#include <linux/init.h>
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include "bttvp.h"
static int radio_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 };
static int vbi_nr[BTTV_MAX] = { [0 ... (BTTV_MAX-1)] = -1 };
static int debug_latency;
+static int disable_ir;
static unsigned int fdsr;
module_param(bttv_debug, int, 0644);
module_param(irq_debug, int, 0644);
module_param(debug_latency, int, 0644);
+module_param(disable_ir, int, 0444);
module_param(fdsr, int, 0444);
module_param(gbuffers, int, 0444);
MODULE_PARM_DESC(bttv_gpio,"log gpio changes, default is 0 (no)");
MODULE_PARM_DESC(bttv_debug,"debug messages, default is 0 (no)");
MODULE_PARM_DESC(irq_debug,"irq handler debug messages, default is 0 (no)");
+MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
MODULE_PARM_DESC(gbuffers,"number of capture buffers. range 2-32, default 8");
MODULE_PARM_DESC(gbufsize,"size of the capture buffers, default is 0x208000");
MODULE_PARM_DESC(reset_crop,"reset cropping parameters at open(), default "
tvnorm = &bttv_tvnorms[norm];
- if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap,
+ if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap,
sizeof (tvnorm->cropcap))) {
bttv_crop_reset(&btv->crop[0], norm);
btv->crop[1] = btv->crop[0]; /* current = default */
*size = fh->fmt->depth*fh->width*fh->height >> 3;
if (0 == *count)
*count = gbuffers;
- while (*size * *count > gbuffers * gbufsize)
- (*count)--;
+ if (*size * *count > gbuffers * gbufsize)
+ *count = (gbuffers * gbufsize) / *size;
return 0;
}
{
struct bttv_fh *fh = priv;
struct bttv *btv = fh->btv;
- int err;
-
- err = v4l2_prio_check(&btv->prio, &fh->prio);
- if (0 != err)
- return err;
f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
f->frequency = btv->freq;
V4L2_CAP_VBI_CAPTURE |
V4L2_CAP_READWRITE |
V4L2_CAP_STREAMING;
+ if (btv->has_saa6588)
+ cap->capabilities |= V4L2_CAP_RDS_CAPTURE;
if (no_overlay <= 0)
cap->capabilities |= V4L2_CAP_VIDEO_OVERLAY;
static int bttv_open(struct file *file)
{
- int minor = video_devdata(file)->minor;
+ struct video_device *vdev = video_devdata(file);
struct bttv *btv = video_drvdata(file);
struct bttv_fh *fh;
enum v4l2_buf_type type = 0;
- dprintk(KERN_DEBUG "bttv: open minor=%d\n",minor);
+ dprintk(KERN_DEBUG "bttv: open dev=%s\n", video_device_node_name(vdev));
- lock_kernel();
- if (btv->video_dev->minor == minor) {
+ if (vdev->vfl_type == VFL_TYPE_GRABBER) {
type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
- } else if (btv->vbi_dev->minor == minor) {
+ } else if (vdev->vfl_type == VFL_TYPE_VBI) {
type = V4L2_BUF_TYPE_VBI_CAPTURE;
} else {
WARN_ON(1);
- unlock_kernel();
return -ENODEV;
}
+ lock_kernel();
+
dprintk(KERN_DEBUG "bttv%d: open called (type=%s)\n",
btv->c.nr,v4l2_type_names[type]);
static struct video_device bttv_video_template = {
.fops = &bttv_fops,
- .minor = -1,
.ioctl_ops = &bttv_ioctl_ops,
.tvnorms = BTTV_NORMS,
.current_norm = V4L2_STD_PAL,
static int radio_open(struct file *file)
{
- int minor = video_devdata(file)->minor;
+ struct video_device *vdev = video_devdata(file);
struct bttv *btv = video_drvdata(file);
struct bttv_fh *fh;
- dprintk("bttv: open minor=%d\n",minor);
+ dprintk("bttv: open dev=%s\n", video_device_node_name(vdev));
lock_kernel();
- WARN_ON(btv->radio_dev && btv->radio_dev->minor != minor);
- if (!btv->radio_dev || btv->radio_dev->minor != minor) {
- unlock_kernel();
- return -ENODEV;
- }
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
static struct video_device radio_template = {
.fops = &radio_fops,
- .minor = -1,
.ioctl_ops = &radio_ioctl_ops,
};
if (!V4L2_FIELD_HAS_BOTH(item->vb.field) &&
(item->vb.queue.next != &btv->capture)) {
item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue);
+ /* Mike Isely <isely@pobox.com> - Only check
+ * and set up the bottom field in the logic
+ * below. Don't ever do the top field. This
+ * of course means that if we set up the
+ * bottom field in the above code that we'll
+ * actually skip a field. But that's OK.
+ * Having processed only a single buffer this
+ * time, then the next time around the first
+ * available buffer should be for a top field.
+ * That will then cause us here to set up a
+ * top then a bottom field in the normal way.
+ * The alternative to this understanding is
+ * that we set up the second available buffer
+ * as a top field, but that's out of order
+ * since this driver always processes the top
+ * field first - the effect will be the two
+ * buffers being returned in the wrong order,
+ * with the second buffer also being delayed
+ * by one field time (owing to the fifo nature
+ * of videobuf). Worse still, we'll be stuck
+ * doing fields out of order now every time
+ * until something else causes a field to be
+ * dropped. By effectively forcing a field to
+ * drop this way then we always get back into
+ * sync within a single frame time. (Out of
+ * order fields can screw up deinterlacing
+ * algorithms.) */
if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) {
- if (NULL == set->top &&
- V4L2_FIELD_TOP == item->vb.field) {
- set->top = item;
- }
if (NULL == set->bottom &&
V4L2_FIELD_BOTTOM == item->vb.field) {
set->bottom = item;
static void bttv_unregister_video(struct bttv *btv)
{
if (btv->video_dev) {
- if (-1 != btv->video_dev->minor)
+ if (video_is_registered(btv->video_dev))
video_unregister_device(btv->video_dev);
else
video_device_release(btv->video_dev);
btv->video_dev = NULL;
}
if (btv->vbi_dev) {
- if (-1 != btv->vbi_dev->minor)
+ if (video_is_registered(btv->vbi_dev))
video_unregister_device(btv->vbi_dev);
else
video_device_release(btv->vbi_dev);
btv->vbi_dev = NULL;
}
if (btv->radio_dev) {
- if (-1 != btv->radio_dev->minor)
+ if (video_is_registered(btv->radio_dev))
video_unregister_device(btv->radio_dev);
else
video_device_release(btv->radio_dev);
if (video_register_device(btv->video_dev, VFL_TYPE_GRABBER,
video_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device video%d\n",
- btv->c.nr, btv->video_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->video_dev));
if (device_create_file(&btv->video_dev->dev,
&dev_attr_card)<0) {
printk(KERN_ERR "bttv%d: device_create_file 'card' "
if (video_register_device(btv->vbi_dev, VFL_TYPE_VBI,
vbi_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device vbi%d\n",
- btv->c.nr, btv->vbi_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->vbi_dev));
if (!btv->has_radio)
return 0;
if (video_register_device(btv->radio_dev, VFL_TYPE_RADIO,
radio_nr[btv->c.nr]) < 0)
goto err;
- printk(KERN_INFO "bttv%d: registered device radio%d\n",
- btv->c.nr, btv->radio_dev->num);
+ printk(KERN_INFO "bttv%d: registered device %s\n",
+ btv->c.nr, video_device_node_name(btv->radio_dev));
/* all done */
return 0;
/* some card-specific stuff (needs working i2c) */
bttv_init_card2(btv);
+ bttv_init_tuner(btv);
init_irqreg(btv);
/* register video4linux + input */
request_modules(btv);
}
- bttv_input_init(btv);
+ if (!disable_ir) {
+ init_bttv_i2c_ir(btv);
+ bttv_input_init(btv);
+ }
/* everything is fine */
bttv_num++;
#endif
static struct pci_device_id bttv_pci_tbl[] = {
- {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT848,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT849,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT878,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {PCI_VENDOR_ID_BROOKTREE, PCI_DEVICE_ID_BT879,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT848), 0},
+ {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT849), 0},
+ {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT878), 0},
+ {PCI_VDEVICE(BROOKTREE, PCI_DEVICE_ID_BT879), 0},
{0,}
};
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff