* Derived from cx25840-core.h
*
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
+ * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
#ifndef _CX18_AV_CORE_H_
#define _CX18_AV_CORE_H_
+#include <media/v4l2-device.h>
+
struct cx18;
enum cx18_av_video_input {
CX18_AV_SVIDEO2 = 0x620,
CX18_AV_SVIDEO3 = 0x730,
CX18_AV_SVIDEO4 = 0x840,
+
+ /* Component Video inputs consist of one luma input (In1-In8) ORed
+ with a red chroma (In4-In6) and blue chroma input (In7-In8) */
+ CX18_AV_COMPONENT_LUMA1 = 0x1000,
+ CX18_AV_COMPONENT_LUMA2 = 0x2000,
+ CX18_AV_COMPONENT_LUMA3 = 0x3000,
+ CX18_AV_COMPONENT_LUMA4 = 0x4000,
+ CX18_AV_COMPONENT_LUMA5 = 0x5000,
+ CX18_AV_COMPONENT_LUMA6 = 0x6000,
+ CX18_AV_COMPONENT_LUMA7 = 0x7000,
+ CX18_AV_COMPONENT_LUMA8 = 0x8000,
+ CX18_AV_COMPONENT_R_CHROMA4 = 0x40000,
+ CX18_AV_COMPONENT_R_CHROMA5 = 0x50000,
+ CX18_AV_COMPONENT_R_CHROMA6 = 0x60000,
+ CX18_AV_COMPONENT_B_CHROMA7 = 0x700000,
+ CX18_AV_COMPONENT_B_CHROMA8 = 0x800000,
+
+ /* Component Video aliases for common combinations */
+ CX18_AV_COMPONENT1 = 0x861000,
};
enum cx18_av_audio_input {
/* Audio inputs: serial or In4-In8 */
- CX18_AV_AUDIO_SERIAL,
+ CX18_AV_AUDIO_SERIAL1,
+ CX18_AV_AUDIO_SERIAL2,
CX18_AV_AUDIO4 = 4,
CX18_AV_AUDIO5,
CX18_AV_AUDIO6,
};
struct cx18_av_state {
+ struct v4l2_subdev sd;
int radio;
v4l2_std_id std;
enum cx18_av_video_input vid_input;
enum cx18_av_audio_input aud_input;
u32 audclk_freq;
int audmode;
- int vbi_line_offset;
+ int default_volume;
u32 id;
u32 rev;
int is_initialized;
+
+ /*
+ * The VBI slicer starts operating and counting lines, begining at
+ * slicer line count of 1, at D lines after the deassertion of VRESET.
+ * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525
+ * line systems respectively. Sliced ancillary data captured on VBI
+ * slicer line M is inserted after the VBI slicer is done with line M,
+ * when VBI slicer line count is N = M+1. Thus when the VBI slicer
+ * reports a VBI slicer line number with ancillary data, the IDID0 byte
+ * indicates VBI slicer line N. The actual field line that the captured
+ * data comes from is
+ *
+ * L = M+(S+D-1) = N-1+(S+D-1) = N + (S+D-2).
+ *
+ * L is the line in the field, not frame, from which the VBI data came.
+ * N is the line reported by the slicer in the ancillary data.
+ * D is the slicer_line_delay value programmed into register 0x47f.
+ * S is 6 for 625 line systems or 10 for 525 line systems
+ * (S+D-2) is the slicer_line_offset used to convert slicer reported
+ * line counts to actual field lines.
+ */
+ int slicer_line_delay;
+ int slicer_line_offset;
};
#define CXADEC_QAM_CONST_DEC 0x924
#define CXADEC_QAM_ROTATOR_FREQ 0x948
-/* Bit defintions / settings used in Mako Audio */
+/* Bit definitions / settings used in Mako Audio */
#define CXADEC_PREF_MODE_MONO_LANGA 0
#define CXADEC_PREF_MODE_MONO_LANGB 1
#define CXADEC_PREF_MODE_MONO_LANGC 2
#define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */
#define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */
+static inline struct cx18_av_state *to_cx18_av_state(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct cx18_av_state, sd);
+}
+
/* ----------------------------------------------------------------------- */
/* cx18_av-core.c */
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value);
int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value);
+int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask);
+int cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval,
+ u32 mask);
u8 cx18_av_read(struct cx18 *cx, u16 addr);
u32 cx18_av_read4(struct cx18 *cx, u16 addr);
int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value);
int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value);
-int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg);
+void cx18_av_std_setup(struct cx18 *cx);
+
+int cx18_av_probe(struct cx18 *cx);
/* ----------------------------------------------------------------------- */
/* cx18_av-firmware.c */
/* ----------------------------------------------------------------------- */
/* cx18_av-audio.c */
-int cx18_av_audio(struct cx18 *cx, unsigned int cmd, void *arg);
+int cx18_av_audio_g_ctrl(struct cx18 *cx, struct v4l2_control *ctrl);
+int cx18_av_audio_s_ctrl(struct cx18 *cx, struct v4l2_control *ctrl);
+int cx18_av_s_clock_freq(struct v4l2_subdev *sd, u32 freq);
void cx18_av_audio_set_path(struct cx18 *cx);
/* ----------------------------------------------------------------------- */
/* cx18_av-vbi.c */
-void cx18_av_vbi_setup(struct cx18 *cx);
-int cx18_av_vbi(struct cx18 *cx, unsigned int cmd, void *arg);
+int cx18_av_decode_vbi_line(struct v4l2_subdev *sd,
+ struct v4l2_decode_vbi_line *vbi);
+int cx18_av_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt);
+int cx18_av_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
+int cx18_av_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt);
#endif
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff