#
+# Generic video config states
+#
+
+config VIDEO_V4L2
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON
+ default VIDEO_DEV && VIDEO_V4L2_COMMON
+
+config VIDEO_V4L1
+ tristate
+ depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+ default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
+
+config VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_SG
+ depends on HAS_DMA
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_VMALLOC
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DMA_CONTIG
+ depends on HAS_DMA
+ select VIDEOBUF_GEN
+ tristate
+
+config VIDEOBUF_DVB
+ tristate
+ select VIDEOBUF_GEN
+
+config VIDEO_BTCX
+ depends on PCI
+ tristate
+
+config VIDEO_TVEEPROM
+ tristate
+ depends on I2C
+
+config VIDEO_TUNER
+ tristate
+ depends on MEDIA_TUNER
+
+#
# Multimedia Video device configuration
#
menuconfig VIDEO_CAPTURE_DRIVERS
bool "Video capture adapters"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L2
default y
---help---
Say Y here to enable selecting the video adapters for
webcams, analog TV, and hybrid analog/digital TV.
Some of those devices also supports FM radio.
-if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
+if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
V4L devices.
In doubt, say N.
+config VIDEO_FIXED_MINOR_RANGES
+ bool "Enable old-style fixed minor ranges for video devices"
+ default n
+ ---help---
+ Say Y here to enable the old-style fixed-range minor assignments.
+ Only useful if you rely on the old behavior and use mknod instead of udev.
+
+ When in doubt, say N.
+
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
default y
In doubt, say Y.
+config VIDEO_IR_I2C
+ tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
+ depends on I2C && VIDEO_IR
+ default y
+ ---help---
+ Most boards have an IR chip directly connected via GPIO. However,
+ some video boards have the IR connected via I2C bus.
+
+ If your board doesn't have an I2C IR chip, you may disable this
+ option.
+
+ In doubt, say Y.
+
#
# Encoder / Decoder module configuration
#
To compile this driver as a module, choose M here: the
module will be called msp3400.
+config VIDEO_CS5345
+ tristate "Cirrus Logic CS5345 audio ADC"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Cirrus Logic CS5345 24-bit, 192 kHz
+ stereo A/D converter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cs5345.
+
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
module will be called cs53l32a.
config VIDEO_M52790
- tristate "Mitsubishi M52790 A/V switch"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
- ---help---
+ tristate "Mitsubishi M52790 A/V switch"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
config VIDEO_VP27SMPX
tristate "Panasonic VP27s internal MPX"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
module will be called vp27smpx.
+comment "RDS decoders"
+
+config VIDEO_SAA6588
+ tristate "SAA6588 Radio Chip RDS decoder support"
+ depends on VIDEO_V4L2 && I2C
+
+ help
+ Support for this Radio Data System (RDS) decoder. This allows
+ seeing radio station identification transmitted using this
+ standard.
+
+ To compile this driver as a module, choose M here: the
+ module will be called saa6588.
+
comment "Video decoders"
+config VIDEO_ADV7180
+ tristate "Analog Devices ADV7180 decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Analog Devices ADV7180 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7180.
+
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT819A video decoder.
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT856 video decoder.
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for BT866 video decoder.
config VIDEO_KS0127
tristate "KS0127 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for KS0127 video decoder.
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
+config VIDEO_MT9V011
+ tristate "Micron mt9v011 sensor support"
+ depends on I2C && VIDEO_V4L2
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the Micron
+ mt0v011 1.3 Mpixel camera. It currently only works with the
+ em28xx driver.
+
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7110.
-config VIDEO_SAA7111
- tristate "Philips SAA7111 video decoder"
- depends on VIDEO_V4L1 && I2C
- ---help---
- Support for the Philips SAA711 video decoder.
-
- To compile this driver as a module, choose M here: the
- module will be called saa7111.
-
-config VIDEO_SAA7114
- tristate "Philips SAA7114 video decoder"
- depends on VIDEO_V4L1 && I2C
+config VIDEO_SAA711X
+ tristate "Philips SAA7111/3/4/5 video decoders"
+ depends on VIDEO_V4L2 && I2C
---help---
- Support for the Philips SAA7114 video decoder. This driver
- is used only on Zoran driver and should be moved soon to
- SAA711x module.
+ Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose M here: the
- module will be called saa7114.
+ module will be called saa7115.
-config VIDEO_SAA711X
- tristate "Philips SAA7113/4/5 video decoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+config VIDEO_SAA717X
+ tristate "Philips SAA7171/3/4 audio/video decoders"
+ depends on VIDEO_V4L2 && I2C
---help---
- Support for the Philips SAA7113/4/5 video decoders.
+ Support for the Philips SAA7171/3/4 audio/video decoders.
To compile this driver as a module, choose M here: the
- module will be called saa7115.
+ module will be called saa717x.
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7191 video decoder.
To compile this driver as a module, choose M here: the
module will be called saa7191.
+config VIDEO_TVP514X
+ tristate "Texas Instruments TVP514x video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
+ decoder. It is currently working with the TI OMAP3 camera
+ controller.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp514x.
+
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
To compile this driver as a module, choose M here: the
module will be called tvp5150.
+config VIDEO_TVP7002
+ tristate "Texas Instruments TVP7002 video decoder"
+ depends on VIDEO_V4L2 && I2C
+ ---help---
+ Support for the Texas Instruments TVP7002 video decoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tvp7002.
+
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for VPX322x video decoders.
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
- depends on VIDEO_V4L2 && EXPERIMENTAL
+ depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7127/9 digital video encoders.
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7185 video encoder.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7170 video encoder driver
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
- depends on VIDEO_V4L1 && I2C
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7175.
+config VIDEO_THS7303
+ tristate "THS7303 Video Amplifier"
+ depends on I2C
+ help
+ Support for TI THS7303 video amplifier
+
+ To compile this driver as a module, choose M here: the
+ module will be called ths7303.
+
+config VIDEO_ADV7343
+ tristate "ADV7343 video encoder"
+ depends on I2C
+ help
+ Support for Analog Devices I2C bus based ADV7343 encoder.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adv7343.
+
+config VIDEO_AK881X
+ tristate "AK8813/AK8814 video encoders"
+ depends on I2C
+ help
+ Video output driver for AKM AK8813 and AK8814 TV encoders
+
comment "Video improvement chips"
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
- depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
endmenu # encoder / decoder chips
+config DISPLAY_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Display"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ select VIDEO_ADV7343
+ select VIDEO_THS7303
+ help
+ Support for DM6467 based display device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_display.
+
+config VIDEO_SH_VOU
+ tristate "SuperH VOU video output driver"
+ depends on VIDEO_DEV && ARCH_SHMOBILE
+ select VIDEOBUF_DMA_CONTIG
+ help
+ Support for the Video Output Unit (VOU) on SuperH SoCs.
+
+config CAPTURE_DAVINCI_DM646X_EVM
+ tristate "DM646x EVM Video Capture"
+ depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
+ select VIDEOBUF_DMA_CONTIG
+ select VIDEO_DAVINCI_VPIF
+ help
+ Support for DM6467 based capture device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif_capture.
+
+config VIDEO_DAVINCI_VPIF
+ tristate "DaVinci VPIF Driver"
+ depends on DISPLAY_DAVINCI_DM646X_EVM
+ help
+ Support for DaVinci VPIF Driver.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpif.
+
config VIDEO_VIVI
tristate "Virtual Video Driver"
- depends on VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+ select FONT_8x16
select VIDEOBUF_VMALLOC
default n
---help---
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
-source "drivers/media/video/bt8xx/Kconfig"
-
-config VIDEO_SAA6588
- tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
- depends on I2C && VIDEO_BT848
+config VIDEO_VPSS_SYSTEM
+ tristate "VPSS System module driver"
+ depends on ARCH_DAVINCI
+ help
+ Support for vpss system module for video driver
+config VIDEO_VPFE_CAPTURE
+ tristate "VPFE Video Capture Driver"
+ depends on VIDEO_V4L2 && ARCH_DAVINCI
+ select VIDEOBUF_DMA_CONTIG
help
- Support for Radio Data System (RDS) decoder. This allows seeing
- radio station identification transmitted using this standard.
- Currently, it works only with bt8x8 chips.
+ Support for DMXXXX VPFE based frame grabber. This is the
+ common V4L2 module for following DMXXX SoCs from Texas
+ Instruments:- DM6446 & DM355.
To compile this driver as a module, choose M here: the
- module will be called saa6588.
+ module will be called vpfe-capture.
+
+config VIDEO_DM6446_CCDC
+ tristate "DM6446 CCDC HW module"
+ depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from slave decoders.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_DM355_CCDC
+ tristate "DM355 CCDC HW module"
+ depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables DM355 CCD hw module. DM355 CCDC hw interfaces
+ with decoder modules such as TVP5146 over BT656 or
+ sensor module such as MT9T001 over a raw interface. This
+ module configures the interface and CCDC/ISIF to do
+ video frame capture from a slave decoders
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+config VIDEO_ISIF
+ tristate "ISIF HW module"
+ depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
+ select VIDEO_VPSS_SYSTEM
+ default y
+ help
+ Enables ISIF hw module. This is the hardware module for
+ configuring ISIF in VPFE to capture Raw Bayer RGB data from
+ a image sensor or YUV data from a YUV source.
+
+ To compile this driver as a module, choose M here: the
+ module will be called vpfe.
+
+source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
- depends on ISA && VIDEO_V4L1
+ depends on ISA && VIDEO_V4L2
help
Say Y if you have such a thing.
To compile this driver as a module, choose M here: the
module will be called pms.
-config VIDEO_PLANB
- tristate "PlanB Video-In on PowerMac"
- depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
- help
- PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
- input hardware. If you want to experiment with this, say Y.
- Otherwise, or if you don't understand a word, say N. See
- <http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
-
- Saying M will compile this driver as a module (planb).
-
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
depends on PARPORT && VIDEO_V4L1
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
- depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
+ depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
information.
config VIDEO_CPIA
- tristate "CPiA Video For Linux"
+ tristate "CPiA Video For Linux (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca cpia1 module
+ instead. Note that you need atleast version 0.6.4 of libv4l for
+ the cpia1 gspca module.
+
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
Blaster Webcam II. If you have one of these cameras, say Y here
To compile this driver as a module, choose M here: the
module will be called saa5249.
-config TUNER_3036
- tristate "SAB3036 tuner"
- depends on I2C && VIDEO_V4L1
- help
- Say Y here to include support for Philips SAB3036 compatible tuners.
- If in doubt, say N.
-
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
- select I2C_ALGO_SGI
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
driver for PCI. There is a product page at
<http://www.stradis.com/>.
-config VIDEO_ZORAN_ZR36060
- tristate
-
-config VIDEO_ZORAN
- tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
- help
- Say Y for support for MJPEG capture cards based on the Zoran
- 36057/36067 PCI controller chipset. This includes the Iomega
- Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
- a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
- more information, check <file:Documentation/video4linux/Zoran>.
-
- To compile this driver as a module, choose M here: the
- module will be called zr36067.
-
-config VIDEO_ZORAN_BUZ
- tristate "Iomega Buz support"
- depends on VIDEO_ZORAN
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
- help
- Support for the Iomega Buz MJPEG capture/playback card.
-
-config VIDEO_ZORAN_DC10
- tristate "Pinnacle/Miro DC10(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_SAA7110
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
- help
- Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_DC30
- tristate "Pinnacle/Miro DC30(+) support"
- depends on VIDEO_ZORAN
- select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
- help
- Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
- card. This also supports really old DC10 cards based on the
- zr36050 MJPEG codec and zr36016 VFE.
-
-config VIDEO_ZORAN_LML33
- tristate "Linux Media Labs LML33 support"
- depends on VIDEO_ZORAN
- select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
- help
- Support for the Linux Media Labs LML33 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_LML33R10
- tristate "Linux Media Labs LML33R10 support"
- depends on VIDEO_ZORAN
- select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
- help
- support for the Linux Media Labs LML33R10 MJPEG capture/playback
- card.
-
-config VIDEO_ZORAN_AVS6EYES
- tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
- depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
- select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
- select VIDEO_ZORAN_ZR36060
- help
- Support for the AverMedia 6 Eyes video surveillance card.
+source "drivers/media/video/zoran/Kconfig"
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
- depends on PCI && SONY_LAPTOP && VIDEO_V4L1
+ depends on PCI && SONY_LAPTOP && VIDEO_V4L2
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
- depends on PCI && VIDEO_V4L1 && I2C
+ depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
To compile this driver as a module, choose M here: the
module will be called mxb.
-config VIDEO_DPC
- tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
- depends on PCI && VIDEO_V4L1 && I2C
- select VIDEO_SAA7146_VV
- select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
- ---help---
- This is a video4linux driver for the 'dpc7146 demonstration
- board' by Philips-Semiconductors. It's the reference design
- for SAA7146 bases boards, so if you have some unsupported
- saa7146 based, analog video card, chances are good that it
- will work with this skeleton driver.
-
- To compile this driver as a module, choose M here: the
- module will be called dpc7146.
-
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
source "drivers/media/video/cx23885/Kconfig"
+source "drivers/media/video/au0828/Kconfig"
+
source "drivers/media/video/ivtv/Kconfig"
+source "drivers/media/video/cx18/Kconfig"
+
+source "drivers/media/video/saa7164/Kconfig"
+
config VIDEO_M32R_AR
tristate "AR devices"
- depends on M32R && VIDEO_V4L1
+ depends on M32R && VIDEO_V4L2
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
+config SOC_CAMERA
+ tristate "SoC camera support"
+ depends on VIDEO_V4L2 && HAS_DMA && I2C
+ select VIDEOBUF_GEN
+ help
+ SoC Camera is a common API to several cameras, not connecting
+ over a bus like PCI or USB. For example some i2c camera connected
+ directly to the data bus of an SoC.
+
+config SOC_CAMERA_MT9M001
+ tristate "mt9m001 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
+ help
+ This driver supports MT9M001 cameras from Micron, monochrome
+ and colour models.
+
+config SOC_CAMERA_MT9M111
+ tristate "mt9m111 and mt9m112 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9M111 and MT9M112 cameras from Micron
+
+config SOC_CAMERA_MT9T031
+ tristate "mt9t031 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9T031 cameras from Micron.
+
+config SOC_CAMERA_MT9T112
+ tristate "mt9t112 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This driver supports MT9T112 cameras from Aptina.
+
+config SOC_CAMERA_MT9V022
+ tristate "mt9v022 support"
+ depends on SOC_CAMERA && I2C
+ select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
+ help
+ This driver supports MT9V022 cameras from Micron
+
+config SOC_CAMERA_RJ54N1
+ tristate "rj54n1cb0c support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a rj54n1cb0c video driver
+
+config SOC_CAMERA_TW9910
+ tristate "tw9910 support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a tw9910 video driver
+
+config SOC_CAMERA_PLATFORM
+ tristate "platform camera support"
+ depends on SOC_CAMERA
+ help
+ This is a generic SoC camera platform driver, useful for testing
+
+config SOC_CAMERA_OV772X
+ tristate "ov772x camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a ov772x camera driver
+
+config SOC_CAMERA_OV9640
+ tristate "ov9640 camera support"
+ depends on SOC_CAMERA && I2C
+ help
+ This is a ov9640 camera driver
+
+config MX1_VIDEO
+ bool
+
+config VIDEO_MX1
+ tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
+ depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
+ select FIQ
+ select VIDEOBUF_DMA_CONTIG
+ select MX1_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+
+config MX3_VIDEO
+ bool
+
+config VIDEO_MX3
+ tristate "i.MX3x Camera Sensor Interface driver"
+ depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
+ select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
+ ---help---
+ This is a v4l2 driver for the i.MX3x Camera Sensor Interface
+
+config VIDEO_PXA27x
+ tristate "PXA27x Quick Capture Interface driver"
+ depends on VIDEO_DEV && PXA27x && SOC_CAMERA
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the PXA27x Quick Capture Interface
+
+config VIDEO_SH_MOBILE_CEU
+ tristate "SuperH Mobile CEU Interface driver"
+ depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
+ select VIDEOBUF_DMA_CONTIG
+ ---help---
+ This is a v4l2 driver for the SuperH Mobile CEU Interface
+
+config VIDEO_OMAP2
+ tristate "OMAP2 Camera Capture Interface driver"
+ depends on VIDEO_DEV && ARCH_OMAP2
+ select VIDEOBUF_DMA_SG
+ ---help---
+ This is a v4l2 driver for the TI OMAP2 camera capture interface
+
#
# USB Multimedia device configuration
#
if V4L_USB_DRIVERS && USB
+source "drivers/media/video/uvc/Kconfig"
+
+source "drivers/media/video/gspca/Kconfig"
+
source "drivers/media/video/pvrusb2/Kconfig"
+source "drivers/media/video/hdpvr/Kconfig"
+
source "drivers/media/video/em28xx/Kconfig"
+source "drivers/media/video/tlg2300/Kconfig"
+
+source "drivers/media/video/cx231xx/Kconfig"
+
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
config VIDEO_OVCAMCHIP
- tristate "OmniVision Camera Chip support"
+ tristate "OmniVision Camera Chip support (DEPRECATED)"
depends on I2C && VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l and for the w9968cf
+ atleast version 0.6.3 of libv4l.
+
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
camera drivers.
module will be called ovcamchip.
config USB_W9968CF
- tristate "USB W996[87]CF JPEG Dual Mode Camera support"
- depends on VIDEO_V4L1 && I2C
- select VIDEO_OVCAMCHIP
+ tristate "USB W996[87]CF JPEG Dual Mode Camera support (DEPRECATED)"
+ depends on VIDEO_V4L1 && I2C && VIDEO_OVCAMCHIP
+ default n
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the w9968cf support of the gspca module
+ you need atleast version 0.6.3 of libv4l.
+
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
module will be called w9968cf.
config USB_OV511
- tristate "USB OV511 Camera support"
+ tristate "USB OV511 Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca ov519 module
+ instead. Note that for the ov511 / ov518 support of the gspca module
+ you need atleast version 0.6.0 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
source "drivers/media/video/sn9c102/Kconfig"
config USB_STV680
- tristate "USB STV680 (Pencam) Camera support"
+ tristate "USB STV680 (Pencam) Camera support (DEPRECATED)"
depends on VIDEO_V4L1
+ default n
---help---
+ This driver is DEPRECATED please use the gspca stv0680 module
+ instead. Note that for the gspca stv0680 module you need
+ atleast version 0.6.3 of libv4l.
+
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
See <file:Documentation/video4linux/stv680.txt> for more information
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
+ select VIDEOBUF_GEN
+ select VIDEOBUF_VMALLOC
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
To compile this driver as a module, choose M here: the
module will be called zr364xx.
-endif # V4L_USB_DRIVERS
+config USB_STKWEBCAM
+ tristate "USB Syntek DC1125 Camera support"
+ depends on VIDEO_V4L2 && EXPERIMENTAL
+ ---help---
+ Say Y here if you want to use this type of camera.
+ Supported devices are typically found in some Asus laptops,
+ with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
+ may be supported by the stk11xx driver, from which this is
+ derived, see http://stk11xx.sourceforge.net
+
+ To compile this driver as a module, choose M here: the
+ module will be called stkwebcam.
+config USB_S2255
+ tristate "USB Sensoray 2255 video capture device"
+ depends on VIDEO_V4L2
+ select VIDEOBUF_VMALLOC
+ default n
+ help
+ Say Y here if you want support for the Sensoray 2255 USB device.
+ This driver can be compiled as a module, called s2255drv.
+
+endif # V4L_USB_DRIVERS
endif # VIDEO_CAPTURE_DRIVERS
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff