/*
* Driver for the Conexant CX23885 PCIe bridge
*
- * Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "cx23885.h"
#include <media/v4l2-common.h>
+#include "dvb_ca_en50221.h"
#include "s5h1409.h"
+#include "s5h1411.h"
#include "mt2131.h"
#include "tda8290.h"
#include "tda18271.h"
#include "lgdt330x.h"
#include "xc5000.h"
-#include "dvb-pll.h"
+#include "tda10048.h"
#include "tuner-xc2028.h"
-#include "tuner-xc2028-types.h"
+#include "tuner-simple.h"
+#include "dib7000p.h"
+#include "dibx000_common.h"
+#include "zl10353.h"
+#include "stv0900.h"
+#include "stv0900_reg.h"
+#include "stv6110.h"
+#include "lnbh24.h"
+#include "cx24116.h"
+#include "cimax2.h"
+#include "lgs8gxx.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
+#include "lgdt3305.h"
static unsigned int debug;
module_param(alt_tuner, int, 0644);
MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration");
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
/* ------------------------------------------------------------------ */
static int dvb_buf_setup(struct videobuf_queue *q,
struct videobuf_buffer *vb, enum v4l2_field field)
{
struct cx23885_tsport *port = q->priv_data;
- return cx23885_buf_prepare(q, port, (struct cx23885_buffer*)vb, field);
+ return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field);
}
static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb)
{
struct cx23885_tsport *port = q->priv_data;
- cx23885_buf_queue(port, (struct cx23885_buffer*)vb);
+ cx23885_buf_queue(port, (struct cx23885_buffer *)vb);
}
static void dvb_buf_release(struct videobuf_queue *q,
struct videobuf_buffer *vb)
{
- cx23885_free_buffer(q, (struct cx23885_buffer*)vb);
+ cx23885_free_buffer(q, (struct cx23885_buffer *)vb);
}
static struct videobuf_queue_ops dvb_qops = {
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
+static struct tda10048_config hauppauge_hvr1200_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3800,
+ .dtv8_if_freq_khz = TDA10048_IF_4300,
+ .clk_freq_khz = TDA10048_CLK_16000,
+};
+
+static struct tda10048_config hauppauge_hvr1210_config = {
+ .demod_address = 0x10 >> 1,
+ .output_mode = TDA10048_SERIAL_OUTPUT,
+ .fwbulkwritelen = TDA10048_BULKWRITE_200,
+ .inversion = TDA10048_INVERSION_ON,
+ .dtv6_if_freq_khz = TDA10048_IF_3300,
+ .dtv7_if_freq_khz = TDA10048_IF_3500,
+ .dtv8_if_freq_khz = TDA10048_IF_4000,
+ .clk_freq_khz = TDA10048_CLK_16000,
+};
+
static struct s5h1409_config hauppauge_ezqam_config = {
.demod_address = 0x32 >> 1,
.output_mode = S5H1409_SERIAL_OUTPUT,
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
};
+static struct s5h1409_config dvico_s5h1409_config = {
+ .demod_address = 0x32 >> 1,
+ .output_mode = S5H1409_SERIAL_OUTPUT,
+ .gpio = S5H1409_GPIO_ON,
+ .qam_if = 44000,
+ .inversion = S5H1409_INVERSION_OFF,
+ .status_mode = S5H1409_DEMODLOCKING,
+ .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config dvico_s5h1411_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_ON,
+ .qam_if = S5H1411_IF_44000,
+ .vsb_if = S5H1411_IF_44000,
+ .inversion = S5H1411_INVERSION_OFF,
+ .status_mode = S5H1411_DEMODLOCKING,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
+static struct s5h1411_config hcw_s5h1411_config = {
+ .output_mode = S5H1411_SERIAL_OUTPUT,
+ .gpio = S5H1411_GPIO_OFF,
+ .vsb_if = S5H1411_IF_44000,
+ .qam_if = S5H1411_IF_4000,
+ .inversion = S5H1411_INVERSION_ON,
+ .status_mode = S5H1411_DEMODLOCKING,
+ .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
+};
+
static struct xc5000_config hauppauge_hvr1500q_tunerconfig = {
.i2c_address = 0x61,
.if_khz = 5380,
- .tuner_callback = cx23885_tuner_callback
+};
+
+static struct xc5000_config dvico_xc5000_tunerconfig = {
+ .i2c_address = 0x64,
+ .if_khz = 5380,
};
static struct tda829x_config tda829x_no_probe = {
};
static struct tda18271_std_map hauppauge_tda18271_std_map = {
- .atsc_6 = { .if_freq = 5380, .std_bits = 0x1b },
- .qam_6 = { .if_freq = 4000, .std_bits = 0x18 },
+ .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
+ .if_lvl = 6, .rfagc_top = 0x37 },
+};
+
+static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = {
+ .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x37, },
+ .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
+ .if_lvl = 1, .rfagc_top = 0x37, },
};
static struct tda18271_config hauppauge_tda18271_config = {
.std_map = &hauppauge_tda18271_std_map,
.gate = TDA18271_GATE_ANALOG,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1200_tuner_config = {
+ .std_map = &hauppauge_hvr1200_tda18271_std_map,
+ .gate = TDA18271_GATE_ANALOG,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_config hauppauge_hvr1210_tuner_config = {
+ .gate = TDA18271_GATE_DIGITAL,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct tda18271_std_map hauppauge_hvr127x_std_map = {
+ .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
+ .if_lvl = 1, .rfagc_top = 0x58 },
+ .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
+ .if_lvl = 1, .rfagc_top = 0x58 },
+};
+
+static struct tda18271_config hauppauge_hvr127x_config = {
+ .std_map = &hauppauge_hvr127x_std_map,
+ .output_opt = TDA18271_OUTPUT_LT_OFF,
+};
+
+static struct lgdt3305_config hauppauge_lgdt3305_config = {
+ .i2c_addr = 0x0e,
+ .mpeg_mode = LGDT3305_MPEG_SERIAL,
+ .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
+ .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
+ .deny_i2c_rptr = 1,
+ .spectral_inversion = 1,
+ .qam_if_khz = 4000,
+ .vsb_if_khz = 3250,
+};
+
+static struct dibx000_agc_config xc3028_agc_config = {
+ BAND_VHF | BAND_UHF, /* band_caps */
+
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
+ * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+ * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0,
+ * P_agc_nb_est=2, P_agc_write=0
+ */
+ (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
+ (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
+
+ 712, /* inv_gain */
+ 21, /* time_stabiliz */
+
+ 0, /* alpha_level */
+ 118, /* thlock */
+
+ 0, /* wbd_inv */
+ 2867, /* wbd_ref */
+ 0, /* wbd_sel */
+ 2, /* wbd_alpha */
+
+ 0, /* agc1_max */
+ 0, /* agc1_min */
+ 39718, /* agc2_max */
+ 9930, /* agc2_min */
+ 0, /* agc1_pt1 */
+ 0, /* agc1_pt2 */
+ 0, /* agc1_pt3 */
+ 0, /* agc1_slope1 */
+ 0, /* agc1_slope2 */
+ 0, /* agc2_pt1 */
+ 128, /* agc2_pt2 */
+ 29, /* agc2_slope1 */
+ 29, /* agc2_slope2 */
+
+ 17, /* alpha_mant */
+ 27, /* alpha_exp */
+ 23, /* beta_mant */
+ 51, /* beta_exp */
+
+ 1, /* perform_agc_softsplit */
+};
+
+/* PLL Configuration for COFDM BW_MHz = 8.000000
+ * With external clock = 30.000000 */
+static struct dibx000_bandwidth_config xc3028_bw_config = {
+ 60000, /* internal */
+ 30000, /* sampling */
+ 1, /* pll_cfg: prediv */
+ 8, /* pll_cfg: ratio */
+ 3, /* pll_cfg: range */
+ 1, /* pll_cfg: reset */
+ 0, /* pll_cfg: bypass */
+ 0, /* misc: refdiv */
+ 0, /* misc: bypclk_div */
+ 1, /* misc: IO_CLK_en_core */
+ 1, /* misc: ADClkSrc */
+ 0, /* misc: modulo */
+ (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
+ (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
+ 20452225, /* timf */
+ 30000000 /* xtal_hz */
+};
+
+static struct dib7000p_config hauppauge_hvr1400_dib7000_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .tuner_is_baseband = 0,
+ .update_lna = NULL,
+
+ .agc_config_count = 1,
+ .agc = &xc3028_agc_config,
+ .bw = &xc3028_bw_config,
+
+ .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
+
+ .pwm_freq_div = 0,
+ .agc_control = NULL,
+ .spur_protect = 0,
+
+ .output_mode = OUTMODE_MPEG2_SERIAL,
+};
+
+static struct zl10353_config dvico_fusionhdtv_xc3028 = {
+ .demod_address = 0x0f,
+ .if2 = 45600,
+ .no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
-static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
+static struct stv0900_reg stv0900_ts_regs[] = {
+ { R0900_TSGENERAL, 0x00 },
+ { R0900_P1_TSSPEED, 0x40 },
+ { R0900_P2_TSSPEED, 0x40 },
+ { R0900_P1_TSCFGM, 0xc0 },
+ { R0900_P2_TSCFGM, 0xc0 },
+ { R0900_P1_TSCFGH, 0xe0 },
+ { R0900_P2_TSCFGH, 0xe0 },
+ { R0900_P1_TSCFGL, 0x20 },
+ { R0900_P2_TSCFGL, 0x20 },
+ { 0xffff, 0xff }, /* terminate */
+};
+
+static struct stv0900_config netup_stv0900_config = {
+ .demod_address = 0x68,
+ .xtal = 8000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .ts_config_regs = stv0900_ts_regs,
+ .tun1_maddress = 0,/* 0x60 */
+ .tun2_maddress = 3,/* 0x63 */
+ .tun1_adc = 1,/* 1 Vpp */
+ .tun2_adc = 1,/* 1 Vpp */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_a = {
+ .i2c_address = 0x60,
+ .mclk = 16000000,
+ .clk_div = 1,
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_b = {
+ .i2c_address = 0x63,
+ .mclk = 16000000,
+ .clk_div = 1,
+};
+
+static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
- struct cx23885_tsport *port = ptr;
+ struct cx23885_tsport *port = fe->dvb->priv;
struct cx23885_dev *dev = port->dev;
- switch (command) {
- case XC2028_TUNER_RESET:
- /* Send the tuner in then out of reset */
- /* GPIO-2 xc3028 tuner */
- dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __FUNCTION__, arg);
+ if (voltage == SEC_VOLTAGE_18)
+ cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
+ else if (voltage == SEC_VOLTAGE_13)
+ cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
+ else
+ cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
+ return 0;
+}
- cx_set(GP0_IO, 0x00040000);
- cx_clear(GP0_IO, 0x00000004);
- msleep(5);
+static struct cx24116_config tbs_cx24116_config = {
+ .demod_address = 0x05,
+};
- cx_set(GP0_IO, 0x00040004);
- msleep(5);
- break;
- case XC2028_RESET_CLK:
- dprintk(1, "%s: XC2028_RESET_CLK %d\n", __FUNCTION__, arg);
+static struct cx24116_config tevii_cx24116_config = {
+ .demod_address = 0x55,
+};
+
+static struct cx24116_config dvbworld_cx24116_config = {
+ .demod_address = 0x05,
+};
+
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+ .prod = LGS8GXX_PROD_LGS8GL5,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 5380, /* 5.38 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 0,
+ .if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 5380,
+};
+
+static int cx23885_dvb_set_frontend(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *param)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ switch (param->u.vsb.modulation) {
+ case VSB_8:
+ cx23885_gpio_clear(dev, GPIO_5);
+ break;
+ case QAM_64:
+ case QAM_256:
+ default:
+ cx23885_gpio_set(dev, GPIO_5);
+ break;
+ }
break;
- default:
- dprintk(1, "%s: unknown command %d, arg %d\n", __FUNCTION__,
- command, arg);
- return -EINVAL;
}
-
- return 0;
+ return (port->set_frontend_save) ?
+ port->set_frontend_save(fe, param) : -ENODEV;
}
+static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = {
+ .prod = LGS8GXX_PROD_LGS8G75,
+ .demod_address = 0x19,
+ .serial_ts = 0,
+ .ts_clk_pol = 1,
+ .ts_clk_gated = 1,
+ .if_clk_freq = 30400, /* 30.4 MHz */
+ .if_freq = 6500, /* 6.50 MHz */
+ .if_neg_center = 1,
+ .ext_adc = 0,
+ .adc_signed = 1,
+ .adc_vpp = 2, /* 1.6 Vpp */
+ .if_neg_edge = 1,
+};
+
+static struct xc5000_config magicpro_prohdtve2_xc5000_config = {
+ .i2c_address = 0x61,
+ .if_khz = 6500,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
- struct cx23885_i2c *i2c_bus = NULL;
+ struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
+ struct videobuf_dvb_frontend *fe0;
+ int ret;
+
+ /* Get the first frontend */
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+ if (!fe0)
+ return -EINVAL;
/* init struct videobuf_dvb */
- port->dvb.name = dev->name;
+ fe0->dvb.name = dev->name;
/* init frontend */
switch (dev->board) {
case CX23885_BOARD_HAUPPAUGE_HVR1250:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1270:
+ case CX23885_BOARD_HAUPPAUGE_HVR1275:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
+ &hauppauge_lgdt3305_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr127x_config);
+ }
+
+ /* FIXME: temporary hack */
+ /* define bridge override to set_frontend */
+ port->set_frontend_save = fe0->dvb.frontend->ops.set_frontend;
+ fe0->dvb.frontend->ops.set_frontend = cx23885_dvb_set_frontend;
+
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+ }
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
switch (alt_tuner) {
case 1:
- port->dvb.frontend =
+ fe0->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_ezqam_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(tda829x_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
&dev->i2c_bus[1].i2c_adap, 0x42,
&tda829x_no_probe);
- dvb_attach(tda18271_attach, port->dvb.frontend,
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
break;
case 0:
default:
- port->dvb.frontend =
+ fe0->dvb.frontend =
dvb_attach(s5h1409_attach,
&hauppauge_generic_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL)
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
break;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1800lp_config,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(mt2131_attach, port->dvb.frontend,
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(mt2131_attach, fe0->dvb.frontend,
&i2c_bus->i2c_adap,
&hauppauge_generic_tunerconfig, 0);
}
break;
case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP:
i2c_bus = &dev->i2c_bus[0];
- port->dvb.frontend = dvb_attach(lgdt330x_attach,
+ fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_express,
&i2c_bus->i2c_adap);
- if (port->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, port->dvb.frontend, 0x61,
- &i2c_bus->i2c_adap, DVB_PLL_LG_TDVS_H06XF);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap, 0x61,
+ TUNER_LG_TDVS_H06XF);
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
i2c_bus = &dev->i2c_bus[1];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
- if (port->dvb.frontend != NULL) {
- hauppauge_hvr1500q_tunerconfig.priv = i2c_bus;
- dvb_attach(xc5000_attach, port->dvb.frontend,
- &i2c_bus->i2c_adap,
- &hauppauge_hvr1500q_tunerconfig);
- }
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &hauppauge_hvr1500q_tunerconfig);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
- port->dvb.frontend = dvb_attach(s5h1409_attach,
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500_config,
&dev->i2c_bus[0].i2c_adap);
- if (port->dvb.frontend != NULL) {
+ if (fe0->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
.i2c_adap = &i2c_bus->i2c_adap,
.i2c_addr = 0x61,
- .video_dev = port,
- .callback = cx23885_hvr1500_xc3028_callback,
};
static struct xc2028_ctrl ctl = {
- .fname = "xc3028-v27.fw",
+ .fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
- .scode_table = OREN538,
+ .demod = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
- port->dvb.frontend, &cfg);
+ fe0->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1200:
+ case CX23885_BOARD_HAUPPAUGE_HVR1700:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hauppauge_hvr1200_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda829x_attach, fe0->dvb.frontend,
+ &dev->i2c_bus[1].i2c_adap, 0x42,
+ &tda829x_no_probe);
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr1200_tuner_config);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1210:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(tda10048_attach,
+ &hauppauge_hvr1210_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_hvr1210_tuner_config);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1400:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(dib7000p_attach,
+ &i2c_bus->i2c_adap,
+ 0x12, &hauppauge_hvr1400_dib7000_config);
+ if (fe0->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_bus[1].i2c_adap,
+ .i2c_addr = 0x64,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = XC3028L_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = 5000,
+ /* This is true for all demods with
+ v36 firmware? */
+ .type = XC2028_D2633,
+ };
+
+ fe = dvb_attach(xc2028_attach,
+ fe0->dvb.frontend, &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP:
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+ &dvico_s5h1409_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend == NULL)
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &dvico_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(xc5000_attach, fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &dvico_xc5000_tunerconfig);
+ break;
+ case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: {
+ i2c_bus = &dev->i2c_bus[port->nr - 1];
+
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &i2c_bus->i2c_adap,
+ .i2c_addr = 0x61,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+ &cfg);
+ if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+ fe->ops.tuner_ops.set_config(fe, &ctl);
+ }
+ break;
+ }
+ case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
+ case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ i2c_bus = &dev->i2c_bus[0];
+
+ fe0->dvb.frontend = dvb_attach(zl10353_attach,
+ &dvico_fusionhdtv_xc3028,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ struct dvb_frontend *fe;
+ struct xc2028_config cfg = {
+ .i2c_adap = &dev->i2c_bus[1].i2c_adap,
+ .i2c_addr = 0x61,
+ };
+ static struct xc2028_ctrl ctl = {
+ .fname = XC2028_DEFAULT_FIRMWARE,
+ .max_len = 64,
+ .demod = XC3028_FE_ZARLINK456,
+ };
+
+ fe = dvb_attach(xc2028_attach, fe0->dvb.frontend,
+ &cfg);
if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX23885_BOARD_TBS_6920:
+ i2c_bus = &dev->i2c_bus[0];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &tbs_cx24116_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+
+ break;
+ case CX23885_BOARD_TEVII_S470:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &tevii_cx24116_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+
+ break;
+ case CX23885_BOARD_DVBWORLD_2005:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &dvbworld_cx24116_config,
+ &i2c_bus->i2c_adap);
+ break;
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ i2c_bus = &dev->i2c_bus[0];
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 0);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_a,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL,
+ LNBH24_TTX, 0x09))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ /* port C */
+ case 2:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 1);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_b,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL,
+ LNBH24_TTX, 0x0a))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ }
+ break;
+ case CX23885_BOARD_MYGICA_X8506:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &mygica_x8506_lgs8gl5_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &mygica_x8506_xc5000_config);
+ }
+ break;
+ case CX23885_BOARD_MAGICPRO_PROHDTVE2:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+ &magicpro_prohdtve2_lgs8g75_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(xc5000_attach,
+ fe0->dvb.frontend,
+ &i2c_bus2->i2c_adap,
+ &magicpro_prohdtve2_xc5000_config);
+ }
+ break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+ &hcw_s5h1411_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ dvb_attach(tda18271_attach, fe0->dvb.frontend,
+ 0x60, &dev->i2c_bus[0].i2c_adap,
+ &hauppauge_tda18271_config);
+ break;
+
default:
- printk("%s: The frontend of your DVB/ATSC card isn't supported yet\n",
+ printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
+ " isn't supported yet\n",
dev->name);
break;
}
- if (NULL == port->dvb.frontend) {
- printk("%s: frontend initialization failed\n", dev->name);
+ if (NULL == fe0->dvb.frontend) {
+ printk(KERN_ERR "%s: frontend initialization failed\n",
+ dev->name);
return -1;
}
+ /* define general-purpose callback pointer */
+ fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
- cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
+ call_all(dev, tuner, s_standby);
- if (port->dvb.frontend->ops.analog_ops.standby)
- port->dvb.frontend->ops.analog_ops.standby(port->dvb.frontend);
+ if (fe0->dvb.frontend->ops.analog_ops.standby)
+ fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
/* register everything */
- return videobuf_dvb_register(&port->dvb, THIS_MODULE, port,
- &dev->pci->dev);
+ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+ &dev->pci->dev, adapter_nr, 0);
+
+ /* init CI & MAC */
+ switch (dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+ static struct netup_card_info cinfo;
+
+ netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+ memcpy(port->frontends.adapter.proposed_mac,
+ cinfo.port[port->nr - 1].mac, 6);
+ printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC="
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ port->nr,
+ port->frontends.adapter.proposed_mac[0],
+ port->frontends.adapter.proposed_mac[1],
+ port->frontends.adapter.proposed_mac[2],
+ port->frontends.adapter.proposed_mac[3],
+ port->frontends.adapter.proposed_mac[4],
+ port->frontends.adapter.proposed_mac[5]);
+
+ netup_ci_init(port);
+ break;
+ }
+ }
+
+ return ret;
}
int cx23885_dvb_register(struct cx23885_tsport *port)
{
+
+ struct videobuf_dvb_frontend *fe0;
struct cx23885_dev *dev = port->dev;
- int err;
+ int err, i;
+
+ /* Here we need to allocate the correct number of frontends,
+ * as reflected in the cards struct. The reality is that currently
+ * no cx23885 boards support this - yet. But, if we don't modify this
+ * code then the second frontend would never be allocated (later)
+ * and fail with error before the attach in dvb_register().
+ * Without these changes we risk an OOPS later. The changes here
+ * are for safety, and should provide a good foundation for the
+ * future addition of any multi-frontend cx23885 based boards.
+ */
+ printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__,
+ port->num_frontends);
+
+ for (i = 1; i <= port->num_frontends; i++) {
+ if (videobuf_dvb_alloc_frontend(
+ &port->frontends, i) == NULL) {
+ printk(KERN_ERR "%s() failed to alloc\n", __func__);
+ return -ENOMEM;
+ }
- dprintk(1, "%s\n", __FUNCTION__);
- dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
- dev->board,
- dev->name,
- dev->pci_bus,
- dev->pci_slot);
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, i);
+ if (!fe0)
+ err = -EINVAL;
- err = -ENODEV;
+ dprintk(1, "%s\n", __func__);
+ dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n",
+ dev->board,
+ dev->name,
+ dev->pci_bus,
+ dev->pci_slot);
- /* dvb stuff */
- printk("%s: cx23885 based dvb card\n", dev->name);
- videobuf_queue_sg_init(&port->dvb.dvbq, &dvb_qops, &dev->pci->dev, &port->slock,
+ err = -ENODEV;
+
+ /* dvb stuff */
+ /* We have to init the queue for each frontend on a port. */
+ printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name);
+ videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops,
+ &dev->pci->dev, &port->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP,
sizeof(struct cx23885_buffer), port);
+ }
err = dvb_register(port);
if (err != 0)
- printk("%s() dvb_register failed err = %d\n", __FUNCTION__, err);
+ printk(KERN_ERR "%s() dvb_register failed err = %d\n",
+ __func__, err);
return err;
}
int cx23885_dvb_unregister(struct cx23885_tsport *port)
{
- /* dvb */
- if(port->dvb.frontend)
- videobuf_dvb_unregister(&port->dvb);
+ struct videobuf_dvb_frontend *fe0;
+
+ /* FIXME: in an error condition where the we have
+ * an expected number of frontends (attach problem)
+ * then this might not clean up correctly, if 1
+ * is invalid.
+ * This comment only applies to future boards IF they
+ * implement MFE support.
+ */
+ fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
+ if (fe0->dvb.frontend)
+ videobuf_dvb_unregister_bus(&port->frontends);
+
+ switch (port->dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ netup_ci_exit(port);
+ break;
+ }
return 0;
}
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
-*/
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff