* Derived from ivtv-driver.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ * Copyright (C) 2008 Andy Walls <awalls@radix.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/pagemap.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <asm/byteorder.h>
#include <linux/dvb/video.h>
#include <linux/dvb/audio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
#include <media/tuner.h>
+#include <media/ir-kbd-i2c.h>
#include "cx18-mailbox.h"
#include "cx18-av-core.h"
#include "cx23418.h"
# error "This driver requires kernel PCI support."
#endif
-/* Default delay to throttle mmio access to the CX23418 */
-#define CX18_DEFAULT_MMIO_NDELAY 0 /* 0 ns = 0 PCI clock(s) / 33 MHz */
-
#define CX18_MEM_OFFSET 0x00000000
#define CX18_MEM_SIZE 0x04000000
#define CX18_REG_OFFSET 0x02000000
#define CX18_CARD_CNXT_RAPTOR_PAL 4 /* Conexant Raptor PAL */
#define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
#define CX18_CARD_LEADTEK_PVR2100 6 /* Leadtek WinFast PVR2100 */
-#define CX18_CARD_LAST 6
+#define CX18_CARD_LEADTEK_DVR3100H 7 /* Leadtek WinFast DVR3100 H */
+#define CX18_CARD_LAST 7
#define CX18_ENC_STREAM_TYPE_MPG 0
#define CX18_ENC_STREAM_TYPE_TS 1
#define CX18_DEFAULT_ENC_VBI_BUFFERS 1
#define CX18_DEFAULT_ENC_PCM_BUFFERS 1
+/* Maximum firmware DMA buffers per stream */
+#define CX18_MAX_FW_MDLS_PER_STREAM 63
+
+/* YUV buffer sizes in bytes to ensure integer # of frames per buffer */
+#define CX18_UNIT_ENC_YUV_BUFSIZE (720 * 32 * 3 / 2) /* bytes */
+#define CX18_625_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 576/32)
+#define CX18_525_LINE_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 480/32)
+
+/* IDX buffer size should be a multiple of the index entry size from the chip */
+struct cx18_enc_idx_entry {
+ __le32 length;
+ __le32 offset_low;
+ __le32 offset_high;
+ __le32 flags;
+ __le32 pts_low;
+ __le32 pts_high;
+} __attribute__ ((packed));
+#define CX18_UNIT_ENC_IDX_BUFSIZE \
+ (sizeof(struct cx18_enc_idx_entry) * V4L2_ENC_IDX_ENTRIES)
+
+/* DMA buffer, default size in kB allocated */
+#define CX18_DEFAULT_ENC_TS_BUFSIZE 32
+#define CX18_DEFAULT_ENC_MPG_BUFSIZE 32
+#define CX18_DEFAULT_ENC_IDX_BUFSIZE (CX18_UNIT_ENC_IDX_BUFSIZE * 1 / 1024 + 1)
+#define CX18_DEFAULT_ENC_YUV_BUFSIZE (CX18_UNIT_ENC_YUV_BUFSIZE * 3 / 1024 + 1)
+#define CX18_DEFAULT_ENC_PCM_BUFSIZE 4
+
/* i2c stuff */
#define I2C_CLIENTS_MAX 16
/* Flag to turn on high volume debugging */
#define CX18_DBGFLG_HIGHVOL (1 << 8)
-/* NOTE: extra space before comma in 'cx->num , ## args' is required for
+/* NOTE: extra space before comma in 'fmt , ## args' is required for
gcc-2.95, otherwise it won't compile. */
#define CX18_DEBUG(x, type, fmt, args...) \
do { \
if ((x) & cx18_debug) \
- printk(KERN_INFO "cx18-%d " type ": " fmt, cx->num , ## args); \
+ v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
} while (0)
#define CX18_DEBUG_WARN(fmt, args...) CX18_DEBUG(CX18_DBGFLG_WARN, "warning", fmt , ## args)
#define CX18_DEBUG_INFO(fmt, args...) CX18_DEBUG(CX18_DBGFLG_INFO, "info", fmt , ## args)
#define CX18_DEBUG_HIGH_VOL(x, type, fmt, args...) \
do { \
if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
- printk(KERN_INFO "cx18%d " type ": " fmt, cx->num , ## args); \
+ v4l2_info(&cx->v4l2_dev, " " type ": " fmt , ## args); \
} while (0)
#define CX18_DEBUG_HI_WARN(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_WARN, "warning", fmt , ## args)
#define CX18_DEBUG_HI_INFO(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_INFO, "info", fmt , ## args)
#define CX18_DEBUG_HI_IRQ(fmt, args...) CX18_DEBUG_HIGH_VOL(CX18_DBGFLG_IRQ, "irq", fmt , ## args)
/* Standard kernel messages */
-#define CX18_ERR(fmt, args...) printk(KERN_ERR "cx18-%d: " fmt, cx->num , ## args)
-#define CX18_WARN(fmt, args...) printk(KERN_WARNING "cx18-%d: " fmt, cx->num , ## args)
-#define CX18_INFO(fmt, args...) printk(KERN_INFO "cx18-%d: " fmt, cx->num , ## args)
-
-/* Values for CX18_API_DEC_PLAYBACK_SPEED mpeg_frame_type_mask parameter: */
-#define MPEG_FRAME_TYPE_IFRAME 1
-#define MPEG_FRAME_TYPE_IFRAME_PFRAME 3
-#define MPEG_FRAME_TYPE_ALL 7
+#define CX18_ERR(fmt, args...) v4l2_err(&cx->v4l2_dev, fmt , ## args)
+#define CX18_WARN(fmt, args...) v4l2_warn(&cx->v4l2_dev, fmt , ## args)
+#define CX18_INFO(fmt, args...) v4l2_info(&cx->v4l2_dev, fmt , ## args)
-#define CX18_MAX_PGM_INDEX (400)
+/* Messages for internal subdevs to use */
+#define CX18_DEBUG_DEV(x, dev, type, fmt, args...) \
+ do { \
+ if ((x) & cx18_debug) \
+ v4l2_info(dev, " " type ": " fmt , ## args); \
+ } while (0)
+#define CX18_DEBUG_WARN_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
+#define CX18_DEBUG_INFO_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
+#define CX18_DEBUG_API_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
+#define CX18_DEBUG_DMA_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
+#define CX18_DEBUG_IOCTL_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
+#define CX18_DEBUG_FILE_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
+#define CX18_DEBUG_I2C_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
+#define CX18_DEBUG_IRQ_DEV(dev, fmt, args...) \
+ CX18_DEBUG_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
+
+#define CX18_DEBUG_HIGH_VOL_DEV(x, dev, type, fmt, args...) \
+ do { \
+ if (((x) & cx18_debug) && (cx18_debug & CX18_DBGFLG_HIGHVOL)) \
+ v4l2_info(dev, " " type ": " fmt , ## args); \
+ } while (0)
+#define CX18_DEBUG_HI_WARN_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_WARN, dev, "warning", fmt , ## args)
+#define CX18_DEBUG_HI_INFO_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_INFO, dev, "info", fmt , ## args)
+#define CX18_DEBUG_HI_API_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_API, dev, "api", fmt , ## args)
+#define CX18_DEBUG_HI_DMA_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_DMA, dev, "dma", fmt , ## args)
+#define CX18_DEBUG_HI_IOCTL_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IOCTL, dev, "ioctl", fmt , ## args)
+#define CX18_DEBUG_HI_FILE_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_FILE, dev, "file", fmt , ## args)
+#define CX18_DEBUG_HI_I2C_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_I2C, dev, "i2c", fmt , ## args)
+#define CX18_DEBUG_HI_IRQ_DEV(dev, fmt, args...) \
+ CX18_DEBUG_HIGH_VOL_DEV(CX18_DBGFLG_IRQ, dev, "irq", fmt , ## args)
+
+#define CX18_ERR_DEV(dev, fmt, args...) v4l2_err(dev, fmt , ## args)
+#define CX18_WARN_DEV(dev, fmt, args...) v4l2_warn(dev, fmt , ## args)
+#define CX18_INFO_DEV(dev, fmt, args...) v4l2_info(dev, fmt , ## args)
-extern int cx18_retry_mmio; /* enable check & retry of mmio accesses */
extern int cx18_debug;
-
struct cx18_options {
int megabytes[CX18_MAX_STREAMS]; /* Size in megabytes of each stream */
int cardtype; /* force card type on load */
int tuner; /* set tuner on load */
int radio; /* enable/disable radio */
- unsigned long mmio_ndelay; /* delay in ns after every PCI mmio access */
};
-/* per-buffer bit flags */
-#define CX18_F_B_NEED_BUF_SWAP 0 /* this buffer should be byte swapped */
+/* per-mdl bit flags */
+#define CX18_F_M_NEED_SWAP 0 /* mdl buffer data must be endianess swapped */
/* per-stream, s_flags */
#define CX18_F_S_CLAIMED 3 /* this stream is claimed */
#define CX18_F_S_INTERNAL_USE 5 /* this stream is used internally (sliced VBI processing) */
#define CX18_F_S_STREAMOFF 7 /* signal end of stream EOS */
#define CX18_F_S_APPL_IO 8 /* this stream is used read/written by an application */
+#define CX18_F_S_STOPPING 9 /* telling the fw to stop capturing */
/* per-cx18, i_flags */
#define CX18_F_I_LOADED_FW 0 /* Loaded firmware 1st time */
#define CX18_F_I_EOS 4 /* End of encoder stream */
#define CX18_F_I_RADIO_USER 5 /* radio tuner is selected */
#define CX18_F_I_ENC_PAUSED 13 /* the encoder is paused */
-#define CX18_F_I_HAVE_WORK 15 /* there is work to be done */
-#define CX18_F_I_WORK_HANDLER_DVB 18 /* work to be done for DVB */
#define CX18_F_I_INITED 21 /* set after first open */
#define CX18_F_I_FAILED 22 /* set if first open failed */
#define CX18_SLICED_TYPE_WSS_625 (5)
#define CX18_SLICED_TYPE_VPS (7)
+/**
+ * list_entry_is_past_end - check if a previous loop cursor is off list end
+ * @pos: the type * previously used as a loop cursor.
+ * @head: the head for your list.
+ * @member: the name of the list_struct within the struct.
+ *
+ * Check if the entry's list_head is the head of the list, thus it's not a
+ * real entry but was the loop cursor that walked past the end
+ */
+#define list_entry_is_past_end(pos, head, member) \
+ (&pos->member == (head))
+
struct cx18_buffer {
struct list_head list;
dma_addr_t dma_handle;
- u32 id;
- unsigned long b_flags;
char *buf;
u32 bytesused;
u32 readpos;
};
+struct cx18_mdl {
+ struct list_head list;
+ u32 id; /* index into cx->scb->cpu_mdl[] of 1st cx18_mdl_ent */
+
+ unsigned int skipped;
+ unsigned long m_flags;
+
+ struct list_head buf_list;
+ struct cx18_buffer *curr_buf; /* current buffer in list for reading */
+
+ u32 bytesused;
+ u32 readpos;
+};
+
struct cx18_queue {
struct list_head list;
- atomic_t buffers;
+ atomic_t depth;
u32 bytesused;
+ spinlock_t lock;
};
struct cx18_dvb {
struct cx18; /* forward reference */
struct cx18_scb; /* forward reference */
+
+#define CX18_MAX_MDL_ACKS 2
+#define CX18_MAX_IN_WORK_ORDERS (CX18_MAX_FW_MDLS_PER_STREAM + 7)
+/* CPU_DE_RELEASE_MDL can burst CX18_MAX_FW_MDLS_PER_STREAM orders in a group */
+
+#define CX18_F_EWO_MB_STALE_UPON_RECEIPT 0x1
+#define CX18_F_EWO_MB_STALE_WHILE_PROC 0x2
+#define CX18_F_EWO_MB_STALE \
+ (CX18_F_EWO_MB_STALE_UPON_RECEIPT | CX18_F_EWO_MB_STALE_WHILE_PROC)
+
+struct cx18_in_work_order {
+ struct work_struct work;
+ atomic_t pending;
+ struct cx18 *cx;
+ unsigned long flags;
+ int rpu;
+ struct cx18_mailbox mb;
+ struct cx18_mdl_ack mdl_ack[CX18_MAX_MDL_ACKS];
+ char *str;
+};
+
#define CX18_INVALID_TASK_HANDLE 0xffffffff
struct cx18_stream {
/* These first four fields are always set, even if the stream
is not actually created. */
- struct video_device *v4l2dev; /* NULL when stream not created */
+ struct video_device *video_dev; /* NULL when stream not created */
struct cx18 *cx; /* for ease of use */
const char *name; /* name of the stream */
int type; /* stream type */
u32 handle; /* task handle */
- unsigned mdl_offset;
+ unsigned int mdl_base_idx;
u32 id;
- spinlock_t qlock; /* locks access to the queues */
unsigned long s_flags; /* status flags, see above */
int dma; /* can be PCI_DMA_TODEVICE,
PCI_DMA_FROMDEVICE or
PCI_DMA_NONE */
- u64 dma_pts;
wait_queue_head_t waitq;
- /* Buffer Stats */
- u32 buffers;
- u32 buf_size;
+ /* Buffers */
+ struct list_head buf_pool; /* buffers not attached to an MDL */
+ u32 buffers; /* total buffers owned by this stream */
+ u32 buf_size; /* size in bytes of a single buffer */
+
+ /* MDL sizes - all stream MDLs are the same size */
+ u32 bufs_per_mdl;
+ u32 mdl_size; /* total bytes in all buffers in a mdl */
- /* Buffer Queues */
- struct cx18_queue q_free; /* free buffers */
- struct cx18_queue q_full; /* full buffers */
- struct cx18_queue q_io; /* waiting for I/O */
+ /* MDL Queues */
+ struct cx18_queue q_free; /* free - in rotation, not committed */
+ struct cx18_queue q_busy; /* busy - in use by firmware */
+ struct cx18_queue q_full; /* full - data for user apps */
+ struct cx18_queue q_idle; /* idle - not in rotation */
+
+ struct work_struct out_work_order;
/* DVB / Digital Transport */
struct cx18_dvb dvb;
/* forward declaration of struct defined in cx18-cards.h */
struct cx18_card;
+/*
+ * A note about "sliced" VBI data as implemented in this driver:
+ *
+ * Currently we collect the sliced VBI in the form of Ancillary Data
+ * packets, inserted by the AV core decoder/digitizer/slicer in the
+ * horizontal blanking region of the VBI lines, in "raw" mode as far as
+ * the Encoder is concerned. We don't ever tell the Encoder itself
+ * to provide sliced VBI. (AV Core: sliced mode - Encoder: raw mode)
+ *
+ * We then process the ancillary data ourselves to send the sliced data
+ * to the user application directly or build up MPEG-2 private stream 1
+ * packets to splice into (only!) MPEG-2 PS streams for the user app.
+ *
+ * (That's how ivtv essentially does it.)
+ *
+ * The Encoder should be able to extract certain sliced VBI data for
+ * us and provide it in a separate stream or splice it into any type of
+ * MPEG PS or TS stream, but this isn't implemented yet.
+ */
+
+/*
+ * Number of "raw" VBI samples per horizontal line we tell the Encoder to
+ * grab from the decoder/digitizer/slicer output for raw or sliced VBI.
+ * It depends on the pixel clock and the horiz rate:
+ *
+ * (1/Fh)*(2*Fp) = Samples/line
+ * = 4 bytes EAV + Anc data in hblank + 4 bytes SAV + active samples
+ *
+ * Sliced VBI data is sent as ancillary data during horizontal blanking
+ * Raw VBI is sent as active video samples during vertcal blanking
+ *
+ * We use a BT.656 pxiel clock of 13.5 MHz and a BT.656 active line
+ * length of 720 pixels @ 4:2:2 sampling. Thus...
+ *
+ * For systems that use a 15.734 kHz horizontal rate, such as
+ * NTSC-M, PAL-M, PAL-60, and other 60 Hz/525 line systems, we have:
+ *
+ * (1/15.734 kHz) * 2 * 13.5 MHz = 1716 samples/line =
+ * 4 bytes SAV + 268 bytes anc data + 4 bytes SAV + 1440 active samples
+ *
+ * For systems that use a 15.625 kHz horizontal rate, such as
+ * PAL-B/G/H, PAL-I, SECAM-L and other 50 Hz/625 line systems, we have:
+ *
+ * (1/15.625 kHz) * 2 * 13.5 MHz = 1728 samples/line =
+ * 4 bytes SAV + 280 bytes anc data + 4 bytes SAV + 1440 active samples
+ */
+static const u32 vbi_active_samples = 1444; /* 4 byte SAV + 720 Y + 720 U/V */
+static const u32 vbi_hblank_samples_60Hz = 272; /* 4 byte EAV + 268 anc/fill */
+static const u32 vbi_hblank_samples_50Hz = 284; /* 4 byte EAV + 280 anc/fill */
#define CX18_VBI_FRAMES 32
-/* VBI data */
struct vbi_info {
- u32 enc_size;
- u32 frame;
- u8 cc_data_odd[256];
- u8 cc_data_even[256];
- int cc_pos;
- u8 cc_no_update;
- u8 vps[5];
- u8 vps_found;
- int wss;
- u8 wss_found;
- u8 wss_no_update;
- u32 raw_decoder_line_size;
- u8 raw_decoder_sav_odd_field;
- u8 raw_decoder_sav_even_field;
- u32 sliced_decoder_line_size;
- u8 sliced_decoder_sav_odd_field;
- u8 sliced_decoder_sav_even_field;
+ /* Current state of v4l2 VBI settings for this device */
struct v4l2_format in;
- /* convenience pointer to sliced struct in vbi_in union */
- struct v4l2_sliced_vbi_format *sliced_in;
- u32 service_set_in;
- int insert_mpeg;
+ struct v4l2_sliced_vbi_format *sliced_in; /* pointer to in.fmt.sliced */
+ u32 count; /* Count of VBI data lines: 60 Hz: 12 or 50 Hz: 18 */
+ u32 start[2]; /* First VBI data line per field: 10 & 273 or 6 & 318 */
- /* Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines.
- One for /dev/vbi0 and one for /dev/vbi8 */
- struct v4l2_sliced_vbi_data sliced_data[36];
+ u32 frame; /* Count of VBI buffers/frames received from Encoder */
- /* Buffer for VBI data inserted into MPEG stream.
- The first byte is a dummy byte that's never used.
- The next 16 bytes contain the MPEG header for the VBI data,
- the remainder is the actual VBI data.
- The max size accepted by the MPEG VBI reinsertion turns out
- to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes,
- where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is
- a single line header byte and 2 * 18 is the number of VBI lines per frame.
+ /*
+ * Vars for creation and insertion of MPEG Private Stream 1 packets
+ * of sliced VBI data into an MPEG PS
+ */
- However, it seems that the data must be 1K aligned, so we have to
- pad the data until the 1 or 2 K boundary.
+ /* Boolean: create and insert Private Stream 1 packets into the PS */
+ int insert_mpeg;
- This pointer array will allocate 2049 bytes to store each VBI frame. */
+ /*
+ * Buffer for the maximum of 2 * 18 * packet_size sliced VBI lines.
+ * Used in cx18-vbi.c only for collecting sliced data, and as a source
+ * during conversion of sliced VBI data into MPEG Priv Stream 1 packets.
+ * We don't need to save state here, but the array may have been a bit
+ * too big (2304 bytes) to alloc from the stack.
+ */
+ struct v4l2_sliced_vbi_data sliced_data[36];
+
+ /*
+ * A ring buffer of driver-generated MPEG-2 PS
+ * Program Pack/Private Stream 1 packets for sliced VBI data insertion
+ * into the MPEG PS stream.
+ *
+ * In each sliced_mpeg_data[] buffer is:
+ * 16 byte MPEG-2 PS Program Pack Header
+ * 16 byte MPEG-2 Private Stream 1 PES Header
+ * 4 byte magic number: "itv0" or "ITV0"
+ * 4 byte first field line mask, if "itv0"
+ * 4 byte second field line mask, if "itv0"
+ * 36 lines, if "ITV0"; or <36 lines, if "itv0"; of sliced VBI data
+ *
+ * Each line in the payload is
+ * 1 byte line header derived from the SDID (WSS, CC, VPS, etc.)
+ * 42 bytes of line data
+ *
+ * That's a maximum 1552 bytes of payload in the Private Stream 1 packet
+ * which is the payload size a PVR-350 (CX23415) MPEG decoder will
+ * accept for VBI data. So, including the headers, it's a maximum 1584
+ * bytes total.
+ */
+#define CX18_SLICED_MPEG_DATA_MAXSZ 1584
+ /* copy_vbi_buf() needs 8 temp bytes on the end for the worst case */
+#define CX18_SLICED_MPEG_DATA_BUFSZ (CX18_SLICED_MPEG_DATA_MAXSZ+8)
u8 *sliced_mpeg_data[CX18_VBI_FRAMES];
u32 sliced_mpeg_size[CX18_VBI_FRAMES];
- struct cx18_buffer sliced_mpeg_buf;
+
+ /* Count of Program Pack/Program Stream 1 packets inserted into PS */
u32 inserted_frame;
- u32 start[2], count;
- u32 raw_size;
- u32 sliced_size;
+ /*
+ * A dummy driver stream transfer mdl & buffer with a copy of the next
+ * sliced_mpeg_data[] buffer for output to userland apps.
+ * Only used in cx18-fileops.c, but its state needs to persist at times.
+ */
+ struct cx18_mdl sliced_mpeg_mdl;
+ struct cx18_buffer sliced_mpeg_buf;
};
/* Per cx23418, per I2C bus private algo callback data */
};
#define CX18_MAX_MMIO_WR_RETRIES 10
-#define CX18_MAX_MMIO_RD_RETRIES 2
-
-struct cx18_mmio_stats {
- atomic_t retried_write[CX18_MAX_MMIO_WR_RETRIES+1];
- atomic_t retried_read[CX18_MAX_MMIO_RD_RETRIES+1];
-};
/* Struct to hold info about cx18 cards */
struct cx18 {
- int num; /* board number, -1 during init! */
- char name[8]; /* board name for printk and interrupts (e.g. 'cx180') */
- struct pci_dev *dev; /* PCI device */
+ int instance;
+ struct pci_dev *pci_dev;
+ struct v4l2_device v4l2_dev;
+ struct v4l2_subdev *sd_av; /* A/V decoder/digitizer sub-device */
+ struct v4l2_subdev *sd_extmux; /* External multiplexer sub-dev */
+
const struct cx18_card *card; /* card information */
const char *card_name; /* full name of the card */
const struct cx18_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
u8 is_50hz;
u8 is_60hz;
- u8 is_out_50hz;
- u8 is_out_60hz;
u8 nof_inputs; /* number of video inputs */
u8 nof_audio_inputs; /* number of audio inputs */
- u16 buffer_id; /* buffer ID counter */
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* Hardware description of the board */
- unsigned mdl_offset;
+ unsigned int free_mdl_idx;
struct cx18_scb __iomem *scb; /* pointer to SCB */
struct mutex epu2apu_mb_lock; /* protect driver to chip mailbox in SCB*/
struct mutex epu2cpu_mb_lock; /* protect driver to chip mailbox in SCB*/
-
struct cx18_av_state av_state;
/* codec settings */
/* dualwatch */
unsigned long dualwatch_jiffies;
- u16 dualwatch_stereo_mode;
-
- /* Digitizer type */
- int digitizer; /* 0x00EF = saa7114 0x00FO = saa7115 0x0106 = mic */
+ u32 dualwatch_stereo_mode;
struct mutex serialize_lock; /* mutex used to serialize open/close/start/stop/ioctl operations */
struct cx18_options options; /* User options */
+ int stream_buffers[CX18_MAX_STREAMS]; /* # of buffers for each stream */
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
+ struct snd_cx18_card *alsa; /* ALSA interface for PCM capture stream */
+ void (*pcm_announce_callback)(struct snd_cx18_card *card, u8 *pcm_data,
+ size_t num_bytes);
+
unsigned long i_flags; /* global cx18 flags */
atomic_t ana_capturing; /* count number of active analog capture streams */
atomic_t tot_capturing; /* total count number of active capture streams */
- spinlock_t lock; /* lock access to this struct */
int search_pack_header;
int open_id; /* incremented each time an open occurs, used as
struct vbi_info vbi;
- u32 pgm_info_offset;
- u32 pgm_info_num;
- u32 pgm_info_write_idx;
- u32 pgm_info_read_idx;
- struct v4l2_enc_idx_entry pgm_info[CX18_MAX_PGM_INDEX];
-
u64 mpg_data_received;
u64 vbi_data_inserted;
/* when the current DMA is finished this queue is woken up */
wait_queue_head_t dma_waitq;
- struct work_struct work;
+ u32 sw1_irq_mask;
+ u32 sw2_irq_mask;
+ u32 hw2_irq_mask;
+
+ struct workqueue_struct *in_work_queue;
+ char in_workq_name[11]; /* "cx18-NN-in" */
+ struct cx18_in_work_order in_work_order[CX18_MAX_IN_WORK_ORDERS];
+ char epu_debug_str[256]; /* CX18_EPU_DEBUG is rare: use shared space */
+
+ struct workqueue_struct *out_work_queue;
+ char out_workq_name[12]; /* "cx18-NN-out" */
/* i2c */
struct i2c_adapter i2c_adap[2];
struct i2c_algo_bit_data i2c_algo[2];
struct cx18_i2c_algo_callback_data i2c_algo_cb_data[2];
- struct i2c_client i2c_client[2];
- struct mutex i2c_bus_lock[2];
- struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
+
+ struct IR_i2c_init_data ir_i2c_init_data;
/* gpio */
u32 gpio_dir;
u32 gpio_val;
struct mutex gpio_lock;
-
- /* Statistics */
- struct cx18_mmio_stats mmio_stats;
+ struct v4l2_subdev sd_gpiomux;
+ struct v4l2_subdev sd_resetctrl;
/* v4l2 and User settings */
/* codec settings */
u32 audio_input;
u32 active_input;
- u32 active_output;
v4l2_std_id std;
v4l2_std_id tuner_std; /* The norm of the tuner (fixed) */
+
+ /* Used for cx18-alsa module loading */
+ struct work_struct request_module_wk;
};
+static inline struct cx18 *to_cx18(struct v4l2_device *v4l2_dev)
+{
+ return container_of(v4l2_dev, struct cx18, v4l2_dev);
+}
+
+/* cx18 extensions to be loaded */
+extern int (*cx18_ext_init)(struct cx18 *);
+
/* Globals */
-extern struct cx18 *cx18_cards[];
-extern int cx18_cards_active;
extern int cx18_first_minor;
-extern spinlock_t cx18_cards_lock;
/*==============Prototypes==================*/
/* First-open initialization: load firmware, etc. */
int cx18_init_on_first_open(struct cx18 *cx);
+/* Test if the current VBI mode is raw (1) or sliced (0) */
+static inline int cx18_raw_vbi(const struct cx18 *cx)
+{
+ return cx->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
+}
+
+/* Call the specified callback for all subdevs with a grp_id bit matching the
+ * mask in hw (if 0, then match them all). Ignore any errors. */
+#define cx18_call_hw(cx, hw, o, f, args...) \
+ __v4l2_device_call_subdevs(&(cx)->v4l2_dev, \
+ !(hw) || (sd->grp_id & (hw)), o, f , ##args)
+
+#define cx18_call_all(cx, o, f, args...) cx18_call_hw(cx, 0, o, f , ##args)
+
+/* Call the specified callback for all subdevs with a grp_id bit matching the
+ * mask in hw (if 0, then match them all). If the callback returns an error
+ * other than 0 or -ENOIOCTLCMD, then return with that error code. */
+#define cx18_call_hw_err(cx, hw, o, f, args...) \
+ __v4l2_device_call_subdevs_until_err( \
+ &(cx)->v4l2_dev, !(hw) || (sd->grp_id & (hw)), o, f , ##args)
+
+#define cx18_call_all_err(cx, o, f, args...) \
+ cx18_call_hw_err(cx, 0, o, f , ##args)
+
#endif /* CX18_DRIVER_H */
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff