/* ---------------------------------------------------------------------- */
-/* MSI TV@nywhere remote */
+/* MSI TV@nywhere MASTER remote */
+
IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = {
/* Keys 0 to 9 */
[ 0x00 ] = KEY_0,
/* ---------------------------------------------------------------------- */
+/*
+ Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
+ is marked "KS003". The controller is I2C at address 0x30, but does not seem
+ to respond to probes until a read is performed from a valid device.
+ I don't know why...
+
+ Note: This remote may be of similar or identical design to the
+ Pixelview remote (?). The raw codes and duplicate button codes
+ appear to be the same.
+
+ Henry Wong <henry@stuffedcow.net>
+ Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
+
+*/
+
+IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = {
+
+/* ---- Remote Button Layout ----
+
+ POWER SOURCE SCAN MUTE
+ TV/FM 1 2 3
+ |> 4 5 6
+ <| 7 8 9
+ ^^UP 0 + RECALL
+ vvDN RECORD STOP PLAY
+
+ MINIMIZE ZOOM
+
+ CH+
+ VOL- VOL+
+ CH-
+
+ SNAPSHOT MTS
+
+ << FUNC >> RESET
+*/
+
+ [0x01] = KEY_KP1, /* 1 */
+ [0x0b] = KEY_KP2, /* 2 */
+ [0x1b] = KEY_KP3, /* 3 */
+ [0x05] = KEY_KP4, /* 4 */
+ [0x09] = KEY_KP5, /* 5 */
+ [0x15] = KEY_KP6, /* 6 */
+ [0x06] = KEY_KP7, /* 7 */
+ [0x0a] = KEY_KP8, /* 8 */
+ [0x12] = KEY_KP9, /* 9 */
+ [0x02] = KEY_KP0, /* 0 */
+ [0x10] = KEY_KPPLUS, /* + */
+ [0x13] = KEY_AGAIN, /* Recall */
+
+ [0x1e] = KEY_POWER, /* Power */
+ [0x07] = KEY_TUNER, /* Source */
+ [0x1c] = KEY_SEARCH, /* Scan */
+ [0x18] = KEY_MUTE, /* Mute */
+
+ [0x03] = KEY_RADIO, /* TV/FM */
+ /* The next four keys are duplicates that appear to send the
+ same IR code as Ch+, Ch-, >>, and << . The raw code assigned
+ to them is the actual code + 0x20 - they will never be
+ detected as such unless some way is discovered to distinguish
+ these buttons from those that have the same code. */
+ [0x3f] = KEY_RIGHT, /* |> and Ch+ */
+ [0x37] = KEY_LEFT, /* <| and Ch- */
+ [0x2c] = KEY_UP, /* ^^Up and >> */
+ [0x24] = KEY_DOWN, /* vvDn and << */
+
+ [0x00] = KEY_RECORD, /* Record */
+ [0x08] = KEY_STOP, /* Stop */
+ [0x11] = KEY_PLAY, /* Play */
+
+ [0x0f] = KEY_CLOSE, /* Minimize */
+ [0x19] = KEY_ZOOM, /* Zoom */
+ [0x1a] = KEY_SHUFFLE, /* Snapshot */
+ [0x0d] = KEY_LANGUAGE, /* MTS */
+
+ [0x14] = KEY_VOLUMEDOWN, /* Vol- */
+ [0x16] = KEY_VOLUMEUP, /* Vol+ */
+ [0x17] = KEY_CHANNELDOWN, /* Ch- */
+ [0x1f] = KEY_CHANNELUP, /* Ch+ */
+
+ [0x04] = KEY_REWIND, /* << */
+ [0x0e] = KEY_MENU, /* Function */
+ [0x0c] = KEY_FASTFORWARD, /* >> */
+ [0x1d] = KEY_RESTART, /* Reset */
+};
+EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus);
+
+/* ---------------------------------------------------------------------- */
+
/* Cinergy 1400 DVB-T */
IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = {
[ 0x01 ] = KEY_POWER,
};
EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel);
+/* Kworld Plus TV Analog Lite PCI IR
+ Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+IR_KEYTAB_TYPE ir_codes_kworld_plus_tv_analog[IR_KEYTAB_SIZE] = {
+ [0x0c] = KEY_PROG1, /* Kworld key */
+ [0x16] = KEY_CLOSECD, /* -> ) */
+ [0x1d] = KEY_POWER2,
+
+ [0x00] = KEY_1,
+ [0x01] = KEY_2,
+ [0x02] = KEY_3, /* Two keys have the same code: 3 and left */
+ [0x03] = KEY_4, /* Two keys have the same code: 3 and right */
+ [0x04] = KEY_5,
+ [0x05] = KEY_6,
+ [0x06] = KEY_7,
+ [0x07] = KEY_8,
+ [0x08] = KEY_9,
+ [0x0a] = KEY_0,
+
+ [0x09] = KEY_AGAIN,
+ [0x14] = KEY_MUTE,
+
+ [0x20] = KEY_UP,
+ [0x21] = KEY_DOWN,
+ [0x0b] = KEY_ENTER,
+
+ [0x10] = KEY_CHANNELUP,
+ [0x11] = KEY_CHANNELDOWN,
+
+ /* Couldn't map key left/key right since those
+ conflict with '3' and '4' scancodes
+ I dunno what the original driver does
+ */
+
+ [0x13] = KEY_VOLUMEUP,
+ [0x12] = KEY_VOLUMEDOWN,
+
+ /* The lower part of the IR
+ There are several duplicated keycodes there.
+ Most of them conflict with digits.
+ Add mappings just to the unused scancodes.
+ Somehow, the original driver has a way to know,
+ but this doesn't seem to be on some GPIO.
+ Also, it is not related to the time between keyup
+ and keydown.
+ */
+ [0x19] = KEY_PAUSE, /* Timeshift */
+ [0x1a] = KEY_STOP,
+ [0x1b] = KEY_RECORD,
+
+ [0x22] = KEY_TEXT,
+
+ [0x15] = KEY_AUDIO, /* ((*)) */
+ [0x0f] = KEY_ZOOM,
+ [0x1c] = KEY_SHUFFLE, /* snapshot */
+
+ [0x18] = KEY_RED, /* B */
+ [0x23] = KEY_GREEN, /* C */
+};
+EXPORT_SYMBOL_GPL(ir_codes_kworld_plus_tv_analog);
+
IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
[0x20] = KEY_LIST,
[0x00] = KEY_POWER,
[0x47] = KEY_SLEEP, /* shutdown */
};
EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53);
+
+/* Zogis Real Audio 220 - 32 keys IR */
+IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE] = {
+ [0x1c] = KEY_RADIO,
+ [0x12] = KEY_POWER2,
+
+ [0x01] = KEY_1,
+ [0x02] = KEY_2,
+ [0x03] = KEY_3,
+ [0x04] = KEY_4,
+ [0x05] = KEY_5,
+ [0x06] = KEY_6,
+ [0x07] = KEY_7,
+ [0x08] = KEY_8,
+ [0x09] = KEY_9,
+ [0x00] = KEY_0,
+
+ [0x0c] = KEY_VOLUMEUP,
+ [0x18] = KEY_VOLUMEDOWN,
+ [0x0b] = KEY_CHANNELUP,
+ [0x15] = KEY_CHANNELDOWN,
+ [0x16] = KEY_ENTER,
+
+ [0x11] = KEY_LIST, /* Source */
+ [0x0d] = KEY_AUDIO, /* stereo */
+
+ [0x0f] = KEY_PREVIOUS, /* Prev */
+ [0x1b] = KEY_PAUSE, /* Timeshift */
+ [0x1a] = KEY_NEXT, /* Next */
+
+ [0x0e] = KEY_STOP,
+ [0x1f] = KEY_PLAY,
+ [0x1e] = KEY_PLAYPAUSE, /* Pause */
+
+ [0x1d] = KEY_RECORD,
+ [0x13] = KEY_MUTE,
+ [0x19] = KEY_SHUFFLE, /* Snapshot */
+
+};
+EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys);
+
+/* ATI TV Wonder HD 600 USB
+ Devin Heitmueller <devin.heitmueller@gmail.com>
+ */
+IR_KEYTAB_TYPE ir_codes_ati_tv_wonder_hd_600[IR_KEYTAB_SIZE] = {
+ [0x00] = KEY_RECORD, /* Row 1 */
+ [0x01] = KEY_PLAYPAUSE,
+ [0x02] = KEY_STOP,
+ [0x03] = KEY_POWER,
+ [0x04] = KEY_PREVIOUS, /* Row 2 */
+ [0x05] = KEY_REWIND,
+ [0x06] = KEY_FORWARD,
+ [0x07] = KEY_NEXT,
+ [0x08] = KEY_EPG, /* Row 3 */
+ [0x09] = KEY_HOME,
+ [0x0a] = KEY_MENU,
+ [0x0b] = KEY_CHANNELUP,
+ [0x0c] = KEY_BACK, /* Row 4 */
+ [0x0d] = KEY_UP,
+ [0x0e] = KEY_INFO,
+ [0x0f] = KEY_CHANNELDOWN,
+ [0x10] = KEY_LEFT, /* Row 5 */
+ [0x11] = KEY_SELECT,
+ [0x12] = KEY_RIGHT,
+ [0x13] = KEY_VOLUMEUP,
+ [0x14] = KEY_LAST, /* Row 6 */
+ [0x15] = KEY_DOWN,
+ [0x16] = KEY_MUTE,
+ [0x17] = KEY_VOLUMEDOWN,
+};
+
+EXPORT_SYMBOL_GPL(ir_codes_ati_tv_wonder_hd_600);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff