* If unsure, don't give this parameter.
*
* dslot:
- * NOTE: only one poll value must be given for every card.
+ * NOTE: only one dslot value must be given for every card.
* Also this value must be given for non-E1 cards. If omitted, the E1
* card has D-channel on time slot 16, which is default.
* If 1..15 or 17..31, an alternate time slot is used for D-channel.
* Give the value of the clock control register (A_ST_CLK_DLY)
* of the S/T interfaces in TE mode.
* This register is needed for the TBR3 certification, so don't change it.
+ *
+ * clock:
+ * NOTE: only one clock value must be given once
+ * Selects interface with clock source for mISDN and applications.
+ * Set to card number starting with 1. Set to -1 to disable.
+ * By default, the first card is used as clock source.
+ *
+ * hwid:
+ * NOTE: only one hwid value must be given once
+ * Enable special embedded devices with XHFC controllers.
*/
/*
* #define HFC_REGISTER_DEBUG
*/
-static const char *hfcmulti_revision = "2.02";
+#define HFC_MULTI_VERSION "2.03"
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/mISDNhw.h>
static spinlock_t HFClock; /* global hfc list lock */
static void ph_state_change(struct dchannel *);
-static void (*hfc_interrupt)(void);
-static void (*register_interrupt)(void);
-static int (*unregister_interrupt)(void);
-static int interrupt_registered;
static struct hfc_multi *syncmaster;
-int plxsd_master; /* if we have a master card (yet) */
+static int plxsd_master; /* if we have a master card (yet) */
static spinlock_t plx_lock; /* may not acquire other lock inside */
-EXPORT_SYMBOL(plx_lock);
#define TYP_E1 1
#define TYP_4S 4
#define CLKDEL_TE 0x0f /* CLKDEL in TE mode */
#define CLKDEL_NT 0x6c /* CLKDEL in NT mode
(0x60 MUST be included!) */
-static u_char silence = 0xff; /* silence by LAW */
#define DIP_4S 0x1 /* DIP Switches for Beronet 1S/2S/4S cards */
#define DIP_8S 0x2 /* DIP Switches for Beronet 8S+ cards */
*/
static uint type[MAX_CARDS];
-static uint pcm[MAX_CARDS];
-static uint dslot[MAX_CARDS];
+static int pcm[MAX_CARDS];
+static int dslot[MAX_CARDS];
static uint iomode[MAX_CARDS];
static uint port[MAX_PORTS];
static uint debug;
static uint poll;
+static int clock;
static uint timer;
static uint clockdelay_te = CLKDEL_TE;
static uint clockdelay_nt = CLKDEL_NT;
+#define HWID_NONE 0
+#define HWID_MINIP4 1
+#define HWID_MINIP8 2
+#define HWID_MINIP16 3
+static uint hwid = HWID_NONE;
static int HFC_cnt, Port_cnt, PCM_cnt = 99;
MODULE_AUTHOR("Andreas Eversberg");
MODULE_LICENSE("GPL");
+MODULE_VERSION(HFC_MULTI_VERSION);
module_param(debug, uint, S_IRUGO | S_IWUSR);
module_param(poll, uint, S_IRUGO | S_IWUSR);
+module_param(clock, int, S_IRUGO | S_IWUSR);
module_param(timer, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_te, uint, S_IRUGO | S_IWUSR);
module_param(clockdelay_nt, uint, S_IRUGO | S_IWUSR);
module_param_array(type, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(pcm, uint, NULL, S_IRUGO | S_IWUSR);
-module_param_array(dslot, uint, NULL, S_IRUGO | S_IWUSR);
+module_param_array(pcm, int, NULL, S_IRUGO | S_IWUSR);
+module_param_array(dslot, int, NULL, S_IRUGO | S_IWUSR);
module_param_array(iomode, uint, NULL, S_IRUGO | S_IWUSR);
module_param_array(port, uint, NULL, S_IRUGO | S_IWUSR);
+module_param(hwid, uint, S_IRUGO | S_IWUSR); /* The hardware ID */
#ifdef HFC_REGISTER_DEBUG
#define HFC_outb(hc, reg, val) \
#define HFC_wait_nodebug(hc) (hc->HFC_wait_nodebug(hc))
#endif
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+#include "hfc_multi_8xx.h"
+#endif
+
/* HFC_IO_MODE_PCIMEM */
static void
#ifdef HFC_REGISTER_DEBUG
HFC_outb_pcimem(struct hfc_multi *hc, u_char reg, u_char val)
#endif
{
- writeb(val, (hc->pci_membase)+reg);
+ writeb(val, hc->pci_membase + reg);
}
static u_char
#ifdef HFC_REGISTER_DEBUG
HFC_inb_pcimem(struct hfc_multi *hc, u_char reg)
#endif
{
- return readb((hc->pci_membase)+reg);
+ return readb(hc->pci_membase + reg);
}
static u_short
#ifdef HFC_REGISTER_DEBUG
HFC_inw_pcimem(struct hfc_multi *hc, u_char reg)
#endif
{
- return readw((hc->pci_membase)+reg);
+ return readw(hc->pci_membase + reg);
}
static void
#ifdef HFC_REGISTER_DEBUG
HFC_wait_pcimem(struct hfc_multi *hc)
#endif
{
- while (readb((hc->pci_membase)+R_STATUS) & V_BUSY);
+ while (readb(hc->pci_membase + R_STATUS) & V_BUSY)
+ cpu_relax();
}
/* HFC_IO_MODE_REGIO */
HFC_outb_regio(struct hfc_multi *hc, u_char reg, u_char val)
#endif
{
- outb(reg, (hc->pci_iobase)+4);
+ outb(reg, hc->pci_iobase + 4);
outb(val, hc->pci_iobase);
}
static u_char
HFC_inb_regio(struct hfc_multi *hc, u_char reg)
#endif
{
- outb(reg, (hc->pci_iobase)+4);
+ outb(reg, hc->pci_iobase + 4);
return inb(hc->pci_iobase);
}
static u_short
HFC_inw_regio(struct hfc_multi *hc, u_char reg)
#endif
{
- outb(reg, (hc->pci_iobase)+4);
+ outb(reg, hc->pci_iobase + 4);
return inw(hc->pci_iobase);
}
static void
HFC_wait_regio(struct hfc_multi *hc)
#endif
{
- outb(R_STATUS, (hc->pci_iobase)+4);
- while (inb(hc->pci_iobase) & V_BUSY);
+ outb(R_STATUS, hc->pci_iobase + 4);
+ while (inb(hc->pci_iobase) & V_BUSY)
+ cpu_relax();
}
#ifdef HFC_REGISTER_DEBUG
if (regname[0] == '\0')
strcpy(regname, "register");
- bits[7] = '0'+(!!(val&1));
- bits[6] = '0'+(!!(val&2));
- bits[5] = '0'+(!!(val&4));
- bits[4] = '0'+(!!(val&8));
- bits[3] = '0'+(!!(val&16));
- bits[2] = '0'+(!!(val&32));
- bits[1] = '0'+(!!(val&64));
- bits[0] = '0'+(!!(val&128));
+ bits[7] = '0' + (!!(val & 1));
+ bits[6] = '0' + (!!(val & 2));
+ bits[5] = '0' + (!!(val & 4));
+ bits[4] = '0' + (!!(val & 8));
+ bits[3] = '0' + (!!(val & 16));
+ bits[2] = '0' + (!!(val & 32));
+ bits[1] = '0' + (!!(val & 64));
+ bits[0] = '0' + (!!(val & 128));
printk(KERN_DEBUG
"HFC_outb(chip %d, %02x=%s, 0x%02x=%s); in %s() line %d\n",
hc->id, reg, regname, val, bits, function, line);
if (regname[0] == '\0')
strcpy(regname, "register");
- bits[7] = '0'+(!!(val&1));
- bits[6] = '0'+(!!(val&2));
- bits[5] = '0'+(!!(val&4));
- bits[4] = '0'+(!!(val&8));
- bits[3] = '0'+(!!(val&16));
- bits[2] = '0'+(!!(val&32));
- bits[1] = '0'+(!!(val&64));
- bits[0] = '0'+(!!(val&128));
+ bits[7] = '0' + (!!(val & 1));
+ bits[6] = '0' + (!!(val & 2));
+ bits[5] = '0' + (!!(val & 4));
+ bits[4] = '0' + (!!(val & 8));
+ bits[3] = '0' + (!!(val & 16));
+ bits[2] = '0' + (!!(val & 32));
+ bits[1] = '0' + (!!(val & 64));
+ bits[0] = '0' + (!!(val & 128));
printk(KERN_DEBUG
"HFC_inb(chip %d, %02x=%s) = 0x%02x=%s; in %s() line %d\n",
hc->id, reg, regname, val, bits, function, line);
#endif
/* write fifo data (REGIO) */
-void
+static void
write_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
{
outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
}
}
/* write fifo data (PCIMEM) */
-void
+static void
write_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
{
while (len>>2) {
len--;
}
}
+
/* read fifo data (REGIO) */
-void
+static void
read_fifo_regio(struct hfc_multi *hc, u_char *data, int len)
{
outb(A_FIFO_DATA0, (hc->pci_iobase)+4);
}
/* read fifo data (PCIMEM) */
-void
+static void
read_fifo_pcimem(struct hfc_multi *hc, u_char *data, int len)
{
while (len>>2) {
}
}
-
static void
enable_hwirq(struct hfc_multi *hc)
{
}
-void
+static void
vpm_init(struct hfc_multi *wc)
{
unsigned char reg;
}
}
-void
+#ifdef UNUSED
+static void
vpm_check(struct hfc_multi *hctmp)
{
unsigned char gpi2;
if ((gpi2 & 0x3) != 0x3)
printk(KERN_DEBUG "Got interrupt 0x%x from VPM!\n", gpi2);
}
+#endif /* UNUSED */
/*
*
*/
-void
+static void
vpm_echocan_on(struct hfc_multi *hc, int ch, int taps)
{
unsigned int timeslot;
vpm_out(hc, unit, timeslot, 0x7e);
}
-void
+static void
vpm_echocan_off(struct hfc_multi *hc, int ch)
{
unsigned int timeslot;
static inline void
hfcmulti_resync(struct hfc_multi *locked, struct hfc_multi *newmaster, int rm)
{
- struct hfc_multi *hc, *next, *pcmmaster = 0;
- u_int *plx_acc_32, pv;
+ struct hfc_multi *hc, *next, *pcmmaster = NULL;
+ void __iomem *plx_acc_32;
+ u_int pv;
u_long flags;
spin_lock_irqsave(&HFClock, flags);
/* Disable sync of all cards */
list_for_each_entry_safe(hc, next, &HFClist, list) {
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv &= ~PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip)) {
pcmmaster = hc;
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"Schedule SYNC_I\n");
printk(KERN_DEBUG "id=%d (0x%p) = syncronized with "
"interface.\n", hc->id, hc);
/* Enable new sync master */
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
/* switch to jatt PLL, if not disabled by RX_SYNC */
- if (hc->type == 1 && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
+ if (hc->ctype == HFC_TYPE_E1
+ && !test_bit(HFC_CHIP_RX_SYNC, &hc->chip)) {
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG "Schedule jatt PLL\n");
hc->e1_resync |= 2; /* switch to jatt */
printk(KERN_DEBUG
"id=%d (0x%p) = PCM master syncronized "
"with QUARTZ\n", hc->id, hc);
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
/* Use the crystal clock for the PCM
master card */
if (debug & DEBUG_HFCMULTI_PLXSD)
if (debug & DEBUG_HFCMULTI_PLXSD)
printk(KERN_DEBUG
"QUARTZ is automatically "
- "enabled by HFC-%dS\n", hc->type);
+ "enabled by HFC-%dS\n", hc->ctype);
}
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
if (hc->syncronized) {
if (syncmaster == NULL) {
if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_WARNING "%s: GOT sync on card %d"
+ printk(KERN_DEBUG "%s: GOT sync on card %d"
" (id=%d)\n", __func__, hc->id + 1,
hc->id);
hfcmulti_resync(hc, hc, rm);
} else {
if (syncmaster == hc) {
if (debug & DEBUG_HFCMULTI_PLXSD)
- printk(KERN_WARNING "%s: LOST sync on card %d"
+ printk(KERN_DEBUG "%s: LOST sync on card %d"
" (id=%d)\n", __func__, hc->id + 1,
hc->id);
hfcmulti_resync(hc, NULL, rm);
static void
release_io_hfcmulti(struct hfc_multi *hc)
{
- u_int *plx_acc_32, pv;
+ void __iomem *plx_acc_32;
+ u_int pv;
u_long plx_flags;
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: release PLXSD card %d\n",
__func__, hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
writel(PLX_GPIOC_INIT, plx_acc_32);
pv = readl(plx_acc_32);
/* Termination off */
pv &= ~PLX_DSP_RES_N;
writel(pv, plx_acc_32);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: PCM off: PLX_GPIO=%x\n",
+ printk(KERN_DEBUG "%s: PCM off: PLX_GPIO=%x\n",
__func__, pv);
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
/* disable memory mapped ports / io ports */
test_and_clear_bit(HFC_CHIP_PLXSD, &hc->chip); /* prevent resync */
- pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
+ if (hc->pci_dev)
+ pci_write_config_word(hc->pci_dev, PCI_COMMAND, 0);
if (hc->pci_membase)
- iounmap((void *)hc->pci_membase);
+ iounmap(hc->pci_membase);
if (hc->plx_membase)
- iounmap((void *)hc->plx_membase);
+ iounmap(hc->plx_membase);
if (hc->pci_iobase)
release_region(hc->pci_iobase, 8);
+ if (hc->xhfc_membase)
+ iounmap((void *)hc->xhfc_membase);
if (hc->pci_dev) {
pci_disable_device(hc->pci_dev);
u_long flags, val, val2 = 0, rev;
int i, err = 0;
u_char r_conf_en, rval;
- u_int *plx_acc_32, pv;
+ void __iomem *plx_acc_32;
+ u_int pv;
u_long plx_flags, hfc_flags;
int plx_count;
struct hfc_multi *pos, *next, *plx_last_hc;
/* revision check */
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
- val = HFC_inb(hc, R_CHIP_ID)>>4;
- if (val != 0x8 && val != 0xc && val != 0xe) {
+ val = HFC_inb(hc, R_CHIP_ID);
+ if ((val >> 4) != 0x8 && (val >> 4) != 0xc && (val >> 4) != 0xe &&
+ (val >> 1) != 0x31) {
printk(KERN_INFO "HFC_multi: unknown CHIP_ID:%x\n", (u_int)val);
err = -EIO;
goto out;
rev = HFC_inb(hc, R_CHIP_RV);
printk(KERN_INFO
"HFC_multi: detected HFC with chip ID=0x%lx revision=%ld%s\n",
- val, rev, (rev == 0) ? " (old FIFO handling)" : "");
- if (rev == 0) {
+ val, rev, (rev == 0 && (hc->ctype != HFC_TYPE_XHFC)) ?
+ " (old FIFO handling)" : "");
+ if (hc->ctype != HFC_TYPE_XHFC && rev == 0) {
test_and_set_bit(HFC_CHIP_REVISION0, &hc->chip);
printk(KERN_WARNING
"HFC_multi: NOTE: Your chip is revision 0, "
hc->Zlen = 8000;
hc->DTMFbase = 0x2000;
}
+ if (hc->ctype == HFC_TYPE_XHFC) {
+ hc->Flen = 0x8;
+ hc->Zmin = 0x0;
+ hc->Zlen = 64;
+ hc->DTMFbase = 0x0;
+ }
hc->max_trans = poll << 1;
if (hc->max_trans > hc->Zlen)
hc->max_trans = hc->Zlen;
printk(KERN_DEBUG "%s: initializing PLXSD card %d\n",
__func__, hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
writel(PLX_GPIOC_INIT, plx_acc_32);
pv = readl(plx_acc_32);
/* The first and the last cards are terminating the PCM bus */
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: slave/term: PLX_GPIO=%x\n",
+ printk(KERN_DEBUG "%s: slave/term: PLX_GPIO=%x\n",
__func__, pv);
/*
* If we are the 3rd PLXSD card or higher, we must turn
"we disable termination\n",
__func__, plx_last_hc->id + 1);
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(plx_last_hc->plx_membase
- + PLX_GPIOC);
+ plx_acc_32 = plx_last_hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv &= ~PLX_TERM_ON;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: term off: PLX_GPIO=%x\n",
- __func__, pv);
+ printk(KERN_DEBUG
+ "%s: term off: PLX_GPIO=%x\n",
+ __func__, pv);
}
spin_unlock_irqrestore(&HFClock, hfc_flags);
hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
}
+ if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+ hc->hw.r_pcm_md0 = V_F0_LEN; /* shift clock for DSP */
+
/* we only want the real Z2 read-pointer for revision > 0 */
if (!test_bit(HFC_CHIP_REVISION0, &hc->chip))
hc->hw.r_ram_sz |= V_FZ_MD;
/* soft reset */
HFC_outb(hc, R_CTRL, hc->hw.r_ctrl);
- HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, 0x0C /* R_FIFO_THRES */,
+ 0x11 /* 16 Bytes TX/RX */);
+ else
+ HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
HFC_outb(hc, R_FIFO_MD, 0);
- hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES | V_RLD_EPR;
+ if (hc->ctype == HFC_TYPE_XHFC)
+ hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES;
+ else
+ hc->hw.r_cirm = V_SRES | V_HFCRES | V_PCMRES | V_STRES
+ | V_RLD_EPR;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(100);
hc->hw.r_cirm = 0;
HFC_outb(hc, R_CIRM, hc->hw.r_cirm);
udelay(100);
- HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
+ if (hc->ctype != HFC_TYPE_XHFC)
+ HFC_outb(hc, R_RAM_SZ, hc->hw.r_ram_sz);
/* Speech Design PLX bridge pcm and sync mode */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
/* Connect PCM */
if (hc->hw.r_pcm_md0 & V_PCM_MD) {
pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
pv |= PLX_SYNC_O_EN;
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: master: PLX_GPIO=%x\n",
+ printk(KERN_DEBUG "%s: master: PLX_GPIO=%x\n",
__func__, pv);
} else {
pv &= ~(PLX_MASTER_EN | PLX_SLAVE_EN_N);
pv &= ~PLX_SYNC_O_EN;
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: slave: PLX_GPIO=%x\n",
+ printk(KERN_DEBUG "%s: slave: PLX_GPIO=%x\n",
__func__, pv);
}
writel(pv, plx_acc_32);
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0xa0);
if (test_bit(HFC_CHIP_PLXSD, &hc->chip))
HFC_outb(hc, R_PCM_MD2, V_SYNC_SRC); /* sync via SYNC_I / O */
+ else if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+ HFC_outb(hc, R_PCM_MD2, 0x10); /* V_C2O_EN */
else
HFC_outb(hc, R_PCM_MD2, 0x00); /* sync from interface */
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
for (i = 0; i < 256; i++) {
HFC_outb_nodebug(hc, R_SLOT, i);
HFC_outb_nodebug(hc, A_SL_CFG, 0);
- HFC_outb_nodebug(hc, A_CONF, 0);
+ if (hc->ctype != HFC_TYPE_XHFC)
+ HFC_outb_nodebug(hc, A_CONF, 0);
hc->slot_owner[i] = -1;
}
HFC_outb(hc, R_BRG_PCM_CFG, V_PCM_CLK);
}
+ if (test_bit(HFC_CHIP_EMBSD, &hc->chip))
+ HFC_outb(hc, 0x02 /* R_CLK_CFG */, 0x40 /* V_CLKO_OFF */);
+
/* B410P GPIO */
if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
printk(KERN_NOTICE "Setting GPIOs\n");
/* retry with master clock */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase +
- PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_MASTER_EN | PLX_SLAVE_EN_N;
pv |= PLX_SYNC_O_EN;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: master: PLX_GPIO"
- "=%x\n", __func__, pv);
+ printk(KERN_DEBUG "%s: master: "
+ "PLX_GPIO=%x\n", __func__, pv);
}
hc->hw.r_pcm_md0 |= V_PCM_MD;
HFC_outb(hc, R_PCM_MD0, hc->hw.r_pcm_md0 | 0x00);
if (test_bit(HFC_CHIP_PCM_MASTER, &hc->chip))
plxsd_master = 1;
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc_32 = (u_int *)(hc->plx_membase+PLX_GPIOC);
+ plx_acc_32 = hc->plx_membase + PLX_GPIOC;
pv = readl(plx_acc_32);
pv |= PLX_DSP_RES_N;
writel(pv, plx_acc_32);
spin_unlock_irqrestore(&plx_lock, plx_flags);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: reset off: PLX_GPIO=%x\n",
+ printk(KERN_DEBUG "%s: reset off: PLX_GPIO=%x\n",
__func__, pv);
}
HFC_outb(hc, R_TI_WD, poll_timer);
hc->hw.r_irqmsk_misc |= V_TI_IRQMSK;
- /*
- * set up 125us interrupt, only if function pointer is available
- * and module parameter timer is set
- */
- if (timer && hfc_interrupt && register_interrupt) {
- /* only one chip should use this interrupt */
- timer = 0;
- interrupt_registered = 1;
- hc->hw.r_irqmsk_misc |= V_PROC_IRQMSK;
- /* deactivate other interrupts in ztdummy */
- register_interrupt();
- }
-
/* set E1 state machine IRQ */
- if (hc->type == 1)
+ if (hc->ctype == HFC_TYPE_E1)
hc->hw.r_irqmsk_misc |= V_STA_IRQMSK;
/* set DTMF detection */
r_conf_en = V_CONF_EN | V_ULAW;
else
r_conf_en = V_CONF_EN;
- HFC_outb(hc, R_CONF_EN, r_conf_en);
+ if (hc->ctype != HFC_TYPE_XHFC)
+ HFC_outb(hc, R_CONF_EN, r_conf_en);
/* setting leds */
switch (hc->leds) {
break;
}
+ if (test_bit(HFC_CHIP_EMBSD, &hc->chip)) {
+ hc->hw.r_st_sync = 0x10; /* V_AUTO_SYNCI */
+ HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
+ }
+
/* set master clock */
if (hc->masterclk >= 0) {
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: setting ST master clock "
"to port %d (0..%d)\n",
__func__, hc->masterclk, hc->ports-1);
- hc->hw.r_st_sync = hc->masterclk | V_AUTO_SYNC;
+ hc->hw.r_st_sync |= (hc->masterclk | V_AUTO_SYNC);
HFC_outb(hc, R_ST_SYNC, hc->hw.r_st_sync);
}
+
+
/* setting misc irq */
HFC_outb(hc, R_IRQMSK_MISC, hc->hw.r_irqmsk_misc);
if (debug & DEBUG_HFCMULTI_INIT)
coeff[(co<<1)|1] = mantissa;
}
if (debug & DEBUG_HFCMULTI_DTMF)
- printk("%s: DTMF ready %08x %08x %08x %08x "
- "%08x %08x %08x %08x\n", __func__,
+ printk(" DTMF ready %08x %08x %08x %08x "
+ "%08x %08x %08x %08x\n",
coeff[0], coeff[1], coeff[2], coeff[3],
coeff[4], coeff[5], coeff[6], coeff[7]);
hc->chan[ch].coeff_count++;
hc->chan[ch].coeff_count = 0;
skb = mI_alloc_skb(512, GFP_ATOMIC);
if (!skb) {
- printk(KERN_WARNING "%s: No memory for skb\n",
+ printk(KERN_DEBUG "%s: No memory for skb\n",
__func__);
continue;
}
Fspace = 1;
}
/* one frame only for ST D-channels, to allow resending */
- if (hc->type != 1 && dch) {
+ if (hc->ctype != HFC_TYPE_E1 && dch) {
if (f1 != f2)
Fspace = 0;
}
"%d!=%d\n", __func__, hc->id + 1, temp, z2);
z2 = temp; /* repeat unti Z2 is equal */
}
+ hc->chan[ch].Zfill = z1 - z2;
+ if (hc->chan[ch].Zfill < 0)
+ hc->chan[ch].Zfill += hc->Zlen;
Zspace = z2 - z1;
if (Zspace <= 0)
Zspace += hc->Zlen;
"slot_tx %d\n",
__func__, ch, slot_tx);
/* connect slot */
- HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
- V_HDLC_TRP | V_IFF);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, 0xc0
+ | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+ /* Enable FIFO, no interrupt */
+ else
+ HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+ V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
HFC_wait_nodebug(hc);
- HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
- V_HDLC_TRP | V_IFF);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, 0xc0
+ | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+ /* Enable FIFO, no interrupt */
+ else
+ HFC_outb(hc, A_CON_HDLC, 0xc0 | 0x00 |
+ V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1);
HFC_wait_nodebug(hc);
}
return; /* no data */
}
+ /* "fill fifo if empty" feature */
+ if (bch && test_bit(FLG_FILLEMPTY, &bch->Flags)
+ && !test_bit(FLG_HDLC, &bch->Flags) && z2 == z1) {
+ if (debug & DEBUG_HFCMULTI_FILL)
+ printk(KERN_DEBUG "%s: buffer empty, so we have "
+ "underrun\n", __func__);
+ /* fill buffer, to prevent future underrun */
+ hc->write_fifo(hc, hc->silence_data, poll >> 1);
+ Zspace -= (poll >> 1);
+ }
+
/* if audio data and connected slot */
if (bch && (!test_bit(FLG_HDLC, &bch->Flags)) && (!*txpending)
&& slot_tx >= 0) {
"FIFO data: channel %d slot_tx %d\n",
__func__, ch, slot_tx);
/* disconnect slot */
- HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, 0x80
+ | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+ /* Enable FIFO, no interrupt */
+ else
+ HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+ V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1 | 1);
HFC_wait_nodebug(hc);
- HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 | V_HDLC_TRP | V_IFF);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, 0x80
+ | 0x07 << 2 | V_HDLC_TRP | V_IFF);
+ /* Enable FIFO, no interrupt */
+ else
+ HFC_outb(hc, A_CON_HDLC, 0x80 | 0x00 |
+ V_HDLC_TRP | V_IFF);
HFC_outb_nodebug(hc, R_FIFO, ch<<1);
HFC_wait_nodebug(hc);
}
printk(KERN_DEBUG "%s(card %d): fifo(%d) has %d bytes space "
"left (z1=%04x, z2=%04x) sending %d of %d bytes %s\n",
__func__, hc->id + 1, ch, Zspace, z1, z2, ii-i, len-i,
- temp ? "HDLC":"TRANS");
-
+ temp ? "HDLC" : "TRANS");
/* Have to prep the audio data */
hc->write_fifo(hc, d, ii - i);
+ hc->chan[ch].Zfill += ii - i;
*idxp = ii;
/* if not all data has been written */
* no more data at all. this prevents sending an undefined value.
*/
if (bch && test_bit(FLG_TRANSPARENT, &bch->Flags))
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
}
if (dch)
recv_Dchannel(dch);
else
- recv_Bchannel(bch);
+ recv_Bchannel(bch, MISDN_ID_ANY);
*sp = skb;
again++;
goto next_frame;
"(z1=%04x, z2=%04x) TRANS\n",
__func__, hc->id + 1, ch, Zsize, z1, z2);
/* only bch is transparent */
- recv_Bchannel(bch);
+ recv_Bchannel(bch, hc->chan[ch].Zfill);
*sp = skb;
}
}
spin_unlock_irqrestore(&HFClock, flags);
}
- if (hc->type != 1 || hc->e1_state == 1)
+ if (hc->ctype != HFC_TYPE_E1 || hc->e1_state == 1)
for (ch = 0; ch <= 31; ch++) {
if (hc->created[hc->chan[ch].port]) {
hfcmulti_tx(hc, ch);
}
}
}
- if (hc->type == 1 && hc->created[0]) {
+ if (hc->ctype == HFC_TYPE_E1 && hc->created[0]) {
dch = hc->chan[hc->dslot].dch;
if (test_bit(HFC_CFG_REPORT_LOS, &hc->chan[hc->dslot].cfg)) {
/* LOS */
static int iq1 = 0, iq2 = 0, iq3 = 0, iq4 = 0,
iq5 = 0, iq6 = 0, iqcnt = 0;
#endif
- static int count;
struct hfc_multi *hc = dev_id;
struct dchannel *dch;
u_char r_irq_statech, status, r_irq_misc, r_irq_oview;
int i;
- u_short *plx_acc, wval;
+ void __iomem *plx_acc;
+ u_short wval;
u_char e1_syncsta, temp;
u_long flags;
"card %d, this is no bug.\n", hc->id + 1, irqsem);
irqsem = hc->id + 1;
#endif
-
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+ if (hc->immap->im_cpm.cp_pbdat & hc->pb_irqmsk)
+ goto irq_notforus;
+#endif
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, flags);
- plx_acc = (u_short *)(hc->plx_membase + PLX_INTCSR);
+ plx_acc = hc->plx_membase + PLX_INTCSR;
wval = readw(plx_acc);
spin_unlock_irqrestore(&plx_lock, flags);
if (!(wval & PLX_INTCSR_LINTI1_STATUS))
iqcnt = 0;
}
#endif
+
if (!r_irq_statech &&
!(status & (V_DTMF_STA | V_LOST_STA | V_EXT_IRQSTA |
V_MISC_IRQSTA | V_FR_IRQSTA))) {
}
hc->irqcnt++;
if (r_irq_statech) {
- if (hc->type != 1)
+ if (hc->ctype != HFC_TYPE_E1)
ph_state_irq(hc, r_irq_statech);
}
if (status & V_EXT_IRQSTA)
if (status & V_MISC_IRQSTA) {
/* misc IRQ */
r_irq_misc = HFC_inb_nodebug(hc, R_IRQ_MISC);
+ r_irq_misc &= hc->hw.r_irqmsk_misc; /* ignore disabled irqs */
if (r_irq_misc & V_STA_IRQ) {
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
/* state machine */
dch = hc->chan[hc->dslot].dch;
e1_syncsta = HFC_inb_nodebug(hc, R_SYNC_STA);
plxsd_checksync(hc, 0);
}
}
- if (r_irq_misc & V_TI_IRQ)
+ if (r_irq_misc & V_TI_IRQ) {
+ if (hc->iclock_on)
+ mISDN_clock_update(hc->iclock, poll, NULL);
handle_timer_irq(hc);
+ }
- if (r_irq_misc & V_DTMF_IRQ) {
- /* -> DTMF IRQ */
+ if (r_irq_misc & V_DTMF_IRQ)
hfcmulti_dtmf(hc);
- }
- /* TODO: REPLACE !!!! 125 us Interrupts are not acceptable */
+
if (r_irq_misc & V_IRQ_PROC) {
- /* IRQ every 125us */
- count++;
- /* generate 1kHz signal */
- if (count == 8) {
- if (hfc_interrupt)
- hfc_interrupt();
- count = 0;
- }
+ static int irq_proc_cnt;
+ if (!irq_proc_cnt++)
+ printk(KERN_DEBUG "%s: got V_IRQ_PROC -"
+ " this should not happen\n", __func__);
}
}
int conf;
if (ch < 0 || ch > 31)
- return EINVAL;
+ return -EINVAL;
oslot_tx = hc->chan[ch].slot_tx;
oslot_rx = hc->chan[ch].slot_rx;
conf = hc->chan[ch].conf;
if (hc->slot_owner[oslot_tx<<1] == ch) {
HFC_outb(hc, R_SLOT, oslot_tx << 1);
HFC_outb(hc, A_SL_CFG, 0);
- HFC_outb(hc, A_CONF, 0);
+ if (hc->ctype != HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CONF, 0);
hc->slot_owner[oslot_tx<<1] = -1;
} else {
if (debug & DEBUG_HFCMULTI_MODE)
flow_tx, routing, conf);
HFC_outb(hc, R_SLOT, slot_tx << 1);
HFC_outb(hc, A_SL_CFG, (ch<<1) | routing);
- HFC_outb(hc, A_CONF, (conf < 0) ? 0 : (conf | V_CONF_SL));
+ if (hc->ctype != HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CONF,
+ (conf < 0) ? 0 : (conf | V_CONF_SL));
hc->slot_owner[slot_tx << 1] = ch;
hc->chan[ch].slot_tx = slot_tx;
hc->chan[ch].bank_tx = bank_tx;
else
flow_rx = 0xc0; /* ST->(FIFO,PCM) */
/* put on slot */
- routing = bank_rx?0x80:0xc0; /* reversed */
+ routing = bank_rx ? 0x80 : 0xc0; /* reversed */
if (conf >= 0 || bank_rx > 1)
routing = 0x40; /* loop */
if (debug & DEBUG_HFCMULTI_MODE)
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
- if (hc->chan[ch].bch && hc->type != 1) {
+ if (hc->chan[ch].bch && hc->ctype != HFC_TYPE_E1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] &=
- ((ch & 0x3) == 0)? ~V_B1_EN: ~V_B2_EN;
+ ((ch & 0x3) == 0) ? ~V_B1_EN : ~V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
/* undocumented: delay after R_ST_SEL */
udelay(1);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
HFC_outb(hc, R_SLOT, (((ch / 4) * 8) +
((ch % 4) * 4)) << 1);
HFC_outb(hc, A_SL_CFG, 0x80 | 0x20 | (ch << 1));
/* enable TX fifo */
HFC_outb(hc, R_FIFO, ch << 1);
HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
- V_HDLC_TRP | V_IFF);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, flow_tx | 0x07 << 2 |
+ V_HDLC_TRP | V_IFF);
+ /* Enable FIFO, no interrupt */
+ else
+ HFC_outb(hc, A_CON_HDLC, flow_tx | 0x00 |
+ V_HDLC_TRP | V_IFF);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
/* tx silence */
- HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, silence);
+ HFC_outb_nodebug(hc, A_FIFO_DATA0_NOINC, hc->silence);
/* enable RX fifo */
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
- HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 | V_HDLC_TRP);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ HFC_outb(hc, A_CON_HDLC, flow_rx | 0x07 << 2 |
+ V_HDLC_TRP);
+ /* Enable FIFO, no interrupt*/
+ else
+ HFC_outb(hc, A_CON_HDLC, flow_rx | 0x00 |
+ V_HDLC_TRP);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, A_IRQ_MSK, 0);
HFC_outb(hc, R_INC_RES_FIFO, V_RES_F);
HFC_wait(hc);
}
- if (hc->type != 1) {
+ if (hc->ctype != HFC_TYPE_E1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
((ch & 0x3) == 0) ? V_B1_EN : V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
/* enable TX fifo */
HFC_outb(hc, R_FIFO, ch<<1);
HFC_wait(hc);
- if (hc->type == 1 || hc->chan[ch].bch) {
+ if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch) {
/* E1 or B-channel */
HFC_outb(hc, A_CON_HDLC, flow_tx | 0x04);
HFC_outb(hc, A_SUBCH_CFG, 0);
HFC_outb(hc, R_FIFO, (ch<<1)|1);
HFC_wait(hc);
HFC_outb(hc, A_CON_HDLC, flow_rx | 0x04);
- if (hc->type == 1 || hc->chan[ch].bch)
+ if (hc->ctype == HFC_TYPE_E1 || hc->chan[ch].bch)
HFC_outb(hc, A_SUBCH_CFG, 0); /* full 8 bits */
else
HFC_outb(hc, A_SUBCH_CFG, 2); /* 2 bits dchannel */
HFC_wait(hc);
if (hc->chan[ch].bch) {
test_and_set_bit(FLG_HDLC, &hc->chan[ch].bch->Flags);
- if (hc->type != 1) {
+ if (hc->ctype != HFC_TYPE_E1) {
hc->hw.a_st_ctrl0[hc->chan[ch].port] |=
((ch&0x3) == 0) ? V_B1_EN : V_B2_EN;
HFC_outb(hc, R_ST_SEL, hc->chan[ch].port);
hfcmulti_pcm(struct hfc_multi *hc, int ch, int slot_tx, int bank_tx,
int slot_rx, int bank_rx)
{
- if (slot_rx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
+ if (slot_tx < 0 || slot_rx < 0 || bank_tx < 0 || bank_rx < 0) {
/* disable PCM */
mode_hfcmulti(hc, ch, hc->chan[ch].protocol, -1, 0, -1, 0);
return;
case HW_RESET_REQ:
/* start activation */
spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_RESET_REQ no BRI\n",
case HW_DEACT_REQ:
/* start deactivation */
spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_DEACT_REQ no BRI\n",
break;
case HW_POWERUP_REQ:
spin_lock_irqsave(&hc->lock, flags);
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: HW_POWERUP_REQ no BRI\n",
__func__, hc->chan[dch->slot].port,
hc->ports-1);
/* start activation */
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
ph_state_change(dch);
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
__func__, hc->chan[dch->slot].port,
hc->ports-1);
/* start deactivation */
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG
"%s: PH_DEACTIVATE no BRI\n",
u_long flags;
spin_lock_irqsave(&hc->lock, flags);
- if (test_and_clear_bit(FLG_TX_NEXT, &bch->Flags)) {
- dev_kfree_skb(bch->next_skb);
- bch->next_skb = NULL;
- }
- if (bch->tx_skb) {
- dev_kfree_skb(bch->tx_skb);
- bch->tx_skb = NULL;
- }
- bch->tx_idx = 0;
- if (bch->rx_skb) {
- dev_kfree_skb(bch->rx_skb);
- bch->rx_skb = NULL;
- }
+ mISDN_clear_bchannel(bch);
hc->chan[bch->slot].coeff_count = 0;
- test_and_clear_bit(FLG_ACTIVE, &bch->Flags);
- test_and_clear_bit(FLG_TX_BUSY, &bch->Flags);
hc->chan[bch->slot].rx_off = 0;
hc->chan[bch->slot].conf = -1;
mode_hfcmulti(hc, bch->slot, ISDN_P_NONE, -1, 0, -1, 0);
switch (hh->id) {
case HFC_SPL_LOOP_ON: /* set sample loop */
if (debug & DEBUG_HFCMULTI_MSG)
- printk(KERN_DEBUG
- "%s: HFC_SPL_LOOP_ON (len = %d)\n",
- __func__, skb->len);
+ printk(KERN_DEBUG
+ "%s: HFC_SPL_LOOP_ON (len = %d)\n",
+ __func__, skb->len);
ret = 0;
break;
case HFC_SPL_LOOP_OFF: /* set silence */
switch (cq->op) {
case MISDN_CTRL_GETOP:
cq->op = MISDN_CTRL_HFC_OP | MISDN_CTRL_HW_FEATURES_OP
- | MISDN_CTRL_RX_OFF;
+ | MISDN_CTRL_RX_OFF | MISDN_CTRL_FILL_EMPTY;
break;
case MISDN_CTRL_RX_OFF: /* turn off / on rx stream */
hc->chan[bch->slot].rx_off = !!cq->p1;
printk(KERN_DEBUG "%s: RX_OFF request (nr=%d off=%d)\n",
__func__, bch->nr, hc->chan[bch->slot].rx_off);
break;
+ case MISDN_CTRL_FILL_EMPTY: /* fill fifo, if empty */
+ test_and_set_bit(FLG_FILLEMPTY, &bch->Flags);
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: FILL_EMPTY request (nr=%d "
+ "off=%d)\n", __func__, bch->nr, !!cq->p1);
+ break;
case MISDN_CTRL_HW_FEATURES: /* fill features structure */
if (debug & DEBUG_HFCMULTI_MSG)
printk(KERN_DEBUG "%s: HW_FEATURE request\n",
features->hfc_id = hc->id;
if (test_bit(HFC_CHIP_DTMF, &hc->chip))
features->hfc_dtmf = 1;
+ if (test_bit(HFC_CHIP_CONF, &hc->chip))
+ features->hfc_conf = 1;
features->hfc_loops = 0;
if (test_bit(HFC_CHIP_B410P, &hc->chip)) {
features->hfc_echocanhw = 1;
static void
ph_state_change(struct dchannel *dch)
{
- struct hfc_multi *hc = dch->hw;
+ struct hfc_multi *hc;
int ch, i;
if (!dch) {
- printk(KERN_WARNING "%s: ERROR given dch is NULL\n",
- __func__);
+ printk(KERN_WARNING "%s: ERROR given dch is NULL\n", __func__);
return;
}
+ hc = dch->hw;
ch = dch->slot;
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
if (dch->dev.D.protocol == ISDN_P_TE_E1) {
if (debug & DEBUG_HFCMULTI_STATE)
printk(KERN_DEBUG
switch (dch->state) {
case (1):
if (hc->e1_state != 1) {
- for (i = 1; i <= 31; i++) {
- /* reset fifos on e1 activation */
- HFC_outb_nodebug(hc, R_FIFO, (i << 1) | 1);
- HFC_wait_nodebug(hc);
- HFC_outb_nodebug(hc,
- R_INC_RES_FIFO, V_RES_F);
- HFC_wait_nodebug(hc);
- }
+ for (i = 1; i <= 31; i++) {
+ /* reset fifos on e1 activation */
+ HFC_outb_nodebug(hc, R_FIFO,
+ (i << 1) | 1);
+ HFC_wait_nodebug(hc);
+ HFC_outb_nodebug(hc, R_INC_RES_FIFO,
+ V_RES_F);
+ HFC_wait_nodebug(hc);
+ }
}
test_and_set_bit(FLG_ACTIVE, &dch->Flags);
_queue_data(&dch->dev.D, PH_ACTIVATE_IND,
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: entered\n", __func__);
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
hc->chan[hc->dslot].slot_tx = -1;
hc->chan[hc->dslot].slot_rx = -1;
hc->chan[hc->dslot].conf = -1;
}
if (!test_bit(HFC_CFG_NONCAP_TX, &hc->chan[i].cfg))
hc->hw.a_st_ctrl0[pt] |= V_TX_LI;
+ if (hc->ctype == HFC_TYPE_XHFC) {
+ hc->hw.a_st_ctrl0[pt] |= 0x40 /* V_ST_PU_CTRL */;
+ HFC_outb(hc, 0x35 /* A_ST_CTRL3 */,
+ 0x7c << 1 /* V_ST_PULSE */);
+ }
/* line setup */
HFC_outb(hc, A_ST_CTRL0, hc->hw.a_st_ctrl0[pt]);
/* disable E-channel */
return -EINVAL;
if ((dch->dev.D.protocol != ISDN_P_NONE) &&
(dch->dev.D.protocol != rq->protocol)) {
- if (debug & DEBUG_HFCMULTI_MODE)
- printk(KERN_WARNING "%s: change protocol %x to %x\n",
- __func__, dch->dev.D.protocol, rq->protocol);
+ if (debug & DEBUG_HFCMULTI_MODE)
+ printk(KERN_DEBUG "%s: change protocol %x to %x\n",
+ __func__, dch->dev.D.protocol, rq->protocol);
}
- if ((dch->dev.D.protocol == ISDN_P_TE_S0)
- && (rq->protocol != ISDN_P_TE_S0))
+ if ((dch->dev.D.protocol == ISDN_P_TE_S0) &&
+ (rq->protocol != ISDN_P_TE_S0))
l1_event(dch->l1, CLOSE_CHANNEL);
if (dch->dev.D.protocol != rq->protocol) {
if (rq->protocol == ISDN_P_TE_S0) {
return -EINVAL;
if (rq->protocol == ISDN_P_NONE)
return -EINVAL;
- if (hc->type == 1)
+ if (hc->ctype == HFC_TYPE_E1)
ch = rq->adr.channel;
else
ch = (rq->adr.channel - 1) + (dch->slot - 2);
}
if (test_and_set_bit(FLG_OPEN, &bch->Flags))
return -EBUSY; /* b-channel can be only open once */
+ test_and_clear_bit(FLG_FILLEMPTY, &bch->Flags);
bch->ch.protocol = rq->protocol;
hc->chan[ch].rx_off = 0;
rq->ch = &bch->ch;
static int
channel_dctrl(struct dchannel *dch, struct mISDN_ctrl_req *cq)
{
+ struct hfc_multi *hc = dch->hw;
int ret = 0;
+ int wd_mode, wd_cnt;
switch (cq->op) {
case MISDN_CTRL_GETOP:
- cq->op = 0;
+ cq->op = MISDN_CTRL_HFC_OP;
+ break;
+ case MISDN_CTRL_HFC_WD_INIT: /* init the watchdog */
+ wd_cnt = cq->p1 & 0xf;
+ wd_mode = !!(cq->p1 >> 4);
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_INIT mode %s"
+ ", counter 0x%x\n", __func__,
+ wd_mode ? "AUTO" : "MANUAL", wd_cnt);
+ /* set the watchdog timer */
+ HFC_outb(hc, R_TI_WD, poll_timer | (wd_cnt << 4));
+ hc->hw.r_bert_wd_md = (wd_mode ? V_AUTO_WD_RES : 0);
+ if (hc->ctype == HFC_TYPE_XHFC)
+ hc->hw.r_bert_wd_md |= 0x40 /* V_WD_EN */;
+ /* init the watchdog register and reset the counter */
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
+ if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
+ /* enable the watchdog output for Speech-Design */
+ HFC_outb(hc, R_GPIO_SEL, V_GPIO_SEL7);
+ HFC_outb(hc, R_GPIO_EN1, V_GPIO_EN15);
+ HFC_outb(hc, R_GPIO_OUT1, 0);
+ HFC_outb(hc, R_GPIO_OUT1, V_GPIO_OUT15);
+ }
+ break;
+ case MISDN_CTRL_HFC_WD_RESET: /* reset the watchdog counter */
+ if (debug & DEBUG_HFCMULTI_MSG)
+ printk(KERN_DEBUG "%s: MISDN_CTRL_HFC_WD_RESET\n",
+ __func__);
+ HFC_outb(hc, R_BERT_WD_MD, hc->hw.r_bert_wd_md | V_WD_RES);
break;
default:
printk(KERN_WARNING "%s: unknown Op %x\n",
switch (rq->protocol) {
case ISDN_P_TE_S0:
case ISDN_P_NT_S0:
- if (hc->type == 1) {
+ if (hc->ctype == HFC_TYPE_E1) {
err = -EINVAL;
break;
}
break;
case ISDN_P_TE_E1:
case ISDN_P_NT_E1:
- if (hc->type != 1) {
+ if (hc->ctype != HFC_TYPE_E1) {
err = -EINVAL;
break;
}
return err;
}
+static int
+clockctl(void *priv, int enable)
+{
+ struct hfc_multi *hc = priv;
+
+ hc->iclock_on = enable;
+ return 0;
+}
+
/*
* initialize the card
*/
{
int err = -EIO;
u_long flags;
- u_short *plx_acc;
+ void __iomem *plx_acc;
u_long plx_flags;
if (debug & DEBUG_HFCMULTI_INIT)
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
- if (request_irq(hc->pci_dev->irq, hfcmulti_interrupt, IRQF_SHARED,
+ if (request_irq(hc->irq, hfcmulti_interrupt, IRQF_SHARED,
"HFC-multi", hc)) {
printk(KERN_WARNING "mISDN: Could not get interrupt %d.\n",
- hc->pci_dev->irq);
+ hc->irq);
+ hc->irq = 0;
return -EIO;
}
- hc->irq = hc->pci_dev->irq;
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+ plx_acc = hc->plx_membase + PLX_INTCSR;
writew((PLX_INTCSR_PCIINT_ENABLE | PLX_INTCSR_LINTI1_ENABLE),
plx_acc); /* enable PCI & LINT1 irq */
spin_unlock_irqrestore(&plx_lock, plx_flags);
error:
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
spin_lock_irqsave(&plx_lock, plx_flags);
- plx_acc = (u_short *)(hc->plx_membase+PLX_INTCSR);
+ plx_acc = hc->plx_membase + PLX_INTCSR;
writew(0x00, plx_acc); /*disable IRQs*/
spin_unlock_irqrestore(&plx_lock, plx_flags);
}
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: free irq %d\n", __func__, hc->irq);
+ printk(KERN_DEBUG "%s: free irq %d\n", __func__, hc->irq);
if (hc->irq) {
free_irq(hc->irq, hc);
hc->irq = 0;
hc->ledstate = 0xAFFEAFFE;
hc->opticalsupport = m->opticalsupport;
+ hc->pci_iobase = 0;
+ hc->pci_membase = NULL;
+ hc->plx_membase = NULL;
+
/* set memory access methods */
if (m->io_mode) /* use mode from card config */
hc->io_mode = m->io_mode;
case HFC_IO_MODE_PLXSD:
test_and_set_bit(HFC_CHIP_PLXSD, &hc->chip);
hc->slots = 128; /* required */
- /* fall through */
- case HFC_IO_MODE_PCIMEM:
hc->HFC_outb = HFC_outb_pcimem;
hc->HFC_inb = HFC_inb_pcimem;
hc->HFC_inw = HFC_inw_pcimem;
hc->HFC_wait = HFC_wait_pcimem;
hc->read_fifo = read_fifo_pcimem;
hc->write_fifo = write_fifo_pcimem;
- break;
- case HFC_IO_MODE_REGIO:
- hc->HFC_outb = HFC_outb_regio;
- hc->HFC_inb = HFC_inb_regio;
- hc->HFC_inw = HFC_inw_regio;
- hc->HFC_wait = HFC_wait_regio;
- hc->read_fifo = read_fifo_regio;
- hc->write_fifo = write_fifo_regio;
- break;
- default:
- printk(KERN_WARNING "HFC-multi: Invalid IO mode.\n");
- pci_disable_device(hc->pci_dev);
- return -EIO;
- }
- hc->HFC_outb_nodebug = hc->HFC_outb;
- hc->HFC_inb_nodebug = hc->HFC_inb;
- hc->HFC_inw_nodebug = hc->HFC_inw;
- hc->HFC_wait_nodebug = hc->HFC_wait;
-#ifdef HFC_REGISTER_DEBUG
- hc->HFC_outb = HFC_outb_debug;
- hc->HFC_inb = HFC_inb_debug;
- hc->HFC_inw = HFC_inw_debug;
- hc->HFC_wait = HFC_wait_debug;
-#endif
- hc->pci_iobase = 0;
- hc->pci_membase = NULL;
- hc->plx_membase = NULL;
-
- switch (hc->io_mode) {
- case HFC_IO_MODE_PLXSD:
hc->plx_origmembase = hc->pci_dev->resource[0].start;
/* MEMBASE 1 is PLX PCI Bridge */
pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
break;
case HFC_IO_MODE_PCIMEM:
+ hc->HFC_outb = HFC_outb_pcimem;
+ hc->HFC_inb = HFC_inb_pcimem;
+ hc->HFC_inw = HFC_inw_pcimem;
+ hc->HFC_wait = HFC_wait_pcimem;
+ hc->read_fifo = read_fifo_pcimem;
+ hc->write_fifo = write_fifo_pcimem;
hc->pci_origmembase = hc->pci_dev->resource[1].start;
if (!hc->pci_origmembase) {
printk(KERN_WARNING
pci_disable_device(hc->pci_dev);
return -EIO;
}
- printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ %d "
- "HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
+ printk(KERN_INFO "card %d: defined at MEMBASE %#lx (%#lx) IRQ "
+ "%d HZ %d leds-type %d\n", hc->id, (u_long)hc->pci_membase,
hc->pci_origmembase, hc->pci_dev->irq, HZ, hc->leds);
pci_write_config_word(hc->pci_dev, PCI_COMMAND, PCI_ENA_MEMIO);
break;
case HFC_IO_MODE_REGIO:
+ hc->HFC_outb = HFC_outb_regio;
+ hc->HFC_inb = HFC_inb_regio;
+ hc->HFC_inw = HFC_inw_regio;
+ hc->HFC_wait = HFC_wait_regio;
+ hc->read_fifo = read_fifo_regio;
+ hc->write_fifo = write_fifo_regio;
hc->pci_iobase = (u_int) hc->pci_dev->resource[0].start;
if (!hc->pci_iobase) {
printk(KERN_WARNING
dch->timer.function = NULL;
}
- if (hc->type == 1) { /* E1 */
+ if (hc->ctype == HFC_TYPE_E1) { /* E1 */
/* remove sync */
if (test_bit(HFC_CHIP_PLXSD, &hc->chip)) {
hc->syncronized = 0;
int ch;
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: release card (%d) entered\n",
+ printk(KERN_DEBUG "%s: release card (%d) entered\n",
__func__, hc->id);
+ /* unregister clock source */
+ if (hc->iclock)
+ mISDN_unregister_clock(hc->iclock);
+
+ /* disable irq */
spin_lock_irqsave(&hc->lock, flags);
disable_hwirq(hc);
spin_unlock_irqrestore(&hc->lock, flags);
-
udelay(1000);
/* dimm leds */
/* release hardware & irq */
if (hc->irq) {
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: free irq %d\n",
+ printk(KERN_DEBUG "%s: free irq %d\n",
__func__, hc->irq);
free_irq(hc->irq, hc);
hc->irq = 0;
release_io_hfcmulti(hc);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: remove instance from list\n",
+ printk(KERN_DEBUG "%s: remove instance from list\n",
__func__);
list_del(&hc->list);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: delete instance\n", __func__);
+ printk(KERN_DEBUG "%s: delete instance\n", __func__);
if (hc == syncmaster)
syncmaster = NULL;
kfree(hc);
if (debug & DEBUG_HFCMULTI_INIT)
- printk(KERN_WARNING "%s: card successfully removed\n",
+ printk(KERN_DEBUG "%s: card successfully removed\n",
__func__);
}
(1 << (ISDN_P_B_HDLC & ISDN_P_B_MASK));
dch->dev.D.send = handle_dmsg;
dch->dev.D.ctrl = hfcm_dctrl;
- dch->dev.nrbchan = (hc->dslot)?30:31;
+ dch->dev.nrbchan = (hc->dslot) ? 30 : 31;
dch->slot = hc->dslot;
hc->chan[hc->dslot].dch = dch;
hc->chan[hc->dslot].port = 0;
printk(KERN_ERR "%s: no memory for coeffs\n",
__func__);
ret = -ENOMEM;
+ kfree(bch);
goto free_chan;
}
bch->nr = ch;
} else
hc->chan[hc->dslot].jitter = 2; /* default */
snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-e1.%d", HFC_cnt + 1);
- ret = mISDN_register_device(&dch->dev, name);
+ ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
if (ret)
goto free_chan;
hc->created[0] = 1;
printk(KERN_ERR "%s: no memory for coeffs\n",
__func__);
ret = -ENOMEM;
+ kfree(bch);
goto free_chan;
}
bch->nr = ch + 1;
}
/* disable E-channel */
if (port[Port_cnt] & 0x004) {
- if (debug & DEBUG_HFCMULTI_INIT)
+ if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG
"%s: PROTOCOL disable E-channel: "
"card(%d) port(%d)\n",
test_and_set_bit(HFC_CFG_DIS_ECHANNEL,
&hc->chan[i + 2].cfg);
}
- snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d/%d",
- hc->type, HFC_cnt + 1, pt + 1);
- ret = mISDN_register_device(&dch->dev, name);
+ if (hc->ctype == HFC_TYPE_XHFC) {
+ snprintf(name, MISDN_MAX_IDLEN - 1, "xhfc.%d-%d",
+ HFC_cnt + 1, pt + 1);
+ ret = mISDN_register_device(&dch->dev, NULL, name);
+ } else {
+ snprintf(name, MISDN_MAX_IDLEN - 1, "hfc-%ds.%d-%d",
+ hc->ctype, HFC_cnt + 1, pt + 1);
+ ret = mISDN_register_device(&dch->dev, &hc->pci_dev->dev, name);
+ }
if (ret)
goto free_chan;
hc->created[pt] = 1;
}
static int
-hfcmulti_init(struct pci_dev *pdev, const struct pci_device_id *ent)
+hfcmulti_init(struct hm_map *m, struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- struct hm_map *m = (struct hm_map *)ent->driver_data;
int ret_err = 0;
int pt;
struct hfc_multi *hc;
u_long flags;
u_char dips = 0, pmj = 0; /* dip settings, port mode Jumpers */
+ int i;
if (HFC_cnt >= MAX_CARDS) {
printk(KERN_ERR "too many cards (max=%d).\n",
}
spin_lock_init(&hc->lock);
hc->mtyp = m;
- hc->type = m->type;
+ hc->ctype = m->type;
hc->ports = m->ports;
hc->id = HFC_cnt;
hc->pcm = pcm[HFC_cnt];
hc->io_mode = iomode[HFC_cnt];
- if (dslot[HFC_cnt] < 0) {
+ if (dslot[HFC_cnt] < 0 && hc->ctype == HFC_TYPE_E1) {
hc->dslot = 0;
printk(KERN_INFO "HFC-E1 card has disabled D-channel, but "
"31 B-channels\n");
- } if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32) {
+ }
+ if (dslot[HFC_cnt] > 0 && dslot[HFC_cnt] < 32
+ && hc->ctype == HFC_TYPE_E1) {
hc->dslot = dslot[HFC_cnt];
printk(KERN_INFO "HFC-E1 card has alternating D-channel on "
"time slot %d\n", dslot[HFC_cnt]);
hc->masterclk = -1;
if (type[HFC_cnt] & 0x100) {
test_and_set_bit(HFC_CHIP_ULAW, &hc->chip);
- silence = 0xff; /* ulaw silence */
+ hc->silence = 0xff; /* ulaw silence */
} else
- silence = 0x2a; /* alaw silence */
- if (!(type[HFC_cnt] & 0x200))
- test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+ hc->silence = 0x2a; /* alaw silence */
+ if ((poll >> 1) > sizeof(hc->silence_data)) {
+ printk(KERN_ERR "HFCMULTI error: silence_data too small, "
+ "please fix\n");
+ return -EINVAL;
+ }
+ for (i = 0; i < (poll >> 1); i++)
+ hc->silence_data[i] = hc->silence;
+
+ if (hc->ctype != HFC_TYPE_XHFC) {
+ if (!(type[HFC_cnt] & 0x200))
+ test_and_set_bit(HFC_CHIP_DTMF, &hc->chip);
+ test_and_set_bit(HFC_CHIP_CONF, &hc->chip);
+ }
if (type[HFC_cnt] & 0x800)
test_and_set_bit(HFC_CHIP_PCM_SLAVE, &hc->chip);
printk(KERN_NOTICE "Watchdog enabled\n");
}
- /* setup pci, hc->slots may change due to PLXSD */
- ret_err = setup_pci(hc, pdev, ent);
+ if (pdev && ent)
+ /* setup pci, hc->slots may change due to PLXSD */
+ ret_err = setup_pci(hc, pdev, ent);
+ else
+#ifdef CONFIG_MISDN_HFCMULTI_8xx
+ ret_err = setup_embedded(hc, m);
+#else
+ {
+ printk(KERN_WARNING "Embedded IO Mode not selected\n");
+ ret_err = -EIO;
+ }
+#endif
if (ret_err) {
if (hc == syncmaster)
syncmaster = NULL;
return ret_err;
}
- /* crate channels */
+ hc->HFC_outb_nodebug = hc->HFC_outb;
+ hc->HFC_inb_nodebug = hc->HFC_inb;
+ hc->HFC_inw_nodebug = hc->HFC_inw;
+ hc->HFC_wait_nodebug = hc->HFC_wait;
+#ifdef HFC_REGISTER_DEBUG
+ hc->HFC_outb = HFC_outb_debug;
+ hc->HFC_inb = HFC_inb_debug;
+ hc->HFC_inw = HFC_inw_debug;
+ hc->HFC_wait = HFC_wait_debug;
+#endif
+ /* create channels */
for (pt = 0; pt < hc->ports; pt++) {
if (Port_cnt >= MAX_PORTS) {
printk(KERN_ERR "too many ports (max=%d).\n",
ret_err = -EINVAL;
goto free_card;
}
- if (hc->type == 1)
+ if (hc->ctype == HFC_TYPE_E1)
ret_err = init_e1_port(hc, m);
else
ret_err = init_multi_port(hc, pt);
switch (m->dip_type) {
case DIP_4S:
/*
- * get DIP Setting for beroNet 1S/2S/4S cards
- * check if Port Jumper config matches
- * module param 'protocol'
+ * Get DIP setting for beroNet 1S/2S/4S cards
* DIP Setting: (collect GPIO 13/14/15 (R_GPIO_IN1) +
* GPI 19/23 (R_GPI_IN2))
*/
break;
case DIP_8S:
/*
- * get DIP Setting for beroNet 8S0+ cards
- *
- * enable PCI auxbridge function
+ * Get DIP Setting for beroNet 8S0+ cards
+ * Enable PCI auxbridge function
*/
HFC_outb(hc, R_BRG_PCM_CFG, 1 | V_PCM_CLK);
/* prepare access to auxport */
list_add_tail(&hc->list, &HFClist);
spin_unlock_irqrestore(&HFClock, flags);
+ /* use as clock source */
+ if (clock == HFC_cnt + 1)
+ hc->iclock = mISDN_register_clock("HFCMulti", 0, clockctl, hc);
+
/* initialize hardware */
+ hc->irq = (m->irq) ? : hc->pci_dev->irq;
ret_err = init_card(hc);
if (ret_err) {
printk(KERN_ERR "init card returns %d\n", ret_err);
spin_unlock_irqrestore(&HFClock, flags);
} else {
if (debug)
- printk(KERN_WARNING "%s: drvdata allready removed\n",
+ printk(KERN_DEBUG "%s: drvdata allready removed\n",
__func__);
}
}
#define VENDOR_PRIM "PrimuX"
static const struct hm_map hfcm_map[] = {
-/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0},
-/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0},
-/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0},
-/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0},
-/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0},
-/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0},
-/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO},
-/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0},
-/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0},
-/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0},
-
-/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0},
+/*0*/ {VENDOR_BN, "HFC-1S Card (mini PCI)", 4, 1, 1, 3, 0, DIP_4S, 0, 0},
+/*1*/ {VENDOR_BN, "HFC-2S Card", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*2*/ {VENDOR_BN, "HFC-2S Card (mini PCI)", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*3*/ {VENDOR_BN, "HFC-4S Card", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*4*/ {VENDOR_BN, "HFC-4S Card (mini PCI)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*5*/ {VENDOR_CCD, "HFC-4S Eval (old)", 4, 4, 0, 0, 0, 0, 0, 0},
+/*6*/ {VENDOR_CCD, "HFC-4S IOB4ST", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
+/*7*/ {VENDOR_CCD, "HFC-4S", 4, 4, 1, 2, 0, 0, 0, 0},
+/*8*/ {VENDOR_DIG, "HFC-4S Card", 4, 4, 0, 2, 0, 0, HFC_IO_MODE_REGIO, 0},
+/*9*/ {VENDOR_CCD, "HFC-4S Swyx 4xS0 SX2 QuadBri", 4, 4, 1, 2, 0, 0, 0, 0},
+/*10*/ {VENDOR_JH, "HFC-4S (junghanns 2.0)", 4, 4, 1, 2, 0, 0, 0, 0},
+/*11*/ {VENDOR_PRIM, "HFC-2S Primux Card", 4, 2, 0, 0, 0, 0, 0, 0},
+
+/*12*/ {VENDOR_BN, "HFC-8S Card", 8, 8, 1, 0, 0, 0, 0, 0},
/*13*/ {VENDOR_BN, "HFC-8S Card (+)", 8, 8, 1, 8, 0, DIP_8S,
- HFC_IO_MODE_REGIO},
-/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0},
-/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0},
+ HFC_IO_MODE_REGIO, 0},
+/*14*/ {VENDOR_CCD, "HFC-8S Eval (old)", 8, 8, 0, 0, 0, 0, 0, 0},
+/*15*/ {VENDOR_CCD, "HFC-8S IOB4ST Recording", 8, 8, 1, 0, 0, 0, 0, 0},
-/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0},
-/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
-/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0},
+/*16*/ {VENDOR_CCD, "HFC-8S IOB8ST", 8, 8, 1, 0, 0, 0, 0, 0},
+/*17*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
+/*18*/ {VENDOR_CCD, "HFC-8S", 8, 8, 1, 0, 0, 0, 0, 0},
-/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0},
-/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
-/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0},
+/*19*/ {VENDOR_BN, "HFC-E1 Card", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*20*/ {VENDOR_BN, "HFC-E1 Card (mini PCI)", 1, 1, 0, 1, 0, 0, 0, 0},
+/*21*/ {VENDOR_BN, "HFC-E1+ Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
+/*22*/ {VENDOR_BN, "HFC-E1 Card (Dual)", 1, 1, 0, 1, 0, DIP_E1, 0, 0},
-/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0},
-/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0},
-/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0},
+/*23*/ {VENDOR_CCD, "HFC-E1 Eval (old)", 1, 1, 0, 0, 0, 0, 0, 0},
+/*24*/ {VENDOR_CCD, "HFC-E1 IOB1E1", 1, 1, 0, 1, 0, 0, 0, 0},
+/*25*/ {VENDOR_CCD, "HFC-E1", 1, 1, 0, 1, 0, 0, 0, 0},
/*26*/ {VENDOR_CCD, "HFC-4S Speech Design", 4, 4, 0, 0, 0, 0,
- HFC_IO_MODE_PLXSD},
+ HFC_IO_MODE_PLXSD, 0},
/*27*/ {VENDOR_CCD, "HFC-E1 Speech Design", 1, 1, 0, 0, 0, 0,
- HFC_IO_MODE_PLXSD},
-/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0},
-/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0},
-/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0},
+ HFC_IO_MODE_PLXSD, 0},
+/*28*/ {VENDOR_CCD, "HFC-4S OpenVox", 4, 4, 1, 0, 0, 0, 0, 0},
+/*29*/ {VENDOR_CCD, "HFC-2S OpenVox", 4, 2, 1, 0, 0, 0, 0, 0},
+/*30*/ {VENDOR_CCD, "HFC-8S OpenVox", 8, 8, 1, 0, 0, 0, 0, 0},
+/*31*/ {VENDOR_CCD, "XHFC-4S Speech Design", 5, 4, 0, 0, 0, 0,
+ HFC_IO_MODE_EMBSD, XHFC_IRQ},
+/*32*/ {VENDOR_JH, "HFC-8S (junghanns)", 8, 8, 1, 0, 0, 0, 0, 0},
+/*33*/ {VENDOR_BN, "HFC-2S Beronet Card PCIe", 4, 2, 1, 3, 0, DIP_4S, 0, 0},
+/*34*/ {VENDOR_BN, "HFC-4S Beronet Card PCIe", 4, 4, 1, 2, 0, DIP_4S, 0, 0},
};
#undef H
PCI_SUBDEVICE_ID_CCD_OV4S, 0, 0, H(28)}, /* OpenVox 4 */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_OV2S, 0, 0, H(29)}, /* OpenVox 2 */
+ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+ 0xb761, 0, 0, H(33)}, /* BN2S PCIe */
+ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_VENDOR_ID_CCD,
+ 0xb762, 0, 0, H(34)}, /* BN4S PCIe */
/* Cards with HFC-8S Chip */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_DEVICE_ID_CCD_HFC8S, 0, 0, H(14)}, /* old Eval */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
- PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)},
- /* IOB8ST Recording */
+ PCI_SUBDEVICE_ID_CCD_IOB8STR, 0, 0, H(15)}, /* IOB8ST Recording */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_IOB8ST, 0, 0, H(16)}, /* IOB8ST */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_HFC8S, 0, 0, H(18)}, /* 8S */
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_OV8S, 0, 0, H(30)}, /* OpenVox 8 */
+ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_VENDOR_ID_CCD,
+ PCI_SUBDEVICE_ID_CCD_JH8S, 0, 0, H(32)}, /* Junganns 8S */
/* Cards with HFC-E1 Chip */
PCI_SUBDEVICE_ID_CCD_SPD4S, 0, 0, H(26)}, /* PLX PCI Bridge */
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, PCI_VENDOR_ID_CCD,
PCI_SUBDEVICE_ID_CCD_SPDE1, 0, 0, H(27)}, /* PLX PCI Bridge */
+
+ { PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFCE1, PCI_VENDOR_ID_CCD,
+ PCI_SUBDEVICE_ID_CCD_JHSE1, 0, 0, H(25)}, /* Junghanns E1 */
+
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC4S, PCI_ANY_ID, PCI_ANY_ID,
0, 0, 0},
{ PCI_VENDOR_ID_CCD, PCI_DEVICE_ID_CCD_HFC8S, PCI_ANY_ID, PCI_ANY_ID,
struct hm_map *m = (struct hm_map *)ent->driver_data;
int ret;
- if (m == NULL) {
- if (ent->vendor == PCI_VENDOR_ID_CCD)
- if (ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
- ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
- ent->device == PCI_DEVICE_ID_CCD_HFCE1)
- printk(KERN_ERR
- "unknown HFC multiport controller "
- "(vendor:%x device:%x subvendor:%x "
- "subdevice:%x) Please contact the "
- "driver maintainer for support.\n",
- ent->vendor, ent->device,
- ent->subvendor, ent->subdevice);
+ if (m == NULL && ent->vendor == PCI_VENDOR_ID_CCD && (
+ ent->device == PCI_DEVICE_ID_CCD_HFC4S ||
+ ent->device == PCI_DEVICE_ID_CCD_HFC8S ||
+ ent->device == PCI_DEVICE_ID_CCD_HFCE1)) {
+ printk(KERN_ERR
+ "Unknown HFC multiport controller (vendor:%04x device:%04x "
+ "subvendor:%04x subdevice:%04x)\n", pdev->vendor,
+ pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+ printk(KERN_ERR
+ "Please contact the driver maintainer for support.\n");
return -ENODEV;
}
- ret = hfcmulti_init(pdev, ent);
+ ret = hfcmulti_init(m, pdev, ent);
if (ret)
return ret;
HFC_cnt++;
{
struct hfc_multi *card, *next;
- /* unload interrupt function symbol */
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
-
+ /* get rid of all devices of this driver */
list_for_each_entry_safe(card, next, &HFClist, list)
release_card(card);
- /* get rid of all devices of this driver */
pci_unregister_driver(&hfcmultipci_driver);
}
HFCmulti_init(void)
{
int err;
+ int i, xhfc = 0;
+ struct hm_map m;
+
+ printk(KERN_INFO "mISDN: HFC-multi driver %s\n", HFC_MULTI_VERSION);
#ifdef IRQ_DEBUG
- printk(KERN_ERR "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
+ printk(KERN_DEBUG "%s: IRQ_DEBUG IS ENABLED!\n", __func__);
#endif
spin_lock_init(&HFClock);
if (debug & DEBUG_HFCMULTI_INIT)
printk(KERN_DEBUG "%s: init entered\n", __func__);
- hfc_interrupt = symbol_get(ztdummy_extern_interrupt);
- register_interrupt = symbol_get(ztdummy_register_interrupt);
- unregister_interrupt = symbol_get(ztdummy_unregister_interrupt);
- printk(KERN_INFO "mISDN: HFC-multi driver %s\n",
- hfcmulti_revision);
-
switch (poll) {
case 0:
poll_timer = 6;
poll = 128;
break;
- /*
- * wenn dieses break nochmal verschwindet,
- * gibt es heisse ohren :-)
- * "without the break you will get hot ears ???"
- */
case 8:
poll_timer = 2;
break;
}
+ if (!clock)
+ clock = 1;
+
+ /* Register the embedded devices.
+ * This should be done before the PCI cards registration */
+ switch (hwid) {
+ case HWID_MINIP4:
+ xhfc = 1;
+ m = hfcm_map[31];
+ break;
+ case HWID_MINIP8:
+ xhfc = 2;
+ m = hfcm_map[31];
+ break;
+ case HWID_MINIP16:
+ xhfc = 4;
+ m = hfcm_map[31];
+ break;
+ default:
+ xhfc = 0;
+ }
+
+ for (i = 0; i < xhfc; ++i) {
+ err = hfcmulti_init(&m, NULL, NULL);
+ if (err) {
+ printk(KERN_ERR "error registering embedded driver: "
+ "%x\n", err);
+ return err;
+ }
+ HFC_cnt++;
+ printk(KERN_INFO "%d devices registered\n", HFC_cnt);
+ }
+
+ /* Register the PCI cards */
err = pci_register_driver(&hfcmultipci_driver);
if (err < 0) {
printk(KERN_ERR "error registering pci driver: %x\n", err);
- if (hfc_interrupt)
- symbol_put(ztdummy_extern_interrupt);
- if (register_interrupt)
- symbol_put(ztdummy_register_interrupt);
- if (unregister_interrupt) {
- if (interrupt_registered) {
- interrupt_registered = 0;
- unregister_interrupt();
- }
- symbol_put(ztdummy_unregister_interrupt);
- }
return err;
}
+
return 0;
}
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff