
tun_setup.addr = core->board.radio_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
- cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ call_all(core, tuner, s_type_addr, &tun_setup);
mode_mask &= ~T_RADIO;
}
tun_setup.addr = core->board.tuner_addr;
tun_setup.tuner_callback = cx88_tuner_callback;
- cx88_call_i2c_clients(core, TUNER_SET_TYPE_ADDR, &tun_setup);
+ call_all(core, tuner, s_type_addr, &tun_setup);
}
if (core->board.tda9887_conf) {
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &core->board.tda9887_conf;
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &tda9887_cfg);
+ call_all(core, tuner, s_config, &tda9887_cfg);
}
if (core->board.tuner_type == TUNER_XC2028) {
xc2028_cfg.priv = &ctl;
info_printk(core, "Asking xc2028/3028 to load firmware %s\n",
ctl.fname);
- cx88_call_i2c_clients(core, TUNER_SET_CONFIG, &xc2028_cfg);
+ call_all(core, tuner, s_config, &xc2028_cfg);
}
- cx88_call_i2c_clients (core, TUNER_SET_STANDBY, NULL);
+ call_all(core, core, s_power, 0);
}
/* ------------------------------------------------------------------ */
int i;
core = kzalloc(sizeof(*core), GFP_KERNEL);
+ if (core == NULL)
+ return NULL;
atomic_inc(&core->refcount);
core->pci_bus = pci->bus->number;
core->nr = nr;
sprintf(core->name, "cx88[%d]", core->nr);
+
+ strcpy(core->v4l2_dev.name, core->name);
+ if (v4l2_device_register(NULL, &core->v4l2_dev)) {
+ kfree(core);
+ return NULL;
+ }
+
if (0 != cx88_get_resources(core, pci)) {
+ v4l2_device_unregister(&core->v4l2_dev);
kfree(core);
return NULL;
}
pci_resource_len(pci, 0));
core->bmmio = (u8 __iomem *)core->lmmio;
+ if (core->lmmio == NULL) {
+ kfree(core);
+ return NULL;
+ }
+
/* board config */
core->boardnr = UNSET;
if (card[core->nr] < ARRAY_SIZE(cx88_boards))
cx88_card_list(core, pci);
}
- memset(&core->board, 0, sizeof(core->board));
memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
- if (!core->board.num_frontends)
- core->board.num_frontends=1;
+ if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
+ core->board.num_frontends = 1;
info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
pci->subsystem_vendor, pci->subsystem_device, core->board.name,
cx88_i2c_init(core, pci);
/* load tuner module, if needed */
- if (TUNER_ABSENT != core->board.tuner_type)
- request_module("tuner");
+ if (TUNER_ABSENT != core->board.tuner_type) {
+ /* Ignore 0x6b and 0x6f on cx88 boards.
+ * FusionHDTV5 RT Gold has an ir receiver at 0x6b
+ * and an RTC at 0x6f which can get corrupted if probed. */
+ static const unsigned short tv_addrs[] = {
+ 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */
+ 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+ 0x68, 0x69, 0x6a, 0x6c, 0x6d, 0x6e,
+ I2C_CLIENT_END
+ };
+ int has_demod = (core->board.tda9887_conf & TDA9887_PRESENT);
+
+ /* I don't trust the radio_type as is stored in the card
+ definitions, so we just probe for it.
+ The radio_type is sometimes missing, or set to UNSET but
+ later code configures a tea5767.
+ */
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+ "tuner", "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ if (has_demod)
+ v4l2_i2c_new_subdev(&core->v4l2_dev,
+ &core->i2c_adap, "tuner", "tuner",
+ 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+ if (core->board.tuner_addr == ADDR_UNSET) {
+ v4l2_i2c_new_subdev(&core->v4l2_dev,
+ &core->i2c_adap, "tuner", "tuner",
+ 0, has_demod ? tv_addrs + 4 : tv_addrs);
+ } else {
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+ "tuner", "tuner", core->board.tuner_addr, NULL);
+ }
+ }
cx88_card_setup(core);
cx88_ir_init(core, pci);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff