* Documentation/ide/ChangeLog.ide-tape.1995-2002
*/
+#define DRV_NAME "ide-tape"
+
#define IDETAPE_VERSION "1.20"
#include <linux/module.h>
DBG_CHRDEV = (1 << 2),
/* all remaining procedures */
DBG_PROCS = (1 << 3),
- /* buffer alloc info (pc_stack & rq_stack) */
- DBG_PCRQ_STACK = (1 << 4),
};
/* define to see debug info */
#define IDETAPE_MAX_PC_RETRIES 3
/*
- * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE
- * bytes. This is used for several packet commands (Not for READ/WRITE commands)
- */
-#define IDETAPE_PC_BUFFER_SIZE 256
-
-/*
- * In various places in the driver, we need to allocate storage
- * for packet commands and requests, which will remain valid while
- * we leave the driver to wait for an interrupt or a timeout event.
- */
-#define IDETAPE_PC_STACK (10 + IDETAPE_MAX_PC_RETRIES)
-
-/*
- * Some drives (for example, Seagate STT3401A Travan) require a very long
- * timeout, because they don't return an interrupt or clear their busy bit
- * until after the command completes (even retension commands).
- */
-#define IDETAPE_WAIT_CMD (900*HZ)
-
-/*
* The following parameter is used to select the point in the internal tape fifo
* in which we will start to refill the buffer. Decreasing the following
* parameter will improve the system's latency and interactive response, while
IDETAPE_DIR_WRITE = (1 << 2),
};
-struct idetape_bh {
- u32 b_size;
- atomic_t b_count;
- struct idetape_bh *b_reqnext;
- char *b_data;
-};
-
/* Tape door status */
#define DOOR_UNLOCKED 0
#define DOOR_LOCKED 1
#define IDETAPE_LU_RETENSION_MASK 2
#define IDETAPE_LU_EOT_MASK 4
-/*
- * Special requests for our block device strategy routine.
- *
- * In order to service a character device command, we add special requests to
- * the tail of our block device request queue and wait for their completion.
- */
-
-enum {
- REQ_IDETAPE_PC1 = (1 << 0), /* packet command (first stage) */
- REQ_IDETAPE_PC2 = (1 << 1), /* packet command (second stage) */
- REQ_IDETAPE_READ = (1 << 2),
- REQ_IDETAPE_WRITE = (1 << 3),
-};
-
-/* Error codes returned in rq->errors to the higher part of the driver. */
-#define IDETAPE_ERROR_GENERAL 101
-#define IDETAPE_ERROR_FILEMARK 102
-#define IDETAPE_ERROR_EOD 103
-
/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */
#define IDETAPE_BLOCK_DESCRIPTOR 0
#define IDETAPE_CAPABILITIES_PAGE 0x2a
* to an interrupt or a timer event is stored in the struct defined below.
*/
typedef struct ide_tape_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
+ ide_drive_t *drive;
+ struct ide_driver *driver;
+ struct gendisk *disk;
+ struct device dev;
- /*
- * Since a typical character device operation requires more
- * than one packet command, we provide here enough memory
- * for the maximum of interconnected packet commands.
- * The packet commands are stored in the circular array pc_stack.
- * pc_stack_index points to the last used entry, and warps around
- * to the start when we get to the last array entry.
- *
- * pc points to the current processed packet command.
- *
- * failed_pc points to the last failed packet command, or contains
- * NULL if we do not need to retry any packet command. This is
- * required since an additional packet command is needed before the
- * retry, to get detailed information on what went wrong.
- */
- /* Current packet command */
- struct ide_atapi_pc *pc;
- /* Last failed packet command */
- struct ide_atapi_pc *failed_pc;
- /* Packet command stack */
- struct ide_atapi_pc pc_stack[IDETAPE_PC_STACK];
- /* Next free packet command storage space */
- int pc_stack_index;
- struct request rq_stack[IDETAPE_PC_STACK];
- /* We implement a circular array */
- int rq_stack_index;
+ /* used by REQ_IDETAPE_{READ,WRITE} requests */
+ struct ide_atapi_pc queued_pc;
/*
* DSC polling variables.
/* Data buffer size chosen based on the tape's recommendation */
int buffer_size;
- /* merge buffer */
- struct idetape_bh *merge_bh;
- /* size of the merge buffer */
- int merge_bh_size;
- /* pointer to current buffer head within the merge buffer */
- struct idetape_bh *bh;
- char *b_data;
- int b_count;
-
- int pages_per_buffer;
- /* Wasted space in each stage */
- int excess_bh_size;
-
- /* protects the ide-tape queue */
- spinlock_t lock;
+ /* Staging buffer of buffer_size bytes */
+ void *buf;
+ /* The read/write cursor */
+ void *cur;
+ /* The number of valid bytes in buf */
+ size_t valid;
/* Measures average tape speed */
unsigned long avg_time;
static struct class *idetape_sysfs_class;
-#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
-
-#define ide_tape_g(disk) \
- container_of((disk)->private_data, struct ide_tape_obj, driver)
-
-static void ide_tape_release(struct kref *);
+static void ide_tape_release(struct device *);
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
{
struct ide_tape_obj *tape = NULL;
mutex_lock(&idetape_ref_mutex);
- tape = ide_tape_g(disk);
+ tape = ide_drv_g(disk, ide_tape_obj);
if (tape) {
- kref_get(&tape->kref);
- if (ide_device_get(tape->drive)) {
- kref_put(&tape->kref, ide_tape_release);
+ if (ide_device_get(tape->drive))
tape = NULL;
- }
+ else
+ get_device(&tape->dev);
}
mutex_unlock(&idetape_ref_mutex);
return tape;
static void ide_tape_put(struct ide_tape_obj *tape)
{
+ ide_drive_t *drive = tape->drive;
+
mutex_lock(&idetape_ref_mutex);
- ide_device_put(tape->drive);
- kref_put(&tape->kref, ide_tape_release);
+ put_device(&tape->dev);
+ ide_device_put(drive);
mutex_unlock(&idetape_ref_mutex);
}
*/
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-#define ide_tape_f(file) ((file)->private_data)
-
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
{
struct ide_tape_obj *tape = NULL;
mutex_lock(&idetape_ref_mutex);
tape = idetape_devs[i];
if (tape)
- kref_get(&tape->kref);
+ get_device(&tape->dev);
mutex_unlock(&idetape_ref_mutex);
return tape;
}
-static void idetape_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
-
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in "
- "idetape_input_buffers\n");
- ide_pad_transfer(drive, 0, bcount);
- return;
- }
- count = min(
- (unsigned int)(bh->b_size - atomic_read(&bh->b_count)),
- bcount);
- drive->hwif->tp_ops->input_data(drive, NULL, bh->b_data +
- atomic_read(&bh->b_count), count);
- bcount -= count;
- atomic_add(count, &bh->b_count);
- if (atomic_read(&bh->b_count) == bh->b_size) {
- bh = bh->b_reqnext;
- if (bh)
- atomic_set(&bh->b_count, 0);
- }
- }
- pc->bh = bh;
-}
-
-static void idetape_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
-
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return;
- }
- count = min((unsigned int)pc->b_count, (unsigned int)bcount);
- drive->hwif->tp_ops->output_data(drive, NULL, pc->b_data, count);
- bcount -= count;
- pc->b_data += count;
- pc->b_count -= count;
- if (!pc->b_count) {
- bh = bh->b_reqnext;
- pc->bh = bh;
- if (bh) {
- pc->b_data = bh->b_data;
- pc->b_count = atomic_read(&bh->b_count);
- }
- }
- }
-}
-
-static void idetape_update_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct idetape_bh *bh = pc->bh;
- int count;
- unsigned int bcount = pc->xferred;
-
- if (pc->flags & PC_FLAG_WRITING)
- return;
- while (bcount) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return;
- }
- count = min((unsigned int)bh->b_size, (unsigned int)bcount);
- atomic_set(&bh->b_count, count);
- if (atomic_read(&bh->b_count) == bh->b_size)
- bh = bh->b_reqnext;
- bcount -= count;
- }
- pc->bh = bh;
-}
-
-/*
- * idetape_next_pc_storage returns a pointer to a place in which we can
- * safely store a packet command, even though we intend to leave the
- * driver. A storage space for a maximum of IDETAPE_PC_STACK packet
- * commands is allocated at initialization time.
- */
-static struct ide_atapi_pc *idetape_next_pc_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index);
-
- if (tape->pc_stack_index == IDETAPE_PC_STACK)
- tape->pc_stack_index = 0;
- return (&tape->pc_stack[tape->pc_stack_index++]);
-}
-
-/*
- * idetape_next_rq_storage is used along with idetape_next_pc_storage.
- * Since we queue packet commands in the request queue, we need to
- * allocate a request, along with the allocation of a packet command.
- */
-
-/**************************************************************
- * *
- * This should get fixed to use kmalloc(.., GFP_ATOMIC) *
- * followed later on by kfree(). -ml *
- * *
- **************************************************************/
-
-static struct request *idetape_next_rq_storage(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index);
-
- if (tape->rq_stack_index == IDETAPE_PC_STACK)
- tape->rq_stack_index = 0;
- return (&tape->rq_stack[tape->rq_stack_index++]);
-}
-
/*
* called on each failed packet command retry to analyze the request sense. We
* currently do not utilize this information.
static void idetape_analyze_error(ide_drive_t *drive, u8 *sense)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->failed_pc;
+ struct ide_atapi_pc *pc = drive->failed_pc;
tape->sense_key = sense[2] & 0xF;
tape->asc = sense[12];
pc->c[0], tape->sense_key, tape->asc, tape->ascq);
/* Correct pc->xferred by asking the tape. */
- if (pc->flags & PC_FLAG_DMA_ERROR) {
+ if (pc->flags & PC_FLAG_DMA_ERROR)
pc->xferred = pc->req_xfer -
tape->blk_size *
get_unaligned_be32(&sense[3]);
- idetape_update_buffers(drive, pc);
- }
/*
* If error was the result of a zero-length read or write command,
}
}
if (pc->c[0] == READ_6 && (sense[2] & 0x80)) {
- pc->error = IDETAPE_ERROR_FILEMARK;
+ pc->error = IDE_DRV_ERROR_FILEMARK;
pc->flags |= PC_FLAG_ABORT;
}
if (pc->c[0] == WRITE_6) {
if ((sense[2] & 0x40) || (tape->sense_key == 0xd
&& tape->asc == 0x0 && tape->ascq == 0x2)) {
- pc->error = IDETAPE_ERROR_EOD;
+ pc->error = IDE_DRV_ERROR_EOD;
pc->flags |= PC_FLAG_ABORT;
}
}
if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
if (tape->sense_key == 8) {
- pc->error = IDETAPE_ERROR_EOD;
+ pc->error = IDE_DRV_ERROR_EOD;
pc->flags |= PC_FLAG_ABORT;
}
if (!(pc->flags & PC_FLAG_ABORT) &&
}
}
-/* Free data buffers completely. */
-static void ide_tape_kfree_buffer(idetape_tape_t *tape)
-{
- struct idetape_bh *prev_bh, *bh = tape->merge_bh;
-
- while (bh) {
- u32 size = bh->b_size;
-
- while (size) {
- unsigned int order = fls(size >> PAGE_SHIFT)-1;
-
- if (bh->b_data)
- free_pages((unsigned long)bh->b_data, order);
+static void ide_tape_handle_dsc(ide_drive_t *);
- size &= (order-1);
- bh->b_data += (1 << order) * PAGE_SIZE;
- }
- prev_bh = bh;
- bh = bh->b_reqnext;
- kfree(prev_bh);
- }
-}
-
-static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
-{
- struct request *rq = HWGROUP(drive)->rq;
- idetape_tape_t *tape = drive->driver_data;
- unsigned long flags;
- int error;
-
- debug_log(DBG_PROCS, "Enter %s\n", __func__);
-
- switch (uptodate) {
- case 0: error = IDETAPE_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
- }
- rq->errors = error;
- if (error)
- tape->failed_pc = NULL;
-
- if (!blk_special_request(rq)) {
- ide_end_request(drive, uptodate, nr_sects);
- return 0;
- }
-
- spin_lock_irqsave(&tape->lock, flags);
-
- ide_end_drive_cmd(drive, 0, 0);
-
- spin_unlock_irqrestore(&tape->lock, flags);
- return 0;
-}
-
-static void ide_tape_callback(ide_drive_t *drive)
+static int ide_tape_callback(ide_drive_t *drive, int dsc)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
+ struct request *rq = drive->hwif->rq;
int uptodate = pc->error ? 0 : 1;
+ int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- if (tape->failed_pc == pc)
- tape->failed_pc = NULL;
+ if (dsc)
+ ide_tape_handle_dsc(drive);
+
+ if (drive->failed_pc == pc)
+ drive->failed_pc = NULL;
if (pc->c[0] == REQUEST_SENSE) {
if (uptodate)
printk(KERN_ERR "ide-tape: Error in REQUEST SENSE "
"itself - Aborting request!\n");
} else if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) {
- struct request *rq = drive->hwif->hwgroup->rq;
int blocks = pc->xferred / tape->blk_size;
tape->avg_size += blocks * tape->blk_size;
}
tape->first_frame += blocks;
- rq->current_nr_sectors -= blocks;
+ rq->resid_len = rq->data_len - blocks * tape->blk_size;
- if (pc->error)
- uptodate = pc->error;
+ if (pc->error) {
+ uptodate = 0;
+ err = pc->error;
+ }
} else if (pc->c[0] == READ_POSITION && uptodate) {
- u8 *readpos = tape->pc->buf;
+ u8 *readpos = pc->buf;
debug_log(DBG_SENSE, "BOP - %s\n",
(readpos[0] & 0x80) ? "Yes" : "No");
"to the tape\n");
clear_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
uptodate = 0;
+ err = IDE_DRV_ERROR_GENERAL;
} else {
debug_log(DBG_SENSE, "Block Location - %u\n",
- be32_to_cpu(*(u32 *)&readpos[4]));
+ be32_to_cpup((__be32 *)&readpos[4]));
tape->partition = readpos[1];
- tape->first_frame = be32_to_cpu(*(u32 *)&readpos[4]);
+ tape->first_frame = be32_to_cpup((__be32 *)&readpos[4]);
set_bit(IDE_AFLAG_ADDRESS_VALID, &drive->atapi_flags);
}
}
- idetape_end_request(drive, uptodate, 0);
-}
-
-static void idetape_init_pc(struct ide_atapi_pc *pc)
-{
- memset(pc->c, 0, 12);
- pc->retries = 0;
- pc->flags = 0;
- pc->req_xfer = 0;
- pc->buf = pc->pc_buf;
- pc->buf_size = IDETAPE_PC_BUFFER_SIZE;
- pc->bh = NULL;
- pc->b_data = NULL;
-}
-
-static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- idetape_init_pc(pc);
- pc->c[0] = REQUEST_SENSE;
- pc->c[4] = 20;
- pc->req_xfer = 20;
-}
-
-static void idetape_init_rq(struct request *rq, u8 cmd)
-{
- blk_rq_init(NULL, rq);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = cmd;
-}
-
-/*
- * Generate a new packet command request in front of the request queue, before
- * the current request, so that it will be processed immediately, on the next
- * pass through the driver. The function below is called from the request
- * handling part of the driver (the "bottom" part). Safe storage for the request
- * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that.
- *
- * Memory for those requests is pre-allocated at initialization time, and is
- * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for
- * the maximum possible number of inter-dependent packet commands.
- *
- * The higher level of the driver - The ioctl handler and the character device
- * handling functions should queue request to the lower level part and wait for
- * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail.
- */
-static void idetape_queue_pc_head(ide_drive_t *drive, struct ide_atapi_pc *pc,
- struct request *rq)
-{
- struct ide_tape_obj *tape = drive->driver_data;
-
- idetape_init_rq(rq, REQ_IDETAPE_PC1);
- rq->cmd_flags |= REQ_PREEMPT;
- rq->buffer = (char *) pc;
- rq->rq_disk = tape->disk;
- memcpy(rq->cmd, pc->c, 12);
- ide_do_drive_cmd(drive, rq);
-}
-
-/*
- * idetape_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
- */
-static void idetape_retry_pc(ide_drive_t *drive)
-{
- struct ide_atapi_pc *pc;
- struct request *rq;
+ rq->errors = err;
- (void)ide_read_error(drive);
- pc = idetape_next_pc_storage(drive);
- rq = idetape_next_rq_storage(drive);
- idetape_create_request_sense_cmd(pc);
- set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- idetape_queue_pc_head(drive, pc, rq);
+ return uptodate;
}
/*
* Postpone the current request so that ide.c will be able to service requests
- * from another device on the same hwgroup while we are polling for DSC.
+ * from another device on the same port while we are polling for DSC.
*/
static void idetape_postpone_request(ide_drive_t *drive)
{
debug_log(DBG_PROCS, "Enter %s\n", __func__);
- tape->postponed_rq = HWGROUP(drive)->rq;
+ tape->postponed_rq = drive->hwif->rq;
+
ide_stall_queue(drive, tape->dsc_poll_freq);
}
idetape_postpone_request(drive);
}
-static void ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount, int write)
-{
- if (write)
- idetape_output_buffers(drive, pc, bcount);
- else
- idetape_input_buffers(drive, pc, bcount);
-}
-
-/*
- * This is the usual interrupt handler which will be called during a packet
- * command. We will transfer some of the data (as requested by the drive) and
- * will re-point interrupt handler to us. When data transfer is finished, we
- * will act according to the algorithm described before
- * idetape_issue_pc.
- */
-static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, IDETAPE_WAIT_CMD,
- NULL, idetape_update_buffers, idetape_retry_pc,
- ide_tape_handle_dsc, ide_tape_io_buffers);
-}
-
/*
* Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not change
+ * The current Packet Command is available in drive->pc, and will not change
* until we finish handling it. Each packet command is associated with a
* callback function that will be called when the command is finished.
*
* The handling will be done in three stages:
*
- * 1. idetape_issue_pc will send the packet command to the drive, and will set
- * the interrupt handler to idetape_pc_intr.
+ * 1. ide_tape_issue_pc will send the packet command to the drive, and will set
+ * the interrupt handler to ide_pc_intr.
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * 2. On each interrupt, ide_pc_intr will be called. This step will be
* repeated until the device signals us that no more interrupts will be issued.
*
* 3. ATAPI Tape media access commands have immediate status with a delayed
* again, the callback function will be called and then we will handle the next
* request.
*/
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
- return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- IDETAPE_WAIT_CMD, NULL);
-}
-
-static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
- struct ide_atapi_pc *pc)
+static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
+ struct ide_cmd *cmd,
+ struct ide_atapi_pc *pc)
{
idetape_tape_t *tape = drive->driver_data;
- if (tape->pc->c[0] == REQUEST_SENSE &&
- pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
- "Two request sense in serial were issued\n");
- }
+ if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
+ drive->failed_pc = pc;
- if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
- tape->failed_pc = pc;
/* Set the current packet command */
- tape->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
+ unsigned int done = blk_rq_bytes(drive->hwif->rq);
+
/*
* We will "abort" retrying a packet command in case legitimate
* error code was received (crossing a filemark, or end of the
tape->ascq);
}
/* Giving up */
- pc->error = IDETAPE_ERROR_GENERAL;
+ pc->error = IDE_DRV_ERROR_GENERAL;
}
- tape->failed_pc = NULL;
- drive->pc_callback(drive);
+
+ drive->failed_pc = NULL;
+ drive->pc_callback(drive, 0);
+ ide_complete_rq(drive, -EIO, done);
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
- return ide_issue_pc(drive, pc, idetape_transfer_pc,
- IDETAPE_WAIT_CMD, NULL);
+ return ide_issue_pc(drive, cmd);
}
/* A mode sense command is used to "sense" tape parameters. */
static void idetape_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = MODE_SENSE;
if (page_code != IDETAPE_BLOCK_DESCRIPTOR)
/* DBD = 1 - Don't return block descriptors */
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
u8 stat;
stat = hwif->tp_ops->read_status(hwif);
- if (stat & SEEK_STAT) {
- if (stat & ERR_STAT) {
+ if (stat & ATA_DSC) {
+ if (stat & ATA_ERR) {
/* Error detected */
if (pc->c[0] != TEST_UNIT_READY)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
- idetape_retry_pc(drive);
+ ide_retry_pc(drive);
return ide_stopped;
}
pc->error = 0;
} else {
- pc->error = IDETAPE_ERROR_GENERAL;
- tape->failed_pc = NULL;
+ pc->error = IDE_DRV_ERROR_GENERAL;
+ drive->failed_pc = NULL;
}
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
struct ide_atapi_pc *pc, struct request *rq,
u8 opcode)
{
- struct idetape_bh *bh = (struct idetape_bh *)rq->special;
- unsigned int length = rq->current_nr_sectors;
+ unsigned int length = rq->nr_sectors;
- idetape_init_pc(pc);
+ ide_init_pc(pc);
put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]);
pc->c[1] = 1;
- pc->bh = bh;
pc->buf = NULL;
pc->buf_size = length * tape->blk_size;
pc->req_xfer = pc->buf_size;
if (pc->req_xfer == tape->buffer_size)
pc->flags |= PC_FLAG_DMA_OK;
- if (opcode == READ_6) {
+ if (opcode == READ_6)
pc->c[0] = READ_6;
- atomic_set(&bh->b_count, 0);
- } else if (opcode == WRITE_6) {
+ else if (opcode == WRITE_6) {
pc->c[0] = WRITE_6;
pc->flags |= PC_FLAG_WRITING;
- pc->b_data = bh->b_data;
- pc->b_count = atomic_read(&bh->b_count);
}
memcpy(rq->cmd, pc->c, 12);
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc *pc = NULL;
struct request *postponed_rq = tape->postponed_rq;
+ struct ide_cmd cmd;
u8 stat;
- debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld,"
- " current_nr_sectors: %d\n",
- rq->sector, rq->nr_sectors, rq->current_nr_sectors);
+ debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %lu\n"
+ (unsigned long long)rq->sector, rq->nr_sectors);
- if (!blk_special_request(rq)) {
+ if (!(blk_special_request(rq) || blk_sense_request(rq))) {
/* We do not support buffer cache originated requests. */
printk(KERN_NOTICE "ide-tape: %s: Unsupported request in "
"request queue (%d)\n", drive->name, rq->cmd_type);
- ide_end_request(drive, 0, 0);
+ if (blk_fs_request(rq) == 0 && rq->errors == 0)
+ rq->errors = -EIO;
+ ide_complete_rq(drive, -EIO, ide_rq_bytes(rq));
return ide_stopped;
}
/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
- pc = tape->failed_pc;
+ if (drive->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
+ pc = drive->failed_pc;
goto out;
}
if (rq != postponed_rq) {
printk(KERN_ERR "ide-tape: ide-tape.c bug - "
"Two DSC requests were queued\n");
- idetape_end_request(drive, 0, 0);
+ drive->failed_pc = NULL;
+ rq->errors = 0;
+ ide_complete_rq(drive, 0, blk_rq_bytes(rq));
return ide_stopped;
}
*/
stat = hwif->tp_ops->read_status(hwif);
- if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
+ if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
+ (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- if (drive->post_reset == 1) {
+ if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- drive->post_reset = 0;
+ drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
- (stat & SEEK_STAT) == 0) {
+ (stat & ATA_DSC) == 0) {
if (postponed_rq == NULL) {
tape->dsc_polling_start = jiffies;
tape->dsc_poll_freq = tape->best_dsc_rw_freq;
return ide_stopped;
}
if (rq->cmd[13] & REQ_IDETAPE_READ) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, READ_6);
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_WRITE) {
- pc = idetape_next_pc_storage(drive);
+ pc = &tape->queued_pc;
ide_tape_create_rw_cmd(tape, pc, rq, WRITE_6);
goto out;
}
if (rq->cmd[13] & REQ_IDETAPE_PC1) {
- pc = (struct ide_atapi_pc *) rq->buffer;
+ pc = (struct ide_atapi_pc *)rq->special;
rq->cmd[13] &= ~(REQ_IDETAPE_PC1);
rq->cmd[13] |= REQ_IDETAPE_PC2;
goto out;
BUG();
out:
- return idetape_issue_pc(drive, pc);
-}
+ /* prepare sense request for this command */
+ ide_prep_sense(drive, rq);
-/*
- * The function below uses __get_free_pages to allocate a data buffer of size
- * tape->buffer_size (or a bit more). We attempt to combine sequential pages as
- * much as possible.
- *
- * It returns a pointer to the newly allocated buffer, or NULL in case of
- * failure.
- */
-static struct idetape_bh *ide_tape_kmalloc_buffer(idetape_tape_t *tape,
- int full, int clear)
-{
- struct idetape_bh *prev_bh, *bh, *merge_bh;
- int pages = tape->pages_per_buffer;
- unsigned int order, b_allocd;
- char *b_data = NULL;
-
- merge_bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
- bh = merge_bh;
- if (bh == NULL)
- goto abort;
-
- order = fls(pages) - 1;
- bh->b_data = (char *) __get_free_pages(GFP_KERNEL, order);
- if (!bh->b_data)
- goto abort;
- b_allocd = (1 << order) * PAGE_SIZE;
- pages &= (order-1);
-
- if (clear)
- memset(bh->b_data, 0, b_allocd);
- bh->b_reqnext = NULL;
- bh->b_size = b_allocd;
- atomic_set(&bh->b_count, full ? bh->b_size : 0);
-
- while (pages) {
- order = fls(pages) - 1;
- b_data = (char *) __get_free_pages(GFP_KERNEL, order);
- if (!b_data)
- goto abort;
- b_allocd = (1 << order) * PAGE_SIZE;
-
- if (clear)
- memset(b_data, 0, b_allocd);
-
- /* newly allocated page frames below buffer header or ...*/
- if (bh->b_data == b_data + b_allocd) {
- bh->b_size += b_allocd;
- bh->b_data -= b_allocd;
- if (full)
- atomic_add(b_allocd, &bh->b_count);
- continue;
- }
- /* they are above the header */
- if (b_data == bh->b_data + bh->b_size) {
- bh->b_size += b_allocd;
- if (full)
- atomic_add(b_allocd, &bh->b_count);
- continue;
- }
- prev_bh = bh;
- bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL);
- if (!bh) {
- free_pages((unsigned long) b_data, order);
- goto abort;
- }
- bh->b_reqnext = NULL;
- bh->b_data = b_data;
- bh->b_size = b_allocd;
- atomic_set(&bh->b_count, full ? bh->b_size : 0);
- prev_bh->b_reqnext = bh;
-
- pages &= (order-1);
- }
-
- bh->b_size -= tape->excess_bh_size;
- if (full)
- atomic_sub(tape->excess_bh_size, &bh->b_count);
- return merge_bh;
-abort:
- ide_tape_kfree_buffer(tape);
- return NULL;
-}
+ memset(&cmd, 0, sizeof(cmd));
-static int idetape_copy_stage_from_user(idetape_tape_t *tape,
- const char __user *buf, int n)
-{
- struct idetape_bh *bh = tape->bh;
- int count;
- int ret = 0;
-
- while (n) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return 1;
- }
- count = min((unsigned int)
- (bh->b_size - atomic_read(&bh->b_count)),
- (unsigned int)n);
- if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf,
- count))
- ret = 1;
- n -= count;
- atomic_add(count, &bh->b_count);
- buf += count;
- if (atomic_read(&bh->b_count) == bh->b_size) {
- bh = bh->b_reqnext;
- if (bh)
- atomic_set(&bh->b_count, 0);
- }
- }
- tape->bh = bh;
- return ret;
-}
+ if (rq_data_dir(rq))
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
-static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf,
- int n)
-{
- struct idetape_bh *bh = tape->bh;
- int count;
- int ret = 0;
-
- while (n) {
- if (bh == NULL) {
- printk(KERN_ERR "ide-tape: bh == NULL in %s\n",
- __func__);
- return 1;
- }
- count = min(tape->b_count, n);
- if (copy_to_user(buf, tape->b_data, count))
- ret = 1;
- n -= count;
- tape->b_data += count;
- tape->b_count -= count;
- buf += count;
- if (!tape->b_count) {
- bh = bh->b_reqnext;
- tape->bh = bh;
- if (bh) {
- tape->b_data = bh->b_data;
- tape->b_count = atomic_read(&bh->b_count);
- }
- }
- }
- return ret;
-}
+ cmd.rq = rq;
-static void idetape_init_merge_buffer(idetape_tape_t *tape)
-{
- struct idetape_bh *bh = tape->merge_bh;
- tape->bh = tape->merge_bh;
+ ide_init_sg_cmd(&cmd, pc->req_xfer);
+ ide_map_sg(drive, &cmd);
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE)
- atomic_set(&bh->b_count, 0);
- else {
- tape->b_data = bh->b_data;
- tape->b_count = atomic_read(&bh->b_count);
- }
+ return ide_tape_issue_pc(drive, &cmd, pc);
}
/*
static void idetape_create_write_filemark_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, int write_filemark)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = WRITE_FILEMARKS;
pc->c[4] = write_filemark;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-static void idetape_create_test_unit_ready_cmd(struct ide_atapi_pc *pc)
-{
- idetape_init_pc(pc);
- pc->c[0] = TEST_UNIT_READY;
-}
-
-/*
- * We add a special packet command request to the tail of the request queue, and
- * wait for it to be serviced. This is not to be called from within the request
- * handling part of the driver! We allocate here data on the stack and it is
- * valid until the request is finished. This is not the case for the bottom part
- * of the driver, where we are always leaving the functions to wait for an
- * interrupt or a timer event.
- *
- * From the bottom part of the driver, we should allocate safe memory using
- * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request
- * to the request list without waiting for it to be serviced! In that case, we
- * usually use idetape_queue_pc_head().
- */
-static int idetape_queue_pc_tail(ide_drive_t *drive, struct ide_atapi_pc *pc)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq;
- int error;
-
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_SPECIAL;
- rq->cmd[13] = REQ_IDETAPE_PC1;
- rq->buffer = (char *)pc;
- memcpy(rq->cmd, pc->c, 12);
- error = blk_execute_rq(drive->queue, tape->disk, rq, 0);
- blk_put_request(rq);
- return error;
-}
-
-static void idetape_create_load_unload_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int cmd)
-{
- idetape_init_pc(pc);
- pc->c[0] = START_STOP;
- pc->c[4] = cmd;
- pc->flags |= PC_FLAG_WAIT_FOR_DSC;
-}
-
static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc pc;
+ struct gendisk *disk = tape->disk;
int load_attempted = 0;
/* Wait for the tape to become ready */
set_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
timeout += jiffies;
while (time_before(jiffies, timeout)) {
- idetape_create_test_unit_ready_cmd(&pc);
- if (!idetape_queue_pc_tail(drive, &pc))
+ if (ide_do_test_unit_ready(drive, disk) == 0)
return 0;
if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2)
|| (tape->asc == 0x3A)) {
/* no media */
if (load_attempted)
return -ENOMEDIUM;
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- idetape_queue_pc_tail(drive, &pc);
+ ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
load_attempted = 1;
/* not about to be ready */
} else if (!(tape->sense_key == 2 && tape->asc == 4 &&
static int idetape_flush_tape_buffers(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;
int rc;
idetape_create_write_filemark_cmd(drive, &pc, 0);
- rc = idetape_queue_pc_tail(drive, &pc);
+ rc = ide_queue_pc_tail(drive, tape->disk, &pc);
if (rc)
return rc;
idetape_wait_ready(drive, 60 * 5 * HZ);
static void idetape_create_read_position_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = READ_POSITION;
pc->req_xfer = 20;
}
debug_log(DBG_PROCS, "Enter %s\n", __func__);
idetape_create_read_position_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc))
+ if (ide_queue_pc_tail(drive, tape->disk, &pc))
return -1;
position = tape->first_frame;
return position;
struct ide_atapi_pc *pc,
unsigned int block, u8 partition, int skip)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = POSITION_TO_ELEMENT;
pc->c[1] = 2;
put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]);
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-static int idetape_create_prevent_cmd(ide_drive_t *drive,
- struct ide_atapi_pc *pc, int prevent)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- /* device supports locking according to capabilities page */
- if (!(tape->caps[6] & 0x01))
- return 0;
-
- idetape_init_pc(pc);
- pc->c[0] = ALLOW_MEDIUM_REMOVAL;
- pc->c[4] = prevent;
- return 1;
-}
-
static void __ide_tape_discard_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
return;
clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags);
- tape->merge_bh_size = 0;
- if (tape->merge_bh != NULL) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ tape->valid = 0;
+ if (tape->buf != NULL) {
+ kfree(tape->buf);
+ tape->buf = NULL;
}
tape->chrdev_dir = IDETAPE_DIR_NONE;
u8 partition, int skip)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;
__ide_tape_discard_merge_buffer(drive);
idetape_wait_ready(drive, 60 * 5 * HZ);
idetape_create_locate_cmd(drive, &pc, block, partition, skip);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return (retval);
idetape_create_read_position_cmd(&pc);
- return (idetape_queue_pc_tail(drive, &pc));
+ return ide_queue_pc_tail(drive, disk, &pc);
}
static void ide_tape_discard_merge_buffer(ide_drive_t *drive,
* Generate a read/write request for the block device interface and wait for it
* to be serviced.
*/
-static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks,
- struct idetape_bh *bh)
+static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size)
{
idetape_tape_t *tape = drive->driver_data;
struct request *rq;
- int ret, errors;
+ int ret;
debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd);
+ BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE);
+ BUG_ON(size < 0 || size % tape->blk_size);
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd[13] = cmd;
rq->rq_disk = tape->disk;
- rq->special = (void *)bh;
- rq->sector = tape->first_frame;
- rq->nr_sectors = blocks;
- rq->current_nr_sectors = blocks;
- blk_execute_rq(drive->queue, tape->disk, rq, 0);
- errors = rq->errors;
- ret = tape->blk_size * (blocks - rq->current_nr_sectors);
- blk_put_request(rq);
+ if (size) {
+ ret = blk_rq_map_kern(drive->queue, rq, tape->buf, size,
+ __GFP_WAIT);
+ if (ret)
+ goto out_put;
+ }
- if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0)
- return 0;
+ blk_execute_rq(drive->queue, tape->disk, rq, 0);
- if (tape->merge_bh)
- idetape_init_merge_buffer(tape);
- if (errors == IDETAPE_ERROR_GENERAL)
- return -EIO;
+ /* calculate the number of transferred bytes and update buffer state */
+ size -= rq->resid_len;
+ tape->cur = tape->buf;
+ if (cmd == REQ_IDETAPE_READ)
+ tape->valid = size;
+ else
+ tape->valid = 0;
+
+ ret = size;
+ if (rq->errors == IDE_DRV_ERROR_GENERAL)
+ ret = -EIO;
+out_put:
+ blk_put_request(rq);
return ret;
}
static void idetape_create_inquiry_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = INQUIRY;
pc->c[4] = 254;
pc->req_xfer = 254;
static void idetape_create_rewind_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = REZERO_UNIT;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
static void idetape_create_erase_cmd(struct ide_atapi_pc *pc)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = ERASE;
pc->c[1] = 1;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
static void idetape_create_space_cmd(struct ide_atapi_pc *pc, int count, u8 cmd)
{
- idetape_init_pc(pc);
+ ide_init_pc(pc);
pc->c[0] = SPACE;
put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]);
pc->c[1] = cmd;
pc->flags |= PC_FLAG_WAIT_FOR_DSC;
}
-/* Queue up a character device originated write request. */
-static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- debug_log(DBG_CHRDEV, "Enter %s\n", __func__);
-
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
- blocks, tape->merge_bh);
-}
-
static void ide_tape_flush_merge_buffer(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
- int blocks, min;
- struct idetape_bh *bh;
if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
printk(KERN_ERR "ide-tape: bug: Trying to empty merge buffer"
" but we are not writing.\n");
return;
}
- if (tape->merge_bh_size > tape->buffer_size) {
- printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n");
- tape->merge_bh_size = tape->buffer_size;
- }
- if (tape->merge_bh_size) {
- blocks = tape->merge_bh_size / tape->blk_size;
- if (tape->merge_bh_size % tape->blk_size) {
- unsigned int i;
-
- blocks++;
- i = tape->blk_size - tape->merge_bh_size %
- tape->blk_size;
- bh = tape->bh->b_reqnext;
- while (bh) {
- atomic_set(&bh->b_count, 0);
- bh = bh->b_reqnext;
- }
- bh = tape->bh;
- while (i) {
- if (bh == NULL) {
- printk(KERN_INFO "ide-tape: bug,"
- " bh NULL\n");
- break;
- }
- min = min(i, (unsigned int)(bh->b_size -
- atomic_read(&bh->b_count)));
- memset(bh->b_data + atomic_read(&bh->b_count),
- 0, min);
- atomic_add(min, &bh->b_count);
- i -= min;
- bh = bh->b_reqnext;
- }
- }
- (void) idetape_add_chrdev_write_request(drive, blocks);
- tape->merge_bh_size = 0;
- }
- if (tape->merge_bh != NULL) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ if (tape->buf) {
+ size_t aligned = roundup(tape->valid, tape->blk_size);
+
+ memset(tape->cur, 0, aligned - tape->valid);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, aligned);
+ kfree(tape->buf);
+ tape->buf = NULL;
}
tape->chrdev_dir = IDETAPE_DIR_NONE;
}
-static int idetape_init_read(ide_drive_t *drive)
+static int idetape_init_rw(ide_drive_t *drive, int dir)
{
idetape_tape_t *tape = drive->driver_data;
- int bytes_read;
-
- /* Initialize read operation */
- if (tape->chrdev_dir != IDETAPE_DIR_READ) {
- if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
- ide_tape_flush_merge_buffer(drive);
- idetape_flush_tape_buffers(drive);
- }
- if (tape->merge_bh || tape->merge_bh_size) {
- printk(KERN_ERR "ide-tape: merge_bh_size should be"
- " 0 now\n");
- tape->merge_bh_size = 0;
- }
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
- if (!tape->merge_bh)
- return -ENOMEM;
- tape->chrdev_dir = IDETAPE_DIR_READ;
+ int rc;
- /*
- * Issue a read 0 command to ensure that DSC handshake is
- * switched from completion mode to buffer available mode.
- * No point in issuing this if DSC overlap isn't supported, some
- * drives (Seagate STT3401A) will return an error.
- */
- if (drive->dsc_overlap) {
- bytes_read = idetape_queue_rw_tail(drive,
- REQ_IDETAPE_READ, 0,
- tape->merge_bh);
- if (bytes_read < 0) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
- return bytes_read;
- }
- }
- }
+ BUG_ON(dir != IDETAPE_DIR_READ && dir != IDETAPE_DIR_WRITE);
- return 0;
-}
+ if (tape->chrdev_dir == dir)
+ return 0;
-/* called from idetape_chrdev_read() to service a chrdev read request. */
-static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks)
-{
- idetape_tape_t *tape = drive->driver_data;
+ if (tape->chrdev_dir == IDETAPE_DIR_READ)
+ ide_tape_discard_merge_buffer(drive, 1);
+ else if (tape->chrdev_dir == IDETAPE_DIR_WRITE) {
+ ide_tape_flush_merge_buffer(drive);
+ idetape_flush_tape_buffers(drive);
+ }
- debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks);
+ if (tape->buf || tape->valid) {
+ printk(KERN_ERR "ide-tape: valid should be 0 now\n");
+ tape->valid = 0;
+ }
- /* If we are at a filemark, return a read length of 0 */
- if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
- return 0;
+ tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+ if (!tape->buf)
+ return -ENOMEM;
+ tape->chrdev_dir = dir;
+ tape->cur = tape->buf;
- idetape_init_read(drive);
+ /*
+ * Issue a 0 rw command to ensure that DSC handshake is
+ * switched from completion mode to buffer available mode. No
+ * point in issuing this if DSC overlap isn't supported, some
+ * drives (Seagate STT3401A) will return an error.
+ */
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
+ int cmd = dir == IDETAPE_DIR_READ ? REQ_IDETAPE_READ
+ : REQ_IDETAPE_WRITE;
+
+ rc = idetape_queue_rw_tail(drive, cmd, 0);
+ if (rc < 0) {
+ kfree(tape->buf);
+ tape->buf = NULL;
+ tape->chrdev_dir = IDETAPE_DIR_NONE;
+ return rc;
+ }
+ }
- return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks,
- tape->merge_bh);
+ return 0;
}
static void idetape_pad_zeros(ide_drive_t *drive, int bcount)
{
idetape_tape_t *tape = drive->driver_data;
- struct idetape_bh *bh;
- int blocks;
+
+ memset(tape->buf, 0, tape->buffer_size);
while (bcount) {
- unsigned int count;
+ unsigned int count = min(tape->buffer_size, bcount);
- bh = tape->merge_bh;
- count = min(tape->buffer_size, bcount);
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, count);
bcount -= count;
- blocks = count / tape->blk_size;
- while (count) {
- atomic_set(&bh->b_count,
- min(count, (unsigned int)bh->b_size));
- memset(bh->b_data, 0, atomic_read(&bh->b_count));
- count -= atomic_read(&bh->b_count);
- bh = bh->b_reqnext;
- }
- idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks,
- tape->merge_bh);
}
}
*/
static int idetape_rewind_tape(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
int retval;
struct ide_atapi_pc pc;
- idetape_tape_t *tape;
- tape = drive->driver_data;
debug_log(DBG_SENSE, "Enter %s\n", __func__);
idetape_create_rewind_cmd(drive, &pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;
idetape_create_read_position_cmd(&pc);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_queue_pc_tail(drive, disk, &pc);
if (retval)
return retval;
return 0;
int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int retval, count = 0;
int sprev = !!(tape->caps[4] & 0x20);
}
if (tape->chrdev_dir == IDETAPE_DIR_READ) {
- tape->merge_bh_size = 0;
+ tape->valid = 0;
if (test_and_clear_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
++count;
ide_tape_discard_merge_buffer(drive, 0);
case MTBSF:
idetape_create_space_cmd(&pc, mt_count - count,
IDETAPE_SPACE_OVER_FILEMARK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTFSFM:
case MTBSFM:
if (!sprev)
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
- ssize_t bytes_read, temp, actually_read = 0, rc;
+ size_t done = 0;
ssize_t ret = 0;
- u16 ctl = *(u16 *)&tape->caps[12];
+ int rc;
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
(count % tape->blk_size) == 0)
tape->user_bs_factor = count / tape->blk_size;
}
- rc = idetape_init_read(drive);
+
+ rc = idetape_init_rw(drive, IDETAPE_DIR_READ);
if (rc < 0)
return rc;
- if (count == 0)
- return (0);
- if (tape->merge_bh_size) {
- actually_read = min((unsigned int)(tape->merge_bh_size),
- (unsigned int)count);
- if (idetape_copy_stage_to_user(tape, buf, actually_read))
- ret = -EFAULT;
- buf += actually_read;
- tape->merge_bh_size -= actually_read;
- count -= actually_read;
- }
- while (count >= tape->buffer_size) {
- bytes_read = idetape_add_chrdev_read_request(drive, ctl);
- if (bytes_read <= 0)
- goto finish;
- if (idetape_copy_stage_to_user(tape, buf, bytes_read))
- ret = -EFAULT;
- buf += bytes_read;
- count -= bytes_read;
- actually_read += bytes_read;
- }
- if (count) {
- bytes_read = idetape_add_chrdev_read_request(drive, ctl);
- if (bytes_read <= 0)
- goto finish;
- temp = min((unsigned long)count, (unsigned long)bytes_read);
- if (idetape_copy_stage_to_user(tape, buf, temp))
+
+ while (done < count) {
+ size_t todo;
+
+ /* refill if staging buffer is empty */
+ if (!tape->valid) {
+ /* If we are at a filemark, nothing more to read */
+ if (test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags))
+ break;
+ /* read */
+ if (idetape_queue_rw_tail(drive, REQ_IDETAPE_READ,
+ tape->buffer_size) <= 0)
+ break;
+ }
+
+ /* copy out */
+ todo = min_t(size_t, count - done, tape->valid);
+ if (copy_to_user(buf + done, tape->cur, todo))
ret = -EFAULT;
- actually_read += temp;
- tape->merge_bh_size = bytes_read-temp;
+
+ tape->cur += todo;
+ tape->valid -= todo;
+ done += todo;
}
-finish:
- if (!actually_read && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
+
+ if (!done && test_bit(IDE_AFLAG_FILEMARK, &drive->atapi_flags)) {
debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name);
idetape_space_over_filemarks(drive, MTFSF, 1);
return 0;
}
- return ret ? ret : actually_read;
+ return ret ? ret : done;
}
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
- ssize_t actually_written = 0;
+ size_t done = 0;
ssize_t ret = 0;
- u16 ctl = *(u16 *)&tape->caps[12];
+ int rc;
/* The drive is write protected. */
if (tape->write_prot)
debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count);
/* Initialize write operation */
- if (tape->chrdev_dir != IDETAPE_DIR_WRITE) {
- if (tape->chrdev_dir == IDETAPE_DIR_READ)
- ide_tape_discard_merge_buffer(drive, 1);
- if (tape->merge_bh || tape->merge_bh_size) {
- printk(KERN_ERR "ide-tape: merge_bh_size "
- "should be 0 now\n");
- tape->merge_bh_size = 0;
- }
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 0, 0);
- if (!tape->merge_bh)
- return -ENOMEM;
- tape->chrdev_dir = IDETAPE_DIR_WRITE;
- idetape_init_merge_buffer(tape);
+ rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE);
+ if (rc < 0)
+ return rc;
- /*
- * Issue a write 0 command to ensure that DSC handshake is
- * switched from completion mode to buffer available mode. No
- * point in issuing this if DSC overlap isn't supported, some
- * drives (Seagate STT3401A) will return an error.
- */
- if (drive->dsc_overlap) {
- ssize_t retval = idetape_queue_rw_tail(drive,
- REQ_IDETAPE_WRITE, 0,
- tape->merge_bh);
- if (retval < 0) {
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
- tape->chrdev_dir = IDETAPE_DIR_NONE;
- return retval;
- }
- }
- }
- if (count == 0)
- return (0);
- if (tape->merge_bh_size) {
- if (tape->merge_bh_size >= tape->buffer_size) {
- printk(KERN_ERR "ide-tape: bug: merge buf too big\n");
- tape->merge_bh_size = 0;
- }
- actually_written = min((unsigned int)
- (tape->buffer_size - tape->merge_bh_size),
- (unsigned int)count);
- if (idetape_copy_stage_from_user(tape, buf, actually_written))
- ret = -EFAULT;
- buf += actually_written;
- tape->merge_bh_size += actually_written;
- count -= actually_written;
-
- if (tape->merge_bh_size == tape->buffer_size) {
- ssize_t retval;
- tape->merge_bh_size = 0;
- retval = idetape_add_chrdev_write_request(drive, ctl);
- if (retval <= 0)
- return (retval);
- }
- }
- while (count >= tape->buffer_size) {
- ssize_t retval;
- if (idetape_copy_stage_from_user(tape, buf, tape->buffer_size))
- ret = -EFAULT;
- buf += tape->buffer_size;
- count -= tape->buffer_size;
- retval = idetape_add_chrdev_write_request(drive, ctl);
- actually_written += tape->buffer_size;
- if (retval <= 0)
- return (retval);
- }
- if (count) {
- actually_written += count;
- if (idetape_copy_stage_from_user(tape, buf, count))
+ while (done < count) {
+ size_t todo;
+
+ /* flush if staging buffer is full */
+ if (tape->valid == tape->buffer_size &&
+ idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE,
+ tape->buffer_size) <= 0)
+ return rc;
+
+ /* copy in */
+ todo = min_t(size_t, count - done,
+ tape->buffer_size - tape->valid);
+ if (copy_from_user(tape->cur, buf + done, todo))
ret = -EFAULT;
- tape->merge_bh_size += count;
+
+ tape->cur += todo;
+ tape->valid += todo;
+ done += todo;
}
- return ret ? ret : actually_written;
+
+ return ret ? ret : done;
}
static int idetape_write_filemark(ide_drive_t *drive)
{
+ struct ide_tape_obj *tape = drive->driver_data;
struct ide_atapi_pc pc;
/* Write a filemark */
idetape_create_write_filemark_cmd(drive, &pc, 1);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Couldn't write a filemark\n");
return -EIO;
}
static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
{
idetape_tape_t *tape = drive->driver_data;
+ struct gendisk *disk = tape->disk;
struct ide_atapi_pc pc;
int i, retval;
return 0;
case MTLOAD:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_do_start_stop(drive, disk, IDETAPE_LU_LOAD_MASK);
case MTUNLOAD:
case MTOFFL:
/*
* attempting to eject.
*/
if (tape->door_locked) {
- if (idetape_create_prevent_cmd(drive, &pc, 0))
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
+ if (!ide_set_media_lock(drive, disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
- !IDETAPE_LU_LOAD_MASK);
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_do_start_stop(drive, disk, !IDETAPE_LU_LOAD_MASK);
if (!retval)
clear_bit(IDE_AFLAG_MEDIUM_PRESENT, &drive->atapi_flags);
return retval;
return idetape_flush_tape_buffers(drive);
case MTRETEN:
ide_tape_discard_merge_buffer(drive, 0);
- idetape_create_load_unload_cmd(drive, &pc,
+ return ide_do_start_stop(drive, disk,
IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK);
- return idetape_queue_pc_tail(drive, &pc);
case MTEOM:
idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTERASE:
(void)idetape_rewind_tape(drive);
idetape_create_erase_cmd(&pc);
- return idetape_queue_pc_tail(drive, &pc);
+ return ide_queue_pc_tail(drive, disk, &pc);
case MTSETBLK:
if (mt_count) {
if (mt_count < tape->blk_size ||
case MTFSR:
case MTBSR:
case MTLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 1))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 1);
if (retval)
return retval;
tape->door_locked = DOOR_EXPLICITLY_LOCKED;
return 0;
case MTUNLOCK:
- if (!idetape_create_prevent_cmd(drive, &pc, 0))
- return 0;
- retval = idetape_queue_pc_tail(drive, &pc);
+ retval = ide_set_media_lock(drive, disk, 0);
if (retval)
return retval;
tape->door_locked = DOOR_UNLOCKED;
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
struct mtop mtop;
struct mtget mtget;
idetape_flush_tape_buffers(drive);
}
if (cmd == MTIOCGET || cmd == MTIOCPOS) {
- block_offset = tape->merge_bh_size /
+ block_offset = tape->valid /
(tape->blk_size * tape->user_bs_factor);
position = idetape_read_position(drive);
if (position < 0)
struct ide_atapi_pc pc;
idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get block descriptor\n");
if (tape->blk_size == 0) {
printk(KERN_WARNING "ide-tape: Cannot deal with zero "
unsigned int minor = iminor(inode), i = minor & ~0xc0;
ide_drive_t *drive;
idetape_tape_t *tape;
- struct ide_atapi_pc pc;
int retval;
if (i >= MAX_HWIFS * MAX_DRIVES)
/* Lock the tape drive door so user can't eject. */
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
- if (idetape_create_prevent_cmd(drive, &pc, 1)) {
- if (!idetape_queue_pc_tail(drive, &pc)) {
- if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
- tape->door_locked = DOOR_LOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 1)) {
+ if (tape->door_locked != DOOR_EXPLICITLY_LOCKED)
+ tape->door_locked = DOOR_LOCKED;
}
}
unlock_kernel();
idetape_tape_t *tape = drive->driver_data;
ide_tape_flush_merge_buffer(drive);
- tape->merge_bh = ide_tape_kmalloc_buffer(tape, 1, 0);
- if (tape->merge_bh != NULL) {
+ tape->buf = kmalloc(tape->buffer_size, GFP_KERNEL);
+ if (tape->buf != NULL) {
idetape_pad_zeros(drive, tape->blk_size *
(tape->user_bs_factor - 1));
- ide_tape_kfree_buffer(tape);
- tape->merge_bh = NULL;
+ kfree(tape->buf);
+ tape->buf = NULL;
}
idetape_write_filemark(drive);
idetape_flush_tape_buffers(drive);
static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
- struct ide_tape_obj *tape = ide_tape_f(filp);
+ struct ide_tape_obj *tape = filp->private_data;
ide_drive_t *drive = tape->drive;
- struct ide_atapi_pc pc;
unsigned int minor = iminor(inode);
lock_kernel();
(void) idetape_rewind_tape(drive);
if (tape->chrdev_dir == IDETAPE_DIR_NONE) {
if (tape->door_locked == DOOR_LOCKED) {
- if (idetape_create_prevent_cmd(drive, &pc, 0)) {
- if (!idetape_queue_pc_tail(drive, &pc))
- tape->door_locked = DOOR_UNLOCKED;
- }
+ if (!ide_set_media_lock(drive, tape->disk, 0))
+ tape->door_locked = DOOR_UNLOCKED;
}
}
clear_bit(IDE_AFLAG_BUSY, &drive->atapi_flags);
return 0;
}
-/*
- * check the contents of the ATAPI IDENTIFY command results. We return:
- *
- * 1 - If the tape can be supported by us, based on the information we have so
- * far.
- *
- * 0 - If this tape driver is not currently supported by us.
- */
-static int idetape_identify_device(ide_drive_t *drive)
-{
- u8 gcw[2], protocol, device_type, removable, packet_size;
-
- if (drive->id_read == 0)
- return 1;
-
- *((unsigned short *) &gcw) = drive->id->config;
-
- protocol = (gcw[1] & 0xC0) >> 6;
- device_type = gcw[1] & 0x1F;
- removable = !!(gcw[0] & 0x80);
- packet_size = gcw[0] & 0x3;
-
- /* Check that we can support this device */
- if (protocol != 2)
- printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n",
- protocol);
- else if (device_type != 1)
- printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set "
- "to tape\n", device_type);
- else if (!removable)
- printk(KERN_ERR "ide-tape: The removable flag is not set\n");
- else if (packet_size != 0) {
- printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12"
- " bytes\n", packet_size);
- } else
- return 1;
- return 0;
-}
-
static void idetape_get_inquiry_results(ide_drive_t *drive)
{
idetape_tape_t *tape = drive->driver_data;
struct ide_atapi_pc pc;
- char fw_rev[6], vendor_id[10], product_id[18];
+ u8 pc_buf[256];
+ char fw_rev[4], vendor_id[8], product_id[16];
idetape_create_inquiry_cmd(&pc);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ pc.buf = &pc_buf[0];
+ pc.buf_size = sizeof(pc_buf);
+
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n",
tape->name);
return;
memcpy(product_id, &pc.buf[16], 16);
memcpy(fw_rev, &pc.buf[32], 4);
- ide_fixstring(vendor_id, 10, 0);
- ide_fixstring(product_id, 18, 0);
- ide_fixstring(fw_rev, 6, 0);
+ ide_fixstring(vendor_id, 8, 0);
+ ide_fixstring(product_id, 16, 0);
+ ide_fixstring(fw_rev, 4, 0);
- printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n",
+ printk(KERN_INFO "ide-tape: %s <-> %s: %.8s %.16s rev %.4s\n",
drive->name, tape->name, vendor_id, product_id, fw_rev);
}
u8 speed, max_speed;
idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE);
- if (idetape_queue_pc_tail(drive, &pc)) {
+ if (ide_queue_pc_tail(drive, tape->disk, &pc)) {
printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming"
" some default values\n");
tape->blk_size = 512;
caps = pc.buf + 4 + pc.buf[3];
/* convert to host order and save for later use */
- speed = be16_to_cpu(*(u16 *)&caps[14]);
- max_speed = be16_to_cpu(*(u16 *)&caps[8]);
+ speed = be16_to_cpup((__be16 *)&caps[14]);
+ max_speed = be16_to_cpup((__be16 *)&caps[8]);
- put_unaligned(max_speed, (u16 *)&caps[8]);
- put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]);
- put_unaligned(speed, (u16 *)&caps[14]);
- put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]);
+ *(u16 *)&caps[8] = max_speed;
+ *(u16 *)&caps[12] = be16_to_cpup((__be16 *)&caps[12]);
+ *(u16 *)&caps[14] = speed;
+ *(u16 *)&caps[16] = be16_to_cpup((__be16 *)&caps[16]);
if (!speed) {
printk(KERN_INFO "ide-tape: %s: invalid tape speed "
"(assuming 650KB/sec)\n", drive->name);
- put_unaligned(650, (u16 *)&caps[14]);
+ *(u16 *)&caps[14] = 650;
}
if (!max_speed) {
printk(KERN_INFO "ide-tape: %s: invalid max_speed "
"(assuming 650KB/sec)\n", drive->name);
- put_unaligned(650, (u16 *)&caps[8]);
+ *(u16 *)&caps[8] = 650;
}
memcpy(&tape->caps, caps, 20);
+
+ /* device lacks locking support according to capabilities page */
+ if ((caps[6] & 1) == 0)
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
+
if (caps[7] & 0x02)
tape->blk_size = 512;
else if (caps[7] & 0x04)
}
#ifdef CONFIG_IDE_PROC_FS
-static void idetape_add_settings(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 2, (u16 *)&tape->caps[16], NULL);
- ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff,
- 1, 1, (u16 *)&tape->caps[14], NULL);
- ide_add_setting(drive, "buffer_size", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1024, &tape->buffer_size, NULL);
- ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN,
- IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq,
- NULL);
- ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1,
- 1, &drive->dsc_overlap, NULL);
- ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff,
- 1, 1, &tape->avg_speed, NULL);
- ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1,
- 1, &tape->debug_mask, NULL);
-}
-#else
-static inline void idetape_add_settings(ide_drive_t *drive) { ; }
+#define ide_tape_devset_get(name, field) \
+static int get_##name(ide_drive_t *drive) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ return tape->field; \
+}
+
+#define ide_tape_devset_set(name, field) \
+static int set_##name(ide_drive_t *drive, int arg) \
+{ \
+ idetape_tape_t *tape = drive->driver_data; \
+ tape->field = arg; \
+ return 0; \
+}
+
+#define ide_tape_devset_rw_field(_name, _field) \
+ide_tape_devset_get(_name, _field) \
+ide_tape_devset_set(_name, _field) \
+IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
+
+#define ide_tape_devset_r_field(_name, _field) \
+ide_tape_devset_get(_name, _field) \
+IDE_DEVSET(_name, 0, get_##_name, NULL)
+
+static int mulf_tdsc(ide_drive_t *drive) { return 1000; }
+static int divf_tdsc(ide_drive_t *drive) { return HZ; }
+static int divf_buffer(ide_drive_t *drive) { return 2; }
+static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
+
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
+
+ide_tape_devset_rw_field(debug_mask, debug_mask);
+ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
+
+ide_tape_devset_r_field(avg_speed, avg_speed);
+ide_tape_devset_r_field(speed, caps[14]);
+ide_tape_devset_r_field(buffer, caps[16]);
+ide_tape_devset_r_field(buffer_size, buffer_size);
+
+static const struct ide_proc_devset idetape_settings[] = {
+ __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer),
+ __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size),
+ __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL),
+ __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL),
+ __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
+ mulf_tdsc, divf_tdsc),
+ { NULL },
+};
#endif
/*
unsigned long t;
int speed;
int buffer_size;
- u8 gcw[2];
u16 *ctl = (u16 *)&tape->caps[12];
- drive->pc_callback = ide_tape_callback;
+ drive->pc_callback = ide_tape_callback;
+
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
- spin_lock_init(&tape->lock);
- drive->dsc_overlap = 1;
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
tape->name);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
+
/* Seagate Travan drives do not support DSC overlap. */
- if (strstr(drive->id->model, "Seagate STT3401"))
- drive->dsc_overlap = 0;
+ if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- tape->pc = tape->pc_stack;
- *((unsigned short *) &gcw) = drive->id->config;
-
- /* Command packet DRQ type */
- if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
tape->buffer_size = *ctl * tape->blk_size;
}
buffer_size = tape->buffer_size;
- tape->pages_per_buffer = buffer_size / PAGE_SIZE;
- if (buffer_size % PAGE_SIZE) {
- tape->pages_per_buffer++;
- tape->excess_bh_size = PAGE_SIZE - buffer_size % PAGE_SIZE;
- }
/* select the "best" DSC read/write polling freq */
speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]);
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
tape->buffer_size / 1024,
tape->best_dsc_rw_freq * 1000 / HZ,
- drive->using_dma ? ", DMA":"");
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
- idetape_add_settings(drive);
+ ide_proc_register_driver(drive, tape->driver);
}
static void ide_tape_remove(ide_drive_t *drive)
idetape_tape_t *tape = drive->driver_data;
ide_proc_unregister_driver(drive, tape->driver);
-
+ device_del(&tape->dev);
ide_unregister_region(tape->disk);
- ide_tape_put(tape);
+ mutex_lock(&idetape_ref_mutex);
+ put_device(&tape->dev);
+ mutex_unlock(&idetape_ref_mutex);
}
-static void ide_tape_release(struct kref *kref)
+static void ide_tape_release(struct device *dev)
{
- struct ide_tape_obj *tape = to_ide_tape(kref);
+ struct ide_tape_obj *tape = to_ide_drv(dev, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
- BUG_ON(tape->merge_bh_size);
+ BUG_ON(tape->valid);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
device_destroy(idetape_sysfs_class,
{ "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL },
{ NULL, 0, NULL, NULL }
};
+
+static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
+{
+ return idetape_proc;
+}
+
+static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
+{
+ return idetape_settings;
+}
#endif
static int ide_tape_probe(ide_drive_t *);
-static ide_driver_t idetape_driver = {
+static struct ide_driver idetape_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-tape",
.probe = ide_tape_probe,
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
- .media = ide_tape,
- .supports_dsc_overlap = 1,
.do_request = idetape_do_request,
- .end_request = idetape_end_request,
- .error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idetape_proc,
+ .proc_entries = ide_tape_proc_entries,
+ .proc_devsets = ide_tape_proc_devsets,
#endif
};
.release = idetape_chrdev_release,
};
-static int idetape_open(struct inode *inode, struct file *filp)
+static int idetape_open(struct block_device *bdev, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape;
+ struct ide_tape_obj *tape = ide_tape_get(bdev->bd_disk);
- tape = ide_tape_get(disk);
if (!tape)
return -ENXIO;
return 0;
}
-static int idetape_release(struct inode *inode, struct file *filp)
+static int idetape_release(struct gendisk *disk, fmode_t mode)
{
- struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape = ide_tape_g(disk);
+ struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
ide_tape_put(tape);
-
return 0;
}
-static int idetape_ioctl(struct inode *inode, struct file *file,
+static int idetape_ioctl(struct block_device *bdev, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
- struct block_device *bdev = inode->i_bdev;
- struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk);
+ struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
- int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+ int err = generic_ide_ioctl(drive, bdev, cmd, arg);
if (err == -EINVAL)
err = idetape_blkdev_ioctl(drive, cmd, arg);
return err;
.owner = THIS_MODULE,
.open = idetape_open,
.release = idetape_release,
- .ioctl = idetape_ioctl,
+ .locked_ioctl = idetape_ioctl,
};
static int ide_tape_probe(ide_drive_t *drive)
if (!strstr("ide-tape", drive->driver_req))
goto failed;
- if (!drive->present)
- goto failed;
+
if (drive->media != ide_tape)
goto failed;
- if (!idetape_identify_device(drive)) {
+
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
+ ide_check_atapi_device(drive, DRV_NAME) == 0) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
ide_init_disk(g, drive);
- ide_proc_register_driver(drive, &idetape_driver);
+ tape->dev.parent = &drive->gendev;
+ tape->dev.release = ide_tape_release;
+ dev_set_name(&tape->dev, dev_name(&drive->gendev));
- kref_init(&tape->kref);
+ if (device_register(&tape->dev))
+ goto out_free_disk;
tape->drive = drive;
tape->driver = &idetape_driver;
idetape_setup(drive, tape, minor);
- device_create_drvdata(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor), NULL,
- "%s", tape->name);
- device_create_drvdata(idetape_sysfs_class, &drive->gendev,
- MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
- "n%s", tape->name);
+ device_create(idetape_sysfs_class, &drive->gendev,
+ MKDEV(IDETAPE_MAJOR, minor), NULL, "%s", tape->name);
+ device_create(idetape_sysfs_class, &drive->gendev,
+ MKDEV(IDETAPE_MAJOR, minor + 128), NULL,
+ "n%s", tape->name);
g->fops = &idetape_block_ops;
ide_register_region(g);
return 0;
+out_free_disk:
+ put_disk(g);
out_free_tape:
kfree(tape);
failed:
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff