-#include <linux/config.h>
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/blkpg.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/bitops.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-/*
- * IDE library routines. These are plug in code that most
- * drivers can use but occasionally may be weird enough
- * to want to do their own thing with
- *
- * Add common non I/O op stuff here. Make sure it has proper
- * kernel-doc function headers or your patch will be rejected
- */
-
-
-/**
- * ide_xfer_verbose - return IDE mode names
- * @xfer_rate: rate to name
- *
- * Returns a constant string giving the name of the mode
- * requested.
- */
-
-char *ide_xfer_verbose (u8 xfer_rate)
-{
- switch(xfer_rate) {
- case XFER_UDMA_7: return("UDMA 7");
- case XFER_UDMA_6: return("UDMA 6");
- case XFER_UDMA_5: return("UDMA 5");
- case XFER_UDMA_4: return("UDMA 4");
- case XFER_UDMA_3: return("UDMA 3");
- case XFER_UDMA_2: return("UDMA 2");
- case XFER_UDMA_1: return("UDMA 1");
- case XFER_UDMA_0: return("UDMA 0");
- case XFER_MW_DMA_2: return("MW DMA 2");
- case XFER_MW_DMA_1: return("MW DMA 1");
- case XFER_MW_DMA_0: return("MW DMA 0");
- case XFER_SW_DMA_2: return("SW DMA 2");
- case XFER_SW_DMA_1: return("SW DMA 1");
- case XFER_SW_DMA_0: return("SW DMA 0");
- case XFER_PIO_4: return("PIO 4");
- case XFER_PIO_3: return("PIO 3");
- case XFER_PIO_2: return("PIO 2");
- case XFER_PIO_1: return("PIO 1");
- case XFER_PIO_0: return("PIO 0");
- case XFER_PIO_SLOW: return("PIO SLOW");
- default: return("XFER ERROR");
- }
-}
-
-EXPORT_SYMBOL(ide_xfer_verbose);
-
-/**
- * ide_dma_speed - compute DMA speed
- * @drive: drive
- * @mode; intended mode
- *
- * Checks the drive capabilities and returns the speed to use
- * for the transfer. Returns -1 if the requested mode is unknown
- * (eg PIO)
- */
-
-u8 ide_dma_speed(ide_drive_t *drive, u8 mode)
-{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
- u8 speed = 0;
-
- if (drive->media != ide_disk && hwif->atapi_dma == 0)
- return 0;
-
- switch(mode) {
- case 0x04:
- if ((id->dma_ultra & 0x0040) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_6; break; }
- case 0x03:
- if ((id->dma_ultra & 0x0020) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_5; break; }
- case 0x02:
- if ((id->dma_ultra & 0x0010) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_4; break; }
- if ((id->dma_ultra & 0x0008) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_3; break; }
- case 0x01:
- if ((id->dma_ultra & 0x0004) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_2; break; }
- if ((id->dma_ultra & 0x0002) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_1; break; }
- if ((id->dma_ultra & 0x0001) &&
- (id->dma_ultra & hwif->ultra_mask))
- { speed = XFER_UDMA_0; break; }
- case 0x00:
- if ((id->dma_mword & 0x0004) &&
- (id->dma_mword & hwif->mwdma_mask))
- { speed = XFER_MW_DMA_2; break; }
- if ((id->dma_mword & 0x0002) &&
- (id->dma_mword & hwif->mwdma_mask))
- { speed = XFER_MW_DMA_1; break; }
- if ((id->dma_mword & 0x0001) &&
- (id->dma_mword & hwif->mwdma_mask))
- { speed = XFER_MW_DMA_0; break; }
- if ((id->dma_1word & 0x0004) &&
- (id->dma_1word & hwif->swdma_mask))
- { speed = XFER_SW_DMA_2; break; }
- if ((id->dma_1word & 0x0002) &&
- (id->dma_1word & hwif->swdma_mask))
- { speed = XFER_SW_DMA_1; break; }
- if ((id->dma_1word & 0x0001) &&
- (id->dma_1word & hwif->swdma_mask))
- { speed = XFER_SW_DMA_0; break; }
- }
-
-// printk("%s: %s: mode 0x%02x, speed 0x%02x\n",
-// __FUNCTION__, drive->name, mode, speed);
-
- return speed;
-}
-
-EXPORT_SYMBOL(ide_dma_speed);
-
-
-/**
- * ide_rate_filter - return best speed for mode
- * @mode: modes available
- * @speed: desired speed
- *
- * Given the available DMA/UDMA mode this function returns
- * the best available speed at or below the speed requested.
- */
-
-u8 ide_rate_filter (u8 mode, u8 speed)
-{
-#ifdef CONFIG_BLK_DEV_IDEDMA
- static u8 speed_max[] = {
- XFER_MW_DMA_2, XFER_UDMA_2, XFER_UDMA_4,
- XFER_UDMA_5, XFER_UDMA_6
- };
-
-// printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
-
- /* So that we remember to update this if new modes appear */
- if (mode > 4)
- BUG();
- return min(speed, speed_max[mode]);
-#else /* !CONFIG_BLK_DEV_IDEDMA */
- return min(speed, (u8)XFER_PIO_4);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-}
-
-EXPORT_SYMBOL(ide_rate_filter);
-
-int ide_dma_enable (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hd_driveid *id = drive->id;
-
- return ((int) ((((id->dma_ultra >> 8) & hwif->ultra_mask) ||
- ((id->dma_mword >> 8) & hwif->mwdma_mask) ||
- ((id->dma_1word >> 8) & hwif->swdma_mask)) ? 1 : 0));
-}
-
-EXPORT_SYMBOL(ide_dma_enable);
-
-/*
- * Standard (generic) timings for PIO modes, from ATA2 specification.
- * These timings are for access to the IDE data port register *only*.
- * Some drives may specify a mode, while also specifying a different
- * value for cycle_time (from drive identification data).
- */
-const ide_pio_timings_t ide_pio_timings[6] = {
- { 70, 165, 600 }, /* PIO Mode 0 */
- { 50, 125, 383 }, /* PIO Mode 1 */
- { 30, 100, 240 }, /* PIO Mode 2 */
- { 30, 80, 180 }, /* PIO Mode 3 with IORDY */
- { 25, 70, 120 }, /* PIO Mode 4 with IORDY */
- { 20, 50, 100 } /* PIO Mode 5 with IORDY (nonstandard) */
-};
-
-EXPORT_SYMBOL_GPL(ide_pio_timings);
-
-/*
- * Shared data/functions for determining best PIO mode for an IDE drive.
- * Most of this stuff originally lived in cmd640.c, and changes to the
- * ide_pio_blacklist[] table should be made with EXTREME CAUTION to avoid
- * breaking the fragile cmd640.c support.
- */
-
-/*
- * Black list. Some drives incorrectly report their maximal PIO mode,
- * at least in respect to CMD640. Here we keep info on some known drives.
- */
-static struct ide_pio_info {
- const char *name;
- int pio;
-} ide_pio_blacklist [] = {
-/* { "Conner Peripherals 1275MB - CFS1275A", 4 }, */
- { "Conner Peripherals 540MB - CFS540A", 3 },
-
- { "WDC AC2700", 3 },
- { "WDC AC2540", 3 },
- { "WDC AC2420", 3 },
- { "WDC AC2340", 3 },
- { "WDC AC2250", 0 },
- { "WDC AC2200", 0 },
- { "WDC AC21200", 4 },
- { "WDC AC2120", 0 },
- { "WDC AC2850", 3 },
- { "WDC AC1270", 3 },
- { "WDC AC1170", 1 },
- { "WDC AC1210", 1 },
- { "WDC AC280", 0 },
-/* { "WDC AC21000", 4 }, */
- { "WDC AC31000", 3 },
- { "WDC AC31200", 3 },
-/* { "WDC AC31600", 4 }, */
-
- { "Maxtor 7131 AT", 1 },
- { "Maxtor 7171 AT", 1 },
- { "Maxtor 7213 AT", 1 },
- { "Maxtor 7245 AT", 1 },
- { "Maxtor 7345 AT", 1 },
- { "Maxtor 7546 AT", 3 },
- { "Maxtor 7540 AV", 3 },
-
- { "SAMSUNG SHD-3121A", 1 },
- { "SAMSUNG SHD-3122A", 1 },
- { "SAMSUNG SHD-3172A", 1 },
-
-/* { "ST51080A", 4 },
- * { "ST51270A", 4 },
- * { "ST31220A", 4 },
- * { "ST31640A", 4 },
- * { "ST32140A", 4 },
- * { "ST3780A", 4 },
- */
- { "ST5660A", 3 },
- { "ST3660A", 3 },
- { "ST3630A", 3 },
- { "ST3655A", 3 },
- { "ST3391A", 3 },
- { "ST3390A", 1 },
- { "ST3600A", 1 },
- { "ST3290A", 0 },
- { "ST3144A", 0 },
- { "ST3491A", 1 }, /* reports 3, should be 1 or 2 (depending on */
- /* drive) according to Seagates FIND-ATA program */
-
- { "QUANTUM ELS127A", 0 },
- { "QUANTUM ELS170A", 0 },
- { "QUANTUM LPS240A", 0 },
- { "QUANTUM LPS210A", 3 },
- { "QUANTUM LPS270A", 3 },
- { "QUANTUM LPS365A", 3 },
- { "QUANTUM LPS540A", 3 },
- { "QUANTUM LIGHTNING 540A", 3 },
- { "QUANTUM LIGHTNING 730A", 3 },
-
- { "QUANTUM FIREBALL_540", 3 }, /* Older Quantum Fireballs don't work */
- { "QUANTUM FIREBALL_640", 3 },
- { "QUANTUM FIREBALL_1080", 3 },
- { "QUANTUM FIREBALL_1280", 3 },
- { NULL, 0 }
-};
-
-/**
- * ide_scan_pio_blacklist - check for a blacklisted drive
- * @model: Drive model string
- *
- * This routine searches the ide_pio_blacklist for an entry
- * matching the start/whole of the supplied model name.
- *
- * Returns -1 if no match found.
- * Otherwise returns the recommended PIO mode from ide_pio_blacklist[].
- */
-
-static int ide_scan_pio_blacklist (char *model)
-{
- struct ide_pio_info *p;
-
- for (p = ide_pio_blacklist; p->name != NULL; p++) {
- if (strncmp(p->name, model, strlen(p->name)) == 0)
- return p->pio;
- }
- return -1;
-}
-
-/**
- * ide_get_best_pio_mode - get PIO mode from drive
- * @driver: drive to consider
- * @mode_wanted: preferred mode
- * @max_mode: highest allowed
- * @d: pio data
- *
- * This routine returns the recommended PIO settings for a given drive,
- * based on the drive->id information and the ide_pio_blacklist[].
- * This is used by most chipset support modules when "auto-tuning".
- *
- * Drive PIO mode auto selection
- */
-
-u8 ide_get_best_pio_mode (ide_drive_t *drive, u8 mode_wanted, u8 max_mode, ide_pio_data_t *d)
-{
- int pio_mode;
- int cycle_time = 0;
- int use_iordy = 0;
- struct hd_driveid* id = drive->id;
- int overridden = 0;
- int blacklisted = 0;
-
- if (mode_wanted != 255) {
- pio_mode = mode_wanted;
- } else if (!drive->id) {
- pio_mode = 0;
- } else if ((pio_mode = ide_scan_pio_blacklist(id->model)) != -1) {
- overridden = 1;
- blacklisted = 1;
- use_iordy = (pio_mode > 2);
- } else {
- pio_mode = id->tPIO;
- if (pio_mode > 2) { /* 2 is maximum allowed tPIO value */
- pio_mode = 2;
- overridden = 1;
- }
- if (id->field_valid & 2) { /* drive implements ATA2? */
- if (id->capability & 8) { /* drive supports use_iordy? */
- use_iordy = 1;
- cycle_time = id->eide_pio_iordy;
- if (id->eide_pio_modes & 7) {
- overridden = 0;
- if (id->eide_pio_modes & 4)
- pio_mode = 5;
- else if (id->eide_pio_modes & 2)
- pio_mode = 4;
- else
- pio_mode = 3;
- }
- } else {
- cycle_time = id->eide_pio;
- }
- }
-
-#if 0
- if (drive->id->major_rev_num & 0x0004) printk("ATA-2 ");
-#endif
-
- /*
- * Conservative "downgrade" for all pre-ATA2 drives
- */
- if (pio_mode && pio_mode < 4) {
- pio_mode--;
- overridden = 1;
-#if 0
- use_iordy = (pio_mode > 2);
-#endif
- if (cycle_time && cycle_time < ide_pio_timings[pio_mode].cycle_time)
- cycle_time = 0; /* use standard timing */
- }
- }
- if (pio_mode > max_mode) {
- pio_mode = max_mode;
- cycle_time = 0;
- }
- if (d) {
- d->pio_mode = pio_mode;
- d->cycle_time = cycle_time ? cycle_time : ide_pio_timings[pio_mode].cycle_time;
- d->use_iordy = use_iordy;
- d->overridden = overridden;
- d->blacklisted = blacklisted;
- }
- return pio_mode;
-}
-
-EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
-
/**
* ide_toggle_bounce - handle bounce buffering
* @drive: drive to update
* Enable or disable bounce buffering for the device. Drives move
* between PIO and DMA and that changes the rules we need.
*/
-
+
void ide_toggle_bounce(ide_drive_t *drive, int on)
{
u64 addr = BLK_BOUNCE_HIGH; /* dma64_addr_t */
- if (on && drive->media == ide_disk) {
- if (!PCI_DMA_BUS_IS_PHYS)
- addr = BLK_BOUNCE_ANY;
- else if (HWIF(drive)->pci_dev)
- addr = HWIF(drive)->pci_dev->dma_mask;
+ if (!PCI_DMA_BUS_IS_PHYS) {
+ addr = BLK_BOUNCE_ANY;
+ } else if (on && drive->media == ide_disk) {
+ struct device *dev = drive->hwif->dev;
+
+ if (dev && dev->dma_mask)
+ addr = *dev->dma_mask;
}
if (drive->queue)
blk_queue_bounce_limit(drive->queue, addr);
}
-/**
- * ide_set_xfer_rate - set transfer rate
- * @drive: drive to set
- * @speed: speed to attempt to set
- *
- * General helper for setting the speed of an IDE device. This
- * function knows about user enforced limits from the configuration
- * which speedproc() does not. High level drivers should never
- * invoke speedproc() directly.
- */
-
-int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
+u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
{
-#ifndef CONFIG_BLK_DEV_IDEDMA
- rate = min(rate, (u8) XFER_PIO_4);
-#endif
- if(HWIF(drive)->speedproc)
- return HWIF(drive)->speedproc(drive, rate);
- else
- return -1;
-}
-
-EXPORT_SYMBOL_GPL(ide_set_xfer_rate);
+ struct ide_taskfile *tf = &cmd->tf;
+ u32 high, low;
-static void ide_dump_opcode(ide_drive_t *drive)
-{
- struct request *rq;
- u8 opcode = 0;
- int found = 0;
+ low = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
+ if (lba48) {
+ tf = &cmd->hob;
+ high = (tf->lbah << 16) | (tf->lbam << 8) | tf->lbal;
+ } else
+ high = tf->device & 0xf;
- spin_lock(&ide_lock);
- rq = NULL;
- if (HWGROUP(drive))
- rq = HWGROUP(drive)->rq;
- spin_unlock(&ide_lock);
- if (!rq)
- return;
- if (rq->flags & (REQ_DRIVE_CMD | REQ_DRIVE_TASK)) {
- char *args = rq->buffer;
- if (args) {
- opcode = args[0];
- found = 1;
- }
- } else if (rq->flags & REQ_DRIVE_TASKFILE) {
- ide_task_t *args = rq->special;
- if (args) {
- task_struct_t *tf = (task_struct_t *) args->tfRegister;
- opcode = tf->command;
- found = 1;
- }
- }
+ return ((u64)high << 24) | low;
+}
+EXPORT_SYMBOL_GPL(ide_get_lba_addr);
- printk("ide: failed opcode was: ");
- if (!found)
- printk("unknown\n");
+static void ide_dump_sector(ide_drive_t *drive)
+{
+ struct ide_cmd cmd;
+ struct ide_taskfile *tf = &cmd.tf;
+ u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
+
+ memset(&cmd, 0, sizeof(cmd));
+ if (lba48) {
+ cmd.valid.in.tf = IDE_VALID_LBA;
+ cmd.valid.in.hob = IDE_VALID_LBA;
+ cmd.tf_flags = IDE_TFLAG_LBA48;
+ } else
+ cmd.valid.in.tf = IDE_VALID_LBA | IDE_VALID_DEVICE;
+
+ ide_tf_readback(drive, &cmd);
+
+ if (lba48 || (tf->device & ATA_LBA))
+ printk(KERN_CONT ", LBAsect=%llu",
+ (unsigned long long)ide_get_lba_addr(&cmd, lba48));
else
- printk("0x%02x\n", opcode);
+ printk(KERN_CONT ", CHS=%d/%d/%d", (tf->lbah << 8) + tf->lbam,
+ tf->device & 0xf, tf->lbal);
}
-static u8 ide_dump_ata_status(ide_drive_t *drive, const char *msg, u8 stat)
+static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long flags;
- u8 err = 0;
-
- local_irq_set(flags);
- printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (stat & BUSY_STAT)
- printk("Busy ");
- else {
- if (stat & READY_STAT) printk("DriveReady ");
- if (stat & WRERR_STAT) printk("DeviceFault ");
- if (stat & SEEK_STAT) printk("SeekComplete ");
- if (stat & DRQ_STAT) printk("DataRequest ");
- if (stat & ECC_STAT) printk("CorrectedError ");
- if (stat & INDEX_STAT) printk("Index ");
- if (stat & ERR_STAT) printk("Error ");
+ printk(KERN_CONT "{ ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "DriveStatusError ");
+ if (err & ATA_ICRC)
+ printk(KERN_CONT "%s",
+ (err & ATA_ABORTED) ? "BadCRC " : "BadSector ");
+ if (err & ATA_UNC)
+ printk(KERN_CONT "UncorrectableError ");
+ if (err & ATA_IDNF)
+ printk(KERN_CONT "SectorIdNotFound ");
+ if (err & ATA_TRK0NF)
+ printk(KERN_CONT "TrackZeroNotFound ");
+ if (err & ATA_AMNF)
+ printk(KERN_CONT "AddrMarkNotFound ");
+ printk(KERN_CONT "}");
+ if ((err & (ATA_BBK | ATA_ABORTED)) == ATA_BBK ||
+ (err & (ATA_UNC | ATA_IDNF | ATA_AMNF))) {
+ struct request *rq = drive->hwif->rq;
+
+ ide_dump_sector(drive);
+
+ if (rq)
+ printk(KERN_CONT ", sector=%llu",
+ (unsigned long long)blk_rq_pos(rq));
}
- printk("}\n");
- if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) {
- err = hwif->INB(IDE_ERROR_REG);
- printk("%s: %s: error=0x%02x { ", drive->name, msg, err);
- if (err & ABRT_ERR) printk("DriveStatusError ");
- if (err & ICRC_ERR)
- printk((err & ABRT_ERR) ? "BadCRC " : "BadSector ");
- if (err & ECC_ERR) printk("UncorrectableError ");
- if (err & ID_ERR) printk("SectorIdNotFound ");
- if (err & TRK0_ERR) printk("TrackZeroNotFound ");
- if (err & MARK_ERR) printk("AddrMarkNotFound ");
- printk("}");
- if ((err & (BBD_ERR | ABRT_ERR)) == BBD_ERR ||
- (err & (ECC_ERR|ID_ERR|MARK_ERR))) {
- if (drive->addressing == 1) {
- __u64 sectors = 0;
- u32 low = 0, high = 0;
- low = ide_read_24(drive);
- hwif->OUTB(drive->ctl|0x80, IDE_CONTROL_REG);
- high = ide_read_24(drive);
- sectors = ((__u64)high << 24) | low;
- printk(", LBAsect=%llu, high=%d, low=%d",
- (unsigned long long) sectors,
- high, low);
- } else {
- u8 cur = hwif->INB(IDE_SELECT_REG);
- if (cur & 0x40) { /* using LBA? */
- printk(", LBAsect=%ld", (unsigned long)
- ((cur&0xf)<<24)
- |(hwif->INB(IDE_HCYL_REG)<<16)
- |(hwif->INB(IDE_LCYL_REG)<<8)
- | hwif->INB(IDE_SECTOR_REG));
- } else {
- printk(", CHS=%d/%d/%d",
- (hwif->INB(IDE_HCYL_REG)<<8) +
- hwif->INB(IDE_LCYL_REG),
- cur & 0xf,
- hwif->INB(IDE_SECTOR_REG));
- }
- }
- if (HWGROUP(drive) && HWGROUP(drive)->rq)
- printk(", sector=%llu",
- (unsigned long long)HWGROUP(drive)->rq->sector);
- }
- printk("\n");
- }
- ide_dump_opcode(drive);
- local_irq_restore(flags);
- return err;
+ printk(KERN_CONT "\n");
+}
+
+static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
+{
+ printk(KERN_CONT "{ ");
+ if (err & ATAPI_ILI)
+ printk(KERN_CONT "IllegalLengthIndication ");
+ if (err & ATAPI_EOM)
+ printk(KERN_CONT "EndOfMedia ");
+ if (err & ATA_ABORTED)
+ printk(KERN_CONT "AbortedCommand ");
+ if (err & ATA_MCR)
+ printk(KERN_CONT "MediaChangeRequested ");
+ if (err & ATAPI_LFS)
+ printk(KERN_CONT "LastFailedSense=0x%02x ",
+ (err & ATAPI_LFS) >> 4);
+ printk(KERN_CONT "}\n");
}
/**
- * ide_dump_atapi_status - print human readable atapi status
+ * ide_dump_status - translate ATA/ATAPI error
* @drive: drive that status applies to
* @msg: text message to print
* @stat: status byte to decode
*
* Error reporting, in human readable form (luxurious, but a memory hog).
+ * Combines the drive name, message and status byte to provide a
+ * user understandable explanation of the device error.
*/
-static u8 ide_dump_atapi_status(ide_drive_t *drive, const char *msg, u8 stat)
+u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
{
- unsigned long flags;
-
- atapi_status_t status;
- atapi_error_t error;
+ u8 err = 0;
- status.all = stat;
- error.all = 0;
- local_irq_set(flags);
- printk("%s: %s: status=0x%02x { ", drive->name, msg, stat);
- if (status.b.bsy)
- printk("Busy ");
+ printk(KERN_ERR "%s: %s: status=0x%02x { ", drive->name, msg, stat);
+ if (stat & ATA_BUSY)
+ printk(KERN_CONT "Busy ");
else {
- if (status.b.drdy) printk("DriveReady ");
- if (status.b.df) printk("DeviceFault ");
- if (status.b.dsc) printk("SeekComplete ");
- if (status.b.drq) printk("DataRequest ");
- if (status.b.corr) printk("CorrectedError ");
- if (status.b.idx) printk("Index ");
- if (status.b.check) printk("Error ");
+ if (stat & ATA_DRDY)
+ printk(KERN_CONT "DriveReady ");
+ if (stat & ATA_DF)
+ printk(KERN_CONT "DeviceFault ");
+ if (stat & ATA_DSC)
+ printk(KERN_CONT "SeekComplete ");
+ if (stat & ATA_DRQ)
+ printk(KERN_CONT "DataRequest ");
+ if (stat & ATA_CORR)
+ printk(KERN_CONT "CorrectedError ");
+ if (stat & ATA_IDX)
+ printk(KERN_CONT "Index ");
+ if (stat & ATA_ERR)
+ printk(KERN_CONT "Error ");
}
- printk("}\n");
- if (status.b.check && !status.b.bsy) {
- error.all = HWIF(drive)->INB(IDE_ERROR_REG);
- printk("%s: %s: error=0x%02x { ", drive->name, msg, error.all);
- if (error.b.ili) printk("IllegalLengthIndication ");
- if (error.b.eom) printk("EndOfMedia ");
- if (error.b.abrt) printk("AbortedCommand ");
- if (error.b.mcr) printk("MediaChangeRequested ");
- if (error.b.sense_key) printk("LastFailedSense=0x%02x ",
- error.b.sense_key);
- printk("}\n");
+ printk(KERN_CONT "}\n");
+ if ((stat & (ATA_BUSY | ATA_ERR)) == ATA_ERR) {
+ err = ide_read_error(drive);
+ printk(KERN_ERR "%s: %s: error=0x%02x ", drive->name, msg, err);
+ if (drive->media == ide_disk)
+ ide_dump_ata_error(drive, err);
+ else
+ ide_dump_atapi_error(drive, err);
}
- ide_dump_opcode(drive);
- local_irq_restore(flags);
- return error.all;
-}
-/**
- * ide_dump_status - translate ATA/ATAPI error
- * @drive: drive the error occured on
- * @msg: information string
- * @stat: status byte
- *
- * Error reporting, in human readable form (luxurious, but a memory hog).
- * Combines the drive name, message and status byte to provide a
- * user understandable explanation of the device error.
- */
+ printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
+ drive->name, drive->hwif->cmd.tf.command);
-u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
-{
- if (drive->media == ide_disk)
- return ide_dump_ata_status(drive, msg, stat);
- return ide_dump_atapi_status(drive, msg, stat);
+ return err;
}
-
EXPORT_SYMBOL(ide_dump_status);
git://ftp.safe.ca / safe / jmp / linux-2.6 / blobdiff